The Convenience Stores For Metal

Transcription

1 STEEL BARS Data and Specifications C1018 Cold Finished Bar A low carbon steel with medium manganese content. Applications: Cold forming and bending operations (for severe bends stress relieving may be needed to prevent cracking); carburized parts requiring soft core and high surface hardness such as king pins, gears, dogs, etc. Also suitable for parts requiring cold forming such as crimping, swaging or bending. Analysis: C -.15/.20 Mn -.60/.90 P -.04 Max. S -.05 Max. Mechanical Properties: (following are minimum properties based on typical 1 bar). Conforms to ASTM A rd Cold 1 rd Hot Tensile Strength (psi) 64,000 58,000 Yield Point (psi) 54,000 36,000 Elongation (% in 2 ) Reduction of Area (%) 55 Brinell Hardness Machinability: 78% based on 1212 as 100%. Surface Cutting Speed: 130 ft/min. Weldability: Excellent by all processes forming extremely high quality joints and welds. Hardening: Standard carburizing methods. Hard case and tough core carburize at 1650º F º F for approx. 8 hrs. Oven cool. Reheat to 1400º F º F. Water quench and draw at 300º F - 350º F. C1045 Cold Finished Bar A medium carbon steel allowing higher strength properties than A wide range of properties can be obtained. Applications: Shafts, machinery parts, bolts, pinions, gears. Analysis: C -.43/.50 Mn -.60/.90 P -.04 Max. S -.05 Max. Mechanical Properties: (following are minimum properties based on typical 1 bar) 1 rd Tensile Strength (psi) 82,000 Yield Point (psi) 45,000 Elongation (% in 2 ) 16 Reduction of Area (%) 32 Brinell Hardness 162 Machinability: 64% based on 1212 as 100%. Surface Cutting Speed: ft/min. Weldability: Fair. With thin sections and flexible design, gas or arc welding may be used without preheating except in joints over 1/2 to 3/4 thick where preheating is necessary. For equivalent strength in a weld a low alloy filler is recommended. Stress relieving after is recommended. Grade of welding rod to be used depends on thickness of section, design, service requirement, etc. Hardening: Essentially water hardened (1550º F) although can be quenched in oil (1575º F). Wide range of mechanical properties obtained by tempering between 700º F to 1300º F. Avoid tempering between 500º F and 700º F metalsupermarkets.com 87

2 STEEL BARS Data and Specifications C1144 StressProof Cold Finished Bar Medium carbon-free machining steel severely cold reduced to improve mechanical properties. Its inherent strength without heat treatment is comparable to heat treated steels of equal hardness. Applications: Arbors, keyed shafts, spindles, gears, pinions, piston rods, sleeves, lead screws, racks, motor shafts, pump shafts, link pins, mandrels, boring bars, collets, bushings, drive shafts, armature shafts, king pins. Analysis: C -.40/.48 Mn /1.65 P -.04 Max. S -.24/.33 Mechanical Properties: (following are minimum properties based on typical 1 bar) Thru 2 Tensile Strength (psi) 115,000 Yield Point (psi) 100,000 Elongation (% in 2 ) 8 Reduction of Area (%) 25 Brinell Hardness 26 Machinability: 83% of B1112. Surface Cutting Speed: 140 ft/min. Weldability: None. StressProof is a registered trademark of the LaSalle Steel Co. C12L14 Cold Finished Bar - Screw Machine Stock The fastest machining steels available, this is essentially a resulfurized, rephosphorized screw stock with lead added. Applications: Bushings, inserts, couplings, hydraulic hose fittings. Analysis: C -.15 Max. Mn -.85/1.15 P -.04/.09 S -.26/.35 Pb -.15/.35 Mechanical Properties: (following are minimum properties based on typical 1 bar) 1 rd Tensile Strength (psi) 78,000 Yield Point (psi) 60,000 Elongation (% in 2 ) 15 Reduction of Area (%) 50 Brinell Hardness 163 Machinability: 193%. Surface Cutting Speed: 325 ft/min. Weldability: None due to high sulphur content. Hardening: Not considered a case hardening grade. Cold Finished Bars: Mechanical Properties Comparison Following are minimum properties based on typical 1 bar. Larger bars will typically have lower values. Cold rolled 1018 steel products conforms to ASTM A L H Hot Cold Tensile, ksi 58,000 64,000 82, ,000 78, ,000 Yield, ksi 36,000 54,000 45, ,000 60, ,000 Elongation, % Reduction of Area (%) Brinell Hardness metalsupermarkets.com

3 STEEL FLATS C1018 COLD FINISHED STEEL FLATS 1/8 X 1/ / / / / / / / / / / / / /16 X 1/ / / / / / / / / / / /16 X /4 X 3/ / / / / / / / / / / / / / / / / what you want, when you want the way you want metalsupermarkets.com 89

4 STEEL FLATS C1018 COLD FINISHED STEEL FLATS 5/16 X 3/ / / / / / / / / / / / / / / / / / /8 X 7/ / / / / / / / / / /8 X 3-1/ / / /16 X 1/ / / / / / /2 X 9/ / / / / / / / / / / metalsupermarkets.com

5 STEEL FLATS C1018 COLD FINISHED STEEL FLATS 1/2 X /16 X 5/ / / /8 X 11/ / / / / / / / / / / / /4 X 7/ / / / / / / /4 X / / /8 X 1-1/ / X 1-1/ / / / / / / / / / / / / metalsupermarkets.com 91

