Stock availability of products. Further products. Density Density may vary depending on the formula, thickness and colouration.

Transcription

1 Catalogue Semi-Finished Parts 2013

2 Key Processing Stock availability of products Deep-drawing Riveting Bold type Light-faced type Ready for dispatch (main warehouse Kirn) Supplied on request Turning Gluing Milling Backing, laminating Further products Sheets in different colours, different formats and intermediate thicknesses available upon request. Solid rods and hollow rods in special lengths available upon request. Welding rods in different dimensions and thicknesses available upon request. Lacquering/spray painting Cold curving Drilling Printing Laser cutting Notes Density Density may vary depending on the formula, thickness and colouration. Sizes Unless otherwise stated, sizes specified in tables refer to millimetres (). Water-jet cutting Edge polishing Bolting Sawing Cutting Warm bending Die-cutting Welding Cold forming Weight All weights specified are considered to be theoretical values based on the nominal dimensions. Calculations are based on the effective weight determined. Using sheets as an example, the formula is as follows: Theoretical weight [kg] = length [m] x width [m] x thickness [] x density [g/cm 3 ] Example: (PE-HWU sheet, density: g/cm 3 ) Length Width Thickness kg/unit 2,000 1, > 2.0 x 1.0 x 10.0 x = 19.1 Technical data All specifications are deemed to be approximate values and may vary depending on the processing methods used. In general, data specified applies to average values measured on extruded sheets with a thickness of 4. In the case of sheets manufactured by means of pressing, testing is generally performed on sheets with a thickness of 20. Deviations from the values specified are possible if the sheets in this thickness are not available. In the case of backed sheets, all technical specifications relate to the non-backed base sheets. Information presented herein is not necessarily applicable to products that have undergone downstream processing. Suitability of materials for a specific field of application must be assessed by the party responsible for processing or the end-user. All technical specifications presented herein are designed merely to provide assistance in terms of project planning. They do not constitute a guarantee of specific properties or qualities.

3 Contents Company Profile 4 1 PE SIMONA PE-HWU, SIMONA PE 100, SIMONA PE-HWST, SIMONA PE-HWV, SIMONA PE-W, SIMONA PE FOAM, SIMONA PE-EL, SIMONA PE-HML 500, dehoplast PE-500, dehoplast PE-1000, PE regrind products, Special PE products 2 PP SIMONA PP-DWU, SIMONA PP-DWST, SIMONA PP-EL, SIMONA PP white, SIMONA PPs, SIMONA PP-DWV, SIMONA PP FOAM, SIMONA PP-C, SIMONA PP-R, frisylen, Special PP products PVC rigid SIMONA PVC-CAW, SIMONA PVC-MZ, SIMONA PVC-GLAS, SIMONA PVC-C, SIMONA PVC-KYRNIT, Special PVC rigid products PVC foamed SIMONA SIMOPOR, SIMONA COPLAST, Special PVC foamed products PETG SIMONA SIMOLUX, Special PETG products PVDF, E-CTFE SIMONA PVDF, SIMONA PVDF-EL, SIMONA E-CTFE, Special PVDF and E-CTFE products 7 Additional Product Information Finished Parts, Twin-Wall Sheets, Multilayer Sheets, SIMOSHIELD, Eco-Ice, PE FOAM/PP FOAM, Hollow Rods, Profiles, Tank Corners, ATEX, REACH Material Specifications PE, PP, PVC rigid, PVC foamed, PETG, PVDF, E-CTFE Services Customised solutions for your applications, Consulting and information service, Scrapers, SIMCHEM, Calculation form for rectangular tanks, Calculation form for circular tanks, Calculation form for tanks made of twin-wall sheets, Chemical resistance form, form for the lining of bulk material and conveyor systems, SIMONA worldwide (addresses) 194 Services PP PVC rigid PVC foamed PETG PVDF, E-CTFE Other Info Specifications PE 2013 Catalogue Semi-Finished Parts 3

4 Global Thermoplastic Solutions SIMONA is acknowledged as one of the leading producers and development partners in the field of thermoplastic products. We offer best-in-class solutions for your applications: from the chemical process industry, water and energy utilities, coodity supply and mobility to the environmental technology and construction sectors. What is more, our operations span the globe. Drawing on our outstanding abilities in process engineering, we specialise in the production of plastic sheets, fittings and piping systems tailored to high-end requirements. Our ambition is to become your first point of contact when it comes to safety- and eco-specific applications. Best-in-class quality Regular audits and endurance tests are a valuable source of information for ongoing product development and refinement by our R&D engineers. This provides the basis for an innovative, premium-quality product range. Expert advice As a customer, you always take centre stage: from project development and materials procurement to manufacturing and onsite planning, our expertise is recognised as an industry benchmark. At the same time, we em - brace new technical challenges with passion and coitment. SIMONA AG's management systems relating to quality, the environment and energy resources are certified in accordance with DIN EN ISO 9001, DIN EN ISO and DIN EN ISO The quality management system of SIMONA AG in compliance with the Pressure Equipment Directive is certified to 97/23/EC Annex I, Para Catalogue Semi-Finished Parts 2013

5 2013 Catalogue Semi-Finished Parts 5

6 Welcome to SIMONA Comprehensive product range SIMONA boasts one of the world's most extensive ranges of thermoplastic products: J Sheets J Finished parts and profiles J Welding rods J Solid and hollow rods J Pipes and fittings J Valves We have access to an extensive range of high-quality materials for the manufacture of our products. Additionally, we are able to modify existing materials or develop entirely new ones as a basis of customised product solutions. Global business network SIMONA operates production sites in Europe, America and Asia. Maintaining a global network of subsidiaries and distribution partners, we offer fast, flexible and reliable lines of supply. Cutting-edge solutions Our products are already contributing to people's well-being and quality of life in various fields of application. SIMONA City is designed to capture the spirit of diversity that infuses our port - folio of products. It is also to be seen as an invitation to our business partners to join us in expand ing the horizons of plastics engineering around the globe. Discover SIMONA City. v 6 Catalogue Semi-Finished Parts 2013

7 2013 Catalogue Semi-Finished Parts 7

8

9 Product Range Thanks to the diversity, quality and sheer breadth of our product range, we are able to deliver perfect solutions for virtually any application Catalogue Semi-Finished Parts 9

10 1 PE 10 Catalogue Semi-Finished Parts

11 PE 1.1 Product group PE-HWU Product group PE Product group PE-HWST Product group PE-HWV Product group PE-W Product group PE FOAM Product group PE-EL Product group PE-HML Product group dehoplast PE Product group dehoplast PE Product group PE regrind versions Special PE products Catalogue Semi-Finished Parts 11 11

12 1.1 Product group PE-HWU Product types Standard stock item Special types (For further details, please see page 55) PE-HWU, PE-HWU-SK PE-HWU-GK, PE-HWU-B Product properties UV-stabilised High chemical resistance Highly cost-effective Outstanding processing parameters Particularly suited for outdoor applications High strength and rigidity Standard stock item Key Product range: from page Areas of use PE-HWU High heat stability, UV-stabilised, black 13 Chemical Tank and Equipment Construction Power and Electrical Engineering Mechanical Engineering Transport, Materials Handling and Storage Systems Mobility PE-HWU-SK High heat stability, UV-stabilised, polyester-backed, black 16 Lining and Composite Construction Environmental technology Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C to to +80 Processing methods (for details, see key) 12 Catalogue Semi-Finished Parts

13 PE-HWU Product range PE-HWU Certificates Sheets extruded black 9500 Sheets pressed black 9500 Solid Rods black 9500 Welding Rods black 9500 DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Physiological safety in accordance with EU Approved for contact with food in accordance with LFGB and EC Regulation 1935/2004 Sheets PE-HWU Sheets, extruded, black 9500 without protective foil Thckn x x x Catalogue Semi-Finished Parts 13 13

14 PE-HWU Sheets, pressed, black 9500 without protective foil Thckn pressed 2000 x x x planed 2000 x x Solid Rods PE-HWU Solid Rods, black 9500 Ø Weight 1000 kg/m PE-HWU Solid Rods, black 9500 Ø Weight 1000 kg/m Catalogue Semi-Finished Parts

15 Welding Rods PE-HWU-B Welding Rods, black 9500 a/d b Length Rod 1 m Rod 2 m Coil Spool 2 kg m/kg Round (RD) Triangular (TA 90) Triangular (TA 80) Spool 10 kg Three-core (TL) m rods in 2 kg bags 2 m rods in 2 kg bags 2013 Catalogue Semi-Finished Parts 15 15

16 PE-HWU-SK Product range PE-HWU-SK Sheets extruded black 9500 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Sheets PE-HWU-SK Sheets, extruded, black 9500 without protective foil backed Thckn x x x Nominal thickness equals residual wall thickness. 16 Catalogue Semi-Finished Parts

17 1.2 Product group PE 100 Product types Standard stock item Special types (For further details, please see page 55) PE 100, PE 100 AR PE 100 RC Product properties UV-stabilised Suitable for tank/vessel construction requiring mandatory test certificates High chemical resistance Outstanding processing parameters High strength and rigidity Extremely versatile Standard stock item Key Product range: from page PE 100 High heat stability, UV-stabilised, creep strength at 50 years, 20 C, medium water = 10.0 MPa, DIBt-approved for tanks requiring mandatory test certificates, black 18 PE 100 AR High heat stability, with anti-slip surface on one side 22 Areas of use Chemical Tank and Equipment Chemical Tank and Equipment Construction Construction Power and Electrical Engineering Power and Electrical Engineering Mechanical Engineering Mechanical Engineering Transport, Materials Handling and Transport, Materials Handling and Storage Systems Storage Systems Mobility Mobility Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C Processing methods (for details, see key) to (relates to the non-anti-slip side) 50 to Catalogue Semi-Finished Parts 17 17

18 PE 100 Product range PE 100 Certificates Sheets extruded black 9500 Sheets pressed black 9500 Solid Rods black 9500 Hollow Rods black 9500 DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance Twin-Wall Sheets black 9500 HKP Corner Elements black 9500 Welding Rods black 9500 with BfR (German Federal Institute for risk valuation) Physiological safety in accordance with EU General DIBt approval (German Institute of Building Technology approval for tanks requiring mandatory test certificates) Approved for contact with food in accordance with LFGB and EC Regulation 1935/2004 Sheets PE 100 Sheets, extruded, black 9500 without protective foil Thckn x x x Catalogue Semi-Finished Parts

19 PE 100 Sheets, pressed, black 9500 without protective foil Thckn pressed 2000 x x x planed 2000 x x Solid Rods PE 100 Solid Rods, black 9500 PE 100 Solid Rods, black 9500 Ø Weight 2000 Ø Weight kg/m kg/m Catalogue Semi-Finished Parts 19 19

20 Hollow Rods PE 100 Hollow Rods, black 9500 Ø d i Order numbers , , , , , , available as of 1st quarter Twin-Wall Sheets PE 100 Twin-Wall Sheets, black 9500 Total thickness Thickness outer skins Web spacing 3000 x 1000 kg/piece HKP Corner Elements PE 100 HKP Corner Elements, black 9500 Angle Length Leg length Total thickness Thickness outer skins Web spacing Catalogue Semi-Finished Parts

21 PE 100 HKP Corner Elements, black 9500 Angle Length Leg length Total thickness Thickness outer skins Web spacing Welding Rods PE 100 Welding Rods, black 9500 a/d 3.0 Length m/kg Rod 1 m Rod 2 m Coil Spool 2 kg Spool 10 kg Round (RD) m rods in 2 kg bags 2 m rods in 2 kg bags Catalogue Semi-Finished Parts 21 21

22 PE 100 AR Product range PE 100 AR Sheets extruded black 9500 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with EU Approved for contact with food in accordance with LFGB and EC Regulation 1935/2004 Anti-slip properties in accordance with DIN for applications in work areas/work spaces Sheets PE 100 AR Sheets, extruded, black 9500 without protective foil Thckn x Catalogue Semi-Finished Parts

23 1.3 Product group PE-HWST Product types Standard stock item Special types (For further details, please see page 55) PE-HWST, PE light blue PE-UV, PE-AS, PE-TF, PE embossed, PE-FL Product properties High heat stability High chemical resistance Physiologically safe according to German Federal Institute for Risk Assessment (BfR) Highly cost-effective High impact resistance even at low temperatures Good slip properties Standard stock item Key Product range: from page Areas of use Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C PE-HWST High heat stability, natural 24 Chemical Tank and Equipment Construction Power and Electrical Engineering Food Industry Mechanical Engineering Transport, Materials Handling and Storage Systems to +80 PE light blue High heat stability, specially designed for the rehabilitation of drinking-water tanks, light blue Elevated Tanks Power and Electrical Engineering to +80 Processing methods (for details, see key) 2013 Catalogue Semi-Finished Parts 23 23

24 PE-HWST Product range PE-HWST Certificates Sheets extruded natural 9150 Sheets pressed natural 9150 Solid Rods natural 9150 Welding Rods natural 9150 DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Physiological safety in accordance with EU Physiological safety in accordance with FDA Approved for contact with food in accordance with LFGB and EC Regulation 1935/2004 Sheets PE-HWST Sheets, extruded, natural 9150 without protective foil Thckn x x x Catalogue Semi-Finished Parts

25 PE-HWST Sheets, pressed, natural 9150 without protective foil Thckn pressed 2000 x x x planed 2000 x x Solid Rods PE-HWST Solid Rods, natural 9150 Ø Weight 1000 kg/m PE-HWST Solid Rods, natural 9150 Ø Weight 1000 kg/m PE-HWST Solid Rods, natural 9150 Ø Ø inch 1/4 3/8 1/2 Weight kg/m Weight lb./ft Catalogue Semi-Finished Parts 25 25

26 PE-HWST Solid Rods, natural 9150 Ø Ø inch 5/8 3/4 7/ /8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/ /4 2 1/2 2 3/ /4 3 1/ / / / Weight kg/m Weight lb./ft Welding Rods PE-HWST Welding Rods, natural 9150 a/d 3.0 Length m/kg Rod 1 m Rod 2 m Coil Spool 2 kg Spool 10 kg Round (RD) m rods in 2 kg bags 2 m rods in 2 kg bags Catalogue Semi-Finished Parts

27 PE light blue Product range PE light blue Sheets extruded Welding Rods blue 340 blue 340 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Approval in accordance with DVGW regulations, Standard W 270 Meets the KTW (Plastics in Potable Water) recoendations of the Federal Institute of Risk Assessment (BfR, Germany) Sheets PE light blue Sheets, extruded, blue 340 without protective foil Thckn x x x Welding Rods PE light blue Welding Rods, blue 340 Round (RD) a/d Length m/kg Coil Spool 2 kg Catalogue Semi-Finished Parts 27 27

28 1.4 Product group PE-HWV Product types Standard stock item PE-HWV Product properties High heat stability Physiologically safe according to German Federal Institute for Risk Assessment (BfR) Very good thermoforming properties Particularly suited to applications in orthopaedic engineering Ideal for the production of orthoses and prostheses Highly cost-effective Standard stock item PE-HWV Key Product range: from page Areas of use Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C High heat stability, for thermoforming and orthopaedics sector 29 Orthopaedics to +80 Processing methods (for details, see key) 28 Catalogue Semi-Finished Parts

29 PE-HWV Product range PE-HWV Sheets extruded natural 9150 flesh-coloured 757 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Sheets PE-HWV Sheets, extruded, natural 9150 without protective foil Thckn x PE-HWV Sheets, extruded, flesh-coloured 757 without protective foil Thckn x Catalogue Semi-Finished Parts 29 29

30 1.5 Product group PE-W Product types Standard stock item PE-W Product properties Low-density polyethylene Physiologically safe according to German Federal Institute for Risk Assessment (BfR) and FDA Excellent processing characteristics Particularly suited to applications in orthopaedic engineering High flexibility High chemical resistance Standard stock item PE-W Key Product range: from page Areas of use Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Shore hardness D, DIN EN ISO 868 Temperature range, C Low-density polyethylene (PE-LD), natural 31 Orthopaedics to +80 Processing methods (for details, see key) 30 Catalogue Semi-Finished Parts

