LIMITED WARRANTY. Some products and sizes may be discontinued when stock is depleted, or may require a minimum quantity for ordering.

Transcription

1 LIMIT WRRNTY radford, a division of ixon Valve and oupling ompany, (herein called "radford") warrants the products described herein, and manufactured by radford to be free from defects in material and workmanship for a period of one () year from date of shipment by radford under normal use and service. It's sole obligation under this warranty being limited to repairing or replacing, as hereinafter provided, at its option any product found to radford's satisfaction to be defective upon examination by it, provided that such product shall be returned for inspection to radford within three () months after discovery of the defect. The repair or replacement of defective products will be made without charge for parts or labor. This warranty shall not apply to: (a) parts or products not manufactured exclusively for radford, the warranty of such items being limited to the actual warranty extended to radford by its supplier; (b) any product that has been subject to abuse, negligence, accident, or misapplication; (c) any product altered or repaired by others than radford; and (d) to normal maintenance services and the replacement of service items (such as gaskets and seats) made in connection with such services. To the extent permitted by State law, this limited warranty shall extend only to the buyer and any other person reasonably expected to use or consume the goods who is injured in person by any breach of the warranty. No action may be brought against radford for an alleged breach of warranty unless such action is instituted within one () year from the date the cause of action accrues. This limited warranty shall be construed and enforced to the fullest extent allowable by applicable State law. OTHR THN TH OLIGTION OF RFOR ST FORTH HRIN, RFOR ISLIMS LL WRRNTIS, XPRSS OR IMPLI, INLUING UT NOT LIMIT TO NY IMPLI WRRNTIS OF MRHNTILITY OR FITNSS FOR PRTIULR PURPOS, N NY OTHR OLIGTION OR LIILITY. TH FORGOING ONSTITUTS RFOR'S SOL OLIGTION WITH RSPT TO MGS, WHTHR IRT, ININTL OR ONSQUNTIL, RSULTING FROM TH US OR PRFORMN OF TH PROUT. Some products and sizes may be discontinued when stock is depleted, or may require a minimum quantity for ordering. NOT: Reasonable care has been taken in preparing this catalog. radford, a division of ixon Valve & oupling ompany, reserves the right to make corrections and any dimensional changes.

2 Trademarks endix is a registered trademark of mphenol orp. Hirschmann is a registered trademark of Richard Hirschmann of merica Inc. Lexan is a registered trademark of G Plastics. Pyrex is a registered trademark of orning Glass. is a registered trademark of.i. dupont Nemours and ompany. Tri-lamp is a registered trademark of Tri-lover, Inc. is a registered trademark of upont ow lastomers. Measurement Information Measures of Pound Per Square Inch = 44 Pounds Per Square Foot = tmosphere = Inches of Mercury at 62 F =2. Inches of Water at 62 F = 2. Feet of Water at 62 F. tmosphere = 0 Inches of Mercury at 62 F = 4. Pounds Per Square Inch = 2. Pounds Per Square Foot =.9 Feet of Water at 62 F. Foot of Water at 62 F = 62. Pounds Per Square Foot = 0.4 Pounds Per Square Inch. Inch of Mercury at 62 F =. Feet of Water =.8 Inches of Water = 0.49 Pounds Per Square Inch. olumn of Water 2 Inches High, Inch in iameter =.4 Pounds Length onversion onstants Millimeters x.090 = Inches Meters x 9.0 = Inches Meters x.2808 = Feet Meters x.096 = Yards Kilometers x,280.8 = Feet Kilometers x.62 = Statute Mile Kilometers x.99 = Nautical Miles Inches x = Millimeters Inches x.024 = Meters Feet x.0480 = Meters Yards x.9440 = Meters Feet x = Kilometers Statute Miles x.609 = Kilometers Nautical Miles x.8 = Kilometers Weight onversion onstants Grams x.02 = Ounces (vd.) Grams x.088 = Fluid Ounces (Water) Kilograms x.2 = Ounces (vd.) Kilograms x = Pounds (vd.) Ounces (vd.) x 28. = Grams Fluid Ounces (Water) x 29. = Grams Ounces (vd.) x.028 = Kilograms Pounds (vd.) x.49 = Kilograms lastomer Information asic lastomer and Thermoplastic haracteristics MTRIL una PM Temperature -6 to 20 F -60 to 00 F -40 to 40 F -40 to 22 F -40 to 40 F cid to xcellent to xcellent to xcellent Poor to lkali Fair to to xcellent Poor to xcellent Poor to Fair Fats/Oils to xcellent Poor to xcellent xcellent Poor to Taste xcellent Odor xcellent brasion Resistance xcellent Fair ompression Set Fair to xcellent old Flows to xcellent epends on the type of oil radford 2004 atalog