6 STEEL FLATS C1018 COLD FINISHED STEEL FLATS 1-1/4 X 1-1/ / / / / / / /2 X 1-3/ / / / /4 X / / / / / X 2-1/ / / / / /4 X 2-1/ / / / /2 X / / X 3-1/ metalsupermarkets.com

7 STEEL HEXAGONS COLD FINISHED STEEL HEXAGONS (inches) Lbs/ C1018 C12L14 3/ X X 7/ X 1/4.184 X X 9/ X 5/ X X 11/ X 3/8.414 X X 13/ X 7/ X X 1/2.736 X X 9/ X 5/ X X 11/ X X 3/ X X 13/ X X 7/ X X 15/ X X X X 1-1/ X 1-1/ X X 1-3/ X 1-1/ X X 1-5/ X 1-3/ X X 1-7/ X 1-1/ X X 1-9/ X 1-5/ X 1-11/ X 1-3/ X X 1-13/ X 1-7/ X 1-15/ X X X 2-1/ X 2-3/ X 2-1/ X X 2-1/ X X 2-5/ X 2-3/ X 2-7/ X X X metalsupermarkets.com 93

8 STEEL ROUNDS COLD FINISHED STEEL ROUNDS DIameter Lbs/ C1018 C1045 C12L14 C1144 1/8.042 X X 5/ X X 3/ X X 7/ X X 1/4.167 X X X 5/ X X X 3/8.375 X X X X 7/ X X X 1/2.668 X X X X 9/ X X X X 5/ X X X X 11/ X X 3/ X X X X 13/ X X X X 7/ X X X X 15/ X X X X X X X X 1-1/ X X 1-1/ X X X X 1-3/ X X X X 1-1/ X X X X 1-5/ X X X X 1-3/ X X X X 1-7/ X X X X 1-1/ X X X X 1-9/ X X X 1-5/ X X X 1-11/ X X X X 1-3/ X X X X 1-13/ X X X 1-7/ X X X X 1-15/ X X X X X X X 2-1/ X X 2-1/ X X X X 2-3/ X X X 2-1/ X X X X 2-5/ X X X 2-3/ X X X X 2-7/ X X 2-1/ X X X X 2-9/ X X 2-5/ X X X X metalsupermarkets.com

9 STEEL ROUNDS COLD FINISHED STEEL ROUNDS Diameter Lbs/ C1018 C1045 C12L14 C1144 (Inch) 2-11/ X X 2-3/ X X X X 2-13/ X X X 2-7/ X X X X 2-15/ X X X X X X 3-1/ X 3-1/ X X 3-3/ X 3-1/ X X X X 3-3/ X X X 3-7/ X 3-1/ X X X X 3-5/ X X 3-3/ X X X X 3-7/ X 3-15/ X X X X X 4-1/ X 4-1/ X X X 4-3/ X 4-1/ X X X X 4-5/ X 4-3/ X X X 4-7/ X 4-15/ X X X X X 5-1/ X 5-1/ X X X 5-3/ X X X X 6-1/ X 6-1/ X X X X 7-1/ X X X 8-1/ X X X 9-1/ X X X X metalsupermarkets.com 95

10 STEEL SHAFTING COLD FINISHED TURNED, GROUND AND POLISHED STEEL SHAFTING / X 3/ X X X X 1-1/ X X 1-3/ X X 1-1/ X X 1-5/ X 1-3/ X X 1-7/ X X 1-1/ X X 1-9/ X 1-5/ X 1-11/ X 1-3/ X X 1-7/ X 1-15/ X X X X 2-1/ X 2-3/ X X 2-1/ X 2-5/ X 2-3/ X 2-7/ X 2-1/ X X 2-5/ X 2-11/ X / X 2-7/ X 2-15/ X X X X 3-3/ X 3-1/ X 3-7/ X 3-1/ X X 3-11/ X 3-3/ X 3-15/ X X 4-1/ X 4-7/ X 4-1/ X 4-3/ X 4-15/ X X 5-1/ X 5-7/ X 5-1/ X 5-3/ X 5-15/ X X X X TOLERANCES , /8 to 1 Incl to /8 to 1-1/2 incl to /16 to 2-7/16 incl to /2 to 3 Incl to /16 to 4 Incl to /16 to 6 Incl to /16 to 8 Incl to We source hard to find metals. If you don t see what you re looking for, Call! metalsupermarkets.com

11 STEEL SQUARES COLD FINISHED STEEL SQUARES (inches) Lbs/ C1018 C12L14 C1215 1/8.053 X X 3/ X X X 1/4.213 X X X 5/ X X 3/8.478 X X X 7/ X X 1/2.850 X X X 9/ X X 5/ X X X 11/ X X 3/ X X X 7/ X X X 15/ X X X X 1-1/ X X X 1-3/ / X X X 1-5/ X 1-3/ X X X 1-7/ X 1-1/ X X X 1-5/ X 1-3/ X X X 1-7/ X X X X 2-1/ X 2-1/ X 2-3/ X 2-1/ X X X 2-5/ X 2-3/ X X X 3-1/ X 3-1/ X 3-3/ X X 4-1/ X X 5-1/ X X metalsupermarkets.com 97

12 There is no upside to down time Wide variety of metals in rod, bar, sheet, plate, structural, tube & pipe. Stores coast-to-coast No minimums Same day delivery or pickup One stop shopping for any metal, cut and ready, fast! Call for your nearest Metal Supermarkets store location or visit us at metalsupermarkets.com.