31 PE-W Product range PE-W Sheets extruded natural 9150 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Physiological safety in accordance with FDA Sheets PE-W Sheets, extruded, natural 9150 without protective foil Thckn x x Catalogue Semi-Finished Parts 31 31

32 1.6 Product group PE FOAM Product types Standard stock item PE FOAM Product properties Very easy to process Excellent surface quality (embossed) High flexural strength Low water absorption Easy to clean UV-resistant Printable after pretreatment Physiologically safe according to German Federal Institute for Risk Assessment (BfR) and FDA Standard stock item Key Product range: from page Areas of use Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Flexural modulus of elasticity, MPa, DIN EN ISO 178 Shore hardness D, DIN EN ISO 868 Temperature range, C PE FOAM Closed-cell, coextruded polyethylene foam, UV-stabilised, embossed surface made of compact material, white 33 Shipbuilding Partitions and arena boards Stadium construction to +80 Processing methods (for details, see key) 32 Catalogue Semi-Finished Parts

33 PE FOAM Product range PE FOAM Sheets extruded white 1180 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Physiological safety in accordance with FDA Sheets PE FOAM Sheets, extruded, white 1180 without protective foil foamed Thckn x x PE-FOAM sheets are charged per sq.m Catalogue Semi-Finished Parts 33 33

34 1.7 Product group PE-EL Product types Standard stock item Special types (For further details, please see page 55) PE-EL PE-EL-SK Product properties Electrically conductive Suitable for use in explosive atmospheres High chemical resistance UV-stabilised High corrosion resistance Very good processing properties Standard stock item Key Product range: from page Areas of use Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C PE-EL High heat stability, electrically conductive, black 35 Mobility Chemical Tank and Equipment Construction Power and Electrical Engineering Air-Conditioning and Ventilation Systems Mechanical Engineering to +80 Processing methods (for details, see key) 34 Catalogue Semi-Finished Parts

35 PE-EL Product range PE-EL Certificates Sheets extruded black 9500 Sheets pressed black 9500 Welding Rods black 9500 DIN 4102 B2 normal flaability (self-assessment without test certificate) Sheets PE-EL Sheets, extruded, black 9500 protective foil one side Thckn x x For more information about explosion protection, please consult our official position paper relating to EU Directive 94/9/EC (ATEX 100a/ATEX 95). If you have any further questions, please feel free to contact our Technical Service Centre. PE-EL Sheets, pressed, black 9500 without protective foil pressed Thckn x x For more information about explosion protection, please consult our official position paper relating to EU Directive 94/9/EC (ATEX 100a/ATEX 95). If you have any further questions, please feel free to contact our Technical Service Centre Catalogue Semi-Finished Parts 35 35

36 PE-EL Sheets, pressed, black 9500 without protective foil pressed Thckn x x For more information about explosion protection, please consult our official position paper relating to EU Directive 94/9/EC (ATEX 100a/ATEX 95). If you have any further questions, please feel free to contact our Technical Service Centre. Welding Rods PE-EL Welding Rods, black 9500 Round (RD) a/d Length m/kg Rod 1 m Rod 2 m Coil Spool 2 kg m rods in 2 kg bags 2 m rods in 2 kg bags For more information about explosion protection, please consult our official position paper relating to EU Directive 94/9/EC (ATEX 100a/ATEX 95). If you have any further questions, please feel free to contact our Technical Service Centre. 36 Catalogue Semi-Finished Parts

37 1.8 Product group PE-HML 500 Product types Standard stock item Special types (For further details, please see page 55) PE-HML 500 PE-HML 500 UV Product properties High molecular weight High abrasion resistance Physiologically safe for use in contact with food Temperature range from -100 C to +80 C High impact strength Anti-adhesive Standard stock item Key Product range: from page Areas of use Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Impact strength (double notch), kj/m², DIN EN ISO Shore hardness D, DIN EN ISO 868 Temperature range, C PE-HML 500 High molecular weight, high impact strength and abrasion resistance, extruded 38 Chemical Tank and Equipment Construction Power and Electrical Engineering Food Industry Mechanical Engineering Transport, Materials Handling and Storage Systems to +80 Processing methods (for details, see key) 2013 Catalogue Semi-Finished Parts 37 37

38 PE-HML 500 Product range PE-HML 500 Sheets extruded Welding Rods natural 9150 natural 9150 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Physiological safety in accordance with EU Physiological safety in accordance with FDA Sheets PE-HML 500 Sheets, extruded, natural 9150 without protective foil Thckn x x Welding Rods PE-HML 500 Welding Rods, natural 9150 Round (RD) a/d Length m/kg Rod 1 m Rod 2 m Coil Spool 2 kg m rods in 2 kg bags 2 m rods in 2 kg bags 38 Catalogue Semi-Finished Parts

39 1.9 Product group dehoplast PE-500 Product types Standard stock item Special types (For further details, please see page 55) dehoplast PE-500 dehoplast PE-500 UV, dehoplast Food, dehoplast PE-500 antibac, dehoplast x-protect 500, dehoplast x-fric Product properties High molecular weight High abrasion resistance Physiologically safe for use in contact with food Temperature range from -100 C to +80 C High impact strength Anti-adhesive Standard stock item Key Product range: from page Areas of use Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Impact strength (double notch), kj/m², DIN EN ISO Shore hardness D, DIN EN ISO 868 Temperature range, C dehoplast PE-500 High molecular weight, high impact strength and abrasion resistance, natural, green and black 40 Printing, Paper and Textile Industry Chemical Tank and Equipment Construction Mechanical Engineering Transport, Materials Handling and Storage Systems Packing and Filling Machines to +80 Processing methods (for details, see key) 2013 Catalogue Semi-Finished Parts 39 39

40 dehoplast PE-500 Product range dehoplast PE-500 Sheets pressed natural 9150 black 9500 green 9700 Solid Rods natural 9150 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Physiological safety in accordance with EU Physiological safety in accordance with FDA Sheets dehoplast PE-500 Sheets, pressed, natural 9150 without protective foil planed Thckn x x x Catalogue Semi-Finished Parts

41 dehoplast PE-500 Sheets, pressed, black 9500 without protective foil planed Thckn x x x dehoplast PE-500 Sheets, pressed, green 9700 without protective foil planed Thckn x x x Catalogue Semi-Finished Parts 41 41

42 Solid Rods dehoplast PE-500 Solid Rods, natural 9150 Ø Weight kg/m dehoplast PE-500 Solid Rods, natural 9150 Ø Weight kg/m Catalogue Semi-Finished Parts

43 1.10 Product group dehoplast PE-1000 Product types Standard stock item Special types (For further details, please see page 55) dehoplast PE-1000, dehoplast PE-1000 AST dehoplast PE-1000 UV, dehoplast PE-1000 antibac, dehoplast PE-1000 EL, dehoplast PE-1000 MGK, dehoplast PE-1000 HT, dehoplast x-detect, dehoplast x-protect 1000, dehoplast x-glide, dehoplast x-oil, dehoplast super G, dehoplast x-ray, dehoplast superlining, dehoplast superlining-x, dehoplast superlining-xtra Product properties Ultra-high molecular weight High wear resistance Very high abrasion resistance Very high impact strength Standard stock item Key Product range: from page dehoplast PE-1000 Ultra-high molecular weight, high impact strength and wear resistance, natural, green and black 44 dehoplast PE-1000 AST Ultra-high molecular weight, high impact strength and wear resistance, antistatic, black 48 Areas of use Port and Marine Fender Industry Transport, Materials Handling and Mechanical Engineering Storage Systems Transport, Materials Handling and Mechanical Engineering Storage Systems Packing and Filling Machines Packing and Filling Machines Bulk Materials Industry Bulk Materials Industry Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Impact strength (double notch), kj/m², DIN EN ISO Shore hardness D, DIN EN ISO 868 Temperature range, C Processing methods (for details, see key) to to Catalogue Semi-Finished Parts 43 43

44 dehoplast PE-1000 Product range dehoplast PE-1000 Certificates DIN 4102 B2 normal flaability Sheets pressed Solid Rods natural 9150 natural 9150 (self-assessment without test flesh-coloured 5940 black 9500 certificate) black 9500 green 9700 green 9700 grey 9300 Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Physiological safety in accordance with EU Physiological safety in accordance with FDA Sheets dehoplast PE-1000 Sheets, pressed, natural 9150 without protective foil planed Thckn x x x sliced 1920 x Catalogue Semi-Finished Parts

45 dehoplast PE-1000 Sheets, pressed, natural 9150 without protective foil planed Thckn x x kg/piece 4120 x 2010 sliced 1920 x 940 dehoplast PE-1000 Sheets, pressed, flesh-coloured 5940 without protective foil sliced Thckn x dehoplast PE-1000 Sheets, pressed, black 9500 without protective foil planed Thckn x x x sliced 1920 x dehoplast PE-1000 Sheets, pressed, green 9700 without protective foil planed Thckn x x kg/piece 4120 x 2010 sliced 1920 x Catalogue Semi-Finished Parts 45 45

46 dehoplast PE-1000 Sheets, pressed, green 9700 without protective foil planed Thckn x x x sliced 1920 x Solid Rods dehoplast PE-1000 Solid Rods, natural 9150 Ø Weight kg/m dehoplast PE-1000 Solid Rods, black 9500 Ø Weight kg/m Catalogue Semi-Finished Parts

47 dehoplast PE-1000 Solid Rods, black 9500 Ø Weight kg/m dehoplast PE-1000 Solid Rods, green 9700 Ø Weight kg/m dehoplast PE-1000 Solid Rods, grey 9300 Ø Weight 1000 kg/m Catalogue Semi-Finished Parts 47 47

48 dehoplast PE-1000 AST Product range dehoplast PE-1000 AST Sheets pressed Solid Rods black 9500 black 9500 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Sheets dehoplast PE-1000 AST Sheets, pressed, black 9500 without protective foil planed Thckn x Solid Rods dehoplast PE-1000 AST Solid Rods, black 9500 Ø Weight kg/m Catalogue Semi-Finished Parts

49 dehoplast PE-1000 AST Solid Rods, black 9500 Ø Weight kg/m Catalogue Semi-Finished Parts 49 49

50 1.11 Product group PE regrind versions Product types Standard stock item Special types (For further details, please see page 55) dehoplast PE-55, dehoplast PE-73, dehoplast PE-46 dehoplast PE-FQ, SIMREC-PE 300 Product properties With regrind For a wide range of applications Excellent wear and abrasion resistance Highly cost-effective Standard stock item dehoplast PE-55 dehoplast PE-73 dehoplast PE-46 Key Product range: from page Ultra-high molecular weight, with regrind, green and black 51 High molecular weight, with regrind, green and black 53 PE with regrind, multicoloured 54 Areas of use Port and Marine Fender Industry Port and Marine Fender Industry Port and Marine Fender Industry Mechanical Engineering Mechanical Engineering Mechanical Engineering Transport, Materials Handling and Transport, Materials Handling and Transport, Materials Handling and Storage Systems Storage Systems Storage Systems Packing and Filling Machines Packing and Filling Machines Packing and Filling Machines Bulk Materials Industry Bulk Materials Industry Bulk Materials Industry Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Shore hardness D, DIN EN ISO 868 Temperature range, C to to to +80 Processing methods (for details, see key) 50 Catalogue Semi-Finished Parts

51 dehoplast PE-55 Product range dehoplast PE-55 Sheets pressed black 9500 green 9700 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Sheets dehoplast PE-55 Sheets, pressed, black 9500 without protective foil planed Thckn x x x dehoplast PE-55 Sheets, pressed, green 9700 without protective foil planed Thckn x x x Catalogue Semi-Finished Parts 51 51

52 dehoplast PE-55 Sheets, pressed, green 9700 without protective foil planed Thckn x x kg/piece 4120 x Catalogue Semi-Finished Parts

53 dehoplast PE-73 Product range dehoplast PE-73 Sheets pressed black 9500 green 9700 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Sheets dehoplast PE-73 Sheets, pressed, black 9500 without protective foil planed Thckn x x x dehoplast PE-73 Sheets, pressed, green 9700 without protective foil planed Thckn x x x Catalogue Semi-Finished Parts 53 53

54 dehoplast PE-46 Product range dehoplast PE-46 Sheets pressed multicoloured 9810 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Sheets dehoplast PE-46 Sheets, pressed, multicoloured 9810 without protective foil planed Thckn x Catalogue Semi-Finished Parts

55 1.12 Special PE products Available upon request PE PE-HWU-GK PE-HWU-B PE 100 RC PE-UV PE-AS PE-TF PE embossed PE-FL PE-EL-SK PE-HML 500 UV dehoplast PE-500 UV dehoplast Food dehoplast PE-500 antibac dehoplast x-protect 500 dehoplast x-fric dehoplast PE-1000 UV dehoplast PE-1000 antibac dehoplast PE-1000 EL dehoplast PE-1000 MGK dehoplast PE-1000 HT dehoplast x-detect dehoplast x-protect 1000 dehoplast x-glide dehoplast x-oil dehoplast super G dehoplast x-ray dehoplast superlining dehoplast superlining-x dehoplast superlining-xtra dehoplast PE-FQ SIMREC-PE 300 Key High heat stability, UV-stabilised, glass-fibre-backed, black High heat stability, UV-stabilised, DIBt-approved for tanks requiring mandatory test certificates (PE 80), black High-heat stability, increased resistance to slow crack growth, UV-stabilised, creep strength at 50 years, 20 C, medium water = 10.0 MPa, black High heat stability, UV-stabilised, natural and coloured High heat stability, antistatic, natural and coloured Excellent thermoforming properties High heat stability, with embossed surface on one side High heat stability, flame retardant High heat stability, electrically conductive, polyester-backed, black High molecular weight, high impact strength and abrasion resistance, UV-stabilised, extruded High molecular weight, high impact strength and abrasion resistance, UV-stabilised, pressed Cutting boards, physiologically safe, colours in accordance with the European Food Regulation (HACCP) High molecular weight, high impact strength and abrasion resistance, antibacterial properties High molecular weight, with boron additive for neutron absorption PE blend, optimised combination of sliding friction properties, rigidity and temperature resistance Ultra-high molecular weight, UV-stabilised Ultra-high molecular weight, high impact strength and wear resistance, mean molar mass > 3 million g/mol, antibacterial properties Ultra-high molecular weight, electrically conductive Ultra-high molecular weight, filled with microglass, enhanced surface hardness Ultra-high molecular weight, heat and oxidation stability Ultra-high molecular weight, detectable with metal detectors Ultra-high molecular weight, with boron additive for neutron absorption Ultra-high molecular weight, reduced level of sliding friction Ultra-high molecular weight, reduced level of sliding friction with lubrication of counterparts Ultra-high molecular weight, optimised sliding friction properties in relation to other plastics Ultra-high molecular weight, X-ray detectable Ultra-high molecular weight, mean molar mass > 9 million g/mol, high wear resistance, very good tribological properties Ultra-high molecular weight, mean molar mass > 10.5 million g/mol, increased wear resistance, high abrasion resistance Ultra-high molecular weight, mean molar mass > 9 million g/mol, superior wear resistance, superior surface hardness High molecular weight, with regrind, special version for marine fender design, black PE with regrind, black 2013 Catalogue Semi-Finished Parts 55 55

56 2 PP 56 Catalogue Semi-Finished Parts

57 PP 2.1 Product group PP-DWU Product group PP-DWST Product group PP-EL Product group PP white Product group PPs Product group PP-DWV Product group PP FOAM Product group PP-C Product group PP-R Product group frisylen Special PP products Catalogue Semi-Finished Parts 57 57

