ABRASIVES BRUSHES & FLAP DISCS HONING TOOLS GRINDING WHEELS, CUT-OFF WHEELS QUICK CHANGE DISCS CUT-OFF WHEELS

Transcription

1 ABRASIVES BRUSHES & FLAP DISCS HONING TOOLS GRINDING WHEELS, CUT-OFF WHEELS QUICK CHANGE DISCS CUT-OFF WHEELS FLAP DISCS, PSA DISCS QUICK CHANGE DISCS, BRITE RITE NON-WOVEN Brushes Cartridge Rolls Cut-Off Wheels Depressed Center Wheels Diamond Tools & Wheels Flap Discs , 339 Flap Wheels Grinding Wheels Honing Tools Mounted Points , 341 Non-Woven PSA Discs Quick Change Discs... 39, 33 Resin Fibre Discs Shop Rolls & Sheets BACKING PADS 97

2 Flex-Hone Tools Flex-Hone Tools Use on valve guides, cam bearing bores, main bearing The Flex-Hone Tool is resilient, flexible honing tool The Flex-Hone Tool removes peaks and other bores, lifter bores, pneumatic cylinders, engine cylinders, with soft cutting action. It s unique construction allows imperfections in cylinder walls, creating a desirable brake cylinders, drums and rotors, hydraulic guides, the abrasive globules or stones to float, assuring the plateaued finish. The result is reduction in localized pumps, and compressors. tool will be self-centering, self-aligning to the bore and heat and friction and improved performance. self-compensating for wear. Standard Duty Flex-Hones 4mm 3/16 are 6 OAL 5mm 3 are 8 OAL 3-1/4 4-5/8 are 13-1/ Silicon Carbide 10 GRIT 180 GRIT 40 GRIT 30 GRIT FLEX-HONE BORE ORDER PRICE ORDER PRICE ORDER PRICE ORDER PRICE MODEL NO. SIZE NO. EACH NO. EACH NO. EACH NO. EACH BC-4MM (0.157) $ $ $5.30 BC-4.5MM (0.177) BC-3/16 (4.75MM) BC-5MM (0.197) $ BC-5.5MM (0.17) BC-6.4MM (0.5) BC-7MM (0.76) BC-8MM (0.315) BC-9MM (0.354) BC-9.5MM (0.375) BC-10MM (0.394) BC-11MM (0.433) BC-1MM (0.47) BC-1/ (1.7MM) BC-14MM (0.55) BC-5/8 (16MM) BC-18MM (0.709) BC-3/4 (19MM) BC-0MM (0.787) BC-7/8 (MM) BC-15/16 (3.8MM) BC-1 (5.4MM) BC-1-1/8 (9MM) BC-1-1/4 (31.8MM) BC1-3/8 (35MM) BC-1-1/ (38MM) BC-1-5/8 (41MM) BC-1-3/4 (45MM) BC-1-7/8 (48MM) BC- (51MM) BC--1/8 (54MM) BC--1/4 (57MM) BC--3/8 (60MM) BC--1/ (64MM) BC--5/8 (67MM) BC--3/4 (70MM) BC--7/8 (73MM) BC-3 (76MM) GB-3-1/4 (83MM) GB-3-1/ (89MM) GB-3-3/4 (95MM) GB-4-1/8 (105MM) GB-4-5/8 (118MM) Heavy Duty Flex-Hones 3 4-1/ are 13-1/ OAL 5 8 are 17-1/ OAL 10 GRIT 180 GRIT 40 GRIT 30 GRIT FLEX-HONE BORE ORDER PRICE ORDER PRICE ORDER PRICE ORDER PRICE MODEL NO. SIZE NO. EACH NO. EACH NO. EACH NO. EACH GBD-3 (76MM) $ $ $ $83.10 GBD-3-1/4 (83MM) GBD-3-1/ (89MM) GBD-3-3/4 (95MM) GBD-4 (101MM) GBD-4-1/4 (108MM) GBD-4-1/ (114MM) GBD-5 (17MM) GBD-5-1/ (140MM) GBD-6 (15MM) GBD-6-1/ (165MM) GBD-7 (178MM) GBD-7-1/ (190MM) GBD-8 (03MM)

3 Brushes 4 z Trulock Crimped Wire Wheel Brushes MAX SAFE WIRE ARBOR TRIM FACE FREE SPEED STD. ITEM PRICE DIA. SIZE HOLE LENGTH WIDTH (RPM) PKG. NO. EACH Narrow Face /-3/8 7/8 1/ 6, $ /-3/8 7/8 1/ 6, /8-1/ 1-7/16 3/4 6, /8-1/ 1-7/16 3/4 6, /8-1/ -1/16 3/4 6, /8-1/ -1/16 1/ 6, /4-1/ 3/4 4, /4-1/ 3/4 4, Medium Face /8 1 6, /8 1 6, /8 1 4, /8 1 4, * 1-1/8 3, ** 1-1/8 3, Wide Face /8 1-1/8 6, /8 1-3/8 4, /8 1-5/8 4, Features plastic snap-out arbor hole adapter Other arbor holes available using metal adapter. Please specify. * 1/ x 1/4 Double keyway and uses metal adapter. Orbitor Bench Grinder Brushes Features plastic snap-out arbor hole adapter. Other arbor hole available on request MAX SAFE WIRE ARBOR TRIM FACE FREE SPEED STD. ITEM PRICE DIA. SIZE HOLE LENGTH WIDTH (RPM) PKG. NO. EACH Narrow Face /8-1/ 1-1/16 5/8 6, $ /8-1/ 1-9/16 3/4 6, Medium Face /8-1/ 1-1/8 7/8 6, /8-1/ 1-5/8 7/8 6, Copper Center Wire Wheels Wire Fill MAX SAFE WIRE ARBOR TRIM FACE FREE SPEED STD. ITEM PRICE DIA. SIZE HOLE LENGTH WIDTH (RPM) PKG. NO. EACH.006 1/ 1/ 3/8 0, $ /-3/8 1/ 3/8 0, /8 15/16 1/ 0, / 1 1/ 0, /-3/8 1 1/ 0, Metal Adapters For Wire Wheel Brushes (Used in pairs) Dualife Knot Type Wire Wheel Brushes Standard Twist MAX SAFE WIRE ARBOR TRIM FACE FREE SPEED STD. ITEM PRICE DIA. SIZE HOLE LENGTH WIDTH (RPM) PKG. NO. EACH /-3/8 7/8 1/ 0, $ /-3/8 7/8 1/ 0, /8-1/ 1-3/8 1/ 9, /8-1/ 1-5/8 5/8 6, /8-1/ 1-5/8 5/8 6, /4* 1-3/4 3/4 4, /4* -3/4 3/4 3, /4* -1/4 5/8 5, /4* 4-1/4 7/8 3, Features plastic snap-out arbor hole adapter * 5/16 x 5/3 Double Keyway Other diameters, arbor hole, or wire sizes available on request. ADAPTER STD. ORDER PRICE ARBOR SIZE PKG. SIZE EACH 1/ 1 Pr $1.77 5/8 1 Pr /4 1 Pr /8 1 Pr Pr /4 1 Pr / 1 Pr Standard Twist Stainless Steel MAX SAFE WIRE ARBOR TRIM FACE FREE SPEED STD. ITEM PRICE DIA. SIZE HOLE LENGTH WIDTH (RPM) PKG. NO. EACH /-3/8 7/8 1/ 0, $ /8-1/ 1-3/8 1/ 9, /8-1/ 1-5/8 5/8 6, Standard Twist- Wide Face (Double Sections) MAX SAFE WIRE ARBOR TRIM FACE FREE SPEED STD. ITEM PRICE DIA. SIZE HOLE LENGTH WIDTH (RPM) PKG. NO. EACH /8 7/8 9, $ /8 1 6, /4 1-1/4 4, /4 1-1/4 3, Other arbor holes available using metal adapter 99

4 Cup Brushes Brushes Knot Type - Single Row Knot Type - Double Row MAX SAFE WIRE ARBOR TRIM FREE SPEED STD. ITEM PRICE DIA. SIZE HOLE LENGTH (RPM) PKG. NO. EACH Knot Type Single Row / /4 9, $ / /4 9, / /4 9, / / 6, / / 6, / / 6, Knot Type Double Row Heavy Duty / /8 6, Crimped Wire Medium & Light Duty Applications / /8 9, / /8 9, / /4 6, / /4 6, Knot Type Single Row Heavy Duty Stainless Steel / /4 9, / /4 9, / /8 6, / /8 6, Crimped Wire Mighty-Mite Brushes for Small Angle Grinders Knot Type Wire Wheel- Stringer Bead Twist 4 MAX SAFE WIRE ARBOR TRIM FACE FREE SPEED STD. ITEM PRICE DIA. SIZE HOLE LENGTH WIDTH (RPM) PKG. NO. EACH /8-11 7/8 3/16 0, $ M 10 x 1.5 7/8 3/16 0, Stainless.00 M 10 x 1.5 7/8 3/16 0, Stainless.00 5/8-11 7/8 3/16 0, Knot Type - Wire Wheel Cable Twist Crimped Wire Cup Brush MAX SAFE WIRE ARBOR TRIM FACE FREE SPEED STD. ITEM PRICE DIA. SIZE HOLE LENGTH WIDTH (RPM) PKG. NO. EACH /8-11 7/8 1/4 0, $1.36 MAX SAFE WIRE ARBOR TRIM FREE SPEED STD. ITEM PRICE DIA. SIZE HOLE LENGTH (RPM) PKG. NO. EACH M10 x 1.5 7/8 14, $ /8-11 7/8 14, Knot Type - Cup Brush Single Row MAX SAFE WIRE ARBOR TRIM FREE SPEED STD. ITEM PRICE DIA. SIZE HOLE LENGTH (RPM) PKG. NO. EACH -3/4.00 M10 x 1.5 7/8 14, $ /4.00 1/-13 7/8 14, /4.00 5/8-11 7/8 14,

5 Brushes Nylox Filament Brushes Nylox Wheels Crimped Filament Crimped Filament Disc Silicon Carbide Composite Hub FILAMENT THICKNESS MAX SAFE ARBOR DIAM. AND TRIM FACE THROUGH FREE SPEED STD. ITEM PRICE DIA. HOLE GRIT SIZE LENGTH WIDTH ARBOR (RPM) PKG. NO. EACH 6.00/30 1-1/ /16 5, $ / / /16 5, /10 1-1/ /16 5, /80 1-1/ /16 5, /30-1/4 1 3/4 5, /180-1/4 1 3/4 5, /10-1/4 1 3/4 5, /80-1/4 1 3/4 5, / /16 4, / /16 4, / /16 4, / /16 4, Other arbor holes available using metal adapter. Please specify. Nylox Cup Brushes FILAMENT THICKNESS MAX SAFE ARBOR DIAM. AND TRIM THROUGH FREE SPEED STD. ITEM PRICE DIA. HOLE GRIT SIZE LENGTH ARBOR (RPM) PKG. NO. EACH -3/4 1/4 Stem.0/30 1-1/4 1-1/16 6, $34.0-3/4 1/4 Stem.035/ /4 1-1/16 6, /4 1/4 Stem.040/10 1-1/4 1-1/16 6, / 5/ / / 3/4 1, / 5/ /10 1-1/ 3/4 8, / /10 1-1/4 3/4 8, / /10 1-1/4 1-1/16 6, / /80 1-1/4 1-1/16 6, DIAMETER FILAMENT ARBOR TRIM MAX. ITEM PRICE INCHES DIA./GRIT HOLE LEMGTH RPM NO. EACH 4.0/30 7/8 1-1/, $ /180 7/8 1-1/, /10 7/8 1-1/, /80 7/8 1-1/, /180 7/8 1-1/, /10 7/8 1-1/, /80 7/8 1-1/, /180 7/8 1-1/, /10 7/8 1-1/, /80 7/8 1-1/, Rectangular Filament Disc (.045 x.090) Silicon Carbide Composite Hub DIAMETER ARBOR GRIT TRIM MAX. ITEM PRICE INCHES HOLE SIZE LEMGTH RPM NO. EACH 4 7/ /, $ / /, / /, / /, / /, / /, / /, Nylox Tube Brushes FILAMENT DIA. AND BRUSH STEM OVERALL STD. ITEM PRICE DIA. GRIT SIZE LENGTH DIA. LENGTH PKG. NO. EACH 1/4.00/30 1-1/ 1/ $8.66 3/8.035/ / 1/ /.040/10 5/ /8.00/30 7/ /4.035/180-1/ 7/3 5-1/ /8.040/10-1/ 1/4 5-1/ /10-1/ 1/4 5-1/ /8.00/30-1/ 1/4 5-1/ /4.035/180-1/ 1/4 5-1/ /.040/10-1/ 1/4 5-1/ Nylon Disc Brush Drive Arbors Mounts Weiler disc brushes to any type of milling machine or CNC machine ITEM PRICE DESCRIPTION NO. EACH For 4 diameter disc brushes $00.01 with 1-1/4 diameter bolt circle For 6 diameter disc brushes with 3 diameter bolt circle For 8 diameter disc brushes with 3 diameter bolt circle Standard 3/4 diameter shaft, long. Standard 7/8 diameter shouldered spindle. 4

