new new new Encapsulated Weldable Strain Gages KHCX / KHCD / KHCV / KHCS / KHCR / KHCM / KHC / KCW For Stain Measurement at up to 950 C

Transcription

1 Encapsulated Weldable Strain Gages KHCX / KHCD / KHCV / KHCS / KHCR / KHCM / KHC / KCW For Stain Measurement at up to 950 C new new new Tel.: +49 (0) _ Fax: +49 (0) _ instruments@zse.de _ ZSE ELECTRONIC MESS-SYSTEME & SENSORTECHNIK GmbH _ Tel.: +49 (0) _ Fax: +49 (0) _ instruments@zse.de _

2 KYOWA Encapsulated Service support available: In case required, we are very experienced in providing a professional support in regard of HT Strain gage application service. Don t hesitate to call or write. We would be happy if we can be from any assistance. Contents Types and Typical Applications _ 3 Features of High-temperature Models _ 4 Temperature Compensation Method and Bridge Circuit (KHCS, KHCM, KHC) _ 5 Features of Normal-temperature Model _ 5 Optional Accessories Bridge Boxes DB-120A/L _ 6 Bridge Adapters _ 6 Compression Fitting _ 6 MI Cable Length Codes and Optional Accessories _ 6 High-temperature Encapsulated Weldable Strain Gages KHCX _ 7 KHCD _ 9 KHCV _ 10 KHCS _ 11 KHCR _ 12 KHCM _ 14 KHC _ 15 Normal-temperature Encapsulated Weldable Waterproof Foil Strain Gage KCW _ 17 Compact Spot Welder for Encapsulated Weldable Strain Gages _ 18 To Ensure Safe Usage of Encapsulated Weldable Strain Gages _ 19 ZSE ELECTRONIC MESS-SYSTEME & SENSORTECHNIK GmbH 2 _ 3

3 Weldable Strain Gages Types and Typical Applications 0 C 100 C 200 C 300 C 400 C 500 C 600 C 700 C 800 C 900 C C KHCX KHCD KHCV KHCS KHCR KHCM KHC KCW 100 C 500 C 650 C 750 C 750 C 850 C 850 C 950 C Static Strain Dynamic Strain Energy Thermal power plant boiler pumps Nuclear plant cooling pipes (pure water) Gas turbine combustors Nuclear reactor peripherals Thermal power plant heat exchangers Nuclear fuel rods Nuclear reactor cooling water pipes (natrium) High-temperature gas-turbine dynamic/ static wings High-temperature gas furnaces Boiler steam turbines High-speed bleeder reactors Plants & Large-scale Structures Transports Large-scale plant piping Underwater marine structures Underwater tests of marine reinforced structures Automotive suction blowers Car bodies (cold districts) Automotive cylinder heads Automotive pistons Steelmaking furnace peripherals Heat resistance tests of reinforced concrete structures Automotive exhaust manifolds Automotive exhaust muffl ers Automotive exhaust valves Automotive exhaust turbines Petrochemical reactors Heat treat furnaces Incinerators Marine turbines Aircraft jet engine turbines You need Strain Gages for temperatures between 100 and 500 C With the KFU, KH and KFH Series ZSE offers a range of high temperature foil strain gages. Have a look at *applicable over a limited period of time of approx. 9h at a operating temperature of approx. 850 C Tel.: +49 (0) _ Fax: +49 (0) _ instruments@zse.de _

4 ZSE ELECTRONIC MESS-SYSTEME & SENSORTECHNIK GmbH 4_5

5 Tel.: +49 (0) _ Fax: +49 (0) _ instruments@zse.de _

6 ZSE ELECTRONIC MESS-SYSTEME & SENSORTECHNIK GmbH 6 _ 7

7 Tel.: +49 (0) _ Fax: +49 (0) _ instruments@zse.de _

8 ZSE ELECTRONIC GmbH P.O. Box 1830 ZSE ELECTRONIC MESS-SYSTEME & SENSORTECHNIK GmbH 8 _ 9

9 Tel.: +49 (0) _ Fax: +49 (0) _ instruments@zse.de _

10 ZSE ELECTRONIC MESS-SYSTEME & SENSORTECHNIK GmbH 10 _ 11

11 Tel.: +49 (0) _ Fax: +49 (0) _ instruments@zse.de _

12 ZSE ELECTRONIC MESS-SYSTEME & SENSORTECHNIK GmbH 12 _ 13

13 Tel.: +49 (0) _ Fax: +49 (0) _ instruments@zse.de _

14 available with 5 mm and 10 mm gage length KHCM G15-11(13,16) KHCM G15-11(13,16) Gage type Uniaxial 2-element temperature-compensation type Resistive element Heat-resistant special alloy Sensing part Gage Gage length: 5 mm Flange Flange: 3(W) 10(L) mm, t = 0.1mm Material Sheath tube and flange: Inconel 600 (equivalent to JIS NCF600) Gage resistance Approx. 120 Ω Lead wire cable MI cable: 1.0mm by approx. 2 m long (std.), Inconel 600-sheathed 3-Cu-conductor cable Soft cable: ETFE-coated 3-conductor shielded cable, 1.7mm diameter by approx. 50 cm long Max. operating temp. Approx. 650 C for both static and dynamic strains Applicable linear 11, 13, / C or user-specified expansion coefficient Gage factor (sensing part only) Approx. 1.5 at room temperature Approx. 1.4 at 650 C Approx. 2.0 at room temperature Approx. 1.8 at 650 C Thermally-induced app. The estimated curve is shown in the test data sheet. strain Temp. comp. range 25 C to 650 C Operating -196 C to 650 C temperature range Drift Within ±20 μm/m/h (650 C) Within ±10 μm/m/h (650 C) Strain limit ±10000 μm/m at 650 C Fatigue life times at 650 C (with strain level ±500 μm/m) Max. allowable current 50 ma Min. mountable curvature 15 mm 20 mm radius Mounting Method Spot welding Adjusted to different temperature coefficients for common steel for Inconel 600 for stainless steel KHCM G15-11 C2MV KHCM G15-13 C2MV KHCM G15-16 C2MV ZSE ELECTRONIC MESS-SYSTEME & SENSORTECHNIK GmbH 14 _ 15

15 Tel.: +49 (0) _ Fax: +49 (0) _ instruments@zse.de _

16 ZSE ELECTRONIC MESS-SYSTEME & SENSORTECHNIK GmbH 16 _ 17

17 Also available: KCW G14-11 Full bridge version with applied 4-conductor chloroprene shielded cable _ Gage Resistance: 350 Ohm _ Gage Factor: > 4.0 _ Applicable linear expansion coefficient 11ppm/ C _ Water pressure Resistance: 1MPa for 24 hours further information at Tel.: +49 (0) _ Fax: +49 (0) _ instruments@zse.de _

18 ZSE ELECTRONIC MESS-SYSTEME & SENSORTECHNIK GmbH 18 _ 19

19 Service support available: In case required, we are very experienced in providing a professional support in regard of HT Strain gage application service. Don t hesitate to call or write. We would be happy if we can be from any assistance. Tel.: +49 (0) _ Fax: +49 (0) _ instruments@zse.de _

20 ZSE MESS-SYSTEME & SENSORTECHNIK GmbH In den Fressaeckern 28 _ Bietigheim-Bissingen _ Germany Fon: +49 (0) _ Fax: +49 (0) _ instruments@zse.de _