58 2.1 Product group PP-DWU Product types Standard stock item Special types (For further details, please see page 99) PP-DWU AlphaPlus, PP-DWU-SK AlphaPlus PP-DWU-GK AlphaPlus, PP-DWU-B Product properties Permanent-heat stability High chemical resistance Excellent for use in chemical tank and equipment construction Alpha-nucleated Good long-term properties when exposed to a range of media High rigidity in upper temperature range Standard stock item Key Product range: from page Areas of use Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C PP-DWU AlphaPlus Homopolymer, alpha-nucleated, permanent-heat stability, from DIBt-approved compound, grey 59 Chemical Tank and Equipment Construction Power and Electrical Engineering Printing, Paper and Textile Industry Mechanical Engineering Mobility to +100 PP-DWU-SK AlphaPlus Homopolymer, alpha-nucleated, permanent-heat stability, from DIBt-approved compound, polyester-backed, grey 62 Lining and Composite Construction Environmental technology to +100 Processing methods (for details, see key) 58 Catalogue Semi-Finished Parts

59 PP-DWU AlphaPlus Product range PP-DWU AlphaPlus Certificates Sheets extruded grey 9300 Sheets pressed grey 9300 Solid Rods grey 9300 Twin-Wall Sheets grey 9300 DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance HKP Corner Elements grey 9300 Welding Rods grey 9300 with BfR (German Federal Institute for risk valuation) Physiological safety in accordance with EU Physiological safety in accordance with FDA General DIBt approval (German Institute of Building Technology approval for tanks requiring mandatory test certificates) Sheets PP-DWU AlphaPlus Sheets, extruded, grey 9300 without protective foil protective foil one side Thckn x x x x Catalogue Semi-Finished Parts 59 59

60 PP-DWU AlphaPlus Sheets, pressed, grey 9300 without protective foil Thckn pressed 2000 x x x planed 2000 x x Solid Rods PP-DWU AlphaPlus Solid Rods, grey 9300 Ø Weight kg/m PP-DWU AlphaPlus Solid Rods, grey 9300 Ø Weight kg/m Catalogue Semi-Finished Parts

61 Twin-Wall Sheets PP-DWU AlphaPlus Twin-Wall Sheets, grey 9300 Total thickness Thickness outer skins Web spacing x HKP Corner Elements PP-DWU AlphaPlus HKP Corner Elements, grey 9300 Angle Length Leg length Total thickness Thickness outer skins Web spacing Welding Rods PP-DWU AlphaPlus Welding Rods, grey 9300 a/d b Length Rod 1 m Rod 2 m Coil Spool 2 kg Spool 10 kg m/kg Round (RD) Triangular (TA 90) Triangular (TA 80) Three-core (TL) Special profile oval Two-core (ZW) m rods in 2 kg bags 2 m rods in 2 kg bags 2013 Catalogue Semi-Finished Parts 61 61

62 PP-DWU-SK AlphaPlus Product range PP-DWU-SK AlphaPlus Sheets extruded grey 9300 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) General DIBt approval (German Institute of Building Technology approval for tanks requiring mandatory test certificates) Sheets PP-DWU-SK AlphaPlus Sheets, extruded, grey 9300 without protective foil backed Thckn x x x Nominal thickness equals residual wall thickness. Recoended minimum wall thickness for liner sheets: Catalogue Semi-Finished Parts

63 2.2 Product group PP-DWST Product types Standard stock item Special types (For further details, please see page 99) PP-DWST PP-DW-CU, PP-UV, PP-AS, PP-DWVL, PP-TV, PP-TE, PP embossed Product properties Permanent-heat stability High chemical resistance Good long-term properties when exposed to a range of media Very good processing characteristics High corrosion resistance High rigidity in upper temperature range Standard stock item Key Product range: from page Areas of use Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C PP-DWST Homopolymer, permanent-heat stability, natural 64 Chemical Tank and Equipment Construction Power and Electrical Engineering Printing, Paper and Textile Industry Mobility Orthopaedics to +100 Processing methods (for details, see key) 2013 Catalogue Semi-Finished Parts 63 63

64 PP-DWST Product range PP-DWST Certificates Sheets extruded natural 9150 Sheets pressed natural 9150 Solid Rods natural 9150 Welding Rods natural 9150 DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Physiological safety in accordance with EU Physiological safety in accordance with FDA Approved for contact with food in accordance with LFGB and EC Regulation 1935/2004 Sheets PP-DWST Sheets, extruded, natural 9150 without protective foil Thckn x x x Catalogue Semi-Finished Parts

65 PP-DWST Sheets, pressed, natural 9150 without protective foil Thckn pressed 2000 x x x planed 2000 x x Solid Rods PP-DWST Solid Rods, natural 9150 PP-DWST Solid Rods, natural 9150 Ø Weight 2000 Ø Weight kg/m kg/m Catalogue Semi-Finished Parts 65 65

66 PP-DWST Solid Rods, natural 9150 Ø Ø inch 1/4 3/8 1/2 5/8 3/4 7/ /8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/ /4 2 1/2 2 3/ /4 3 1/ / / / Weight kg/m Weight lb./ft Welding Rods PP-DWST Welding Rods, natural 9150 a/d b Length Rod 1 m Rod 2 m Coil Spool 2 kg m/kg Round (RD) Triangular (TA 90) Triangular (TA 80) m rods in 2 kg bags 2 m rods in 2 kg bags 66 Catalogue Semi-Finished Parts

67 2.3 Product group PP-EL Product types Standard stock item Special types (For further details, please see page 99) PP-EL-S, PP-EL PP-EL-SK, PP-EL-GK Product properties Electrically conductive Suitable for use in explosive atmosphere High chemical resistance Permanent-heat resistance High corrosion resistance Very good processing properties Standard stock item Key Product range: from page PP-EL-S Random copolymer, electrically conductive, flame-retardant 68 PP-EL Homopolymer, electrically conductive 70 Areas of use Chemical Tank and Equipment Chemical Tank and Equipment Construction Construction Power and Electrical Engineering Power and Electrical Engineering Air-Conditioning and Ventilation Air-Conditioning and Ventilation Systems Systems Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C Processing methods (for details, see key) to to Catalogue Semi-Finished Parts 67 67

68 PP-EL-S Product range PP-EL-S Sheets extruded Sheets pressed black 9500 black 9500 Welding Rods black 9500 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) UL 94 V-0 up from 4 Sheets PP-EL-S Sheets, extruded, black 9500 protective foil one side Thckn x For more information about explosion protection, please consult our official position paper relating to EU Directive 94/9/EC (ATEX 100a/ATEX 95). If you have any further questions, please feel free to contact our Technical Service Centre. PP-EL-S Sheets, pressed, black 9500 without protective foil pressed Thckn x x x For more information about explosion protection, please consult our official position paper relating to EU Directive 94/9/EC (ATEX 100a/ATEX 95). If you have any further questions, please feel free to contact our Technical Service Centre. 68 Catalogue Semi-Finished Parts

69 PP-EL-S Sheets, pressed, black 9500 without protective foil pressed Thckn x x x For more information about explosion protection, please consult our official position paper relating to EU Directive 94/9/EC (ATEX 100a/ATEX 95). If you have any further questions, please feel free to contact our Technical Service Centre. Welding Rods PP-EL-S Welding Rods, black 9500 Round (RD) a/d Length m/kg Rod 1 m Rod 2 m Coil Spool 2 kg m rods in 2 kg bags 2 m rods in 2 kg bags For more information about explosion protection, please consult our official position paper relating to EU Directive 94/9/EC (ATEX 100a/ATEX 95). If you have any further questions, please feel free to contact our Technical Service Centre Catalogue Semi-Finished Parts 69 69

70 PP-EL Product range PP-EL Certificates Sheets extruded black 9500 Sheets pressed black 9500 Welding Rods black 9500 DIN 4102 B2 normal flaability (self-assessment without test certificate) Sheets PP-EL Sheets, extruded, black 9500 without protective foil Thckn x For more information about explosion protection, please consult our official position paper relating to EU Directive 94/9/EC (ATEX 100a/ATEX 95). If you have any further questions, please feel free to contact our Technical Service Centre. PP-EL Sheets, pressed, black 9500 without protective foil pressed Thckn x x x For more information about explosion protection, please consult our official position paper relating to EU Directive 94/9/EC (ATEX 100a/ATEX 95). If you have any further questions, please feel free to contact our Technical Service Centre. 70 Catalogue Semi-Finished Parts

71 PP-EL Sheets, pressed, black 9500 without protective foil pressed Thckn x x x For more information about explosion protection, please consult our official position paper relating to EU Directive 94/9/EC (ATEX 100a/ATEX 95). If you have any further questions, please feel free to contact our Technical Service Centre. Welding Rods PP-EL Welding Rods, black 9500 Round (RD) a/d 4.0 Coil For more information about explosion protection, please consult our official position paper relating to EU Directive 94/9/EC (ATEX 100a/ATEX 95). If you have any further questions, please feel free to contact our Technical Service Centre Catalogue Semi-Finished Parts 71 71

72 2.4 Product group PP white Product types Standard stock item Special types (For further details, please see page 99) PP white 9002 PP white 826 Product properties Permanent-heat stability High chemical resistance Particularly suited for high-quality interior design applications Wide range of applications High corrosion resistance High rigidity in upper temperature range Standard stock item Key Product range: from page Areas of use Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C PP white 9002 Homopolymer, white 73 Chemical Tank and Equipment Construction Laboratory Engineering Food Industry Mechanical Engineering Semiconductor Industry to +100 Processing methods (for details, see key) 72 Catalogue Semi-Finished Parts

73 PP white 9002 Product range PP white 9002 Sheets extruded Welding Rods white 9002 white 9002 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Sheets PP Sheets, extruded, white 9002 protective foil both sides Thckn x x x x Welding Rods PP Welding Rods, white 9002 Round (RD) a/d b - - Length m/kg Rod 2 m Coil Spool 2 kg m rods in 2 kg bags 2013 Catalogue Semi-Finished Parts 73 73

74 PP Welding Rods, white 9002 a/d b Length Rod 2 m Coil m/kg Triangular (TA 90) Spool 2 kg Triangular (TA 80) m rods in 2 kg bags 74 Catalogue Semi-Finished Parts

75 2.5 Product group PPs Product types Standard stock item PPs Product properties Low flaability in accordance with DIN 4102 B1 High chemical resistance Electrical insulating properties Long service life High temperature resistance Ideally suited to HVAC applications Standard stock item Key Product range: from page Areas of use Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C PPs Homopolymer, low flaability 76 Chemical Tank and Equipment Construction Power and Electrical Engineering Air-Conditioning and Ventilation Systems Mechanical Engineering Mobility to +100 Processing methods (for details, see key) 2013 Catalogue Semi-Finished Parts 75 75

76 PPs Product range PPs Certificates Sheets extruded white 9002 grey 9300 Sheets pressed grey 9300 Twin-Wall Sheets grey 9300 Welding Rods white 9002 grey 9300 DIN 4102 B1 low flaability 2 to 20, general test certificate issued by an approved building inspectorate (Germany) Sheets PPs Sheets, extruded, white 9002 protective foil both sides Thckn x x x PPs Sheets, extruded, grey 9300 without protective foil Thckn x x x Catalogue Semi-Finished Parts

77 PPs Sheets, extruded, grey 9300 without protective foil Thckn x x x PPs Sheets, pressed, grey 9300 without protective foil pressed Thckn x x x Twin-Wall Sheets PPs Twin-Wall Sheets, grey 9300 Total thickness Thickness outer skins Web spacing x Welding Rods PPs Welding Rods, white 9002 Round (RD) a/d Length m/kg Rod 1 m Rod 2 m Coil Spool 2 kg m rods in 2 kg bags 2 m rods in 2 kg bags 2013 Catalogue Semi-Finished Parts 77 77

78 PPs Welding Rods, grey 9300 a/d b Length Rod 1 m Rod 2 m Coil m/kg Round (RD) Triangular (TA 90) Spool 2 kg Three-core (TL) m rods in 2 kg bags 2 m rods in 2 kg bags 78 Catalogue Semi-Finished Parts

79 2.6 Product group PP-DWV Product types Standard stock item PP-DWV Product properties High heat stability Physiologically safe according to German Federal Institute for Risk Assessment (BfR) and FDA Very good thermoforming properties Particularly suited to applications in orthopaedic engineering Ideal for the production of orthoses and prostheses Highly cost-effective Standard stock item PP-DWV Key Product range: from page Areas of use Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C Homopolymer, for thermoforming and orthopaedics sector 80 Orthopaedics to +100 Processing methods (for details, see key) 2013 Catalogue Semi-Finished Parts 79 79

80 PP-DWV Product range PP-DWV Sheets extruded natural 9150 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Physiological safety in accordance with FDA Sheets PP-DWV Sheets, extruded, natural 9150 without protective foil Thckn x Catalogue Semi-Finished Parts

81 2.7 Product group PP FOAM Product types Standard stock item PP FOAM Product properties Very easy to process Excellent surface quality Low water absorption Easy to clean High flexural strength Physiologically safe according to German Federal Institute for Risk Assessment (BfR) Standard stock item Key Product range: from page Areas of use Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Flexural modulus of elasticity, MPa, DIN EN ISO 178 Shore hardness D, DIN EN ISO 868 Temperature range, C PP FOAM Closed-cell, coextruded polypropylene foam, smooth surface made of compact material, light grey 82 Chemical Tank and Equipment Construction Small sewage treatment plants Tank covers Encasements to +100 Processing methods (for details, see key) 2013 Catalogue Semi-Finished Parts 81 81

82 PP FOAM Product range PP FOAM Sheets extruded grey 1472 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Sheets PP FOAM Sheets, extruded, grey 1472 Thckn without protective foil foamed 2000 x Outer skin PP FOAM in grey PE-FOAM sheets are charged per sq.m x Catalogue Semi-Finished Parts

83 2.8 Product group PP-C Product types Standard stock item Special types (For further details, please see page 99) PP-C, PP-C-PK, PP-C-SK, PP-C-UV, PP-C-UV embossed PP-C-GK, PP-C-AS Product properties Block copolymer Superior impact strength even at low temperatures Excellent chemical resistance Lower susceptibility to stress cracks Temperature range from -20 C to +80 C Extremely versatile Standard stock item PP-C PP-C-PK PP-C-SK PP-C-UV PP-C-UV embossed Key Product range: from page Block copolymer 84 Block copolymer, polypropylene-backed 87 Block copolymer, polyester-backed 88 Block copolymer, UV-stabilised 89 Block copolymer, UV-stabilised, embossed 91 Areas of use Chemical Tank and Equipment Construction Mobility Pharmaceuticals & Bioindustry Orthopaedics Lining and Chemical Tank and Composite Equipment Construction Construction Environmental Power and technology Electrical Engineering Lining and Composite Construction Power and Electrical Engineering Air-Conditioning and Ventilation Systems Mechanical Engineering Environmental technology Chemical Tank and Equipment Construction Power and Electrical Engineering Air-Conditioning and Ventilation Systems Mechanical Engineering Air-Conditioning and Ventilation Systems Mechanical Engineering Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C to to to to to +80 Processing methods (for details, see key) 2013 Catalogue Semi-Finished Parts 83 83

84 PP-C Product range PP-C Certificates DIN 4102 B2 normal flaability Sheets extruded Sheets pressed Welding Rods natural 9150 natural 9150 natural 9150 (self-assessment without test white 662 grey 9300 grey 9300 black 9500 certificate) grey 9300 Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Physiological safety in accordance with FDA Sheets PP-C Sheets, extruded, natural 9150 protective foil one side Thckn x x PP-C Sheets, extruded, white 662 protective foil one side Thckn x x Catalogue Semi-Finished Parts

85 PP-C Sheets, extruded, black 9500 protective foil one side Thckn x x PP-C Sheets, extruded, grey 9300 protective foil one side Thckn x x PP-C Sheets, pressed, natural 9150 without protective foil pressed Thckn x x x PP-C Sheets, pressed, grey 9300 without protective foil pressed Thckn x x kg/piece 6200 x Catalogue Semi-Finished Parts 85 85