6 Brushes 4 Power and Hand Tube Brushes End Brushes Single Stem, Single Spiral STS Type - Eye Handle WIRE BRUSH STEM OVERALL STD. ITEM PRICE DIA. SIZE LENGTH DIAM. LENGTH PKG. NO. EACH 3/ / 3/ $4.85 3/ / 3/ / / 3/ / / 3/ / / / / /.004 1/ /.006 1/ Solid End Knot Type Crimped Wire Cup Single Stem, Round SM Type - Stainless Steel Stem Steel Wire 1/ /8 3-1/ $4.6 3/ /8 3-1/ / /16 3-1/ / /16 3-1/ / /16 3-1/ / /16 3-1/ / /3 3-1/ / /3 3-1/ / /3 3-1/ /4 3-1/ / /4 3-1/ / /4 3-1/ Stainless Steel Wire 1/ /8 3-1/ / /8 3-1/ / /16 3-1/ / /16 3-1/ / /3 3-1/ / /3 3-1/ /4 3-1/ Single Stem, Double Spiral DS Type MAX SAFE STAINLESS WIRE TRIM FREE SPEED STD. ITEM PRICE ITEM PRICE DIA. SIZE LENGTH (RPM) PKG. NO. EACH NO. EACH Conflex Narrow Face Crimped Wire Wheel Solid End 1/.006 7/8 5, $ $9.90 1/ /8 5, /.014 7/8 5, /.00 7/8 5, / /8, / /8, / /8, /4.00 7/8, /8, /8, /8, /8, Knot Type 3/4.00 7/8 0, / /8 0, /8.00 7/8 0, Crimped Wire Cup Brushes 1-3/ /4 13, / /4 13, / /8 6, Single Stem, Double Spiral DS Type 1/.006 5/ $10.0 5/ / / / 1/4 5-1/ / / 1/4 5-1/ / 1/4 5-1/ / / 1/4 5-1/ MAX SAFE STAINLESS WIRE TRIM FREE SPEED STD. ITEM PRICE ITEM PRICE DIA. SIZE LENGTH (RPM) PKG. NO. EACH NO. EACH.006 1/ 0, $ / 0, /.006 3/4 0, $19.0 1/.014 3/4 0, , , ,

7 Maintenance Brushes Hand Wire Scratch Brushes Curved Handle FILL NUMBER BLOCK BRUSH TRIM STD. ITEM PRICE MATERIAL OF ROWS SIZE PART LENGTH PKG. NO. EACH.01 STEEL 3 x x 1/ x $.0.01 SS 3 x x 1/ x STEEL 3 x x 7/8 5-1/ 1-3/ SS 4 x x 1-1/ STEEL 4 x x 1-1/ / With Scraper Block Type FILL NUMBER BLOCK TRIM STD. ITEM PRICE MATERIAL OF ROWS SIZE LENGTH PKG. NO. EACH.01 STEEL 6 x /4 x -1/4 1-5/ $5.88 Scraper Type FILL NUMBER BLOCK BRUSH TRIM STD. ITEM PRICE MATERIAL OF ROWS SIZE PART LENGTH PKG. NO. EACH.01 STEEL 4 x x 1-1/ 5 1-5/ $ Shoe Handle FILL NUMBER BLOCK BRUSH TRIM STD. ITEM PRICE MATERIAL OF ROWS SIZE PART LENGTH PKG. NO. EACH.01 STEEL 4 x x $ SS 4 x x STEEL 4 x x 1-1/ / With Scraper Chip and Oil Brushes Natural White Bristle Wood Handle BRISTLE STD. ITEM PRICE WIDTH THICKNESS LENGTH PKG. NO. EACH 1/ 5/16 1-3/ $ /16 1-3/ / 5/16 1-3/ /16 1-3/ / 3/8 1-3/ /8 1-3/ / Counter Dusters Small FILL NUMBER BLOCK BRUSH TRIM STD. ITEM PRICE HANDLE MATERIAL OF ROWS SIZE PART LENGTH PKG. NO. EACH Plastic.006 SS 3 x 7 7-1/ x 1/ 1-3/8 1/ $.8 Wood.006 SS 3 x 7 7-1/ x 1/ 1-3/8 1/ Wood.006 Brass 3 x 7 7-1/ x 1/ 1-3/8 1/ FILL BRUSH TRIM STD. ITEM PRICE MATERIAL LENGTH LENGTH PKG. NO. EACH Black Tampico 8-1/ $6.7 Black Synthetic 8-1/ Black Horsehair 8-1/ Grey Tampico 8-1/ Black Horsehair Tin Handle Acid Brushes TRIM OVERALL STD. ITEM PRICE Parts Cleaning Brush WIDTH LENGTH LENGTH PKG. NO. EACH 3/8 3/4 5-3/ $0.5 1/ 3/4 5-3/ FILL BRISTLE STD. ITEM PRICE MATERIAL DIA. LENGTH PKG. NO. EACH Nylon 1-1/ $.68 Tampico 1-3/ Floor Brushes Fine Sweeping TRIM STD. ITEM PRICE DESCRIPTION LENGTH PKG. NO. EACH Fine Sweeping 18 Block Black Tampico -7/ $ Block Black Synthetic -7/ Medium Sweeping 18 Block Synthetic Block Synthetic Medium Sweeping TRIM STD. ITEM PRICE DESCRIPTION LENGTH PKG. NO. EACH Coarse Sweeping 18 Block Synthetic 3-1/ $ Block Synthetic 3-1/ Garage Sweeping 18 Block Palmyra Block Palmyra Coarse Sweeping Handles Threaded End - 5 Overall Length Order No Price Each...$4.83

8 Surface Grinding Wheels Vitrified Bonded for Rich Stock Removal and Excellent Rigidity for Precision Grinding WA White Aluminum Oxide AZ Premium Blue Aluminum Oxide CG Green Silicon Carbide AS3 Synthetic Ceramic Blend Friable grain for light grinding of Suitable for HSS grinding on materials General purpose grinding on Features a blend of synthetic all steels, particularly tool & 55RC and above. Exceptionally cool, tungsten carbide and non- ceramic grain with PA and die steels. fast cutting. ferrous metals. WA grains for optimum fracturing. Provides a continuous, sharp cutting action. 3A Premium Aluminum Oxide Outstanding firm holding wheels with free cutting grain, ideal for medium to heavy stock removal. Excellent versatility and performance on a wide range of materials. RA Ruby Aluminum Oxide For fast stock removal on tool steels below 55RC and for high chromium steels. This grain is harder than the PA and AZ. Buy Ctn Qty Deduct 0% 6 x 1/ x 1-1/4 No Recess WHITE ALUMINUM ALUMINUM OXIDE SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH QTY NO. EACH 60K $ x 1/4 x 1-1/4 No Recess WHITE ALUMINUM ALUMINUM OXIDE SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH QTY NO. EACH 46I $ $ I $ J K $.0 80I J K I K K K Limited Quantites 7 x 1/ x 1-1/4 No Recess WHITE ALUMINUM ALUMINUM OXIDE GRAY ALUMINUM OXIDE SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) (TYPE 3A) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH NO. EACH QTY NO. EACH 46G $ H $ $ $ I J K H I $ J K L H I K I K K K

9 Surface Grinding Wheels Ruby Red Aluminum Oxide 7 x 1/ x 1 /4 No Recess 7 x 1/ x 1-1/4 Porous Bond No Recess Buy Ctn Qty Deduct 0% TYPE RA GRIT/ MAX CTN ORDER PRICE HARDNESS RPM QTY NO. EACH 46H $ J/K J/K WHITE ALUMINUM ALUMINUM OXIDE RUBY ALUMINUM OXIDE OXIDE (TYPE WA) (TYPE AZ) (TYPE RA) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH 46H $ $ G $0.5 60H Limited Quantites 7 x 3/4 x 1-1/4 Recessed One Side 3 x 1/4 WHITE ALUMINUM ALUMINUM OXIDE SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH QTY NO. EACH 46H $ $ I J K H I $4.5 60J K I I Limited Quantites 7 x 1 x 1-1/4 Recessed One Side 3 x 1/ WHITE ALUMINUM ALUMINUM OXIDE SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH QTY NO. EACH 46H $ $ I J K H I $ J K I I Limited Quantites 8 x 1/4 x 1-1/4 No Recess WHITE ALUMINUM ALUMINUM OXIDE SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH QTY NO. EACH 46H $ K K I $ J Limited Quantites 305

10 Surface Grinding Wheels 8 x 1/ x 1-1/4 No Recess Buy Ctn Qty Deduct 0% 8 x 3/4 x 1-1/4 Recessed One Side 3 x 1/4 WHITE ALUMINUM ALUMINUM OXIDE SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH QTY NO. EACH 46H $ $ J K I $ J K I x 1 x 1-1/4 Recessed One Side 3 x 1/ Limited Quantites WHITE ALUMINUM ALUMINUM OXIDE SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH QTY NO. EACH 46H $ $ I J K I $ J K I x 1/ x 3 No Recess WHITE ALUMINUM ALUMINUM OXIDE SILICON CARBIDE GREY ALUMINUM OXIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) (TYPE CG) (TYPE 3A) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH NO. EACH QTY NO. EACH 46H $ $ I $.0 46J K $ H I $ J K I K I x 1/ x 1 /4 Porous Bond - No Recess RUBY ALUMINUM OXIDE (TYPE RA) GRIT/ MAX CTN ORDER PRICE HARDNESS RPM QTY NO. EACH 46H $ H Limited Quantites WHITE ALUMINUM ALUMINUM OXIDE SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH QTY NO. EACH 46J $ H J $ K Limited Quantites

11 Surface Grinding Wheels 10 x 3/4 x 3 No Recess Buy Ctn Qty Deduct 0% WHITE ALUMINUM ALUMINUM OXIDE SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH QTY NO. EACH 46I $ H I $ K Limited Quantites 10 x 1 x 3 No Recess WHITE ALUMINUM ALUMINUM OXIDE SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH QTY NO. EACH 46H $ I $ J K $ H I J K Limited Quantites 1 x 3/4 x 3 No Recess WHITE ALUMINUM ALUMINUM OXIDE SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH QTY NO. EACH 46H $ I $ K Limited Quantites 1 x 1 x 3 No Recess WHITE ALUMINUM ALUMINUM OXIDE SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH QTY NO. EACH 46H $ $ $ J K I K Limited Quantites 307

12 Surface Grinding Wheels 1 x 1 x 5 No Recess Buy Ctn Qty Deduct 0% WHITE ALUMINUM ALUMINUM OXIDE SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH QTY NO. EACH 46H $ $ $ I J K J K x 1-1/ x 3 Recessed One Side 7-1/ x 1/ Limited Quantites WHITE ALUMINUM ALUMINUM OXIDE SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH QTY NO. EACH 46H $ I J I x 1-1/ x 5 Recessed One Side 7-1/ x 1/ WHITE ALUMINUM ALUMINUM OXIDE SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH QTY NO. EACH 46H $ $ I J K I J K x 1-1/ x 5 Porous Bond Recessed One Side 7-1/ x 1/ RUBY ALUMINUM OXIDE (TYPE RA) GRIT/ MAX CTN ORDER PRICE HARDNESS RPM QTY NO. EACH 46H $ x x 5 Recessed Two Sides 7-1/ x 1/ WHITE ALUMINUM ALUMINUM OXIDE SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH QTY NO. EACH 46H $ I $ J H

13 Surface Grinding Wheels 14 x 1 x 5 No Recess WHITE ALUMINUM ALUMINUM OXIDE GREY ALUMINUM OXIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) (TYPE 3A) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH QTY NO. EACH 46H $ $ I $ J $ I K Buy Ctn Qty Deduct 0% 14 x 1-1/ x 5 No Recess GRAY WHITE ALUMINUM ALUMINUM OXIDE ALUMINUM OXIDE OXIDE (TYPE WA) (TYPE AZ) (TYPE 3A) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH 46H $ $ $ I J K H J x 1-1/ x 5 Recessed One Side 8 x 1/ WHITE ALUMINUM ALUMINUM OXIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH 46H $ $ I J H I $ J x 1-1/ x 5 Porous Bond No Recess RUBY ALUMINUM OXIDE (TYPE RA) GRIT/ MAX CTN ORDER PRICE HARDNESS RPM QTY NO. EACH 46H $ x 1-1/ x 5 - Porous Bond Recessed One Side 8 x 1/ RUBY ALUMINUM OXIDE (TYPE RA) GRIT/ MAX CTN ORDER PRICE HARDNESS RPM QTY NO. EACH 46H $ x x 5 Recessed One Side 8 x 1 WHITE ALUMINUM ALUMINUM OXIDE SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE AZ) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH NO. EACH QTY NO. EACH 46H $ $ I J K I J K *Carton Qty. deduction not applicable 14 x x 5 - Porous Bond Recessed One Side 8 x 1 RUBY ALUMINUM OXIDE (TYPE RA) GRIT/ MAX CTN ORDER PRICE HARDNESS RPM QTY NO. EACH 46H $ *Carton Qty. deduction not applicable 309

