Product Withdrawal Notice

Transcription

1 Document Receipt Acknowledgement Date: Section: Name: Attention: TTI/FT WORTH/TX/HQ Document Number: E2Z1-C14E-AUA356 Date; Apr.,27,16 Dear. Valued Customer Product Withdrawal Notice Chip PTC Thermistor : PRF18_1RB / 2RB, PRF21_1RA / 2RA Series Thank you very much for your great and continued support for business with Murata. This is the official notification that some of our products will be discontinued as detailed below. Please review this, and indicate your feedback for this Notice in writing by Feedback Due. Also, please place Last Time Buy Order by the Last Time Order Due Date as needed. Your understanding and support are highly appreciated. 1. Product Type, Customer/Murata/Alternative Part Numbers: Product Type: Chip PTC Thermistor : PRF18_1RB / 2RB, PRF21_1RA / 2RA Series Please refer to the attached documents for detailed Part Numbers' information. 2. Reasons/Background: Leed-Free Solder Products with high solder heat resistance are commonly used in the market today, in order to protect the environment. Murara had released high solder heat resistance product: "5R* Series" in 7, which holds the same electric characteristics to '1R* and 2R* Series. Thus, we will withdraw '1R* and 2R* Series, replacing them by "5R* Series". 3. Product Withdrawal Schedule: Last Time Order Due (*): Oct.,31,17 End of Production: Mar.,31,18 Last Date of Shipment: Jun.,,18 *: Last Time Order is the subject to Minimum Order Quantity and Package Quantity. Order Cancel and Product Return can be accepted only in the case of quality issue. 4. Feedback Due: Sep.,,16 Please indicate your feedback to Murata in writing by the Feedback Due, whether you approve this Notice or need further discussion and/or adjustments with Murata. 5. Contact Window: Should you have any questions or concerns, please contact Murata Sales, Representative, or Distributor in your area. Truly Yours. Thank you. Murata Manufacturing, Co., Ltd. Sensor Products Division, Planning and Promotion Dept. Yuichiro Hayata

2 Confirmation Letter E2Z1-C14E-AUA356 Murata Manufacturing, Co., Ltd. TTI/FT WORTH/TX/HQ Product Withdrawal Confirmation Product Withdrawal detailed below is Subject to Further Discussion. Accepted. Product Type: Chip PTC Thermistor : PRF18_1RB / 2RB, PRF21_1RA / 2RA Series Last Time Order Due: Oct.,31,17 Comments, Questions, Requests, etc. Signature Date: (MM, DD, YYYY) Title: Name:

3 添付文書番号 /For Document Number: E2Z1-C14E-AUA356_SH 納入実績 Sales History 弊社に登録されている貴社品番は下記になります Please find the list below for the target part numbers which are registered as yours in Murata. (Customer Part Number) 下記に記載の無い貴社品番につきましても 弊社の対象品種については申し入れに含むことと致します Regardless of the list below, all part numbers shall be the target as far as they are categorized into the Product Type indicated in the Document. 代替品 : 基本的にサイズ / 電気特性は同等品となります 納品形態につきましては 個装ラミネート袋無しとなりますのでご了承願います Alternative PN:Basically, size / electrical characteristics will be equivalent. Replacement will be delivered with no individual packaging laminate bag. 口座番号 お客様名 貴社品番 弊社品番 納入数 ( 単位 : 個 ) 代替品 代替品の貴社品番 Account Customer Name Customer Murata Sales Quantity (Unit: pieces) Alternative Cust.PN of Part Number Part Number 'FY '11FY '12FY '13FY '14FY '15FY(Feb.) Part Number Alternative PN A48 GENTEX/NOCENT/ZEELAND/MI PRF18AS471QS2RB PRF18AS471QS5RB (nonexistance) A48 GENTEX/NOCENT/ZEELAND/MI PRF18BD471QS2RB PRF18BD471QS5RB (nonexistance) A356 TTI/FT WORTH/TX/HQ PRF18BC471QB1RB PRF18BC471QB5RB PRF18BC471QB5RB A356 TTI/FT WORTH/TX/HQ PRF18BA471QB1RB PRF18BA471QB5RB PRF18BA471QB5RB A356 TTI/FT WORTH/TX/HQ PRF18AR471QB1RB PRF18AR471QB1RB PRF18AR471QB5RB PRF18AR471QB5RB A356 TTI/FT WORTH/TX/HQ PRF18AR471QS2RB PRF18AR471QS2RB 4, 4, -4, PRF18AR471QS5RB (nonexistance) A356 TTI/FT WORTH/TX/HQ PRF18BA471QB1RB PRF18BA471QB1RB 8, 84, 18, 88,, PRF18BA471QB5RB PRF18BA471QB5RB A356 TTI/FT WORTH/TX/HQ PRF18BA471QB1RB'8314 PRF18BA471QB1RB PRF18BA471QB5RB PRF18BA471QB5RB A356 TTI/FT WORTH/TX/HQ PRF18BA471QS2RB PRF18BA471QS2RB PRF18BA471QS5RB (nonexistance) A356 TTI/FT WORTH/TX/HQ PRF18BB471QB1RB PRF18BB471QB1RB PRF18BB471QB5RB PRF18BB471QB5RB A356 TTI/FT WORTH/TX/HQ PRF18BC471QB1RB PRF18BC471QB1RB 4, 4, 8, 8, 4, PRF18BC471QB5RB PRF18BC471QB5RB A356 TTI/FT WORTH/TX/HQ PRF18BC471RB1RB PRF18BC471RB1RB PRF18BC471RB5RB (nonexistance) A356 TTI/FT WORTH/TX/HQ PRF18BD471QB1RB PRF18BD471QB1RB 8, 16, 4, PRF18BD471QB5RB (nonexistance) A356 TTI/FT WORTH/TX/HQ PRF18BE471QB1RB PRF18BE471QB1RB 4, 4, -4, PRF18BE471QB5RB PRF18BE471QB5RB A356 TTI/FT WORTH/TX/HQ PRF18BF471QB1RB PRF18BF471QB1RB 8, 4, 4, PRF18BF471QB5RB PRF18BF471QB5RB A356 TTI/FT WORTH/TX/HQ PRF18BG471QB1RB PRF18BG471QB1RB PRF18BG471QB5RB PRF18BG471QB5RB A356 TTI/FT WORTH/TX/HQ PRF18BG471QS2RB PRF18BG471QS2RB PRF18BG471QS5RB (nonexistance) A356 TTI/FT WORTH/TX/HQ PRF21AR471QB1RA PRF21AR471QB1RA PRF21AR471QB5RA (nonexistance) A356 TTI/FT WORTH/TX/HQ PRF21BA471QB1RA PRF21BA471QB1RA 4, PRF21BA471QB5RA (nonexistance) A356 TTI/FT WORTH/TX/HQ PRF21BB471QB1RA PRF21BB471QB1RA -4, -4, PRF21BB471QB5RA (nonexistance) A356 TTI/FT WORTH/TX/HQ PRF21BC471QB1RA PRF21BC471QB1RA PRF21BC471QB5RA (nonexistance) A356 TTI/FT WORTH/TX/HQ PRF21AR471QB1RA PRF21AR471QB5RA (nonexistance) A356 TTI/FT WORTH/TX/HQ PRF21BA471QB1RA PRF21BA471QB5RA (nonexistance) A356 TTI/FT WORTH/TX/HQ PRF21BB471QB1RA PRF21BB471QB5RA (nonexistance) A356 TTI/FT WORTH/TX/HQ PRF21BC471QB1RA PRF21BC471QB5RA (nonexistance) A388 TTI/GENTEX/FORT WORTH/TX PRF18AS471QS2RB 924, 1,376, 744, 84, PRF18AS471QS5RB (nonexistance) A388 TTI/GENTEX/FORT WORTH/TX PRF18AS471QS2RB PRF18AS471QS2RB PRF18AS471QS5RB (nonexistance)

4

5

6

7

8

9 Data No.FSE687S September, 15 TEST DATA Part. No. PRF18BE471QS2RB (Current type) PRF18BE471QS5RB (New Ni plating type) 1. Adhesive strength 2. Vibration 3. Impact test 4. Resistance to bending of substance 5. Solderability 6. Resistance to soldering heat (Reflow) 7. Dry heat 8. Cold 9. Damp heat. Thermal shock 11. High temperature humidity load 12. High temperature load Sensor Products Division