86 PP-C Sheets, pressed, grey 9300 without protective foil pressed Thckn x x x Welding Rods PP-C Welding Rods, natural 9150 Round (RD) a/d Length m/kg Rod 1 m Coil m rods in 2 kg bags PP-C Welding Rods, grey 9300 a/d b Length Rod 1 m Rod 2 m Coil Spool 2 kg Spool 10 kg m/kg Round (RD) Triangular (TA 90) Triangular (TA 80) Three-core (TL) m rods in 2 kg bags 2 m rods in 2 kg bags 86 Catalogue Semi-Finished Parts

87 PP-C-PK Product range PP-C-PK Sheets extruded grey 9300 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Sheets PP-C-PK Sheets, extruded, grey 9300 without protective foil backed Thckn x x Nominal thickness equals residual wall thickness Catalogue Semi-Finished Parts 87 87

88 PP-C-SK Product range PP-C-SK Sheets extruded grey 9300 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Sheets PP-C-SK Sheets, extruded, grey 9300 without protective foil backed Thckn x Nominal thickness equals residual wall thickness. 88 Catalogue Semi-Finished Parts

89 PP-C-UV Product range PP-C-UV Sheets extruded light blue 924 light blue 992 blue 798 Welding Rods light blue 924 light blue 992 blue 798 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Sheets PP-C-UV Sheets, extruded, light blue 924 protective foil one side Thckn x PP-C-UV Sheets, extruded, light blue 992 protective foil one side Thckn x PP-C-UV Sheets, extruded, blue 798 protective foil one side Thckn x Catalogue Semi-Finished Parts 89 89

90 Welding Rods PP-C-UV Welding Rods, light blue 924 a/d b Length Rod 1 m Rod 2 m Coil m/kg Round (RD) Triangular (TA 90) Triangular (TA 80) m rods in 2 kg bags 2 m rods in 2 kg bags PP-C-UV Welding Rods, light blue 992 a/d b Length Rod 1 m Rod 2 m Coil m/kg Round (RD) Triangular (TA 90) Triangular (TA 80) m rods in 2 kg bags 2 m rods in 2 kg bags PP-C-UV Welding Rods, blue 798 a/d b Length Rod 1 m Rod 2 m Coil m/kg Round (RD) Triangular (TA 90) Triangular (TA 80) m rods in 2 kg bags 2 m rods in 2 kg bags 90 Catalogue Semi-Finished Parts

91 PP-C-UV embossed Product range PP-C-UV embossed Sheets extruded blue 798 blue 924 blue 992 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Sheets PP-C-UV Sheets, extruded, blue 798 protective foil one side embossed Thckn x PP-C-UV Sheets, extruded, blue 924 protective foil one side embossed Thckn x PP-C-UV Sheets, extruded, blue 992 protective foil one side embossed Thckn x Catalogue Semi-Finished Parts 91 91

92 2.9 Product group PP-R Product types Standard stock item PP-R Product properties Random copolymer Good processing capability High impact strength even at low temperatures Excellent chemical resistance High flexibility Extremely versatile Standard stock item Key Product range: from page Areas of use Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C PP-R Random copolymer 93 Chemical Tank and Equipment Construction Power and Electrical Engineering Laboratory Engineering Air-Conditioning and Ventilation Systems Mechanical Engineering to +80 Processing methods (for details, see key) 92 Catalogue Semi-Finished Parts

93 PP-R Product range PP-R Sheets extruded grey 9300 Welding Rods grey 9300 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Sheets PP-R Sheets, extruded, grey 9300 without protective foil Thckn x Welding Rods PP-R Welding Rods, grey 9300 Round (RD) a/d Length m/kg Rod 1 m Rod 2 m Coil Spool 2 kg Spool 10 kg m rods in 2 kg bags 2 m rods in 2 kg bags 2013 Catalogue Semi-Finished Parts 93 93

94 2.10 Product group frisylen Product types Standard stock item Special types (For further details, please see page 99) frisylen JN 480, frisylen SP, frisylen BNL, frisylen XL 75 frisylen JN 480 E, frisylen M 33 Product properties Cutting boards for industrial applications Available in different degrees of hardness Neat cuts Extremely versatile Available in various colours Highly cost-effective Standard stock item frisylen JN 480 frisylen SP frisylen BNL frisylen XL 75 Key Product range: from page Cutting boards, reversible boards with smooth surfaces, natural 95 Cutting boards, reversible boards with smooth surfaces, green 96 Cutting boards, reversible boards with smooth surfaces, red-brown 97 Cutting boards, reversible boards with smooth surfaces, multicoloured 98 Areas of use Leather industry Printing, Paper and Textile Industry Leather industry Printing, Paper and Textile Industry Leather industry Printing, Paper and Textile Industry Leather industry Printing, Paper and Textile Industry Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C to to to to +80 Processing methods (for details, see key) 94 Catalogue Semi-Finished Parts

95 frisylen JN 480 Product range frisylen JN 480 Sheets pressed natural 9150 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Physiological safety in accordance with FDA Sheets frisylen JN 480 Sheets, pressed, natural 9150 without protective foil planed Thckn. 900 x x x x Catalogue Semi-Finished Parts 95 95

96 frisylen SP Product range frisylen SP Sheets pressed green 9700 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Sheets frisylen SP Sheets, pressed, green 9700 without protective foil planed Thckn. 900 x x x x Catalogue Semi-Finished Parts

97 frisylen BNL Product range frisylen BNL Sheets pressed red brown 9920 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Sheets frisylen BNL Sheets, pressed, red brown 9920 without protective foil planed Thckn. 900 x x x x Catalogue Semi-Finished Parts 97 97

98 frisylen XL 75 Product range frisylen XL 75 Sheets pressed multicoloured 9810 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Sheets frisylen XL 75 Sheets, pressed, multicoloured 9810 without protective foil planed Thckn. 900 x x x x Catalogue Semi-Finished Parts

99 2.11 Special PP products Available upon request PP PP-DWU-GK AlphaPlus PP-DWU-B PP-DW-CU PP-UV PP-AS PP-DWVL PP-TV PP-TE PP embossed PP-EL-SK PP-EL-GK PP white 826 PP-C-GK PP-C-AS frisylen JN 480 E frisylen M 33 Key Homopolymer, alpha-nucleated, permanent-heat stability, glass-fibre-backed, grey Homopolymer, permanent-heat stability, DIBt-approved for tanks requiring mandatory test certificates, grey Homopolymer, stabilised to protect against the influence of copper Homopolymer, permanent-heat stability, UV-stabilised, natural and coloured Homopolymer, permanent-heat stability, antistatic, white Homopolymer, with alkali resistance Homopolymer, with talc reinforcement Homopolymer, for use in the electrical industry Homopolymer, with embossed surface on one side Homopolymer, electrically conductive, polyester-backed Homopolymer, electrically conductive, glass-fibre-backed Homopolymer, white Block copolymer, glass-fibre-backed Block copolymer, antistatic Cutting boards, reversible boards with smooth surfaces, extruded, natural Cutting boards, reversible boards with smooth surfaces, grey 2013 Catalogue Semi-Finished Parts 99 99

100 3 PVC rigid 100 Catalogue Semi-Finished Parts

101 3.1 Product group PVC-CAW Product group PVC-MZ Product group PVC-GLAS 118 PVC rigid 3.4 Product group PVC-C Product group PVC-KYRNIT Special PVC rigid products Catalogue Semi-Finished Parts

102 3.1 Product group PVC-CAW Product types Standard stock item Special types (For further details, please see page 128) PVC-CAW, SIMOSHIELD PVC-CAW-UV, PVC-T matt, PVC-LZ, PVC-WT, PVC embossed Product properties Proven material made of PVC-U Proven track record in tank and chemical equipment construction Chemical resistance High rigidity UV-stabilised and weather resistant (PVC-CAW-UV) Extensive standard range of products Standard stock item Key Product range: from page Areas of use Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C PVC-CAW Rigid PVC, normal impact strength, chemical resistance 103 Chemical Tank and Equipment Construction Lining and Composite Construction Air-Conditioning and Ventilation Systems to +60 SIMOSHIELD Rigid PVC, with woodgrain foil, specially for door fabrication 112 Door Panels to +60 Processing methods (for details, see key) 102 Catalogue Semi-Finished Parts

103 PVC-CAW Product range PVC-CAW Sheets extruded dark grey 9350 light grey 9310 swiss grey 9320 white 9002 ivory 9400 black 9500 red 9900 Solid Rods dark grey 9350 swiss grey 9320 white 9002 ivory 9400 black 9500 red 9900 Welding Rods dark grey 9350 light grey 9310 swiss grey 9320 white 9002 ivory 9400 red 9900 Certificates DIN 4102 B1 low flaability 1 to 4, general test certificate issued by an approved building inspectorate (Germany) UL 94 V-0 up from 1 NF P M1 from 1 to 3 BS 476 class 1 for 3 Sheets PVC-CAW Sheets, extruded, dark grey 9350 without protective foil Thckn x x x PVC-CAW Sheets, extruded, light grey 9310 without protective foil Thckn x x x Catalogue Semi-Finished Parts

104 PVC-CAW Sheets, extruded, light grey 9310 without protective foil Thckn x x x PVC-CAW Sheets, extruded, swiss grey 9320 without protective foil Thckn x x PVC-CAW Sheets, extruded, white 9002 protective foil one side protective foil both sides Thckn x x x Catalogue Semi-Finished Parts

105 PVC-CAW Sheets, extruded, white 9002 protective foil one side protective foil both sides Thckn x x x PVC-CAW Sheets, extruded, ivory 9400 without protective foil Thckn x x PVC-CAW Sheets, extruded, black 9500 protective foil one side protective foil both sides Thckn x x x Catalogue Semi-Finished Parts

106 PVC-CAW Sheets, extruded, black 9500 protective foil one side protective foil both sides Thckn x x kg/piece 3000 x 1500 PVC-CAW Sheets, extruded, red 9900 without protective foil Thckn x x Solid Rods PVC-CAW Solid Rods, dark grey 9350 PVC-CAW Solid Rods, dark grey 9350 Ø Weight 2000 Ø Weight kg/m kg/m Catalogue Semi-Finished Parts

107 PVC-CAW Solid Rods, dark grey 9350 Ø Ø Weight Weight 1525 inch kg/m lb./ft / / / / / / / / / / / / / / PVC-CAW Solid Rods, dark grey 9350 Ø Ø Weight Weight 1525 inch kg/m lb./ft / / / / / / / / PVC-CAW Solid Rods, swiss grey 9320 PVC-CAW Solid Rods, swiss grey 9320 Ø Weight 2000 Ø Weight kg/m kg/m Catalogue Semi-Finished Parts

108 PVC-CAW Solid Rods, white 9002 PVC-CAW Solid Rods, white 9002 Ø Weight 2000 Ø Weight kg/m kg/m PVC-CAW Solid Rods, ivory 9400 PVC-CAW Solid Rods, ivory 9400 Ø Weight 2000 Ø Weight kg/m kg/m Catalogue Semi-Finished Parts

109 PVC-CAW Solid Rods, black 9500 PVC-CAW Solid Rods, black 9500 Ø Weight 2000 Ø Weight kg/m kg/m PVC-CAW Solid Rods, red 9900 PVC-CAW Solid Rods, red 9900 Ø Weight 2000 Ø Weight kg/m kg/m Welding Rods PVC-CAW Welding Rods, dark grey 9350 a/d 3.0 b - Length m/kg Rod 1 m Rod 2 m Coil Spool 2 kg Spool 10 kg Round (RD) Triangular (TA 90) Triangular (TA 80) m rods in 2 kg bags 2 m rods in 2 kg bags Catalogue Semi-Finished Parts

110 PVC-CAW Welding Rods, dark grey 9350 a/d b Length m/kg Rod 1 m Rod 2 m Coil Spool 2 kg Spool 10 kg Three-core (TL) Special profile oval m rods in 2 kg bags 2 m rods in 2 kg bags PVC-CAW Welding Rods, light grey 9310 Round (RD) a/d b - - Length m/kg Rod 1 m Rod 2 m Coil Spool 2 kg Spool 10 kg Triangular (TA 90) m rods in 2 kg bags 2 m rods in 2 kg bags PVC-CAW Welding Rods, swiss grey 9320 Round (RD) a/d b - - Length m/kg Rod 1 m Rod 2 m Coil Spool 2 kg Spool 10 kg Triangular (TA 90) m rods in 2 kg bags 2 m rods in 2 kg bags PVC-CAW Welding Rods, white 9002 Round (RD) a/d b - - Length m/kg Rod 1 m Rod 2 m Coil Spool 2 kg Spool 10 kg Triangular (TA 80) m rods in 2 kg bags 2 m rods in 2 kg bags PVC-CAW Welding Rods, ivory 9400 a/d Length m/kg Rod 1 m Rod 2 m Coil Spool 2 kg Spool 10 kg Round (RD) m rods in 2 kg bags 2 m rods in 2 kg bags 110 Catalogue Semi-Finished Parts

111 PVC-CAW Welding Rods, red 9900 Round (RD) a/d Length m/kg Rod 1 m Rod 2 m Coil Spool 2 kg Spool 10 kg m rods in 2 kg bags 2 m rods in 2 kg bags 2013 Catalogue Semi-Finished Parts

112 SIMOSHIELD Product range SIMOSHIELD Sheets extruded caramel 799 brown 636 Sheets SIMOSHIELD Sheets, extruded, with black cherry design, brown 636 Thckn. 1.3 protective foil one side embossed kg/piece x kg/piece x Overall thickness : 1.5 (PVC-T sheet incl. decor foil) Other sizes and thicknesses as well as decors from the RENOLIT range available on request. SIMOSHIELD Sheets, extruded, with dark oak design, brown 636 Thckn. 1.3 protective foil one side embossed kg/piece x kg/piece x Overall thickness : 1.5 (PVC-T sheet incl. decor foil) Other sizes and thicknesses as well as decors from the RENOLIT range available on request. SIMOSHIELD Sheets, extruded, with golden oak design, caramel 799 Thckn. 1.3 protective foil one side embossed kg/piece x kg/piece x Overall thickness : 1.5 (PVC-T sheet incl. decor foil) Other sizes and thicknesses as well as decors from the RENOLIT range available on request. 112 Catalogue Semi-Finished Parts

113 SIMOSHIELD Sheets, extruded, with mahagony design, brown 636 Thckn. 1.3 protective foil one side embossed kg/piece x kg/piece x Overall thickness : 1.5 (PVC-T sheet incl. decor foil) Other sizes and thicknesses as well as decors from the RENOLIT range available on request. SIMOSHIELD Sheets, extruded, with walnut design, brown 636 Thckn. 1.3 protective foil one side embossed kg/piece x kg/piece x Overall thickness : 1.5 (PVC-T sheet incl. decor foil) Other sizes and thicknesses as well as decors from the RENOLIT range available on request. SIMOSHIELD Sheets, extruded, with sapele design, brown 636 Thckn. 1.3 protective foil one side embossed kg/piece x kg/piece x Overall thickness : 1.5 (PVC-T sheet incl. decor foil) Other sizes and thicknesses as well as decors from the RENOLIT range available on request Catalogue Semi-Finished Parts

114 3.2 Product group PVC-MZ Product types Standard stock item Special types (For further details, please see page 128) PVC-MZ-COLOR PVC-DS-TW, PVC-HSV Product properties Rigid PVC with increased impact strength Temperature range from -20 C to +60 C High chemical resistance UV-stabilised and weather resistant Proven in chemical tank and equipment construction Extremely versatile Standard stock item Key Product range: from page Areas of use Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C PVC-MZ-COLOR Rigid PVC, increased impact strength, suitable for thermoforming, UV-stabilised, coloured 115 Ceiling and Wall Panels Chemical Tank and Equipment Construction Exhibition Stand Design Mobility to +60 Processing methods (for details, see key) 114 Catalogue Semi-Finished Parts