14 Tool & Cutter Grinding Wheels Vitrified Bonded Assortment of the Standard Shapes Most Commonly Used in Tool and Cutter Applications. WA White Aluminum Oxide CG Green Silicon Carbide AS3 Synthetic Ceramic Blend Friable grain for light grinding of all Used for non-ferrous metals Features a blend of synthetic ceramic grain with steels, particularly tool & die steels. such as cemented carbides. PA and WA grains for optimum fracturing. Provides a continuous, sharp cutting action. 4/3 x 1-1/ x 1-1/4 Flaring Cup Wheel WHITE ALUMINUM SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH QTY NO. EACH 46I $ $ J K H I J K K Limited Quantites Buy Ctn Qty Deduct 0% 5/3-3/4 x 1-3/4 x 1-1/4 Flaring Cup Wheel WHITE ALUMINUM SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH QTY NO. EACH 46H $ I $ J K I $ J K K x 1-1/ x 1-1/4 Straight Cup Wheel WHITE ALUMINUM SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH QTY NO. EACH 46J $.85 46K I $ J K K Limited Quantites 310

15 Tool & Cutter Grinding Wheels Vitrified Bonded Assortment of the Standard Shapes Most Commonly Used in Tool and Cutter Applications. Buy Ctn Qty Deduct 0% WA White Aluminum Oxide CG Green Silicon Carbide AS3 Synthetic Ceramic Blend Friable grain for light grinding of all Used for non-ferrous metals Features a blend of synthetic ceramic grain with steels, particularly tool & die steels. such as cemented carbides. PA and WA grains for optimum fracturing. Provides a continuous, sharp cutting action. 6 x 1/ x 1-1/4 Dish Wheel WHITE ALUMINUM SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH QTY NO. EACH 46K $ J K x 1 x 4 Plate Mounted Wheels WHITE ALUMINUM SILICON CARBIDE SYNTHETIC CERAMIC OXIDE (TYPE WA) (TYPE CG) GRAIN (TYPE AS3) GRIT/ MAX CTN ORDER PRICE ORDER PRICE CTN ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH QTY NO. EACH 46K $ I $ I I I Vitrified Bond Silicon Carbide Dressing Sticks For cleaning, dressing and reshaping vitrified bond grinding wheels. ORDER PRICE SIZE GRADE NO. EACH 6 x 1 x 1 4S $.1 8 x 1 x 1 4S

16 Bench and Pedestal Wheels Vitrified Bonded Straight Wheels Used for Off-hand Tool Sharpening and General Purpose Bench Grinding Applications. Buy Ctn Qty Deduct 0% A Dark Aluminum Oxide The most common of all grains. This grain is used for heavy duty general purpose work. CG Green Silicon Carbide Used for non-ferrous metals such as cemented carbides. 6 x 1/ x H (Telescopic Bushing 3/4, 5/8, 1/ ) 6 x 3/4 x H (Telescopic Bushing 3/4, 5/8, 1/ ) DARK ALUMINUM SILICON CARBIDE OXIDE (TYPE A) (TYPE CG) GRIT/ MAX CTN ORDER PRICE ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH 4Q $ O M I $ M I M I Limited Quantites 6 x 1 x H (Telescopic Bushing 3/4, 5/8, 1/ ) DARK ALUMINUM SILICON CARBIDE OXIDE (TYPE A) (TYPE CG) GRIT/ MAX CTN ORDER PRICE ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH 4Q $ O M I $ M I M I DARK ALUMINUM SILICON CARBIDE OXIDE (TYPE A) (TYPE CG) GRIT/ MAX CTN ORDER PRICE ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH 4Q $ O M I $ M I M I DARK ALUMINUM SILICON CARBIDE OXIDE (TYPE A) (TYPE CG) GRIT/ MAX CTN ORDER PRICE ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH 4Q $ O I $ M I I Limited Quantites 7 x 1 x H (Telescopic Bushing 3/4, 5/8, 1/ ) DARK ALUMINUM SILICON CARBIDE OXIDE (TYPE A) (TYPE CG) GRIT/ MAX CTN ORDER PRICE ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH 4Q $ O M I $ M I M I x 1 x 1-1/4 DARK ALUMINUM SILICON CARBIDE OXIDE (TYPE A) (TYPE CG) GRIT/ MAX CTN ORDER PRICE ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH 4Q $ O M I $ M I M I x 1 x H (Telescopic Bushing 3/4, 5/8, 1/ ) DARK ALUMINUM SILICON CARBIDE OXIDE (TYPE A) (TYPE CG) GRIT/ MAX CTN ORDER PRICE ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH 4Q $ O M I $ M I M I x 1-1/ x 1-1/4 DARK ALUMINUM SILICON CARBIDE OXIDE (TYPE A) (TYPE CG) GRIT/ MAX CTN ORDER PRICE ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH 4Q $ O M I $ M I M I

17 Bench and Pedestal Wheels Vitrified Bonded Straight Wheels Used for Off-hand Tool Sharpening and General Purpose Bench Grinding Applications Buy Ctn Qty Deduct 0% except 16 and 18 Diameters 1 x 1 x 1-1/4 DARK ALUMINUM SILICON CARBIDE OXIDE (TYPE WA) (TYPE CG) GRIT/ MAX CTN ORDER PRICE ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH 4Q $ M I $ M x 1-1/ x 1-1/4 DARK ALUMINUM SILICON CARBIDE OXIDE (TYPE WA) (TYPE CG) GRIT/ MAX CTN ORDER PRICE ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH 4Q $ O M I $ M I x x 1-1/ DARK ALUMINUM SILICON CARBIDE OXIDE (TYPE WA) (TYPE CG) GRIT/ MAX CTN ORDER PRICE ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH 4Q $ O M I $ M I M I x x 1-1/4 To 1-1/ DARK ALUMINUM SILICON CARBIDE OXIDE (TYPE WA) (TYPE CG) GRIT/ MAX CTN ORDER PRICE ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH 4Q $ O M I $ M I M x x 1-1/ DARK ALUMINUM SILICON CARBIDE OXIDE (TYPE WA) (TYPE CG) GRIT/ MAX CTN ORDER PRICE ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH 4Q $ O Carton quantity discount does not apply 18 x 3 x 1-1/ DARK ALUMINUM SILICON CARBIDE OXIDE (TYPE WA) (TYPE CG) GRIT/ MAX CTN ORDER PRICE ORDER PRICE HARDNESS RPM QTY NO. EACH NO. EACH 4Q $ O M Carton quantity discount does not apply 313

18 Mattison-Thompson Type Large 0 Inch Diameter Surface Grinding Wheels For Horizontal Spindle, Rotary and Reciprocating Tables. 83A Friable Full Premium Aluminum Oxide Friable grain for fast stock removal. The free cutting open structure is ideal for all tool steels. V-18 Normal structures. V-18P Induced open porosity. 73C Silicon Carbide For non-ferrous metals, gray iron. 91A Semi-Friable, Mixed Aluminum Oxide Provides a continuous, sharp cutting action. A mixture of WA and A abrasives. Recommended for general purpose work and light stock removal. AS3 Synthetic Ceramic Blend Features a blend of synthetic ceramic grain with PA and WA grains for optimum fracturing. 1 Buy Ctn Qty (Where shown) Deduct 10% 0 x 1 x 8 GRIT/ GRAIN BOND RPM NO. EACH 83A 46H8 V * $ A 60J8 V * *CARTON QTY.= 3 0 x 1 x 10 GRIT/ GRAIN BOND RPM NO. EACH 83A 36J8 V * $ 17.5 *CARTON QTY.= 3 0 x 1-1/ x 8 Recessed 1/S 11-1/ x 1/ GRIT/ GRAIN BOND RPM NO. EACH 83A 46H8 V * $ A 60J8 V * *CARTON QTY.= 0 x 1-1/ x 10 GRIT/ GRAIN BOND RPM NO. EACH 83A 46H8 V * $ *CARTON QTY.= 0 x x 8 Recessed /S 11-1/ x 1/ GRIT/ GRAIN BOND RPM NO. EACH 83A 46H8 V * $ A 60J8 V * A 36J/K V-18P * A 46G+ V-18P * A 46I8 V * 0.00 *CARTON QTY.= 0 x x 10 GRIT/ GRAIN BOND RPM NO. EACH 83A 36J8 V * $ A 46H8 V * A 60J8 V * A 46G+ V-18P * x 3 x 8 Recessed /S 11-1/ x 1/ GRIT/ GRAIN BOND RPM NO. EACH 83A 46H8 V * $ A 36J/K V-18P * A 46D V-18P * A 46G+ V-18P * A 46I8 V * C 46I8 V-X * x 3 x 10 Recessed 1/S 1-1/ x 5/8 O/S 1-1/ x 1 GRIT/ GRAIN BOND RPM NO. EACH 83A 46H8 V * $ A 60J8 V * A 36J/K V-18P * A 46D V-18P * A 46G+ V-18P * A 46I8 V * C 46I8 V-X * AS3 46H V-CER * *CARTON QTY.= 0 x 4 x 8 Recessed /S 11-1/ x 1/ GRIT/ GRAIN BOND RPM NO. EACH 83A 46H8 V $ A 36J/K V-18P A 46G+ V-18P *CARTON QTY.= *CARTON QTY.= 0 x 4 x 10 Recessed 1/S 1-1/ x 7/8 O/S 1-1/ x 1-1/4 GRIT/ GRAIN BOND RPM NO. EACH 83A 46H8 V $ A 36J/K V-18P A 46G+ V-18P A 46I8 V x 6 x 10 Recessed 1/S 1-1/ x 1 O/S 1-1/ x GRIT/ GRAIN BOND RPM NO. EACH 83A 46H8 V $ A 36J/K V-18P A 46G+ V-18P A 46I8 V C 46I8 V-X AS3 46H V-CER x 6 x 1 Recessed /S 14-1/4 x 1 GRIT/ GRAIN BOND RPM NO. EACH 83A 46H8 V $ A 36J/K V-18P A 46G+ V-18P A 46I8 V x 8 x 1 Recessed /S 14-1/ x 1 GRIT/ GRAIN BOND RPM NO. EACH 83A 46H8 V $506.10

19 Centerless & Cylindrical Wheels 1 Through 4 Diameter Centerless & Cylindrical Wheels each have accurate toleranced inside linings to protect spindles. Manufactured with varying hardness to assure consistent grindability throughout. 94A Aluminum Oxide Very durable self-dressing grain. 7C Silicon Carbide For non-ferrous metals. PA Pink Aluminum Oxide Excellent for pre-hardened carbon steels. 1 Buy Ctn Qty (Where shown) Deduct 10% 1 x 4 x 5 No Recess 94A 60-L $ x 1 x 5 No Recess 94A 54-K * $ A 60-L * A 80-M * *CARTON QTY.= 14 x 1-1/4 x 5 No Recess 94A 54-K * $ A 60-L * *CARTON QTY.= 14 x 1-1/ x 5 Rec 1/S 8 X 1/ 94A 54-K * $ A 60-L * A 80-M * x 1-1/ x 5 No Recess 94A 60-L $ A 80-M x x 5 No Recess *CARTON QTY.= 14 x x 5 Rec 1/S 8 X 1 94A 54-K $ A 60-L A 80-M x 1 x 5 No Recess 94A 60-L $ A 80-M A 60-L $ A 80-M x 1 x 8 No Recess 94A 54-K $ A 60-L A 80-M x 1-1/ x 8 No Recess 94A 54-K $9.5 94A 60-L A 80-M x x 8 No Recess 94A 54-K $ A 60-L x 4 x 10 No Recess 94A 60-L $ A 80-L x 1 x 1 No Recess 94A 60-K * $ A 60-L * A 60-M * A 80-O * *CARTON QTY.= 3 0 x x 1 No Recess 94A 60-K * $ A 60-L * A 60-M * A 80-M * A 80-O * A 80-P * HARD SIDE 94A 80-N/10-S * *CARTON QTY.= 0 x -1/ x 1 No Recess HARD SIDE 94A 80-N/10-S * $.15 0 x 3 x 1 No Recess 94A 60-K * $ A 60-L * *CARTON QTY.= *CARTON QTY.= 0 x 4 x 1 No Recess 94A 60-K $ A 60-L A 60-M A 80-M A 80-P HARD SIDE 94A 80-N/10-S x 6 x 1 No Recess 7C 60-L $ A 60-K A 60-L A 60-M A 80-J A 80-L A 80-M A 80-O A 80-P HARD SIDE 94A 80-N/10-S x 8 x 1 No Recess 7C 60-L $ A 54-J A 60-K A 60-L A 60-M A 80-J A 80-L A 80-M A 80-O HARD SIDE 94A 80-N/10-S x 10 x 1 No Recess 94A 60-L $63.10