10 Item Adhesive strength Condition : EIAJ ET-743 term 9 Prepare soldered PTC to PCB (#) and add the force of 5.N in the direction as shown below. PTC F F Sample Quantity : pcs Specification : There is no detachmentsign of electrode. No Note PRF18BE471QS2RB (Current type) Judgement No problem PRF18BE471QS5RB (Ni plating type) Judgement No problem # Above mentioned soldering is done following condition at our side. Standard land dimension Standard solder paste Standard solder profile Above conditions are mentioned in Specification. Date September, 15 Temp. 25 C

11 Item Vibration resistance Condition : JIS C 52 term 8.2 Pretreatment : Soldered PTC to PCB. (#) Vibration : A ~55~Hz (1min.) Width : 1.5mm Vibrate for 2 hrs. in each of 3 mutually perpendicular plane for a total of 6hrs. PTC Sample Quantity : pcs Specification : Resistance change not exceed ±% Normal appearance. PRF18BE471QS2RB (Current type) Appearance No. Before(ohm) After(ohm) Change(%) Judgement after the test No problem No problem Appearance No. Before(ohm) After(ohm) Change(%) Judgement after the test No problem No problem Note # Above mentioned soldering is done following condition at our side. Standard land dimension Standard solder paste Standard solder profile Above conditions are mentioned in Specification. Date September, 15 Temp. 25 C

12 Item Impact test [ Condition ] Reference standard: IEC (8) Soldered PTC to PCB (#) Acceleration: 149m/s 2 (15G) Duration time:.5ms Waveform :Half-sine In 6 directions perpendicularly intersecting each other (total 18 times) [ Sample Quantity ] pcs. [ Specification ] Resistance change: Less than ±% Appearance: No defects or abnormalities PRF18BE471QS2RB (Current type) Appearance No. Before(ohm) After(ohm) Change(%) Judgement after the test No problem No problem Appearance No. Before(ohm) After(ohm) Change(%) Judgement after the test No problem No problem Note # Above mentioned soldering is done following condition at our side. Standard land dimension Standard solder paste Standard solder profile Above conditions are mentioned in Specification. Date September, 15 Temp. 25 C

13 Item Resistance to bending of substance Condition : Reference standard: IEC (1999) Soldered PTC on Test Board (#), and apply force on back side of Test Board as shown below. Bending Speed : 1.mm/s Bending Strength : 2.mm Hold time : 5+/-1sec Board Dimension : *4*1.6t mm Board Material : Glass Epoxy R34 5 Force Unit: mm Sample Quantity : pcs. 45+/-2 Specification : Resistance change is less than +/-%. There is No abnormal appearance after the test. PTC 45+/-2 Bending Strength PRF18BE471QS2RB (Current type) Appearance No. Before(ohm) After(ohm) Change(%) Judgement after the test No problem No problem Appearance No. Before(ohm) After(ohm) Change(%) Judgement after the test No problem No problem Note # Above mentioned soldering is done following condition at our side. Standard land dimension Standard solder paste Standard solder profile Above conditions are mentioned in Specification. Date September, 15 Temp. 25 C

14 Item Solderability Condition : JIS C (1996) Solder temp. : 2±5 C Solder : Sn 6% / Pb 4% Soaking time : 3±.5secs. Soaking position: Until a whole electrode is soaked. Sample Quantity : pcs Specification : Resistance change not exceed ±% Min. 75% (Current type) / Min. 95% (Ni plating type) electrodes covered with new solder. PRF18BE471QS2RB (Current type) Appearance No. Before(ohm) After(ohm) Change(%) Judgement after the test No problem No problem Appearance No. Before(ohm) After(ohm) Change(%) Judgement after the test No problem No problem Note Date September, 15 Temp. 25 C