115 PVC-MZ-COLOR Product range PVC-MZ-COLOR Sheets extruded light grey 9310 white 656 black 666 red 671 green 669 yellow 667 blue 670 Welding Rods light grey 9310 Certificates DIN 4102 B1 low flaability 1 to 4 (self-assessment without test certificate) UL 94 V-0 up from 1 PVC-U, Group 4 in accordance with ISO Sheets PVC-MZ-COLOR Sheets, extruded, light grey 9310 without protective foil Thckn x x PVC-MZ-COLOR Sheets, extruded, white 656 without protective foil Thckn x x Catalogue Semi-Finished Parts

116 PVC-MZ-COLOR Sheets, extruded, white 656 without protective foil Thckn x kg/piece 3000 x 1500 PVC-MZ-COLOR Sheets, extruded, black 666 without protective foil Thckn x PVC-MZ-COLOR Sheets, extruded, red 671 without protective foil Thckn x PVC-MZ-COLOR Sheets, extruded, green 669 without protective foil Thckn x PVC-MZ-COLOR Sheets, extruded, yellow 667 without protective foil Thckn x Catalogue Semi-Finished Parts

117 PVC-MZ-COLOR Sheets, extruded, yellow 667 without protective foil Thckn x PVC-MZ-COLOR Sheets, extruded, blue 670 without protective foil Thckn x Welding Rods PVC-MZ-COLOR Welding Rods, light grey 9310 a/d Rod 1 m Round (RD) m rods in 2 kg bags 2013 Catalogue Semi-Finished Parts

118 3.3 Product group PVC-GLAS Product types Standard stock item Special types (For further details, please see page 128) PVC-GLAS, PVC-GLAS-SX PVC-GLAS opal, PVC-GLAS clear Product properties Transparent rigid PVC Extremely permeable to light (up to 88 %) Perfect solution for visually appealing application Chemical resistance Low flaability in accordance with DIN 4102 B1 Highly cost-effective Standard stock item Key Product range: from page PVC-GLAS Rigid PVC, normal impact strength, transparent 119 PVC-GLAS-SX Rigid PVC, increased impact strength, transparent, suitable for die-cutting 121 Areas of use Mechanical Engineering Mechanical Engineering Chemical Tank and Equipment Chemical Tank and Equipment Construction Construction Laboratory Engineering Laboratory Engineering Exhibition Stand Design Exhibition Stand Design Display Design Display Design Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C Light transmission, % Processing methods (for details, see key) to (3 ) to (3 ) 118 Catalogue Semi-Finished Parts

119 PVC-GLAS Product range PVC-GLAS Sheets extruded Welding Rods transparent 9950 transparent 9950 Pipes transparent 9950 Certificates DIN 4102 B1 low flaability 1 to 4, general test certificate issued by an approved building inspectorate (Germany) UL 94 V-0 up from 1 NF P M1 from 1 to 3 BS 476 class 1 for 3 PVC-U, Group 2 in accordance with ISO Sheets PVC-GLAS Sheets, extruded, transparent 9950 protective foil both sides Thckn x x x Catalogue Semi-Finished Parts

120 Welding Rods PVC-GLAS Welding Rods, transparent 9950 Round (RD) a/d b - - Length m/kg Rod 1 m Rod 2 m Coil Spool 2 kg Triangular (TA 80) m rods in 2 kg bags 2 m rods in 2 kg bags Pipes PVC-GLAS Pipes, transparent 9950 Ø e[] SDR 51 kg/m e[] SDR 34.3 kg/m e[] SDR 21 kg/m e[] SDR 13.5 kg/m Standard length 5 m, e = Wall thickness PVC-GLAS Pipes, transparent 9950 Ø e[] SDR 9 kg/m Standard length 5 m, e = Wall thickness 120 Catalogue Semi-Finished Parts

121 PVC-GLAS-SX Product range PVC-GLAS-SX Sheets extruded transparent 9950 Certificates DIN 4102 B1 low flaability (self-assessment without test certificate) PVC-U, Group 4 in accordance with ISO Sheets PVC-GLAS-SX Sheets, extruded, transparent 9950 protective foil both sides Thckn x Catalogue Semi-Finished Parts

122 3.4 Product group PVC-C Product types Standard stock item PVC-C CORZAN Industrial Grade, PVC-C CORZAN FM 4910 G2 Product properties Post-chlorinated PVC Low flaability (PVC-C CORZAN FM 4910 G2) certified in accordance with FM 4910 High chemical resistance Excellent impact strength Very good processing characteristics High dimensional stability under heat Standard stock item Key Product range: from page Areas of use PVC-C CORZAN Industrial Grade Post-chlorinated PVC [CORZAN colours light grey 9310 (extruded sheets) and Swiss grey (pressed sheets)] 123 Chemical Tank and Equipment Construction Mechanical Engineering Environmental technology PVC-C CORZAN FM 4910 G2 Post-chlorinated, low-flaability PVC, Factory Mutual (FM) 4910 certified, (CORZAN colour white 9002) 125 Semiconductor Industry Environmental technology Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C to to +85 Processing methods (for details, see key) 122 Catalogue Semi-Finished Parts

123 PVC-C CORZAN Industrial Grade Product range PVC-C CORZAN Industrial Grade Sheets extruded Sheets pressed Welding Rods light grey 9310 swiss grey 9320 light grey 9310 Certificates DIN 4102 B1 low flaability (self-assessment without test certificate) Sheets PVC-C CORZAN Industrial Grade Sheets, extruded, light grey 9310 protective foil one side Thckn x PVC-C CORZAN Industrial Grade Sheets, pressed, swiss grey 9320 without protective foil pressed Thckn x Catalogue Semi-Finished Parts

124 Welding Rods PVC-C CORZAN Industrial Grade Welding Rods, light grey 9310 a/d b Length Rod 1 m m/kg Round (RD) Rod 2 m Coil Triangular (TA 90) m rods in 2 kg bags 2 m rods in 2 kg bags 124 Catalogue Semi-Finished Parts

125 PVC-C CORZAN FM 4910 G2 Product range PVC-C CORZAN FM 4910 G2 Sheets extruded Welding Rods white 9002 white 9002 Certificates DIN 4102 B1 low flaability (self-assessment without test certificate) FM 4910 low flaability Sheets PVC-C CORZAN FM 4910 G2 Sheets, extruded, white 9002 protective foil one side Thckn Thckn. inch 1/8 3/16 1/4 3/8 1/2 5/8 3/ x x Welding Rods PVC-C CORZAN FM 4910 G2 Welding Rods, white 9002 a/d Length Rod 1 m m/kg Round (RD) Rod 2 m Coil m rods in 2 kg bags 2 m rods in 2 kg bags 2013 Catalogue Semi-Finished Parts

126 3.5 Product group PVC-KYRNIT Product types Standard stock item PVC-KYRNIT Product properties Pressed sheets made of Rigid PVC Weather-stabilised Good electrical insulating properties Excellent processing characteristics Chemical resistance Extremely versatile Standard stock item Key Product range: from page Areas of use Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C PVC-KYRNIT Rigid PVC, pressed 127 Mechanical Engineering Chemical Tank and Equipment Construction to +60 Processing methods (for details, see key) 126 Catalogue Semi-Finished Parts

127 PVC-KYRNIT Product range PVC-KYRNIT Sheets pressed dark grey 9350 black 9500 Certificates DIN 4102 B1 low flaability (self-assessment without test certificate) PVC-U, Group 1 in accordance with ISO Sheets PVC-KYRNIT Sheets, pressed, dark grey 9350 without protective foil pressed Thckn x x PVC-KYRNIT Sheets, pressed, black 9500 without protective foil pressed Thckn x Catalogue Semi-Finished Parts

128 3.6 Special PVC rigid products Available upon request PVC rigid PVC-CAW-UV PVC-T matt PVC-LZ PVC-WT PVC embossed PVC-DS-TW PVC-HSV PVC-GLAS opal PVC-GLAS clear Key Rigid PVC, normal impact strength, chemical resistance, UV-stabilised Rigid PVC, UV-stabilised, specially for door fabrication, matt Rigid PVC, physiologically safe Rigid PVC, normal impact strength, for use in hydro-engineering Rigid PVC, with embossed surface on one side Rigid PVC, increased impact strength, for use in drinking-water sector and swiing-pool construction Rigid PVC, increased impact strength, suitable for thermoforming Rigid PVC, normal impact strength, translucent, opal Rigid PVC, normal impact strength, transparent, neutral colour 128 Catalogue Semi-Finished Parts

129 2013 Catalogue Semi-Finished Parts

130 4 PVC foamed 130 Catalogue Semi-Finished Parts

131 4.1 Product group SIMOPOR Product group COPLAST Special PVC foamed products 141 PVC foamed 2013 Catalogue Semi-Finished Parts

132 4.1 Product group SIMOPOR Product types Standard stock item Special types (For further details, please see page 141) SIMOPOR-LIGHT, SIMOPOR-ULTRALIGHT, SIMOPOR-COLOR, SIMOPOR-DIGITAL SIMOPOR Product properties PVC free-foam sheet Excellent processing properties Extremely light materials Wide range of colours (SIMOPOR-COLOR) Special characteristics for digital printing (SIMOPOR-DIGITAL) Low flaability in accordance with DIN 4102 B1 (SIMOPOR-LIGHT, SIMOPOR-DIGITAL) Standard stock item SIMOPOR-LIGHT SIMOPOR-ULTRALIGHT SIMOPOR-COLOR SIMOPOR-DIGITAL Key Product range: from page PVC free-foam sheet, low density, excellent processing capabilities 133 PVC free-foam sheet, very low density, lightweight design, simple handling 134 PVC free-foam sheet, perfectly even surface finish, coloured 135 PVC free-foam sheet, optimised for digital direct printing, brilliant white surface, UV-stabilised, antistatic (available upon request) 137 Areas of use Display Design Exhibition Stand Design Partitions and arena boards Display Design Exhibition Stand Design Partitions and arena boards Display Design Exhibition Stand Design Partitions and arena boards Digital direct printing Exhibition Stand Design Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Flexural modulus of elasticity, MPa, DIN EN ISO 178 Shore hardness D, DIN EN ISO 868 Temperature range, C to to to to +60 Processing methods (for details, see key) 132 Catalogue Semi-Finished Parts

133 SIMOPOR-LIGHT Product range SIMOPOR-LIGHT Sheets extruded white 9002 Certificates DIN 4102 B1 low flaability 1 to 19, general test certificate issued by an approved building inspectorate (Germany) NF P M1 from 3 to 10 Sheets SIMOPOR-LIGHT Sheets, extruded, white 9002 protective foil one side foamed Thckn PAL x PAL x x 1220 PAL x 1530 PAL x 2030 PAL PAL = Pallet unit (number of sheets per pallet) SIMOPOR-LIGHT sheets are charged per sq.m Catalogue Semi-Finished Parts

134 SIMOPOR-ULTRALIGHT Product range SIMOPOR-ULTRALIGHT Sheets extruded white 9002 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Sheets SIMOPOR-ULTRALIGHT Sheets, extruded, white 9002 Thckn protective foil one side foamed PAL x PAL = Pallet unit (number of sheets per pallet) SIMOPOR-ULTRALIGHT sheets are charged per sq.m. 134 Catalogue Semi-Finished Parts

135 SIMOPOR-COLOR Product range SIMOPOR-COLOR Sheets extruded black 9500 red 9900 green 9700 yellow 9600 grey 9300 blue 9800 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Sheets SIMOPOR-COLOR Sheets, extruded, black 9500 protective foil one side foamed Thckn x x 1530 PAL PAL x 2030 PAL PAL = Pallet unit (number of sheets per pallet) SIMOPOR-COLOR sheets are charged per sq.m. SIMOPOR-COLOR Sheets, extruded, red 9900 protective foil one side foamed Thckn x x 1530 PAL PAL x 2030 PAL PAL = Pallet unit (number of sheets per pallet) SIMOPOR-COLOR sheets are charged per sq.m Catalogue Semi-Finished Parts

136 SIMOPOR-COLOR Sheets, extruded, green 9700 protective foil one side foamed Thckn x x 1530 PAL PAL x 2030 PAL PAL = Pallet unit (number of sheets per pallet) SIMOPOR-COLOR sheets are charged per sq.m. SIMOPOR-COLOR Sheets, extruded, yellow 9600 protective foil one side foamed Thckn x x 1530 PAL PAL x 2030 PAL PAL = Pallet unit (number of sheets per pallet) SIMOPOR-COLOR sheets are charged per sq.m. SIMOPOR-COLOR Sheets, extruded, grey 9300 protective foil one side foamed Thckn x x 1530 PAL PAL x 2030 PAL PAL = Pallet unit (number of sheets per pallet) SIMOPOR-COLOR sheets are charged per sq.m. SIMOPOR-COLOR Sheets, extruded, blue 9800 protective foil one side foamed Thckn x x 1530 PAL PAL x 2030 PAL PAL = Pallet unit (number of sheets per pallet) SIMOPOR-COLOR sheets are charged per sq.m. 136 Catalogue Semi-Finished Parts

137 SIMOPOR-DIGITAL Product range SIMOPOR-DIGITAL Sheets extruded white 1210 Certificates DIN 4102 B1 low flaability 3 to 10, general test certificate issued by an approved building inspectorate (Germany) NF P M1 from 3 to 10 Sheets SIMOPOR-DIGITAL Sheets, extruded, white 1210 protective foil one side foamed Thckn x x x x SIMOPOR-DIGITAL sheets are charged per sq.m Catalogue Semi-Finished Parts

138 4.2 Product group COPLAST Product types Standard stock item Special types (For further details, please see page 141) COPLAST-AS, COPLAST-AS-X COPLAST-COLOR, COPLAST-AR-X Product properties Coextruded PVC free-foam sheet Antistatic UV and weather resistant High dimensional stability Excellent processing characteristics High-quality appearance Standard stock item Key Product range: from page COPLAST-AS Coextruded PVC foam sheet, UV-stabilised, antistatic, outer skins white 139 COPLAST-AS-X Coextruded PVC foam sheet, UV-stabilised, antistatic, outer skins white, with grey core 140 Areas of use Ceiling and Wall Panels Ceiling and Wall Panels Exhibition Stand Design Exhibition Stand Design Partitions and arena boards Display Design Partitions and arena boards Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Flexural modulus of elasticity, MPa, DIN EN ISO 178 Shore hardness D, DIN EN ISO 868 Temperature range, C Processing methods (for details, see key) to to Catalogue Semi-Finished Parts

139 COPLAST-AS Product range COPLAST-AS Sheets extruded white 9002 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate), DIN 4102 B1 low flaability for 10 available upon request, general test certificate issued by an approved building inspectorate (Germany) NF P M1 for 10 available upon request Sheets COPLAST-AS Sheets, extruded, white 9002 protective foil one side foamed Thckn x 1000 PAL x 1220 PAL x 1000 PAL x 1220 PAL x 1500 PAL PAL = Pallet unit (number of sheets per pallet) COPLAST-AS sheets are charged per sq.m Catalogue Semi-Finished Parts

140 COPLAST-AS-X Product range COPLAST-AS-X Sheets extruded white 9002 Certificates DIN 4102 B2 normal flaability (self-assessment without test certificate) Sheets COPLAST-AS-X Sheets, extruded, white 9002 Thckn protective foil one side foamed PAL x PAL PAL = Pallet unit (number of sheets per pallet) COPLAST-AS-X sheets are charged per sq.m. COPLAST-AS-X with grey core x x 1220 PAL x 1500 PAL Catalogue Semi-Finished Parts

141 4.3 Special PVC foamed products Available upon request PVC foamed SIMOPOR COPLAST-COLOR COPLAST-AR-X Key PVC free-foam sheet, increased rigidity Coextruded PVC foam sheet, coloured outer skins Coextruded PVC foam sheet, with anti-slip surface on one side 2013 Catalogue Semi-Finished Parts