20 Centerless & Cylindrical Wheels 4 x 1-1/ x 1 No Recess 94A 60-K * $7.35 *CARTON QTY.= 1 Buy Ctn Qty (Where shown) Deduct 10% 4 x x 1 No Recess 94A 60-K * $ A 60-L * A 60-M * A 80-O * 7.35 HARD SIDE 94A 80-N6/10-S * *CARTON QTY.= 4 x -1/ x 1 No Recess HARD SIDE 94A 80-N/10-S * $ *CARTON QTY.= 4 x 3 x 1 No Recess 94A 60-K $99.80 HARD SIDE 94A 80-N/10-S x 3 x 1 Rec 1/S 14-1/ x 1 94A 60-K $ x 4 x 1 No Recess 94A 60-K $ A 60-L A 80-M HARD SIDE 94A 80-N/10-S x 6 x 1 No Recess 94A 60-K $ A 60-L A 80-J A 80-M HARD SIDE 94A 80-N/10-S x 8 x 1 No Recess 7C 60-L $ A 60-K A 60-L A 60-M A 80-J A 80-L x 10 x 1 No Recess 94A 60-K $ A 60-L A 60-M x 0 x 1 No Recess 94A 60-K $ A 60-L A 60-M Feed/Regulating Wheels Aluminum Oxide Rubber Bonded For All Centerless Grinding Machines Isostatic process assures perfect gripping with standard A-80-R-RX grade 1 RPM NO. EACH 8 x 4 x $18.75 R 1/S 4-1/4 x 1/ O/S 4-1/4 x 1-1/ 9 x x x 4 x R /S 5-1/ x 5/8 10 x 6 x 5-1/ R /S 6-1/ x 1/ 1 x 1 x x x x -1/ x x 3 x x 4 x R /S 7-1/ x 1/ RPM NO. EACH 1 x 6 x $ R 1/S 7-1/ x 1/ O/S 7-1/ x 1-1/ 1 x 6 x R /S 7-1/ x 1-1/ 1 x 8 x R 1/S 7-1/ x 1-1/ 1 x 8 x R 1/S 7-1/ x 1-1/ O/S 7-1/ x -1/ 1 x 10 x R 1/S 8 x 1-1/ O/S 8 x RPM NO. EACH 14 x 8 x $595.5 R 1/S 8 x 1-1/ O/S 8 x 14 x 8 x R 1/S 8 x 1-1/ O/S 8 x -1/ 14 x 0 x R /S 8 x 1-1/ 14 x 0 x R /S 8-1/ x 1-1/ 316

21 Mounted Points Group A Special Shapes 3 1/4 Shank SHAPE SIZE ORDER PRICE NO. DIAM. LGTH. NO. EACH A1 3/4-1/ $.45 A 1 1-1/ A3 1-3/ A4 1-1/4 1-1/ A5 3/4 1-1/ A6 3/4 1-1/ A11 7/ A1 11/16 1-1/ A13 1-1/8 1-1/ SHAPE SIZE ORDER PRICE NO. DIAM. LGTH. NO. EACH A14 11/16 7/ $1.05 A15 1/4 1-1/ A A 3/4 5/ A3 3/ A4 1/4 3/ A A6 5/8 5/ A31 1-3/ SHAPE SIZE ORDER PRICE NO. DIAM. LGTH. NO. EACH A3 1 5/ $1.05 A33 1 1/ A34 1-1/ 3/ A35 1 3/ A36 1-5/8 3/ A37 1-1/4 1/ A A39 3/4 3/ A40 3/4 3/ Group W Plain Shapes 1/8 X 1-1/ Shank SHAPE SIZE ORDER PRICE NO. DIAM. LGTH. NO. EACH W141 3/3 5/ $0.70 W14 3/3 1/ W143 1/8 1/ W144 1/8 1/ W145 1/8 3/ W146 1/8 1/ W149 5/3 1/ W150 3/16 1/ W151 3/16 1/ W15 3/16 1/ W153 3/16 3/ W154 3/16 1/ W155 13/64 1/ W157 1/4 1/ W158 1/4 1/ W159 1/4 3/ W160 1/4 1/ W161 1/4 5/ W16 1/4 3/ W163 1/4 1/ W164 1/4 3/ W165 5/16 1/ W166 5/16 1/ W167 5/16 1/ W168 5/16 5/ W169 5/16 3/ W170 5/16 1/ W171 5/16 3/ W17 3/8 1/ W173 3/8 1/ W174 3/8 1/ Limited Quantities SHAPE SIZE ORDER PRICE NO. DIAM. LGTH. NO. EACH W175 3/8 3/ $0.75 W176 3/8 1/ W177 3/8 3/ W178 3/ W179 3/8 1-1/ W181 1/ 1/ W18 1/ 1/ W183 1/ 1/ W184 1/ 3/ W185 1/ 1/ W186 1/ 3/ W187 1/ W190 5/8 1/ W191 5/8 1/ W19 5/8 1/ W193 5/8 3/ W194 5/8 1/ W195 5/8 3/ W199 3/4 1/ W00 3/4 1/ W01 3/4 1/ W0 3/4 3/ W03 3/4 1/ W04 3/4 3/ W10 7/8 1/ W11 7/8 1/ W1 7/8 1/ W13 7/8 3/ W14 15/16 1/ W15 1 1/ W16 1 1/ /4 X 1-1/ Shank SHAPE SIZE ORDER PRICE NO. DIAM. LGTH. NO. EACH W178 3/ $0.85 W187 1/ W188 1/ 1-1/ W189 1/ W194 5/8 1/ W195 5/8 3/ W196 5/ W197 5/ W198 5/8-1/ W04 3/4 3/ W05 3/ W06 3/4 1-1/ W07 3/4 1-1/ W08 3/ W09 3/4-1/ W13 7/8 3/ W17 1 3/ W18 1 1/ W19 1 3/ W W / W W3 1-1/ W W5 1-1/4 1/ W6 1-1/4 3/ W7 1-1/4 1/ W8 1-1/4 3/ W9 1-1/ W30 1-1/4 1-1/ W31 1-1/4 1-1/ W3 1-1/ W35 1-1/ 1/ W36 1-1/ 1/ W37 1-1/ W38 1-1/ 1-1/ W39 1-1/ W W43 1-1/ W W45-1/

22 Mounted Points Group B Special Shapes 3 1/8 Shank SHAPE SIZE ORDER PRICE NO. DIAM. LGTH. NO. EACH B41 5/8 5/ $1.05 B4 1/ 3/ B43 1/4 5/ B44 7/3 5/ B45 3/16 5/ B46 1/8 5/ B47 1/8 5/ B51 7/16 3/ B5 3/8 3/ B53 1/4 5/ B54 1/4 1/ B55 1/8 1/ B61 3/4 5/ B6 3/ SHAPE SIZE ORDER PRICE NO. DIAM. LGTH. NO. EACH B63 1/4 3/ $0.80 B64 1/4 1/ B65 1/8 1/ B70 3/4 1/ B71 5/8 3/ B7 1/ 1/ B73 1/ 1/ B74 7/3 3/ B81 3/4 3/ B8 1/ 1/ B83 3/8 3/ B84 5/16 3/ B90 1/ 1/ B91 1/ 5/ SHAPE SIZE ORDER PRICE NO. DIAM. LGTH. NO. EACH B9 1/4 1/ $0.80 B93 3/16 3/ B94 11/64 3/ B95 1/8 3/ B96 1/8 1/ B97 1/8 3/ B98 3/3 1/ B101 5/8 11/ B10 5/8 1/ B103 5/8 3/ B104 5/16 3/ B105 1/4 1/ B106 1/8 7/ B111 7/16 11/ SHAPE SIZE ORDER PRICE NO. DIAM. LGTH. NO. EACH B11 3/8 1/ $0.90 B113 1/4 1/ B114 7/3 3/ B115 3/3 1/ B11 1/ 1/ B1 3/8 3/ B13 3/16 3/ B14 1/8 1/ B131 1/ 1/ B13 3/8 1/ B133 3/8 3/ B134 5/16 3/ B135 1/4 1/ B136 1/4 5/

23 Diamond Tools For Surface Grinders 6 Inch Overall Length Preferred Grade Made in USA For machine or hand dressing of all wheels. Designed for longer tool life. Economy Grade For general purpose dressing and truing of soft wheels. Coned Radius Dressers RECOMMENDED DIAMOND SIZE WHEEL CARAT WHEEL CARAT FACE WT. FACE WT. 1/4 1/4 1-1/ 1/ 1/ /4 3/4 1/ 3-1/ 1 3/4 4-1/ 1-1/ // 1-1/4 8 and up 3-1/ Economy - Super Value 1/4 Carat - Single Point Convex & Concave Radii Forming Tools MR and FR Series SHANK ORDER SIZE NO. PRICE 3/8 x $4.55 3/8 x /16 x /16 x Designed to form convex and concave radii on small diameter ECONOMY PREFERRED USA grinding wheels. 3/8 x Shanks. SHANK CARAT ORDER ORDER SIZE SIZE NO. PRICE NO. PRICE 3/8 1/ $ $ /8 1/ /8 1/ MR Series Convex Radii FR Series Concave Radii TOOL ORDER TOOL ORDER NO. RADIUS NO. PRICE 3/8 1-1/ MR $1.45 3/ MR / MR-6.50 up /16 1/ /8 3/8 3/ /16 1/ /16 1/ /16 3/ / /16 1-1/ / Phonopoint Diamond Dressing Tools 7/ / 1/ Small cone pointed tools used for precision form dressing. 1/ 1/ / 1/ / 3/ / / 1-1/ / / DEG 75 DEG 90 DEG NO. RADIUS NO. PRICE FR $10.00 FR FR FR FR FR SHANK ORDER ORDER ORDER SIZE NO. PRICE NO. PRICE NO. PRICE 1/8 x $ $ $5.10 3/16 x /4 x 1-1/ A precision shaped tool used for intricate form & radius dressing. 3/8 x -1/ SHANK 7/16 x -1/ SHANK CARAT INCLUDED ORDER ORDER SIZE ANGLE NO. PRICE NO. PRICE 1/4 60 DEG $ $ /4 75 DEG /4 90 DEG /3 60 DEG /3 75 DEG /3 90 DEG / 60 DEG / 75 DEG / 90 DEG Thread Grinding Diamond Tools For use on Jones & Lamson, Ex-Cell-O & similar thread grinding equipment. 60 DEG 90 DEG SIZE MACHINE ORDER NO. PRICE ORDER NO. PRICE 1/4 x 1 J & L $ $9.80 3/8 x 1-5/8 EX-CELL-O Hand Diamond Dressers 7/16 Shank Size - 8 Overall Length Dressers fitted with plastic handles. Ideal for dressing wheels for Surface Grinders, Universal Grinders, etc. CARAT ORDER SIZE NO. PRICE 1/ $6.75 1/ / /

24 Diamond Tools Machine-Use Single Point Diamond Dressers Preferred Grade Diamond Natural & Lapped Chisels LARGE NORTON CINCINNATI Shank: 7/16 x 1-1/ Shank: 7/16 x Head: 5/8 x 5/8 Head: 5/8 x 5/8 CARAT ORDER ORDER SIZE NO. PRICE NO. PRICE 1/ $ $ / / / / Multi Point Cluster Dressing Tools 5/8 Diameter Head, 7 Diamonds For use on radius dressers to form radii, steps, or contours. Tools shown are 1/4 Carat. NATURAL CHISEL EDGE 60 LAPPED CHISEL SHANK ORDER ORDER SIZE NO. PRICE NO. PRICE 3/8 x -1/ $ $ /16 x -1/ Diamond Hones Features: Resin Bond. 100% Concentration. Diamond Length: 1 3/8 width square Overall Length: 4 For straight face and side dressing finishes. CARAT 3/8 SHK 7/16 SHK 1/ SHK SIZE ORDER NO. ORDER NO. ORDER NO. PRICE $ DOUBLE END ORDER GRIT NO. PRICE 100/ $ / / / SINGLE END ORDER GRIT NO. PRICE $ Diamond Wheel Dressers Cutters For Diamond Wheel Dressers T-Handle Diamond Dressers ORDER PRICE SIZE NO. EACH $ ORDER PRICE SIZE NO. EACH $ Used for hand truing and dressing. A broad, flat surface of diamonds in a matrix. 3/8 x 6 Shank. 1/ W x 1-1/ L head. 6-1/ OAL. NO. OF ORDER GRADE DIAMONDS NO. PRICE Standard $80.00 Medium Heavy Duty

