NOT CLASSIFIED AS HAZARDOUS ACCORDING TO CRITERIA OF NOHSC. Depileve Vitalderm ph Cream. International Beauty Supplies

Transcription

1 1. IDENTIFICATION OF THE PREPARATION AND THE COMPANY Product name Product code Product use Company Address Depileve Vitalderm ph Cream VEDEVD200 Pre and Post Wax Lotion International Beauty Supplies 6e Narabang Way, Belrose NSW, Australia 2085 Telephone number (02) Fax number (02) EMERGENCY TELEPHONE NUMBER Bill McKendrick Managing Director (BH) (02) (AH) HAZARDS IDENTIFICATION Not classified as hazardous according to criteria of NOHSC Not classified as a Dangerous Good according to the Australian Code for the Transport of Dangerous Goods by Road and Rail. Not classified as a Dangerous Good according to the International Air Transport Association (IATA) Dangerous Goods Regulations DANGERS FOR HUMAN: This product may burn over its ignition point (>200ºC ). Only at high temperatures may product generate irritant vapours. Vapour inhalation may produce asthmatic reactions in a small percentage of the population. At high temperatures melted product may produce burns. 3. COMPOSITION / INFORMATION ON INGREDIENTS AQUA, GLYCERIN, OCTYLDODECELYL MYRISTATE DIMETHICONE, CAPRYLIC CAPRIC TRIGLICERIDE, CADELILLA/JOJOBA/RICE BRAN POLYGYLCERYL -3

2 ESTERS (AND) GLYCERL STEARATE (AND) CETARYL ALCOHOL (AND) SODIUM STEAROYL LACTYLATE, CETYL ALCOHOL, MAGNESIUM, ALUMINIUM SILICATE, BUTYLENE GLYCOL (AND) GLYCERIN (AND) HYDROLIZED ENTERMORPHA COMPRESSA, HYRDOGENATED PALM KERNEL GLYCERIDES (AND) HYDROGENATED PALM GLYCERIDES, PROPYLENE GLYCOL (AND) AQUA (AND) FUCUS VESICULOSUS EXTRACT, PROPYLENE GLYCOL (AND) AQUA (AND) AVENA SATIVA KERNEL EXTRACT (AND) SODIUM LAURETH SULFATE, PROPYLENE GLYCOL (AND) AQUA (AND) RUSCUS ACULEATUS EXTRACT, METHYLPARABEN (AND) HEXAMIDINE DISETHIONATE (AND) -2BROMO -2- NITROPROPANE 1.3 DIOL (AND) PROPYLPARABEN, TOCOPHERYL ACETATE, XANTHAN GUM, PARFUM, POLYSORBATE 20, SORBIC ACID. 4. FIRST AID MEASURES Route of exposure Inhalation It does not pose any risk when handled and used in the usual conditions. In case of overheating of big quantities of wax and without ventilation give the victim fresh air, in serious situations administer oxygen and keep medical attention. This product may burn over its ignition point (>200ºC ). Only at high temperatures may product generate irritant vapours. Vapour inhalation may produce asthmatic reactions in a small percentage of the population. At high temperatures melted product may produce burns. Ingestion It does not pose any risk when handled and used in the usual conditions. If it is swallowed call local poison control centre. Eye Contact The danger is in a contact with too hot product. Rinse away thoroughly with water. Do not try to pull the wax and seek medical attention. Skin Contact It does not pose any risk when handled and used in the usual conditions. The only risk is a contact burn when melted product is too hot. Cool the affected area with a generous quantity of water, do not try to pull the wax, cure the burn and in serious cases seek medical attention.

3 5. FIRE-FIGHTING MEASURES Suitable extinguishing media Dry chemical. Foam. Co2. Water spray. Unsuitable extinguishing media High press water. Special protective equipment for fire fighters Special risks from substance exposition to combustible products or dangerous vapours. The fume coming from the rosin may cause asthmatic crisis in a little percentage of the population. Wear self-breathing apparatus, special personal fire fighting protection equipment. 6. ACCIDENTAL RELEASE MEASURES Personal precautions: Before cleaning any spill or leak, individuals involved in spill cleanup must wear appropriate Personal Protective Equipment. If the product is melted keep personal away till the product solidification. When it is cold, collect it for recycling or elimination. Environmental precautions: Dispose of properly in accordance with local, state and federal regulations. In case of the product enter in sewers/public waters, notify environmental authorities. Methods for cleaning up For small spills (e.g., < 5 Litres), wear appropriate personal protective equipment (e.g., goggles, gloves). Maximize ventilation (open doors and windows). The product must be removed solidified, you can do it with a spade. Dispose of properly in accordance with local, state and federal regulations. Remove any contaminated clothing and wash thoroughly before reuse. For spills 5 Litres, deny entry to all unprotected individuals. Dike and contain spill with inert material (e.g., sand or earth). The product must be removed solidified, you can do it with a spade. Transfer product to containers for recovery or disposal and solid diking material to separate containers for proper disposal. Remove contaminated clothing promptly and wash affected skin areas with soap and water. Keep spills and cleaning runoffs out of municipal sewers and open bodies of water.

4 7. HANDLING AND STORAGE Handling Avoid eye contact. When the product is solidified there are not special measures for handling and storage. Storage Avoid storage temperatures higher than 30ºc. Use and store in a cool, dry, wellventilated location (e.g., local exhaust ventilation, fans). Do not store in damaged or unmarked containers or storage devices. Keep containers securely closed when not in use. Other information Spilled material may present a hazard if left unattended. Clean all spills promptly. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Respiratory protection: Eye protection: Hand protection Body protection None required if used in a well-ventillated area Avoid eye contact. Wear safety glasses conditions of use Protective Gloves None required under normal conditions of use Exposure limits Engineering controls 9. PHYSICAL AND CHEMICL PROPERTIES Appearance Sticky, viscous mass at room temperature; fluid liquid at high temperatures. Creamy Honey colour. Odour Resin, Characteristic. Drop Point 38.7 ºC +/-1.

5 10. STABILITY AND REACTIVITY Chemical stability Conditions to avoid Incompatible materials Hazardous decomposition products Hazardous reactions This product is stable Open flames, sparks, high heat and direct sunlight 11. TOXICOLOGICAL INFORMATION Toxicology data The product has not been tested for specific toxicity data Acute health hazards Ingestion Inhalation Skin Contact Eye Contact Chronic Health Hazards 12. ECOLOGICAL INFORMATION Ecotoxicity Persistence and degradability Mobility There is no specific data available for this product There is no specific data available for this product There is no specific data available for this product 13. DISPOSAL CONSIDERATIONS Product and container disposal Dispose of properly in accordance with local, state and federal regulations. Special precautions for landfill or incineration

6 14. TRANSPORT INFORMATION Not classified as a Dangerous Good according to the Australian Code for the Transport of Dangerous Goods by Road and Rail Not classified as a Dangerous Good according to the International Air Transport Association (IATA) Dangerous Goods Regulations 15. REGULATORY INFORMATION Poisons Schedule AICS Status Labelling Risk phrases Safety phrases 16. OTHER INFORMATION Initial preparation date Amendment date Reasons for change The information provided in this Material Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.end of MSDS.