142 5 PETG 142 Catalogue Semi-Finished Parts

143 5.1 Product group SIMOLUX Special PETG products 148 PETG 2013 Catalogue Semi-Finished Parts

144 5.1 Product group SIMOLUX Product types Standard stock item Special types (For further details, please see page 148) SIMOLUX, SIMOLUX opal SIMOLUX satined, SIMOLUX embossed, SIMOLUX-F, SIMOLUX-UV Product properties Thermoplastic copolyester, transparent (PETG) Extreme impact resistance, even at temperatures below zero (down to -40 C) Extremely permeable to light (up to 90%) Excellent thermoforming properties Outstanding processing parameters Resistant to chemicals Standard stock item Key Product range: from page SIMOLUX Thermoplastic copolyester, transparent 145 SIMOLUX opal Thermoplastic copolyester, opal 147 Areas of use Display Design Ceiling and Wall Panels Food Industry Exhibition Stand Design Exhibition Stand Design Display Design Mechanical Engineering Mechanical Engineering Orthopaedics Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C Light transmission, % Processing methods (for details, see key) to (3 ) to (3 ) 144 Catalogue Semi-Finished Parts

145 SIMOLUX Product range SIMOLUX Sheets extruded Welding Rods transparent 9950 transparent 9950 Certificates DIN 4102 B1 low flaability 1 to 8, general test certificate issued by an approved building inspectorate (Germany) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Physiological safety in accordance with FDA Approved for use in rail vehicles in accordance with DIN 5510 in 3, 5 and 10 Suitable as machine safety screens in accordance with DIN EN and DIN EN in 6 and 10 Sheets SIMOLUX Sheets, extruded, transparent 9950 protective foil both sides Thckn x x x x x Catalogue Semi-Finished Parts

146 SIMOLUX Sheets, extruded, transparent 9950 protective foil both sides Thckn x x Welding Rods SIMOLUX Welding Rods, transparent 9950 Round (RD) a/d Length m/kg Rod 1 m Rod 2 m Coil m rods in 2 kg bags 2 m rods in 2 kg bags 146 Catalogue Semi-Finished Parts

147 SIMOLUX opal Product range SIMOLUX opal Sheets extruded opal 9952 Certificates DIN 4102 B1 low flaability 3 to 8, general test certificate issued by an approved building inspectorate (Germany) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Sheets SIMOLUX opal Sheets, extruded, opal 9952 without protective foil protective foil both sides Thckn x x x x x SIMOLUX opal Sheets, extruded, opal 9952 protective foil both sides Thckn x Catalogue Semi-Finished Parts

148 5.2 Special PETG products Available upon request PETG SIMOLUX satined SIMOLUX embossed SIMOLUX-F SIMOLUX-UV Key Thermoplastic copolyester, satin-finish surface Thermoplastic copolyester, embossed surface Thermoplastic copolyester, low flaability (non-burning droplets) Thermoplastic copolyester, UV-stabilised 148 Catalogue Semi-Finished Parts

149 2013 Catalogue Semi-Finished Parts

150 6 PVDF, E-CTFE 150 Catalogue Semi-Finished Parts

151 6.1 Product group PVDF Product group PVDF-EL Product group E-CTFE Special PVDF, E-CTFE products 163 PVDF, E-CTFE 2013 Catalogue Semi-Finished Parts

152 6.1 Product group PVDF Product types Standard stock item Special types (For further details, please see page 163) PVDF, PVDF-SK, PVDF-GK PVDF-AK, PVDF-CL, PVDF-C Product properties High-performance material FM 4910 low flaability Excellent chemical resistance Exceptionally good ageing resistance High rigidity Standard stock item PVDF PVDF-SK PVDF-GK Key Product range: from page Partially fluorinated high-performance plastic, homopolymeric polyvinylidene fluoride, DIBt-approved, FM 4910-certified, natural 153 Partially fluorinated high-performance plastic, homopolymeric polyvinylidene fluoride, polyester-backed, natural 155 Partially fluorinated high-performance plastic, homopolymeric polyvinylidene fluoride, glass-fibre-backed, natural 156 Areas of use Chemical Tank and Equipment Construction Power and Electrical Engineering Laboratory Engineering Food Industry Environmental technology Lining and Composite Construction Lining and Composite Construction Environmental technology Environmental technology Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C to to to +140 Processing methods (for details, see key) 152 Catalogue Semi-Finished Parts

153 PVDF Product range PVDF Certificates Sheets extruded natural 9150 Sheets pressed natural 9150 Solid Rods natural 9150 Welding Rods natural 9150 DIN 4102 B1 low flaability (self-assessment without test certificate) FM 4910 low flaability Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Physiological safety in accordance with FDA Sheets PVDF Sheets, extruded, natural 9150 protective foil both sides Thckn x x PVDF Sheets, pressed, natural 9150 protective foil both sides pressed Thckn x Catalogue Semi-Finished Parts

154 PVDF Sheets, pressed, natural 9150 protective foil both sides pressed Thckn x Solid Rods PVDF Solid Rods, natural 9150 Ø Weight 1000 kg/m PVDF Solid Rods, natural 9150 Ø Weight 1000 kg/m For technical reasons, colour deviations may occur in solid rods with diameters of 250 or more. For technical reasons, colour deviations may occur in solid rods with diameters of 250 or more. Welding Rods PVDF Welding Rods, natural 9150 Round (RD) a/d b - - Length m/kg Rod 1 m Rod 2 m Coil Spool 2 kg Triangular (TA 90) Triangular (TA 80) m rods in 2 kg bags 2 m rods in 2 kg bags 154 Catalogue Semi-Finished Parts

155 PVDF-SK Product range PVDF-SK Sheets extruded natural 9150 Certificates DIN 4102 B1 low flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Sheets PVDF-SK Sheets, extruded, natural 9150 protective foil both sides backed Thckn x x x Nominal thickness equals residual wall thickness. Recoended minimum wall thickness for liner sheets: Catalogue Semi-Finished Parts

156 PVDF-GK Product range PVDF-GK Sheets extruded natural 9150 Certificates DIN 4102 B1 low flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Sheets PVDF-GK Sheets, extruded, natural 9150 Thckn protective foil both sides backed kg/piece x kg/piece x Nominal thickness equals residual wall thickness. Recoended minimum wall thickness for liner sheets: Catalogue Semi-Finished Parts

157 6.2 Product group PVDF-EL Product types Standard stock item Special types (For further details, please see page 163) PVDF-EL PVDF-EL-SK, PVDF-EL-GK Product properties Electrically conductive Suitable for use in explosive atmospheres High chemical resistance High corrosion resistance Exceptionally good ageing resistance High-performance material Standard stock item Key Product range: from page Areas of use Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C PVDF-EL Polyvinylidene fluoride, electrically conductive 158 Chemical Tank and Equipment Construction Power and Electrical Engineering Environmental technology to +140 Processing methods (for details, see key) 2013 Catalogue Semi-Finished Parts

158 PVDF-EL Product range PVDF-EL Sheets extruded Sheets pressed black 9500 black 9500 Welding Rods Certificates DIN 4102 B1 low flaability (self-assessment without test certificate) Sheets PVDF-EL Sheets, extruded, black 9500 protective foil both sides Thckn x PVDF-EL welding rods available on request. For more information about explosion protection, please consult our official position paper relating to EU Directive 94/9/EC (ATEX 100a/ATEX 95). If you have any further questions, please feel free to contact our Technical Service Centre. PVDF-EL Sheets, pressed, black 9500 Thckn without protective foil pressed kg/piece x PVDF-EL welding rods available on request. For more information about explosion protection, please consult our official position paper relating to EU Directive 94/9/EC (ATEX 100a/ATEX 95). If you have any further questions, please feel free to contact our Technical Service Centre. 158 Catalogue Semi-Finished Parts

159 6.3 Product group E-CTFE Product types Standard stock item Special types (For further details, please see page 163) E-CTFE, E-CTFE-GK E-CTFE-AK Product properties High-performance material Extremely good chemical resistance, also in the alkaline range Excellent impact strength Excellent processing characteristics Excellent weathering resistance Standard stock item Key Product range: from page Areas of use E-CTFE Partially fluorinated high-performance plastic, ethylene-chlorotrifluoroethylene copolymer, natural 160 Chemical Tank and Equipment Construction Power and Electrical Engineering Laboratory Engineering Mechanical Engineering Environmental technology E-CTFE-GK Partially fluorinated high-performance plastic, ethylene-chlorotrifluoroethylene copolymer, glass-fibre-backed, natural 162 Lining and Composite Construction Environmental technology Material specifications Density, g/cm³, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m², DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Temperature range, C without break to to +150 Processing methods (for details, see key) 2013 Catalogue Semi-Finished Parts

160 E-CTFE Product range E-CTFE Sheets extruded Sheets pressed natural 9150 natural 9150 Welding Rods natural 9150 Certificates DIN 4102 B1 low flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Physiological safety in accordance with FDA Sheets E-CTFE Sheets, extruded, natural 9150 protective foil both sides Thckn x x x E-CTFE Sheets, pressed, natural 9150 without protective foil planed Thckn x Catalogue Semi-Finished Parts

161 Welding Rods E-CTFE Welding Rods, natural 9150 Round (RD) a/d Length m/kg Rod 1 m Coil m rods in 2 kg bags 2013 Catalogue Semi-Finished Parts

162 E-CTFE-GK Product range E-CTFE-GK Sheets extruded natural 9150 Certificates DIN 4102 B1 low flaability (self-assessment without test certificate) Physiological safety in accordance with BfR (German Federal Institute for risk valuation) Sheets E-CTFE-GK Sheets, extruded, natural 9150 Thckn protective foil both sides backed kg/piece x kg/piece x Nominal thickness equals residual wall thickness. Recoended minimum wall thickness for liner sheets: x x Catalogue Semi-Finished Parts

163 6.4 Special PVDF, E-CTFE products Available upon request PVDF, E-CTFE PVDF-AK PVDF-CL PVDF-C PVDF-EL-SK PVDF-EL-GK E-CTFE-AK Key Polyvinylidene fluoride, aramid-backed Polyvinylidene fluoride, stabilised to protect against chlorine radicals Copolymeric polyvinylidene fluoride Polyvinylidene fluoride, electrically conductive, polyester-backed Polyvinylidene fluoride, electrically conductive, glass-fibre-backed Ethylene-chlorotrifluoroethylene copolymer, aramid-backed 2013 Catalogue Semi-Finished Parts

164 7 Additional Product Information 164 Catalogue Semi-Finished Parts 2013

165 7.1 Finished Parts Twin-Wall Sheets Multilayer Sheets SIMOSHIELD Eco-Ice PE FOAM/PP FOAM Hollow Rods Profiles Tank Corners ATEX REACH 185 Other Info 2013 Catalogue Semi-Finished Parts 165

166 7.1 SIMONA Finished Parts Diversity and precision from a single source SIMONA is one of the few manufac turers worldwide with a product portfolio that includes both finished and semi-finished thermoplastic parts. Not only are we able to offer you individual solutions with regard to product design, we are also equipped to develop materials with specially engineered properties tailored to your requirements. SIMONA supplies a broad range of finished parts made of ultra-highmolecular-weight polyethylene in the product categories dehoplast PE-1000 and dehoplast PE-55 as well as parts made of other materials, e.g. PP, PVC, PA, POM, PEEK and PET. Over the years, these materials have proven themselves to be particularly suited to the manufacture of sliding rails, chain guides, guide rails and other components exposed to abrasion. Displaying excellent durability, dehoplast PE-1000 and dehoplast PE-55 are highly resistant to chemicals and mechanical loads, as well as combining corrosion resistance with excellent processing characteristics. Product range Chain guides Steel channels Cable runners Sliding rails for flat-top chains Guide rails (suitable for flat steel profile and C/M channels) Compact curves for flat-top chains Finished parts made of special PE materials (e. g. dehoplast x-glide, x-protect, x-detect) Special profiles LIFT-BOX chain tensioners with gas pressure spring 166 Catalogue Semi-Finished Parts 2013

167 Our CAD/CAM capabilities Supported by state-of-the-art IT solutions, we are able to respond directly to individual requirements and deliver cost-effective solutions in virtually any size and of any design complexity from single components to complete assemblies. In order to manufacture finished parts according to your specifications, we simply require your design drawings in a step, iges, dxf or dwg format. If required, we can also create a 3D model on the basis of your sketches. Long-standing experience in machining Displaying outstanding material properties, our finished parts have an exceptional track record when it comes to quality and reliability. Drawing on the benefits of advanced technology, we are able to supply products manufactured to the highest standards of engineering precision and in excellent surface quality. Take advantage of our long-standing expertise in machining. We look forward to meeting your exacting standards. Further information We will be pleased to send you our Finished Parts catalogue on request. Technical services Component design Machining Finishing Annealing of finished parts Production of assemblies Machinery and equipment CNC milling machines 5-axis milling machines with max. travel of 5,750 x 1,750 x 400 (L x W x H) 3-axis milling machines with max. travel of 6,000 x 2,000 x 550 (L x W x H) CNC lathes with turning diameter of up to 1,200 Profiling and other processing machinery Catalogue Finished Parts INFO +49 (0) engineering@simona.de 2013 Catalogue Semi-Finished Parts 167

168 7.2 SIMONA Twin-Wall Sheets Light, quiet, strong and versatile At a glance Variable number of webs Variable sheet thickness Excellent fabrication properties High rigidity combined with low weight Wide range of potential applications Assistance with structural calculations SIMONA Twin-Wall Sheets are a highly innovative and ver - sa tile product. Twin-wall sheets are made of PE 100, PP-DWU AlphaPlus (PP-H), PPs or PP-C-UV sheets using state-of-the-art machine technology. They combine the benefits of high rigidity and low specific weight with good heat insulation and userfriendly processing. Twin-wall sheets can be processed in the same way as solid materials. Design-specific advantages High rigidity and strength High break resistance Rectangular tanks possible without steel reinforcement Lower weight than solid material due to cavity structure Excellent sound insulation (DIN ISO certificates available on request) Low heat transfer coefficients (k value/u value) based on ISO 8301, EN Wide range of applications Plastic-specific advantages High thermal insulation Good electrical insulation Good tribological properties High wear resistance High chemical resistance Low water absorption Resistance to microorganisms Excellent fabrication capability 168 Catalogue Semi-Finished Parts 2013

169 Product range SIMONA PE-HKP PE 100 is a high-heatresistant, UV-stabilised polyethylene. SIMONA PP-HKP PP-DWU AlphaPlus (PP-H) is a homopolymeric, alphanucleated, permanent-heatresistant polypropylene. SIMONA PPs-HKP PPs is a low-flaability, homopolymeric, permanent-heat-resistant polypropylene. SIMONA PP-C-UV-HKP PP-C-UV is a copolymeric, UV-stabilised polypropylene. Benefits Impact resistant down to 50 C Insensitive to weather High chemical resistance Benefits Temperature range up to +100 C High chemical resistance Benefits Low flaability as per DIN 4102 B1 High chemical resistance Benefits UV-stabilised Maximum chemical resistance Product range for twin-wall sheets Twin-Wall Sheets Total thickness Thickness outer skin Web spacing Weight kg/pce 3,000 x 1,000 PE-HKP, black PP-HKP, grey PPs-HKP, grey PP-C-UV-HKP, blue (top)/grey (bottom) available on request Catalogue Semi-Finished Parts 169

170 Material specifications (standard sheets) Material specifications Density, g/cm 3, DIN EN ISO 1183 Impact strength, kj/m 2, DIN EN ISO 179 PE-HKP PP-HKP PPs-HKP no break no break no break Service temperature range, C 50 to to to +100 Fire behaviour, DIN 4102 normal flaability normal flaability B1 low flaability Product range for corner elements PE-HKP Corner Elements, 45, black Total length Leg length Total thickness Thickness outer skin Web spacing 1, , , , , , PE-HKP Corner Elements, 90, black Total length Leg length Total thickness Thickness outer skin Web spacing 1, , , , , , Catalogue Semi-Finished Parts 2013