25 Diamond Wheels Straight Diamond Wheels Type D1A1 Resin Bond, With Diamonds in Periphery 1/8 Diamond Depth, 150 Grit Diamond Cut-Off Wheels Type D1A1R Resin Bond, 100% Concentration, 1/4 Depth 75 Concentration Economical Grinding 100 Concentration For Surface Grinding. Longer life. 75 CONCENTRATION 100 CONCENTRATION D T H 150 GRIT 150 GRIT DIAM. THICKNESS HOLE DIAM. ORDER NO. PRICE ORDER NO. PRICE 4 1/8 1-1/ $ /4 1-1/ /8 1-1/ /4 1-1/ /8 1-1/ $ /4 1-1/ /8 1-1/ / 1-1/ /8 1-1/ /4 1-1/ /8 1-1/ / 1-1/ /4 1-1/ / 1-1/ Other Grits, Diamond Depths and Arbor Hole Diameters available. Diamond Flaring Cup Wheels Type D11V9 Resin Bond Diamond in the periphery and on the face. Grind with face only. For cutting-off on Carbide. D T H ORDER DIAM. THICKNESS HOLE DIAM. GRIT NO. PRICE / $ / Diamond Face Wheels Type D6AC Resin Bond, Plate Mounted, 150 Grit For Carbide Tool Grinders. Bolt holes countersunk for maximum safety. D T H W X DIAMOND ORDER DIAM. THICKNESS HOLE DIAM. RIM WIDTH DEPTH CONCEN. NO. PRICE 6 3/4 1-1/4 1/ 1/8 75% $ /4 1-1/4 1/ 1/8 100% /4 1-1/4 3/4 1/16 75% /4 1-1/4 3/4 1/16 100% /4 3/4 1/16 75% For use with Tool & Cutter Grinders. D T H X 100 GRIT 150 GRIT DIAMOND ORDER ORDER DIAM. THICKNESS HOLE DIAM. DEPTH CONCEN. NO. NO. PRICE 3-3/4 1-1/ 1-1/4 1/8 75% $ /4 1-1/ 1-1/4 1/8 100% /4 1-1/4 1/8 75% /4 1-1/4 1/8 100% Diamond Flaring Cup Wheels Type D11A Resin Bond. Diamond on the face (rim). 100% Concentration, 150 Grit Diamond Dish Wheels Type D1A Resin Bond. Diamond on the face (rim). 100% Concentration, 150 Grit T H B E K X BACK INSIDE DIAMOND THICKNESS HOLE DIAM. DISH ANGLE THICKNESS FLAT DEPTH 1 1-1/4 30 1/ -5/8 1/8 Used for sharpening Cutting Tools. D W ORDER DIAMETER RIM WIDTH NO. PRICE 6 3/ $ / / For use with Tool & Cutter Grinders. D T H W X DIAMOND ORDER DIAM. THICKNESS HOLE DIAM. RIM WIDTH DEPTH NO. PRICE 3 7/8 1-1/4 3/8 1/ $ /4 1-1/4 1/ 1/ /4 1-1/4 3/8 1/ Inch Diamond Facewheels 5 x 1/4 x 3 Resin Bond, Steel Core, 100% Concentration For Leonard, Cold Grind and similar type grinders. STANDARD 10 GRIT 0 GRIT 30 GRIT SECTION ORDER NO. ORDER NO. ORDER NO. PRICE 1/ $ /

26 Diamond Dressers Optical Radius Angle Dresser Visual Universal Wheel Dresser Adaptable to surface grinders and universal tool grinders. 3X lens magnification through the spindle allows the operator to view the diamond point for radii and angle forming. Easy and accurate. Order No Price:...$ SPECIFICATIONS Center Height.5 Max. Wheel Diameter 8 Max. Convex Radius 1/ Max. Concave Radius 1 Dressing Angle (1 deg incr) Tangential Travel.89 either side Mounting Surface 3.7 x 1.87 Overall Length 8.39 Overall Height 3.94 Radius and Angle Dresser For use on all OD, ID and surface grinding applications. No height gage or set-up aids required. Radius is set on the grinder by measuring over the two pins or by inserting a gage block, for direct reading. Inside or outside radius is determined by using either the left hand or right hand pins. Uses 3/8 shank diamond tool. Order No Price:..$ SPECIFICATIONS Max. Wheel Diameter 1 Center Line Of Tool 3.4 Max. Convex Radii 0 to 1-5/8 Overall Length 16-5/8 Max. Concave Radii 0 to 4 Weight 30 lbs. Tangent Travel Accuracy.0005 Diamond Nib Holder Use on surface grinders. Holds Diamond Dresser at 15 Deg. angle. Base dimension: -1/ x 6 Keyway: 1/ x 7/8 Includes 7/16 x 1/4 Carat dresser. Order No Price: $1.45 Replacement Diamond Dresser Order No Price:$4.55 Hi-Low Adjustable Dresser Use on all grinding machines. Dress O.D. and face of wheels. Adjustable to 7 Height. Includes 3/8 x 3 1/4 Ct. dresser. Order No Price:...$46.00 Replacement Diamond Dresser Order No Price:...$4.55 Accuracy to Gauge block setting Radius and angle can be done perfectly tangent Compact design Wt. 7.7 lbs. Complete with Diamond Dressers, Hex Keys and Wood Case. Precision Punch Former & Radius Wheel Dresser For grinding wheel and punch forming applications. Concave and Convex radii. Hardened tool steel construction. Fitted case. Order No Price:...$67.00 SPECIFICATIONS Max. Dia. Workpiece 1-1/4 V-Block 1-3/16 Adjusting System Rack and Pinion Center Height 3-1/ Indexing Divisions 4 every 15 Degree +/-10 seconds Angle Setting By sine system Roundness Parallelism w/i in 4 Squareness w/i in 4 Graduation 360 Deg. Weight 17.0 lbs. Profile Wheel Dresser Accurate and versatile Radius and Angle Wheel Dresser. *Fast and easy set-ups without elaborate accessories. Only a micrometer and hex key wrench are needed. *Dress angles tangent to a radius in one continuous motion to within *Precise and sharp contours, concave and convex, are consistently obtained at a full 180 Degree range. Order No Price:...$49.00 SPECIFICATIONS Max. Dia. Workpiece 8 Convex Radii 0 to 1-1/ Concave Radii.030 to 1-1/ Center Height 3-1/ Height to center of diamond 6-1/ Dia. of Setting Pins 10mm Overall Height 7 Base 4-3/4 x 3-1/ x 1-1/4 Low-Boy Angle Dresser Use on all grinding machines. Base Angle-Plate heavy, precision ground, square on six sides to.0005 accuracy. Side block pivots on hardened screws. Includes 3/8 x 1/4 Carat dresser. Order No Price:...$76.75 Replacement Diamond Dresser Order No Price:...$4.55 3

27 Diamond & CBN Electro-Plated Mandrels/Jig Grinding Pins Coarse Grit 80/10 Tolerance on Hardened Steel Shanks: / Diamond plated mandrels are used for internal grinding of glass, ceramics, cemented carbides, and other hard and abrasive materials. CBN is ideal for High Speed Steels, such as M, M3, M7 & T16; Die Steels, such as D, D3, HB & A&O; Alloy Steels (harder than 50Rc); Nickel and Cobalt Base Super Alloys; Titanium, and Stainless Steels. STYLE I STYLE II STYLE I A B C D DIAMOND CBN HEAD NECK SHANK ORDER ORDER HEAD LENGTH LENGTH SIZE NO. NO. PRICE.00 1/16 1/8 1/ $ /3 1/4 1/ /3 1/4 1/ /3 1/4 1/ /8 3/8 1/ /8 3/8 1/ /8 3/8 1/ /8 1 1/ /8 3/8 1/ /8 3/8 1/ /8 1 1/ /3 1/ 1/ /3 1 1/ /3 1/ 1/ /3 1 1/ /3 1/ 1/ /3 1 1/ /3 1/ 1/ /3 1 1/ /3 1/ 1/ /3 1 1/ /3 1/ 1/ /3 1 1/ /4 1 1/ /4 1 1/ /4 1 1/ /4 1 1/ /8 1 1/ /4 1 1/ STYLE II A B D DIAMOND CBN HEAD SHANK ORDER ORDER HEAD LENGTH SIZE NO. NO. PRICE.31 1/8 1/ $ /4 1/ /8 1/ /4 1/ /4 1/ /8 1/ /4 1/ / 1/ Diamond Polishing & Lapping Compounds Universal Carrier Oil or Water Soluble Stocked in 5 Gram Disposable Plastic Syringes LIGHT MEDIUM HEAVY DUTY CONCENTRATION CONCENTRATION CONCENTRATION MICRON MICRON ORDER ORDER ORDER FINISH COLOR GRADE RANGE NO. PRICE NO. PRICE NO. PRICE Super Yellow $ $ $16.00 Fine Orange Green Blue Fine Red Brown

28 Type 1 Cut-Off Wheels Tool Room, Die Grinder Tool Room Wheels Aluminum Oxide Resin Bonded Reinforced: For stationary tool room and machine shop use. Fast cutting and clean finishes where precision is necessary. Non- Reinforced: Use on fixed base cut-off machines with the work piece clamped securely and the wheel properly guarded. Fast cutting with clean finish. ZA60-TB-FLEX WHEELS SIZE MAX. STD. ORDER PRICE DIA. x THICK. x ARBOR RPM GRADE CTN. NO. EACH 6 x.060 x 5/ A60-O/P $.71 8 x.060 x 1-1/ A60-O/P NON-REINFORCED 6 x 1/3 x 5/ A60M x 1/16 x 5/ A60M x 1/3 x 1-1/ A60M x 1/16 x 1/ 6548 A60M x 1/8 x 1/ 6548 A60M x 1/8 x 1-1/ A60M x 1/16 x 1-1/4 579 A60M x 1/8 x 1/ 579 A60M x 1/8 x 1-1/4 579 A60M Limited Quantities Type 1 Quickie Cut Reinforced Rt. Angle Grinding Wheels CGW Quickie Cut Reinforced Type 1 Cut-Off wheels are safe for use on Right Angle Grinders, providing excellent results on stainless steel, alloys, and ferrous. Select from B-Flex or Rigid configurations. ZA60-TB-FLEX WHEELS SIZE STD. ORDER PRICE DIA. x THICK. x ARBOR SPEC RPM CTN. NO. EACH 4 x.040 x 5/8 ZA60-TB-FLEX 19, $ / x.035 x 7/8 ZA60-TB-FLEX 13, x.040 x 7/8 ZA60-TB-FLEX 1, x.040 x 3/8 ZA60-TB-FLEX 10, x.040 x 1/ ZA60-TB-FLEX 10, x.040 x 5/8 ZA60-TB-FLEX 10, x.040 x 7/8 ZA60-TB-FLEX 10, x 1/16 x 7/8 ZA60-TB-FLEX 8, ZA36T RIGID WHEELS 4 1/ x.045 x 7/8 ZA36-T-BF 13, x.045 x 7/8 ZA36-T-BF 1, x.045 x 7/8 ZA36-T-BF 10, x 1/16 x 7/8 ZA36-T-BF 8, x 1/16 x 5/8 ZA36-T-BF 6, Buy Std. Ctn. Deduct 10% Fiberglass Reinforced Aluminum Oxide - Resin Bonded For tool room and machine shop use. SIZE MAX. STD. ORDER PRICE DIA. x THICK. x ARBOR RPM GRADE CTN. NO. EACH 6 x.035 x 1/ 1000 A60T $ x.035 x 5/ A60T x.035 x 5/ A60T x 1/16 x 1-1/ A60T x.035 x 1-1/ A60T Limited Quantities Mounting Mandrels For small diameter Type 1 Wheels ARBOR WHEEL ORDER PRICE SIZE THICKNESS NO. EACH 1/4.035 to 1/ $6.71 3/8.035 to 1/ /4, 3/8.035 to 1/ Reusable Flange Adapting Nuts For use with 4-1/ and 5 Diameter Cutoff Wheels on Angle Grinders. Can be used with Type 1 or Type 7 Cutoff wheels,.045 thru 1/8 thickness, 7/8 Arbor Hole. Flange Nuts (Pr) Spanner Wrench 1-3/4 Dia. x 5/8-11 AH For Adapting Nuts Order No Order No Price: $3.19 Price: $ Small Diameter Portable Grinder Fiberglass Reinforced Aluminum Oxide Resin Bonded For use on air or electric straight shaft high speed right angle and die grinders. Designed for fast, burr free cutting and notching. Works especially well on thin walled tube and pipe. USA SIZE MAX. STD. ORDER PRICE STD. ORDER PRICE STD. ORDER PRICE DIA. x THICK. x ARBOR RPM GRADE CTN. NO. EACH GRADE CTN. NO. EACH GRADE CTN. NO. EACH 3 x.035 x 1/ A * $0.90 A60T $0.74 A60T $.03 3 x.035 x 3/ A * 0.90 A60T A60T x 1/16 x 1/ A A36T A46T x 1/16 x 3/ A A36T A46T x 1/8 x 1/ A A36R x 1/8 x 3/ A A36T A36R x.035 x 1/ A * 1.18 A60T x.035 x 3/ A * 1.18 A60T A60T x 1/16 x 1/ A A36T A46T x 1/16 x 3/ A A36T A46T x 1/8 x 1/ A A36R x 1/8 x 3/ A A36T A36R / x.045 x 7/ A60T ** 1.43 A60SST* x.045 x 7/ A36T ** 1.61 A60SST* * 1/3 Thick, ** 1/16 Thick 34 * For Angle Grinder Use Only Limited Quantities