15 Item Soldering heat resistance Condition : IEC Preheating : 15±5 C 3mins Solder temp. : 26±5 C Solder : Sn-3.Ag-.5Cu Flax : containing less than.2wt% of chlorine. Soaking time : ±.5secs. Soaking position : Until a whole electrode is soaked. Sample Quantity : pcs Specification : Resistance change not exceed ±% Nomal appearance on the section showed by slanting line parts of the electrodes on the figure. (*Current type) No visible damage. (Ni plating type) PRF18BE471QS2RB (Current type) Appearance No. Before(ohm) After(ohm) Change(%) Judgement after the test No problem No problem Appearance No. Before(ohm) After(ohm) Change(%) Judgement after the test No problem No problem Note *Figure electrode PTC Date September, 15 Temp. 25 C

16 Item Dry heat resistance Condition : +15±2 C leave Pretreatment : Soldered PTC to PCB. (#) Sample Quantity : pcs Specification : Resistance change not exceed ±% (hrs) Normal appearance PRF18BE471QS2RB(Current type) Note PRF18BE471QS5RB(Ni plating type) 1 # Above mentioned soldering is done following condition at our side. Standard land dimension Standard solder paste Standard solder profile Above conditions are mentioned in Specification. Date September, 15 Temp. 25 C

17 Item Cold resistance Condition : -±3 C leave Pretreatment : Soldered PTC to PCB. (#) Sample Quantity : pcs Specification : Resistance change not exceed ±% (hrs) Normal appearance PRF18BE471QS2RB(Current type) Note PRF18BE471QS5RB(Ni plating type) 1 # Above mentioned soldering is done following condition at our side. Standard land dimension Standard solder paste Standard solder profile Above conditions are mentioned in Specification. Date September, 15 Temp. 25 C

18 Item Damp heat resistance Condition : +4±2 C, 9 to 95%RH leave Pretreatment : Soldered PTC to PCB. (#) Sample Quantity : pcs Specification : Resistance change not exceed ±% (5hrs) Normal appearance PRF18BE471QS2RB(Current type) 1 PRF18BE471QS5RB(Ni plating type) Note 1 # Above mentioned soldering is done following condition at our side. Standard land dimension Standard solder paste Standard solder profile Above conditions are mentioned in Specification. Date September, 15 Temp. 25 C

19 Item Thermal shock (1) Condition: IEC (9) Step Temp. ( C) Time (min.) 1-55+, , - Pretreatment:Soldered PTC to PCB. (#) Sample No. : pcs. Specification : Resistance change is less than +/-%. There is No abnormal appearance after the test PRF18BE471QS2RB(Current type) 1 PRF18BE471QS5RB(Ni plating type) Note 1 # Above mentioned soldering is done following condition at our side. Standard land dimension Standard solder paste Standard solder profile Above conditions are mentioned in Specification. Date September, 15 Temp. 25 C

20 Item Thermal shock (2) Condition: IEC (9) Step Temp. ( C) Time (min.) 1-55+, , - Pretreatment:Soldered PTC to PCB. (#) Sample No. : pcs. Specification : Resistance change is less than +/-%. There is No abnormal appearance after the test PRF18BE471QS2RB(Current type) 1 PRF18BE471QS5RB(Ni plating type) Note 1 # Above mentioned soldering is done following condition at our side. Standard land dimension Standard solder paste Standard solder profile Above conditions are mentioned in Specification. Date September, 15 Temp. 25 C

21 Item High temperature humidity load Condition : Reference standard: IEC (1995) Soldered PTC to PCB. (#) +85±2 C, 8±5%RH (in air), load max. +48 / - hrs. Sample Quantity : pcs Specification : Resistance change not exceed ±% (hrs) Normal appearance PRF18BE471QS2RB(Current type) 1 PRF18BE471QS5RB(Ni plating type) Note # Above mentioned soldering is done following condition at our side. Standard land dimension Standard solder paste Standard solder profile Above conditions are mentioned in Specification. Date September, 15 Temp. 25 C

22 Item High temperature load Condition : 85±3 C (in air), load max. operating voltage Pretreatment : Soldered PTC to PCB. (#) Sample Quantity : pcs Specification : Resistance change not exceed ±% (hrs) Normal appearance PRF18BE471QS2RB(Current type) 1 PRF18BE471QS5RB(Ni plating type) Note # Above mentioned soldering is done following condition at our side. Standard land dimension Standard solder paste Standard solder profile Above conditions are mentioned in Specification. Date September, 15 Temp. 25 C