171 PP-HKP Corner Elements, 45, grey Total length Leg length Total thickness Thickness outer skin Web spacing 1, , , , , , PP-HKP Corner Elements, 90, grey Total length Leg length Total thickness Thickness outer skin Web spacing 1, , , , , , Flat connections We also supply connection profiles (flat connections) for the purpose of simplifying extrusion welding of twin-wall sheets. PE-HKP Flat Connection, black Length Width Thickness 2, INFO +49 (0) industry@simona.de 2013 Catalogue Semi-Finished Parts 171

172 7.3 SIMONA PE Multilayer Sheets Sheets for tank manufacture Benefits at a glance Excellent barrier against gases and liquids Corrosion resistance High impact resistance and good rigidity Physiological safety Outstanding thermoforming properties Service temperature range from 50 C to +80 C Suitable for machine welding without impairing barrier properties SIMONA PE Multilayer Sheets are made of polyethylene and feature a barrier layer engineered from EVOH. Owing to the barrier properties of the EVOH layer against liquids and the excellent thermoforming characteristics of polyethylene, SIMONA PE Multilayer Sheets open up new approaches to the design of industrial tanks for the storage and transport of liquid substances such as fuels, solvents, chemicals and perfumes. Design of SIMONA PE Multilayer Sheets SIMONA PE Multilayer Sheets consist of two high-density polyethylene outer layers (PE-HD), an ethylene vinyl alcohol (EVOH) barrier layer to prevent diffusion and adhesive layers on both sides (Figure 1). These two adhesive layers are needed because the barrier plastic, EVOH, has no natural adhesion with PE. In principle, EVOH can be replaced by other barrier materials. The layer design of SIMONA PE Multilayer Sheets can be tailored to suit specific requirements, i. e. it is possible to incorporate different numbers of layers and different layer thicknesses. Any off-cut materials can be re - granulated and, based on a defined materials cycle, used as a regrind layer in the sheet layer design. The regrind can be incorporated either as a single layer on the external wall or as a layer on both sides of the diffusion barrier. 172 Catalogue Semi-Finished Parts 2013

173 Figure 1: Examples of SIMONA PE Multilayer Sheet design 5-layer design 6-layer design 7-layer design HDPE HDPE HDPE Adhesive EVOH Adhesive Regrind Adhesive EVOH Adhesive Regrind Adhesive EVOH Adhesive Regrind HDPE HDPE HDPE Fields of application Fuel tanks Tanks for liquid media storage Thermoforming applications Gas tanks Product range SIMONA PE Multilayer Sheets Material Colour Thickness Width Layer design EVOH layer thickness PE-HD, EVOH barrier layer, adhesive Outer layers black or natural 2 to 10 max. 2,400 5 to 7 layers, variable layer thicknesses 1 to 10 per cent of total thickness Other material combinations and colours require specific testing. SIMONA AG's quality management system relating to the manufacture of multilayer sheets for the automotive industry is certified to ISO/TS INFO +49 (0) mobility@simona.de 2013 Catalogue Semi-Finished Parts 173

174 7.4 SIMONA SIMOSHIELD Sheets for door manufacture Wide range of applications Door manufacture by means of thermoforming External doors and gates Panelling Designer articles with a woodgrain look Garage doors Featuring a visible and tactile woodgrain finish, SIMONA SIMOSHIELD sheets made of PVC-T have been designed specifically for door fabrication. SIMONA SIMOSHIELD is produced with the help of an inno vative laminating process. The decorative foils are applied to coloured SIMONA PVC-T sheets in a single operation during extrusion. As no additional step of applying wood decor is required, this method is particularly cost-effective. Incorporating premium-quality decorative foils by RENOLIT, SIMONA SIMOSHIELD sheets offer a protective shield against UV influences and reduce heat build-up. This makes them the perfect choice for outdoor applications. SIMONA SIMOSHIELD sheets have outstanding thermoforming properties and are suitable for a wide range of processing methods. Impressive features UV- and weather-resistant Minimised risk of cracking and bowing Excellent thermoforming properties IR-reflective (decorative sheets) High impact resistance Low water absorption Service temperature range from 20 C to +60 C Cadmium- and lead-free production REACH- and RoHS-compliant 174 Catalogue Semi-Finished Parts 2013

175 golden oak black cherry mahogany walnut Special designs on request On request, we are able to offer SIMONA SIMOSHIELD sheets with the RENOLIT design of your choice. Embossed sheets SIMONA PVC-T sheets in white, caramel and brown can be supplied with a special grain structure on request. caramel brown white Product range SIMONA SIMOSHIELD Formats and thicknesses (in ) 2,175 x (including decorative foil) 2,000 x (including decorative foil) Colours golden oak black cherry mahogany walnut SIMONA PVC-T Material specifications Material specifications SIMONA SIMOSHIELD SIMONA PVC-T Density, g/cm DIN EN ISO 1183 Tensile modulus of elasticity, 2,500 3,500 MPa, DIN EN ISO 527 Yield stress, MPa, DIN EN ISO 527 Temperature range, C 20 to to +60 Vicat temperature, C Fire behaviour DIN 4102 B1 low flaability BS 476 Class 1 Formats and thicknesses (in ) 2,175 x ,000 x Colours choice of whites caramel brown Other formats, thicknesses and decors from the RENOLIT range are available on request. For further information, please contact our sales department. INFO +49 (0) industry@simona.de 2013 Catalogue Semi-Finished Parts 175

176 7.5 SIMONA Eco-Ice Sheets for ice rinks At a glance Excellent glide properties Consistent surface quality High wear resistance Physiologically safe (in accordance with BfR, FDA and EU) Good chemical resistance to cleaning agents UV-stabilised (special option with ten-year warranty) Suitable for use in a wide range of temperatures Energy efficiency has become a key factor in almost all decisions taken by city council and local authority representatives. This is particularly true of municipal leisure facilities that include year-round ice rinks for leisure or training purposes. While ice rinks increase the popularity of a city, they do consume a great deal of energy. SIMONA Eco-Ice plastic sheets combine the benefits of year-round skating with reduced energy and operating costs. The gliding properties of a surface made of SIMONA Eco-Ice are comparable to those of freshly cleaned ice. Cooling equipment and ice machines, however, are a thing of the past. SIMONA Eco-Ice is available in various types of polyethylene: PE-HD (high heat stability), PE-HMW (high molecular weight) and PE-UHMW (ultra-high molecular weight). Universal fields of application New stadiums and stadium upgrades Training areas for ice skating and ice hockey Ice rinks for events and festivities such as Christmas markets Ice rinks for holiday parks and hotels Mobile ice rinks 176 Catalogue Semi-Finished Parts 2013

177 SIMONA Eco-Ice PE-HD PE-HMW PE-UHMW Product range Pressed sheets (formats/thicknesses in ) 2,000 x 1, to to to 120 Colours natural natural natural Other formats, colours and thicknesses available on request. Save 100 % on refrigeration costs Unlike conventional ice rinks, no refrigeration systems are required to produce ice. Conventional ice skates can be used directly on the plastic panels, which are securely joined to one another to form an ice rink surface. The smoothness of the surface is virtually identical to that of freshly cleaned artificial ice. Simple to lay The sheets can be laid by means of the tongue-and-groove method to form an absolutely smooth and even surface. Simple to maintain In order to maintain the optimal performance of a plastic ice rink, we recoend cleaning it every ten days or so with an industrial vacuum cleaner or a polishing machine. Thanks to innovative technology, plastic ice rinks made out of SIMONA Eco-Ice are large ly maintenance-free the plastic sheets have excellent, long-lasting glide properties. If necessary, the plastic ice rink panels can simply be planed to restore their original surface quality. Eco-friendly and long-lasting Production of the plastic sheeting is sustainable, as production waste and any obsolete sheets are recycled. SIMONA AG's quality, environmental and energy management system is certified in accordance with DIN EN ISO 9001, DIN EN ISO and DIN EN ISO What is more, there is absolutely no need for any cooling fluids. Traditional ice rinks require far more energy than plastic ice rinks, which have a service life of up to ten years under normal circumstances. INFO +49 (0) engineering@simona.de 2013 Catalogue Semi-Finished Parts 177

178 7.6 SIMONA PE FOAM/PP FOAM Low weight and high rigidity Excellent properties Very easy to process Excellent surface quality High flexural strength Corrosion-free Easy to clean UV stability (PE FOAM) Printable after pre-treatment Featuring a closed-cell foamed core and coextruded outer layers, SIMONA PE FOAM and SIMONA PP FOAM sheets provide an outstanding combination of low weight and high rigidity. SIMONA PE FOAM SIMONA PE FOAM combines excellent processing properties with the benefits of high sur face quality and low water absorption. With SIMONA PE FOAM, it is possible to replace many applications that use plywood and MDF (medium density fibreboard). Compared to the latter wood-based materials, PE FOAM is much more durable, especially in applications exposed to moist/wet conditions. SIMONA PP FOAM SIMONA PP FOAM sheets have smooth, compact surfaces and offer maximum rigidity. Owing to these properties, together with good chemical resistance, excellent fabrication capability and low water absorption, SIMONA PP FOAM is ideal for linings, encasements and, in apparatus construction, for applications with non-critical chemical and mechanical stresses. SIMONA PE FOAM features UV stabilisation as standard for outdoor applications and has a scratch-resistant embossed surface. 178 Catalogue Semi-Finished Parts 2013

179 Fields of application SIMONA PE FOAM Boatbuilding (partitions, bulkheads, control desks, etc.) Banner material Toilet containers, toilet walls and toilet doors Partitions in agriculture and livestock farming Fields of application SIMONA PP FOAM Apparatus components Encasements Tank covers Transport containers Small sewage treatment plants Packaging systems Insulation components Reusable containers Linings Material specifications Material specifications SIMONA PE FOAM SIMONA PP FOAM Density, g/cm 3, DIN EN ISO Tensile module of elasticity, MPa, 700 1,100 DIN EN ISO 527 Shore hardness, D, DIN EN ISO Fire behaviour, DIN 4102 normal flaability normal flaability Temperature range, C 50 to to Low weight and density, high rigidity Density comparison in g/cm Product range PE 100 PE FOAM PP-DWU PP FOAM SIMONA PE FOAM/PP FOAM PE FOAM PP FOAM Extruded sheets (formats/thicknesses in ) 2,000 x 1,000 6, 8, 10, 12, 19 5, 6, 8, 10, 15, 20 2,000 x 1, ,000 x 1,500 5, 6, 8, 10, 15, 20 Colours white grey Other formats, colours and intermediate thicknesses are available on request. The chart illustrates the difference in densities of compact PE and PP compared to SIMONA PE FOAM and SIMONA PP FOAM. INFO +49 (0) industry@simona.de 2013 Catalogue Semi-Finished Parts 179

180 7.7 SIMONA Hollow Rods Efficient production of fittings and finished parts Economic advantages SIMONA Hollow Rods offer significant material and cost savings compared to solid rods. Excellent processing capability SIMONA Hollow Rods can be processed very efficiently by means of various methods, including welding, milling, drilling, sawing, cutting and water-jet cutting. On account of their geometry, SIMONA Hollow Rods are the ideal material for manufacturing fittings and finished parts by means of CNC lathe machining. Extruded from PE 100, the hollow rods combine high chemical resistance with excellent processing properties, superior strength and high rigidity. Compared to solid rods, it is possible to achieve signi ficant savings with regard to material and costs. The new product portfolio has been extended to include an extensive range of sizes and dimensions. Advantages of PE 100 Excellent processing capability High chemical resistance High corrosion resistance High abrasion resistance Excellent strength and rigidity High heat stability UV-stabilised (permanent outdoor use possible) Fields of application Machined fittings Miscellaneous finished parts Certificates Physiologically safe according to BfR (German Federal Institute for Risk Assessment) EU food conformity 10/2011 Materials used meet quality requirements of material lists issued by German Plastic Pipes Association KRV 180 Catalogue Semi-Finished Parts 2013

181 Material specifications Material specifications Density, g/cm 3, DIN EN ISO 1183 Elongation at yield, %, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m 2, DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Fire behaviour, DIN 4102 SIMONA PE , normal flaability Temperature range, C 50 to +80 Physiologically safe as per BfR Product range PE 100 Hollow Rods, black (length delivered: 2,000 ) Ø d i Weight a kg/pce Ø d i Weight a kg/pce b a All weights specified are considered to be theoretical values based on the nominal dimensions. Calculations are based on the effective weight de termined. b Available from first quarter of Special sizes available on request b b b b b b INFO +49 (0) engineering@simona.de 2013 Catalogue Semi-Finished Parts 181

182 7.8 SIMONA Profiles PE 80 Profiles, black W H s Weight kg/m s Square pipes Length: 5 m H W U-profiles Length: 5 m W s H PP Profiles, grey Square pipes Length: 5 m U-profiles Length: 5 m W H s Weight kg/m s H W s H W PPs Profiles, grey Square pipes Length: 5 m W H s Weight kg/m s H W Profiles in custom lengths available on request. s = Wall thickness 182 Catalogue Semi-Finished Parts 2013

183 7.9 SIMONA Tank Corners l SIMONA PE-HD Tank Corners, black Wall thickness Edge length l Weight kg/pce PU pce PU = Packaging unit SIMONA PP-H Tank Corners, grey Wall thickness Edge length l Weight kg/pce PU pce PU = Packaging unit SIMONA Tank Corners are a versatile solution for structural applications as well as repair purposes. Fields of application J Direct fitting to the walls of rectangular tanks to eliminate welding seams J Reinforcement for rectangular tanks by welding on the corners internally or externally J Repair corners for sealing corner areas of tanks J Corner element for seals J Impact protection in equipment engineering to avoid damage J Reinforcement for linings by welding corners to the tank from the inside J Supporting element for covers 2013 Catalogue Semi-Finished Parts 183

184 7.10 ATEX Products for explosive atmospheres (ATEX) Materials used in production equipment which is deployed in potentially explosive atmospheres must display properties that protect them against explosion, in compliance with Euro pean directives ATEX 94/9/EC and ATEX 137. SIMONA's electrically conductive products provide protection against static charging, thereby reducing the risk of explosion. SIMONA offers professional assistance in applications technology as well as training centred around the processing of SIMONA EL products. 184 Catalogue Semi-Finished Parts 2013

185 7.11 REACH REACH Regulation On 1 June 2007, the European chemicals law which had applied up to that date was replaced by the so-called REACH Regulation (EU Regulation 1907/2006/EC). REACH stands for Registration, Evaluation, Authorisation and Restriction of CHemicals. One of the rules specified by the REACH Regulation is that all substances (chemicals and preparations) which are manufactured in the EU or are imported to the EU have to be pre-registered and registered with the European Chemicals Agency (ECHA). The REACH Regulation applies to chemicals and preparations. Polymers are explicitly excluded from registration and evaluation (as per Article 2 Para. 9). The SIMONA range of products comprises semi-finished parts, pipes and fittings that are made solely of polymer materials. Therefore, they are not subject to the REACH Regulation. As a plastics processing company, we cannot have our products registered, nor are we obliged to. Within the scope of the supply chain described by REACH, plastics processing companies are so-called downstream users. One of our obligations as downstream users is to verify the fact that our own suppliers handle the raw materials delivered to us in a REACH-compliant manner. We met our obligations within this area during the pre-registration phase from If the availability of individual raw materials is limited by REACH in future, we will switch to REACH-compliant alternatives. In addition, we are obliged to dis close information about the constituents of our products: we confirm that our products do not contain any substances in con centrations of > 0.1 % (w/w) which are on the candidate list (Candidate List of Substances of Very High Concern, SVHC) issued by the European Chemicals Agency (ECHA). As downstream users, we are enjoined to inform our suppliers how the raw materials delivered to us are used. In our case, this includes the manufacture of semi-finished plastics, pipes, fittings and finished parts by means of extrusion, pressing and injection moulding. This represents the "identified use" of these materials. In order to improve the ex - change of information along the supply chain, it is advantageous to also receive information about how our customers subject our products to further processing. Please feel free to pass this information on to us by contacting reach@simona.de. For further information, please refer to the following website: INFO +49 (0) tsc@simona.de 2013 Catalogue Semi-Finished Parts 185