29 Type 1 Cut-Off Wheels Circular Saw Wheels Fiberglass Reinforced Resin Bonded Designed to meet the demands of the professional contractor. A general purpose wheel providing fast cutting action. USA USA METAL, STAINLESS MASONRY, CONCRETE METAL, STAINLESS MASONRY, CONCRETE SIZE MAX. ORDER PRICE ORDER PRICE ORDER PRICE ORDER PRICE DIA. x THICK. x ARBOR RPM GRADE NO. EACH GRADE NO. EACH GRADE NO. EACH GRADE NO. EACH 7 x 3/3 x 5/ A4R $1.74 C4R $1.8 A36TB $ x 1/8 x 5/ C30UB $ x 3/3 x 5/ A36TB x 1/8 x 5/ C30UB Buy Std. Ctn. Deduct 10% CGW Std. Ctns. of 5 Flexovit USA Std. Ctns. of 5 Chopsaw/Mitre Saw Wheels Fiberglass Reinforced Resin Bonded Used on lower horsepower bench top chopsaws and mitre saws, these wheels combine optimum cutting speed and wheel life. USA SIZE MAX. STD. ORDER PRICE STD. ORDER PRICE DIA. x THICK. x ARBOR RPM GRADE CTN. NO. EACH GRADE CTN. NO. EACH 1 x 3/3 x A36P $3.58 A30RB $ x 3/3 x A36P A30RB Masonry Saw Wheels Fiberglass Reinforced Resin Bonded A long life wheel for common brick. light aggregate cement block and fireclay. Limited Quantities USA SIZE MAX. STD. ORDER PRICE STD. ORDER PRICE DIA. x THICK. x ARBOR RPM GRADE CTN. NO. EACH GRADE CTN. NO. EACH 14 x 1/8 x C4R $6.96 C4RB $11.97 High Speed Gas & Electric Saw Wheels Fiberglass Reinforced Resin Bonded Durable, hard working wheels for a variety of job site applications. USA USA METAL, STAINLESS MASONRY, CONCRETE METAL, STAINLESS MASONRY, CONCRETE SIZE MAX. ORDER PRICE ORDER PRICE ORDER PRICE ORDER PRICE DIA. x THICK. x ARBOR RPM GRADE NO. EACH GRADE NO. EACH GRADE NO. EACH GRADE NO. EACH 1 x 1/8 x A4/305B $6.73 C30UB $ x 1/8 x 0MM 6300 A4/305B C30UB x 5/3 x A4R $5.1 C4R $ x 5/3 x 0MM 6300 A4R C4R x 1/8 x A4/305B C30UB x 1/8 x 0MM 500 A4/305B C30UB x 5/3 x A4R C4R x 5/3 x 0MM 500 A4R C4R CGW Std. Ctns.of 10 Flexovit USA Std. Ctns. of 10 Type 1 Stationary Saw Wheels Fiberglass Reinforced Resin Bonded For use in production cut-off applications. Fast cutting, reliable performance. USA SIZE MAX. STD. ORDER PRICE STD. ORDER PRICE DIA. x THICK. x ARBOR RPM GRADE CTN. NO. EACH GRADE CTN. NO. EACH 10 x 3/3 x 5/ A4R $ x 1/8 x 5/ A4R A30RB $ x 1/8 x A4R A30RB x 1/8 x A4R A30RB x 1/8 x A4R A30RB x 5/3 x A4R A30RB x 5/3 x A4R x 3/16 x A30RB

30 Depressed Center Wheels Type 7 General Purpose Wheels Aluminum Oxide Fiberglass Reinforced Resin Bonded For Metal, Stainless For safe and efficient metal removal in all portable grinding operations. Remove weld beads, burrs, and rough edges aggressively, yet economically. Long life. 1 Buy Std. Ctn. Deduct 10% USA ALUMINUM OXIDE ALUMINUM OXIDE SIZE MAX. STD. ORDER PRICE STD. ORDER PRICE DIA. x THICK. x ARBOR RPM GRADE CTN. NO. EACH GRADE CTN. NO. EACH 4 x 1/4 x 5/ A4R $1.0 A30S $ / x 1/8 x 7/ A4R A30S / x 1/4 x 7/ A4R A30S / x 1/4 x 5/ A4R A30S x 1/4 x 7/ A4R A30S x 1/8 x 7/ A4R A30S x 1/8 x 5/ A4R A30S x 1/4 x 7/ A4R A30S x 1/4 x 5/ A4R A30S x 1/8 x 7/ A4R A30S x 1/8 x 5/ A4R A30S x 1/4 x 7/ A4R A30S x 1/4 x 5/ A4R A30S Type 7 Premium Performance Zirconia Aluminum Fiberglass Reinforced Resin Bonded For Metal, Stainless Alloys USA ZIRCONIA ALUMINUM ZIRCONIA ALUMINUM SIZE MAX. STD. ORDER PRICE STD. ORDER PRICE DIA. x THICK. x ARBOR RPM GRADE CTN. NO. EACH GRADE CTN. NO. EACH 4 x 1/4 x 5/ ZA4T $.4 4-1/ x 1/8 x 7/ ZA4T ZA4S $ / x 1/4 x 7/ ZA4T ZA0Q / x 1/4 x 5/ ZA4T x 1/8 x 5/ ZA4S x 1/4 x 7/ ZA4T ZA0Q x 1/4 x 5/ ZA4T ZA0Q x 1/8 x 7/ ZA4S x 1/8 x 5/ ZA4S x 1/4 x 7/ ZA4T ZA0Q x 1/4 x 5/ ZA4T ZAOQ Limited Quantities 36

31 Depressed Center Wheels Type 7 Quickie Cut Thin Reinforced Cut-Off Wheels CGW Quickie Cut Thin Reinforced Type 7 Cut-Off wheels are an excellent general purpose wheel with an Aluminum Oxide / Zirconia mixture. Zirconia grain allows for faster cutting and longer life. Use on Steel and Stainless Steel. USA USA SIZE MAX. STD. ORDER PRICE STD. ORDER PRICE DIA. x THICK. x ARBOR SPEC RPM CTN. NO. EACH GRADE CTN. NO. EACH 4 x.040 x 5/8 ZA60-S-BF 15, $ / x.045 x 7/8 ZA60-S-BF 13, A60SST $ x.045 x 7/8 ZA60-S-BF 1, A60SST x.045 x 7/8 ZA60-S-BF 10, x 1/16 x 7/8 ZA60-S-BF 8, x 1/16 x 7/8 ZA60-S-BF 6, Buy Std. Ctn. Deduct 10% Type 7 For Masonry, Concrete Silicon Carbide Depressed Center Wheels Made with silicon carbide grain, C4R is designed for all concrete and masonry applications. Also offers fast grinding action on nonferrous materials. USA USA SIZE MAX. STD. ORDER PRICE STD. ORDER PRICE STD. ORDER PRICE DIA. x THICK. x ARBOR RPM GRADE CTN. NO. EACH GRADE CTN. NO. EACH 4-1/ x 1/4 x 7/ C4R $1.63 C4/30P $.75 7 x 1/4 x 5/ C4R C4/30P x 1/4 x 5/ C4R C4/30P Type 8 General Purpose Wheels Fiberglass Reinforced Resin Bonded For Metal, Stainless Type 8 ( saucer shaped ) wheels will grind aggressively at less than a 15 Degree angle to the workpiece, versus 30 to 45 Degrees for a Type 7 wheel. This brings the operator s elbow down to a more comfortable level in some applications, reducing fatigue. USA SIZE MAX. STD. ORDER PRICE STD. ORDER PRICE DIA. x THICK. x ARBOR RPM GRADE CTN. NO. EACH GRADE CTN. NO. EACH 7 x 1/4 x 7/ A4R $3.09 A30S $ x 1/4 x 5/ A4R A30S x 1/4 x 7/ A4R A30S x 1/4 x 5/ A4R A30S Type 7 Cut/Grind/Finish Reinforced Rt. Angle Grinder Wheels High performance wheels made to cut quickly, grind easily and finish work surfaces with ONE wheel. Fiberglass net reinforcement provides added strength and flexibility. For working on flat grinding surfaces. Most efficient when used between 0-15 angle. The best choice for smooth finishing. Suitable For: Steel & Stainless Steel. Contaminate free wheel has < 0.1% iron, sulfur, or chlorine for rust-free and corrosion-free results. Type 7 & Type 9 Semi-Flexible Wheels Eliminate wheel-change downtime by grinding and finishing with the same wheel. A high quality aluminum grinding product, runs virtually load free. Performs well in all metal applications. Available in convex faced Type 9 for contoured surfaces, or Type 7 for flat surfaces. Use at a minimum 15 Degree angle. Do not use flat. SIZE MAX. STD. ORDER PRICE DIA. x THICK. x ARBOR SPEC RPM CTN. NO. EACH 4 1/ x 3/3 x 7/8 A36S 13, $ / x 3/3 x 5/8-11 A36S 13, x 3/3 x 7/8 A36S 1, x 3/3 x 5/8-11 A36S 1, x 3/3 x 7/8 A36S 10, x 3/3 x 5/8-11 A36S 10, USA SIZE MAX. STD. ORDER PRICE DIA. x THICK. x ARBOR RPM FINISH CTN. NO. EACH Type 7 Medium 4-1/ x 1/8 x 7/ Grit $ x 1/8 x 5/ Grit Type 9 Medium 7 x 1/8 x 5/ Grit

32 Abrasive Flap Discs Zirconium Abrasive Flap Discs are used for coarse and intermediate grinding of welds, deburring, rust removal and snagging. Bridges the gap between angle grinding wheels and resin fiber discs, providing aggressive cutting action and longer life than fiber discs. Type 9 Angled Style Flap Discs Zirconium Grain A working angle of 15 to 5 Degrees. Excellent for contour or edge work. Phenolic resin/fiber backing Aluminum backing provides rigid support CGW XL discs have is used to prevent scratching for maximum aggression; recyclable. approximately 60% the work piece during operation. more material. 1 Buy Std. Ctn. Deduct 10% XL PHENOLIC BACKING PHENOLIC BACKING PHENOLIC BACKING PHENOLIC BACKING ALUMINUM BACKING STD. ORDER ORDER ORDER ORDER ORDER SIZE GRIT CTN. NO. PRICE NO. PRICE NO. PRICE NO. PRICE NO. PRICE 4-1/ x 7/ $ $ $ / x 7/ $ $ / x 7/ / x 7/ / x 7/ / x 7/ x 7/ x 7/ x 7/ Other sizes, and 5/8-11 Hub Style are also available. Std. Carton Qty. only. Type 7 Flat Style Flap Discs Ideal for working angles less than 15 Degrees. Smooth grinding. Zirconium Grain High rate of stock removal and long life in demanding applications. CGW XL and Weiler Big Cat Abrasive Flap Discs feature a thicker disc with a higher density of flaps which conform to curved surfaces producing a consistent finish. 30% to 40% longer life than standard flap discs. For those who value parts-per-disc over price-per-disc. XL USA MADE USA MADE Big Cat PHENOLIC BACKING PHENOLIC BACKING PHENOLIC BACKING PHENOLIC BACKING ZIRCONIUM GRAIN ZIRCONIUM GRAIN ZIRCONIUM GRAIN ZIRCONIUM GRAIN STD. ORDER ORDER ORDER ORDER SIZE GRIT CTN. NO. PRICE NO. PRICE NO. PRICE NO. PRICE 4-1/ x 7/ $ / x 7/ $ / x 7/ $ $ / x 7/ / x 7/ / x 7/ x 7/ x 7/ x 7/ Adapting Nuts & Spanner Wrench For discs with 7/8 arbor hole 4 ORDER PRICE DESCRIPTION THREAD NO. EACH Adapting nuts 5/ $3.19 Spanner wrench Right Angle Adapting Nut Tiger Disc Adapting Nut Grinder # Abrasive # Flap Disc (Not for use with Resin Fiber Discs)

33 Mini Flap Discs & Quick Change Discs Mini Flap Discs - Type 7 Zirconia Grain Buy Std. Ctn. Deduct 10% 4 For use on Die Grinders, these mini flap discs combine grinding and finishing applications into one step, while providing the convenience and versatility of Quick Change Discs. They are designed to prevent walking, allow access to tight areas, and reduce heat build-up. Applications: Grinding and finishing in one step. Grinding, deburring and blending on steel/stainless steel. Jobs requiring high aggression & rapid stock removal. Metal fabrication requiring light weld blending or edge chamfering. USA MADE BOBCat TYPE 7 (S HUB) TYPE 7 (R HUB) TYPE 7 (S HUB) PKG. ORDER ORDER ORDER SIZE GRIT RPM QTY. NO. PRICE NO. PRICE NO. PRICE 36 4, $ $ , $ , , , , , , , , Quick Change Laminated Discs Turn On style, (S-Hub) shown Use on Die Grinders for deburring, blending, finishing, removing tool marks, and die polishing on all types of materials. Suitable for a wide variety of light fabrication, repair and maintenance applications. Strong -Ply design for flat or contour work. Aluminum Oxide - Color: Brown General purpose disc for grinding, deburring, and blending on ferrous metals. Zirconia AO w/grinding Aid - Color: Green Excellent disc for rapid stock removal on Stainless Steel. Lubricated super-size Grinding Aid coat for cooler running. Premium Ceramic - Color: Pink Premium grain for greater durability and aggressive cut rates, including hard metals. 4 ALUMINUM OXIDE ZIRCONIA AO W/GRINDING AID PREMIUM CERAMIC ROLL ON TURN ON ROLL ON TURN ON ROLL ON TURN ON PKG. (R HUB) (S HUB) PRICE (R HUB) (S HUB) PRICE (R HUB) (S HUB) PRICE DIAM. GRIT RPM QTY. ORDER NO. ORDER NO. PER PACK ORDER NO. ORDER NO. PER PACK ORDER NO. ORDER NO. PER PACK 36 5, $ $ $ , , , , , , , , , , , , , Quick Change Disc Rubber Holder Pads Medium grade reinforced rubber holder pad. Available for either internally threaded (S Hub) or externally threaded (R Hub) Quick Change discs. R-HUB S-HUB ORDER PRICE ORDER PRICE SIZE RPM NO. EACH NO. EACH 1 40, $ $ / 5, , ,

34 Resin Fibre Discs GRAIN SELECTOR GRAIN FEATURES APPLICATIONS Aluminum Oxide Fast, smooth cutting action All purpose weld removal and blending Tough and flexible Surface preparation and finishing High resistance to heat, glazing, and loading of ferrous metals, plastic, and wood Zirconium Superior cutting action High performance grinding of stainless More durable longer life steel, tool steel, and hard-to-grind Ultra high resistance to heat, glazing, and loading materials and exotic metals. 1 Buy Std. Ctn. Deduct 10% Buy Std. Ctn. ALUMINUM OXIDE ZIRCONIUM ALUMINUM OXIDE Deduct ALUMINUM OXIDE STD. ORDER ORDER ORDER 10% ORDER SIZE GRIT CTN. NO. PRICE NO. PRICE NO. PRICE NO. PRICE 4 x 5/ $ x 5/ x 5/ x 5/ x 5/ / x 7/ / x 7/ $ $ $ / x 7/ / x 7/ / x 7/ / x 7/ / x 7/ / x 7/ x 7/ x 7/ x 7/ x 7/ x 7/ x 7/ x 7/ x 7/ x 7/ x 7/ x 7/ x 7/ x 7/ x 7/ x 7/ x 7/ Ideal for all sanding operations on metal, plastic, fiberglass, etc. Smooth face pads available upon request. Supplied with 5/8-11 Arbor Hole, except the 4-1/ which will be supplied with a 5/8 smooth bore. Other arbor holes available upon request. Standard Air-Cooled Backing Pads MAX. ORDER PRICE SIZE DENSITY RPM NO. EACH 4 Flexible 1, $ Medium 1, Rigid 1, / Flexible 11, / Medium 11, / Rigid 11, Flexible 10, Medium 10, Rigid 10, Flexible 7, Medium 8, Rigid 8, Flexible 6, Medium 6, Rigid 6, Nuts and wrenches do not come with pads. Must be ordered separately. ORDER PRICE DESCRIPTION NO. EACH #10 Nut; 5/ $4.90 #103 Nut; 5/8-11 For Pads 3/8-4 5/8-11 Adapter /16-0 5/8-11 Adapter Spanner Wrench

35 PSA Discs PSA Aluminum Oxide Resin Bond Cloth Discs Abrasive cloth discs have a pressure sensitive adhesive backing making them easy to apply to a rubber disc holder. Protective liner speeds disc changing and protects adhesive from work dust. Resin bond discs are made with a heavy resin abrasive cloth, assuring long life, with fast stock removal IMPORT PRICE PRICE ORDER PKG PER ORDER PKG PER GRIT NO. QTY PKG NO. QTY PKG 1/ DIAMETER $ /4 DIAMETER DIAMETER $ $ / DIAMETER $ $ DIAMETER $ $ PSA Abrasive Disc Disc Rolls With Liner Silicon Carbide Grain glue bond, A weight paper. Treated for load resistance, recommended for all grinding of metal, wood and fiberglass. With release paper liner and self storing dispenser. Trouble free, the most efficient disc/roll package available. No grit or dust contamination, great shelf life. Stearate coated. 5 6 PKG ORDER PRICE PER ORDER PRICE PER GRIT QTY NO. PKG NO. PKG $ $ IMPORT PRICE PRICE ORDER PKG PER ORDER PKG PER GRIT NO. QTY PKG NO. QTY PKG 3 DIAMETER $ $ DIAMETER $ DIAMETER $ $ DIAMETER $ DIAMETER $ $ IMPORT PRICE PRICE ORDER PKG PER ORDER PKG PER GRIT NO. QTY PKG NO. QTY PKG 9 DIAMETER $ $ DIAMETER $ $ DIAMETER $ DIAMETER $ DIAMETER $ PSA Disc Holders Optimum performance with PSA Discs MAX. ORDER PRICE DIAM. RPM SHK NO. EACH 3/4 18,000 1/ $ ,000 1/ / 15,000 1/ ,000 1/ ,000 1/

36 Quick Change Discs Available in a Choice of Quick Change Locking Systems. 3 A/O Ply A/O Extra -Ply Zirconia Pro -Ply Ceramic -Ply Ideal for flat or contoured surfaces Best for MRO grinding, deburring, & finishingon ferrous metals. Ideal for flat or contoured surfaces Good for difficult to grind metals, such as aircraft grade aluminum, High Nickel, Chrome Alloys, & heat-sensitive material. Includes grinding aid Better choice for rapid stock removal on Stainless Steel, High Nickel Alloys, & Aluminum Features a grinding aid on a Y-weight backing Best performance under medium-to-heavy pressure Best choice for rapid stock removal on Stainless Steel and High Nickel Alloys. Features a grinding aid for cooler operation Heavy pressure required A/O PLY A/O EXTRA PLY ZIRCONIA PRO PLY CERAMIC PLY TS-STYLE TR-STYLE PKG PRICE TS-STYLE TR-STYLE PKG. PRICE TS-STYLE TR-STYLE PKG. PRICE TS-STYLE TR-STYLE PKG. PRICE DIA. GRIT ORDER NO. ORDER NO. QTY PER PK. ORDER NO. ORDER NO. QTY. PER PK. ORDER NO. ORDER NO. QTY. PER PK. ORDER NO. ORDER NO. QTY. PER PK $ $ $ $ / Holder Pads For All Quick Change Style Discs Available for all small diameter Quick Change style discs, in soft, medium, and firm grades. TS (SocAtt ) TR (Lockit ) TS - TA4 TR - TA4 DEN- MAX. ORDER ORDER PRICE SIZE SITY RPM NO. NO. EACH 3/4 Med. 40, $ Med. 40, / Soft 0, / Med. 5, / Firm 30, Soft 0, Med. 5, Firm 30, TS - TA4 TR - TA4 DEN- MAX. ORDER ORDER PRICE SIZE SITY RPM NO. NO. EACH 3 Soft 1, $ Med Firm 0, /8-11 ARBOR - LARGE DIAMETER, HARD FACE - TS HOLDER PADS 4-1/ Med. 18, Low Profile / Med. 18,

37 Flap Wheels Perfect tool for deburring, blending, finishing and cleaning inside and outside diameters of ferrous and non-ferrous materials. Mounted Flap Wheels (1 3 Diameters) Aluminum Oxide Resin Bond * Permanently affixed 1/4 or 1/4-0 threaded steel shank allows choice of best system for your tooling, and fast wheel changes. Affixed mandrel for concentricity and reduced chatter; less operator fatigue. 1 Buy Std. Ctn. Deduct 10% 1/4 SHANK 1/4-0 SHANK IMPORT STD. ORDER ORDER ORDER ORDER ORDER SIZE GRIT CTN. NO. PRICE NO. PRICE NO. PRICE NO. PRICE NO. PRICE $ $ $ $ $ x / x x / x x Limited Quantities Mounted Flap Wheel Drive Arbor THREAD ADAPTED ORDER PRICE SIZE SIZE NO. EACH 1/4-0 1/ $.90 Large Flap Wheels (4 6 Diameters) Aluminum Oxide Resin Bond * Best Flap Wheel for applications requiring high stock removal. Provides maximum stability and smaller contact areas on work surface. Highest initial cut rate. IMPORT STD. ORDER ORDER SIZE GRIT CTN. NO. PRICE NO. PRICE $ x 1 x 5/ $ x 1 x x x Limited Quantities Unmounted Flap Wheel Reducer Bushings (Used in Pairs) 4 ORDER PRICE/ SIZE NO. PAIR 1 to 1/ $ to 5/ to 3/ Buff & Blend Combi Wheels Wheels are constructed with alternating flaps of Buff & Blend and coated abrasive material. High rate of cut, while providing a uniform scratch pattern. STD. ORDER SIZE GRIT CTN. NO. PRICE $11.79 x 1 x 1/ x 1 x 1/ x x 1/

38 Shop Rolls & Sanding Belts Cloth Shop Rolls Aluminum Oxide * For Quick Stock Removal in Metal Finishing and Polishing Applications * Ability to Tear Desired Amount Eliminates Waste 1 3 IMPORT MADE IN USA ORDER ORDER ORDER SIZE GRIT NO. PRICE NO. PRICE NO. PRICE $ $ $ / / / / / / / / / / Cloth Sanding Belts Aluminum Oxide 1 x 4 x 48 3 x 1 3 x 4 4 x 4 PKG ORDER PRICE ORDER PRICE ORDER PRICE ORDER PRICE ORDER PRICE GRIT QTY NO. PER PKG NO. PER PKG NO. PER PKG NO. PER PKG NO. PER PKG $ $ $ $ $ Limited Quantities * X-Weight * Resin Bonded * Heavy Duty Construction * Ideal for sanding wood or metal Other sizes and grits available upon request. Please inquire. 4 x 36 6 x 48 PKG ORDER PRICE ORDER PRICE GRIT QTY NO. PER PKG NO. PER PKG $ $

39 Abrasive Sheets Quality Import Aluminum Oxide 9 x 11 Cloth Sheets Resin Bonded Ideal for Sanding Wood or Metal Outlasts Paper by as much as 5 Times Silicon Carbide 9 x 11 Waterproof Sheets Latex Impregnated Paper Offers Versatility of Wet or Dry Sanding STD ORDER PRICE GRIT PKG NO. PER PKG $ Emery 9 x 11 Cloth Sheets Resin Bonded Ideal for Metal Finishing where Polishing is more important than Stock Removal STD ORDER PRICE GRIT PKG NO. PER PKG Coarse $3.0 Medium Fine Crocus Cloth 9 x 11 Sheets Resin Bonded Flexible cloth backing Used by machinists & mechanics for smoothing metal surfaces STD ORDER PRICE GRIT PKG NO. PER PKG $ Silicon Carbide 9 x 11 Sandscreen Sheets Unique Screen Mesh Prevents Loading Will Outlast Ordinary Sandpaper by as much as 10 Times Use Wet or Dry on Metal or Wood STD ORDER PRICE GRIT PKG NO. PER PKG $ STD ORDER PRICE GRIT PKG NO. PER PKG Fine $

40 Cartridge Rolls 3 Straight Cartridge Rolls Aluminum Oxide Resin Bond Cartridge Rolls feature a multi-layer, multi-wear design for long lasting durability. New abrasive cutting points are exposed throughout the life of the roll. Use for flash removal, polishing, removing machine tool marks, edge breaking, etc. PRICE STD ORDER PER SIZE GRIT PKG NO. PKG 3/16 x 1 x 3/ $1.69 3/16 x 1 x 3/ /16 x 1 x 3/ /16 x 1 x 3/ /4 x 1 x 1/ /4 x 1 x 1/ /4 x 1 x 1/ /4 x 1 x 1/ /4 x 1 x 1/ /4 x 1 x 1/ /4 x 1 x 1/ /4 x 1-1/ x 1/ /4 x 1-1/ x 1/ /4 x 1-1/ x 1/ /4 x 1-1/ x 1/ /4 x 1-1/ x 1/ /4 x 1-1/ x 1/ /4 x 1-1/ x 1/ /4 x 1-1/ x 1/ /4 x x 1/ /4 x x 1/ /4 x x 1/ /16 x 1 x 1/ /16 x 1-1/ x 1/ /16 x 1-1/ x 1/ /16 x 1-1/ x 1/ /8 x 1 x 1/ /8 x 1 x 1/ /8 x 1 x 1/ /8 x 1 x 1/ /8 x 1 x 1/ /8 x 1 x 1/ PRICE STD ORDER PER SIZE GRIT PKG NO. PKG 3/8 x 1-1/ x 1/ $ /8 x 1-1/ x 1/ /8 x 1-1/ x 1/ /8 x 1-1/ x 1/ /8 x 1-1/ x 1/ /8 x 1-1/ x 1/ /8 x 1-1/ x 1/ /8 x 1-1/ x 1/ /8 x x 1/ /8 x x 1/ /8 x x 1/ /8 x x 1/ / x 1 x 1/ / x 1 x 1/ / x 1 x 1/ / x 1 x 1/ / x 1-1/ x 1/ / x 1-1/ x 1/ / x 1-1/ x 1/ / x 1-1/ x 1/ / x 1-1/ x 1/ / x 1-1/ x 1/ / x 1-1/ x 1/ / x 1-1/ x 1/ / x 1-1/ x 1/ / x x 1/ / x x 1/ / x x 1/ / x x 3/ / x x 3/ / x x 1/ PRICE STD ORDER PER SIZE GRIT PKG NO. PKG 5/8 x 1-1/ x 1/ /8 x 1-1/ x 3/ /8 x x 3/ /8 x x 3/ /8 x x 3/ /4 x 1 x 1/ /4 x 1 x 3/ /4 x 1 x 3/ /4 x 1-1/ x 1/ /4 x 1-1/ x 1/ /4 x 1-1/ x 3/ /4 x 1-1/ x 3/ /4 x 1-1/ x 3/ /4 x 1-1/ x 3/ /4 x 1-1/ x 1/ /4 x 1-1/ x 1/ /4 x 1-1/ x 1/ /4 x x 3/ /4 x x 3/ /4 x x 3/ /4 x x 3/ /4 x x 3/ /4 x x 1/ /4 x x 1/ /4 x x 1/ x 1-1/ x 1/ x 1-1/ x 1/ x x 1/ x x 1/