186 186 Catalogue Semi-Finished Parts 2013

187 8 Material Specifications Our products are regularly subjected to extensive technical assessments as well as endurance testing. As part of this prograe, our in-house laboratory conducts ongoing tests on material properties and long-term performance. Coitted to excellence, we can thus ensure premium-quality products at all times. Specifications 2013 Catalogue Semi-Finished Parts 187

188 8.1 PE Material specifications PE SIMONA PE-HWU SIMONA PE 100 SIMONA PE-HWST SIMONA PE-EL SIMONA PE-HML 500 dehoplast PE-500 dehoplast PE-1000 Technical data Density, g/cm 3, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO Elongation at yield, %, DIN EN ISO 527 Tensile modulus of elasticity, 900 1, ,300 1,100 1, MPa, DIN EN ISO 527 Impact strength, kj/m 2, no break no break no break no break no break no break no break DIN EN ISO 179 Notched impact strength, kj/m 2 DIN EN ISO 179 DIN EN ISO Ball indentation hardness, MPa, DIN EN ISO Shore hardness D, DIN EN ISO 868 Mean coefficient of linear 1.8 x x x x x x x 10 4 thermal expansion, K 1, DIN Thermal conductivity, W/m K, DIN Fire behaviour, DIN 4102 Dielectric strength, kv/, DIN IEC Specific surface resistance, Ohm, IEC Temperature range, C Chemical resistance Physiologically safe normal flaability normal flaability normal flaability normal flaability normal flaability normal flaability normal flaability > > > to to to to to to to + 80 excellent in contact with many acids, alkalis and solvents BfR EU FDA Processing Welding yes yes yes possible yes yes possible Gluing, GRP coating possible after pre-treatment Spray painting, printing possible after pre-treatment Warm bending good yes good possible possible possible limited 188 Catalogue Semi-Finished Parts 2013

189 8.2 PP Material specifications PP SIMONA PP-DWU AlphaPlus SIMONA PP-DWST SIMONA PP-EL-S SIMONA PPs SIMONA PP-C frisylen JN 480 Technical data Density, g/cm 3, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Elongation at yield, %, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Impact strength, kj/m 2, DIN EN ISO 179 Notched impact strength, kj/m 2, DIN EN ISO 179 Ball indentation hardness, MPa, DIN EN ISO Shore hardness D, DIN EN ISO 868 Mean coefficient of linear thermal expansion, K 1, DIN Thermal conductivity, W/m K, DIN Fire behaviour DIN 4102 normal flaability UL 94 Dielectric strength, kv/, DIN IEC Specific surface resistance, Ohm, IEC Temperature range, C Chemical resistance ,700 1,400 1,400 1,600 1,200 1,400 no break no break no break no break no break no break x x x x x x normal flaability normal flaability V-0: > 4 a low flaability 2 to 20 a normal flaability normal flaability > to to to to to to excellent in contact with many acids, alkalis and solvents Physiologically safe BfR EU FDA Processing Welding yes yes yes yes yes yes Gluing, GRP coating possible with backed sheets Spray painting, printing only possible after pre-treatment Warm bending good good good good good possible a Test certificate available 2013 Catalogue Semi-Finished Parts 189

190 8.3 PVC rigid Material specifications PVC rigid SIMONA PVC-CAW SIMONA PVC-MZ-COLOR SIMONA PVC-GLAS SIMONA PVC-C CORZAN Industrial Grade Technical data Density, g/cm 3, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Elongation at yield, %, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Notched impact strength, kj/m 2, DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Mean coefficient of linear thermal expansion, K 1, DIN Thermal conductivity, W/m K, DIN Fire behaviour DIN 4102 B1 low flaability 1 4 a ,300 3,100 3,300 2, x x x x B1 low flaability 1 4 b B1 low flaability 1 4 a B1 low flaability b UL 94 V-0: > 1 a V-0: > 1 a V-0: > 1 a NF P M1: 1 3 a M1: 1 3 a BS 476 Class 1: 3 a Class 1: 3 a Dielectric strength, kv/, DIN IEC Specific surface resistance, Ohm, IEC Temperature range, C 0 to to to to + 95 Chemical resistance excellent in contact with many acids and alkalis Physiologically safe no no no no Processing Welding yes yes yes yes Gluing, GRP coating yes yes yes yes Spray painting, printing yes yes yes yes Warm bending good good good good a Test certificate available b Company evaluation without test certificate 190 Catalogue Semi-Finished Parts 2013

191 8.4 PVC foamed Material specifications PVC foamed SIMONA SIMOPOR- LIGHT SIMONA SIMOPOR- ULTRALIGHT SIMONA SIMOPOR- COLOR SIMONA SIMOPOR- DIGITAL SIMONA COPLAST- AS SIMONA COPLAST- AS-X Technical data Density, g/cm 3, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO 527 Elongation at yield, %, DIN EN ISO 527 Tensile modulus of elasticity, MPa, DIN EN ISO 527 Flexural modulus of elasticity, MPa, DIN EN ISO 178 Impact strength, kj/m 2, DIN EN ISO 179 Shore hardness D, DIN EN ISO 868 Mean coefficient of linear thermal expansion, K 1, DIN Fire behaviour DIN 4102 B1 low flaability 1 19 a , ,100 1,100 1, ,400 1,100 1,400 1, normal flaability normal flaability B1 low flaability 3 10 a normal flaability, B1 low flaability 10 b normal flaability M1: M1: NF P M1: 3 10 a 3 10 a 10 b Specific surface resistance, Ohm, > > > > IEC Temperature range, C 0 to to to to to to + 60 Chemical resistance excellent in contact with many acids, detergents and alcohols Physiologically safe no no no no no no Processing Welding possible yes yes yes possible possible Gluing, GRP coating yes yes yes yes yes yes Spray painting, printing yes yes yes excellent yes yes Warm bending good good yes good possible possible a Test certificate available b Test certificate on request 2013 Catalogue Semi-Finished Parts 191

192 8.5 PETG, PVDF, E-CTFE Material specifications PETG, PVDF, E-CTFE SIMONA SIMOLUX (PETG) SIMONA PVDF SIMONA E-CTFE Technical data Density, g/cm 3, DIN EN ISO 1183 Yield stress, MPa, DIN EN ISO B1 low flaability b B1 low flaability b Elongation at yield, %, DIN EN ISO 527 Tensile modulus of elasticity, MPa, 1,900 1,950 1,650 DIN EN ISO 527 Impact strength, kj/m 2, no break no break no break DIN EN ISO 179 Notched impact strength, kj/m no break DIN EN ISO 179 Ball indentation hardness, MPa, DIN EN ISO Shore hardness D, DIN EN ISO 868 Mean coefficient of linear thermal 0.7 x x x 10 4 expansion, K 1, DIN Thermal conductivity, W/m K, DIN Fire behaviour DIN 4102 B1 low flaability 1 8 a FM 4910 fulfilled Dielectric strength, kv/, DIN IEC Specific surface resistance, Ohm, IEC Temperature range, C 40 to to to +150 Chemical resistance on request excellent chemical resistance to almost all chemicals extremely good chemical resistance, also in the alkaline range Physiologically safe BfR EU FDA Processing Welding yes yes yes Gluing, GRP coating yes possible with backed sheets possible with backed sheets Spray painting, printing yes possible after pre-treatment Warm bending excellent good possible a Test certificate available b Company evaluation without test certificate 192 Catalogue Semi-Finished Parts 2013

193 2013 Catalogue Semi-Finished Parts 193

194 194 Catalogue Semi-Finished Parts 2013

195 9 Services As a customer, you always take centre stage: from project development to materials procurement and on-site plan - ning, we are coitted to providing the very best con sulting services. Our long-standing experience is your gain. Services 2013 Catalogue Semi-Finished Parts 195

196 Customised solutions for your applications We are coitted to offering our customers an extensive range of customised solutions so that they can compete successfully with - in the business arena. SIMONA can draw on many years of experience in the manufacture of sheets, pipes and fittings. Pro - viding in-depth knowledge and significant technical exper tise, we are acknowledged as a reliable and trustworthy partner. Our Technical Service Centre team looks forward to assisting you: Phone +49 (0) Fax +49 (0) tsc@simona.de Exceptional versatility SIMONA products are used for a wide range of applications: J Chemical tank and equipment engineering J Piping systems (e.g. municipal and utility installations) J Linings and composite construction J Mechanical engineering J Transport, materials handling and storage technology J Food industry J Bulk-handling industry J Port and marine fender industry J Trade fair and display design J Structural engineering J Automotive sector J Orthopaedics and medical engineering Excellent properties Applying our state-of-the-art process technology and unrivalled technical expertise, we are ca p- able of adapting the properties of materials for the purpose of further improving the key benefits delivered by high-end plastics: J Cost-effectiveness J Chemical resistance J Resistance to diffusion J Stress crack resistance J Corrosion resistance J Excellent processing properties 196 Catalogue Semi-finished Parts 2013

197 Customised solutions At SIMONA, customising extends far beyond the supply of tailormade formats, colours and dimensions. Alongside the extensive range of materials available within our portfolio, we have the necessary expertise to develop new or modified materials with specialist properties that are tailored to your requirements and form the basis for customised product solutions. Post-processing of sheets In addition to supplying sheets in standard thicknesses and sizes, we also offer customised postprocessing for pressed and extruded sheets: J Sheets in customised lengths and thicknesses J Contour-cut sheets J Sheets with die-cut, milled or drilled segments J Surface treatment, e.g. planing Customised pipes and fittings J Pipes in various lengths for a range of joining methods J Special pipe sizes adapted to the standard nominal dia meters of other materials J Pipes with non-standard properties such as electrical conductivity or low flaability J Customised fittings as system components for your application Customised design Equipped with state-of-the-art CNC lathes and milling systems and boasting decades of experience in specialist machining, we are able to produce high-precision finished parts tailored to your specific requirements. Innovative solutions Drawing on our extensive expertise, we have already developed a number of highly innovative products, e. g.: J SIMONA PE Multilayer Sheets for tanks used in the automotive industry J SIMONA Twin-Wall Sheets made of PE, PP, PPs and PP-C-UV capable of withstanding high structural loads J SIMONA Eco-Ice Sheets made of PE for ice rinks and offering significant energy savings Disposal service We can also dispose of your processing waste. An essential prerequisite is that all waste collected must be of the same material. Please feel free to contact a member of our staff. We look forward to presenting our disposal service to you and discussing a solution tailored to your business requirements. INFO Discover the versatility of SIMONA products: Catalogue Semi-Finished Parts 197

198 Consulting and information service We offer global consulting services, headed by highly qualified staff at our Technical Service Centre and within our sales orga nisation from project coordination through product and mate rial selection to on-site planning. In addition to assisting you with the selection of products and materials, as well as advising you on structural design, processing, special sizes and customised product development, we are able to offer you an extensive consulting service in the following areas of application: Tank and apparatus construction J Estimates and verifiable structural properties for rectangular tanks (full-perimeter reinforcements, cross-ribbed) and cylindrical tanks according to DVS 2205 J Structural calculations for shafts and tanks J Structural calculation of SIMONA Twin-Wall Sheets in cooperation with LGA, Nuremberg Lining and composite construction J Selection of backing material J Lining technology J Welding processes J Bonding methods or selection of reaction resin Piping systems J Installation methods J Structural calculations J Joining techniques J Structural analysis for underground pipes, landfill drainage pipes, shafts and ventilation systems J Professional and comprehensive project management Mechanical and transport engineering J Customised, applicationspecific manufacture of finished parts J CAD/CAM expertise J CNC lathe and milling centres J Profiling and other processing machines 198 Catalogue Semi-finished Parts 2013

199 Materials testing Our products are subjected to a range of thorough technical assessments as well as endurance testing. As part of this prograe, our in-house laboratory conducts ongoing tests on material properties and longterm performance. J Iersion tests according to DIN Part 1 2 and ISO 4433 Part 1 4 J Evaluation of reduction factors through iersion tests or internal pressure creep rupture tests J Probability analysis regarding stress cracks induced by liquids J Assessment of permeation for applications in composite construction and lining technology with corresponding material recoendation SIMONA Sales Academy More than 1,000 customers and business partners have already benefited from the special training prograes offered by SIMONA. We are coitted to expand ing and enhancing this service with the help of the newly created SIMONA Sales Academy. Our general seminar prograe covers basic topics relating to the respective business units. Those new to this field are given a thorough insight into thermoplastics, combined with an overview of the various processing methods in theory and practice. SIMONA Sales Academy lecturers are professionals from within the company with consider - able expertise and experience at a practical level. For larger groups of attendees, we are also able to offer you customised training prograes tailo red specifically to your requirements. Finally, our educational ser vice includes colloquia focusing on innovation and topics of interest for the future, such as tank and apparatus construction or piping systems. Our modern educational facilities and our Technology Centre are well equipped to provide the very best in training. Upon request, we can also provide training at your own premises. Contact: Phone +49 (0) Fax +49 (0) salesacademy@simona.de Information service Further information about our products is available in the form of J catalogues, J brochures, J product flyers, J case studies and project reports, J DVDs, J detailed tendering docu - mentation, as well as, J forms for the purpose of structural or chemical resistance calculations. This information is provided free of charge: Phone +49 (0) Fax +49 (0) marketing@simona.de INFO Find out more about SIMONA and visit us online at: Catalogue Semi-Finished Parts 199

200 SIMONA Scrapers Professional welding in accordance with DVS Correct welding is demonstrated at the SIMONA Technology Centre. Welding of plastics Plastic welding refers to the permanent joining of thermoplastics by applying heat and pressure, with or without the use of additional materials. All welding processes are per - formed when the materials in the boundary areas of the surface being joined are in a ductile state. Here, the linear molecules of the parts being joined and pressed together link up and entwine to form a homogeneous material bond. Only plastics of the same category, e.g. PP and PP, and within these groups only those with identical or similar (adjacent) molecular weight and the same density, can be welded to one another; colour does not have to be taken into account. One exception to this rule is the bonding of rigid PVC to acrylic glass, where the strength of the welded seam is satisfactory. D Kirn 3,5ø 4,5ø 5,5ø 90 Scrapers are an indispensable tool within the area of high-quality hotgas welding. Examples of weld structure in accordance with DVS, angle of 60 (single V) Sheet thickness Welding rod Quantity x Diameter in 2 1 x x x x x Catalogue Semi-finished Parts 2013

201 SIMONA SIMCHEM Guide to chemical resistance SIMCHEM is a comprehensive and reliable guide when it comes to determining the chemical resistance of materials used in our products. It has been designed to provide you with key information to assist you in your dayto-day operations. SIMCHEM comprises a list of 4,000 substances and proprietary products. Additionally, it offers valuable information about our materials and the general properties of plastics. SIMCHEM a database on the chemical resistance of SIMONA materials, featuring more than 4,000 listed substances. After six CD-ROM editions, we have now launched a fully revised online version of SIMCHEM. The full range of information previously accessible via the installed CD version can now be accessed online at any time by all users. Additionally, registered users can also take advantage of extended features, e.g. a tool to generate a PDF file of search results. Those who prefer using an offline solution are able to download a version of the application that includes an online update function. All information contained in this database reflects our current scope of knowledge at the date of publication and is based on the findings from iersion testing as part of which test specimens were subjected to different temperatures in the medium in question, free from external stresses. The data derived from testing is complemented by case study reports, recoendations by raw material manufacturers as well as extensive data relating to standards, directives and guidelines. INFO The free online version of SIMCHEM is available from: Catalogue Semi-Finished Parts 201