41 Cartridge Rolls Full Taper Cartridge Rolls PRICE STD ORDER PER SIZE GRIT PKG NO. PKG 3/8 x 1 x 1/ $46.0 3/8 x 1 x 1/ /8 x 1 x 1/ /8 x 1 x 1/ /8 x 1-1/ x 1/ /8 x 1-1/ x 1/ /8 x 1-1/ x 1/ PRICE STD ORDER PER SIZE GRIT PKG NO. PKG 1/ x 1-1/ x 1/ $ / x 1-1/ x 1/ / x 1-1/ x 1/ / x 1-1/ x 1/ / x 1-1/ x 1/ / x 1-1/ x 1/ / x 1-1/ x 1/ PRICE STD ORDER PER SIZE GRIT PKG NO. PKG 1/ x x 1/ $8.76 1/ x x 1/ / x x 1/ /4 x 1-1/ x 1/ /4 x 1-1/ x 3/ /4 x 1-1/ x 3/ /4 x 1-1/ x 3/ Mandrels For Cartridge Rolls Cartridge Rolls of 3/4 length 1/ Pilot Length Cartridge Rolls of 1 length 3/4 Pilot Length Cartridge Rolls of 1-1/ length 1 Pilot Length Cartridge Rolls of length 1-1/ Pilot Length Cartridge Rolls of -1/ length Pilot Length PILOT PILOT SHANK SHANK O/A ORDER PRICE DESCRIPTION DIA. LGTH DIA. LGTH LGTH NO. EACH CM-B 3/3 3/4 1/8 1-3/ $.81 CM-E 3/3 3/4 1/4 1-3/ CM-F 3/3 1 1/4 1-1/ CM-3 1/8 1/ 1/8 1-1/ CM-4 1/8 3/4 1/8 1-3/ CM-5 1/8 1 1/8 1-1/ CM-6 1/8 1-1/ 1/ / CM-7 1/8 1/ 1/4 1-1/4-1/ CM-8 1/8 3/4 1/4 1-1/4-1/ CM-9 1/8 1 1/4 1-1/4-3/ PILOT PILOT SHANK SHANK O/A ORDER PRICE DESCRIPTION DIA. LGTH DIA. LGTH LGTH NO. EACH CM-10 1/8 1-1/ 1/4 1-1/4 3-1/ $.7 CM-11 1/8 1/4 1-1/ CM-15 3/16 3/4 1/4 1-1/4-1/ CM-16 3/16 1 1/4 1-1/4-1/ CM-17 3/16 1-1/ 1/4 1-1/4 3-3/ CM-18 3/16 1/4 1-1/ CM-1 1/4 1 1/4 1-1/ CM- 1/4 1-1/ 1/4 1-1/4 3-1/ CM-3 1/4 1/4 1-1/

42 Non-Woven Abrasives Surface Conditioning Discs Quick Change Discs, Aluminum Oxide (A/O), FE Type FE material is very flexible, with high edge durability. FE provides a high initial and extended rate of cut. Performs well on flat and contoured surfaces. Ideal on a variety of deburring, blending and cleaning applications. TS-STYLE TR-STYLE HOOK & LOOP ORDER ORDER ORDER PKG PRICE SIZE GRIT MAX. RPM NO. NO. MAX. RPM NO. QTY PER PKG 1 Coarse 1,000-0, $ Medium 1,000-0, Very Fine 1,000-0, / Coarse 1,000-0, / Medium 1,000-0, / Very Fine 1,000-0, Coarse 1,000-0, Medium 1,000-0, Very Fine 1,000-0, Coarse 10,000-18, Medium 10,000-18, Very Fine 10,000-18, / Coarse ,000-8, / Medium ,000-8, / Very Fine ,000-8, Coarse ,000-7, Medium ,000-7, Very Fine ,000-7, Coarse ,000-6, Medium ,000-6, Very Fine ,000-6, Type GP Surface Conditioning Discs are also available upon request. Call for delivery. Not as flexible as Type FE, works especially well on flat surfaces. Holder Pads For All Quick Change Style Discs Available for all small diameter Quick Change style discs, in soft, medium and firm grades. TS-STYLE TR-STYLE w/ta4 w/ta4 MAX. ORDER ORDER PRICE SIZE DENSITY RPM NO. NO. EACH 3/4 Medium 40, $ Medium 40, / Soft 0, / Medium 5, / Firm 30, Soft 0, Medium 5, Firm 30, Soft 1, Medium 0, Firm 0, TS (SocAtt ) TR (Lockit ) Holder Pads For Hook & Loop Style Discs MAX. ORDER PRICE SIZE RPM NO. EACH 4-1/ with 5/ , $ with 5/ , with 5/8-11 6, High Strength Buff & Blend Discs With Center Hole, Aluminum Oxide (A/O) The best product for finishing and light deburring applications. A very conformable and durable tool for finishing and polishing applications on metals, plastics and glass. MAX. PKG ORDER PRICE SIZE HOLE GRADE RPM QTY NO. PER PKG 5 1/ Very Fine 4, $ / Very Fine 3, / Very Fine 3, / Very Fine, / Very Fine, /4 Very Fine 1, Buff & Blend Discs Buff & Blend Quick Change GP Discs, Aluminum Oxide (A/O) Flexible, conformable discs constructed of GP material, which provides a high rate of cut while producing consistent finishes. Applications include blending, cleaning, deburring and finishing. TS-STYLE TR-STYLE MAX. PKG ORDER ORDER PRICE SIZE GRIT RPM QTY NO. NO. PER PKG 1-1/ Medium 1, $ / Fine 1, / Very Fine 1, Medium 1, Fine 1, Very Fine 1, Medium 8, Fine 8, Very Fine 8, TS (SocAtt ) TR (Lockit ) 338

43 Non-Woven Abrasives Type 7 Unitized Discs Manufactured from the highest quality Unitized material. Unique design offers material removal while imparting a final finish. Used in conjunction with, and sometimes in lieu of, a coated abrasive Resin Fibre Disc or Flap Disc. Deburring Edge Breaking Blending Cleaning Final Polishing 500 Soft Density - Finishing & Polishing 600 Medium Density - Blending & Polishing 700 Medium Density - Deburring & Cleaning 800 Hard Density - Deburring STD. ORDER PRICE SIZE SERIES CTN. NO. EACH 4-1/ x 7/ $ / x 7/ / x 7/ / x 7/ / x 7/ Buy Std. Ctn. Deduct 10% * *excluding accessories Quick Change Surface Conditioning Discs Use on Die Grinders for deburring, blending, finishing, cleaning and polishing. Suitable for a wide variety of light fabrication, repair and for stainless steel, and ferrous & non-ferrous metals. Roll On style, (R-Hub) shown 4 ALUMINUM OXIDE ROLL ON TURN ON PKG. (R HUB) (S HUB) PRICE DIAM. GRIT RPM QTY. ORDER NO. ORDER NO. PER PACK Coarse 5, $4.31 Medium 5, A Very Fine 5, Coarse 0, Medium 0, A Very Fine 0,

44 Non-Woven Abrasives Convolute Wheels Convolute Wheels are constructed by wrapping non-woven nylon, impregnated throughout with abrasive grain, around a hard core. GP Plus Wheels Removes medium to heavy burrs and edge breaking. MAX. ORDER PRICE SIZE GRAIN SPEC. GRADE RPM NO. EACH 6 x 1/ x 1 S/C 8SF Fine 6, $ x 1/ x 1 S/C 8SM Medium 6, x 1/ x 1 S/C 9SF Fine 6, x 1 x 1 S/C 8SF Fine 6, x 1 x 1 S/C 8SM Medium 6, x 1 x 1 S/C 9SF Fine 6, x x 1 S/C 9SF Fine 6, x 1/ x 3 S/C 8SF Fine 4, x 1/ x 3 S/C 9SF Fine 4, x 1 x 3 S/C 8SF Fine 4, x 1 x 3 S/C 8SM Medium 4, x 1 x 3 S/C 9SF Fine 4, x x 3 S/C 8SF Fine 4, x x 3 S/C 8SM Medium 4, x 1/ x 5 S/C 8SF Fine 3, x 1 x 5 S/C 8SF Fine 3, x 1 x 5 S/C 9SF Fine 3, x x 5 S/C 8SF Fine 3, x x 5 S/C 9SF Fine 3, LDW (Light Deburring Wheels) Removes light burrs; use prior to polishing. MAX. ORDER PRICE SIZE GRAIN SPEC. GRADE RPM NO. EACH 6 x 1/ x 1 S/C 6SF Fine 6, $ x 1/ x 1 S/C 7SF Fine 6, x 1/ x 1 S/C 8SF Fine 6, x 1 x 1 S/C 6SF Fine 6, #6 x 1 x 1 S/C 7SF Fine 6, x 1 x 1 S/C 8SF Fine 6, x 1/ x 3 S/C 8SF Fine 4, x 1 x 3 S/C 7SF Fine 4, x 1 x 3 S/C 8SF Fine 4, x 1/ x 5 S/C 7SF Fine 3, x 1/ x 5 S/C 8SF Fine 3, x 1 x 5 S/C 7SF Fine 3, x 1 x 5 S/C 8SF Fine 3, x x 5 S/C 8SF Fine 3, Deburring Wheels Excellent starting point for medium to heavy deburring and polishing. MAX. ORDER PRICE SIZE DENSITY GRAIN GRADE RPM NO. EACH 6 x 1/ x 1 Medium S/C Fine 6, $ x 1/ x 1 Hard S/C Fine 6, x 1 x 1 Medium S/C Fine 6, x 1 x 1 Hard S/C Fine 6, x x 1 Hard S/C Fine 6, x 1/ x 3 Hard S/C Fine 4, x 1 x 3 Medium S/C Fine 4, x 1 x 3 Hard S/C Fine 4,

45 Non-Woven Abrasives Standard Abrasives - Unitized Mounted Points Unitized Mounted Points are made from high durability material and are available in standard ANSI shapes for varying workpiece dimensions and applications. 3 Series: High Durability, Medium density (Blending/Polishing) High Durability, Medium density (Deburring/Cleaning) High Durability, Hard density (Deburring/Cleaning) A SHAPES MAX. PKG ORDER PRICE SHAPE RPM SERIES GRAIN GRADE QTY NO. EACH A1 34, S/C Fine $11.15 A1 34, A/O Fine A1 34, S/C Fine A1 34, A/O Coarse A1 34, A/O Medium A5 35, A/O Coarse A5 35, A/O Medium B SHAPES MAX. PKG ORDER PRICE SHAPE RPM SERIES GRAIN GRADE QTY NO. EACH B5 45, A/O Fine $5.4 B5 45, S/C Fine B5 45, A/O Coarse B5 45, A/O Medium B90 34, A/O Fine B90 34, S/C Fine B90 34, A/O Medium B11 45, A/O Fine B11 45, A/O Coarse B11 45, A/O Medium Size Chart: SHAPE SIZE A1 1 x 1 x 1/4 A5 1 x 1 x 1/4 B5 3/8 x 3/4 x 1/8 B90 1/ x 1/ x 1/8 B11 1/ x 1/ x 1/8 SHAPE SIZE W160 1/4 x 1/4 x 1/8 W163 1/4 x 1/ x 1/8 W183 1/ x 1/4 x 1/8 W185 1/ x 1/ x 1/8 W0 1 x 1 x 1/4 W SHAPES MAX. PKG ORDER PRICE SHAPE RPM SERIES GRAIN GRADE QTY NO. EACH W160 81, A/O Coarse $.79 W160 81, A/O Medium W163 60, A/O Coarse W163 60, A/O Medium W183 51, S/C Fine W183 51, A/O Fine W183 51, S/C Fine W183 51, A/O Coarse W183 51, A/O Medium W185 34, A/O Fine W185 34, S/C Fine W185 34, A/O Fine W185 34, S/C Fine W185 34, A/O Coarse W185 34, A/O Medium W0 5, A/O Coarse W0 5, A/O Medium x 9 Hand Pads Hand Pads are flexible, washable, and conform to workpiece. Ideal for hand applications on metals, composite or plastic surfaces. Use for cleaning, finishing or polishing. Color coded. Hand Pad Holder For use with 3 x 6 pads Order No Price each... $ IMPORT COLOR ORDER PKG PRICE ORDER PKG PRICE ORDER PKG PRICE CODE APPLICATION NO. QTY PER PKG NO. QTY PER PKG NO. QTY PER PKG White Non-Abrasive Pad $ $55.5 For Polishing and Light Cleaning Grey Ultra-Fine S/C Abrasive Pad $ For Free Hand Cleaning & Finishing Usable with mild detergents Maroon General Purpose A/O Abrasive Pad For Basic Cleaning and Finishing Economy Grade Usable with most solvents Tan Heavy Duty A/O Abrasive Pad For Heavy Duty Cleaning or Fast Action Finishing Usable with most solvents Scouring Hand Pads Green Industrial Green Commercial (Food Processing)