3 Guideline for ompound Selection for Use with Various Fluids and hemicals Note: The information contained in these tables was derived from several sources and is to be used as a general guide only. ompounds suitable for any specification application rests solely by the end user. radford assumes no responsibility. - satisfactory - fair - severe effect; except for some static applications - unsatisfactory - insufficient information FLUI una PM FLUI una PM cetaldehyde cetamide cetic cid, 0% cetone cetophenone cetyl hloride cetylene crylonitrile dipic cid mmonia Gas (cold) mmonium horide (aq) mmonium Hydroxide (conc.) mmonium Nitrate (aq) mmonium Nitrite (aq) mmonium Phospate (aq) mmonium Sulfate (aq) myl cetate (anana Oil) myl lcohol myl orate rsenic cid rsenic Trichloride (aq) arium hloride (aq) arium Hydroxide (aq) arium Sulfate (aq) arium Sulfide (aq) enzaldehyde enzene enzoic cid enzoyl hloride enzyl lcohol enzyl hloride oric cid rine romine, nhydrous romine Water utadiene utane utyl cetate utyl cetyl Ricinoleate utyl lcohol utyl mine utyl enzoate utyl arbitol utyl ellosoive utyl Oleate utyl Stearate utylene utyraldehyde arbolic cid (Phenol) arbon isulfide arbon ioxide arbonic cid arbon Monoxide arbon Tetrachloride astor Oil ellosoive cetate hina Wood Oil (Tung Oil) hlorine (wet) hlorine ioxide hloroacetic cid hloroacetone hlorobenzene hlorobromomethane hloroform hlorotoluene hrome Plating Solutions hromic cid od Liver Oil opper cetate (aq) opper hloride (aq) opper yanide (aq) opper Sulfate (aq) reosote (coal tar) resylic cid yclohexane yclohexanol yclohexanone enatured lcohol radford 2004 atalog

4 200 radford 2004 atalog FLUI PM una thyl ther thyl Pentachlorobenzene thylene thylene hloride thylene iamine thylene ichloride thylene Glycol Fluoroboric cid Freon Freon 2 Freon 22 Fumaric cid Gallic cid Gasoline Glucose Glycerin Hexane Hexyl lcohol Hydrazine Hydrobromic cid Hydrocyanic cid Hydrofluoric cid (conc.) cold Hydrofluosilicic cid Hydrogen Gas Hydrogen Peroxide (90%) Hydrogen Sulfide (wet) cold Hydroquinone Iodoform Isobutyl lcohol Isooctane Isopropyl cetate Isopropyl lcohol Isopropyl hloride Isopropyl ther Kerosene Lacquers Lactic cid (cold) Lead cetate (aq) Lead Nitrite (aq) Lime leach Linoleic cid Maleic cid Malic cid Methane Methyl cetate Methyl crylate FLUI PM una etergent Solutions iacetone lcohol ibenzyl ther ibenzyl Sebecate ibromoethyl enzene (lkazene) ibutyl mine ibutyl ther ibutyl Phthalate ibutyl Sebecate O-ichlorobenzene ichloro-isopropyl ther iethylamine iethyl enzene iethyl ther iethylene Glycol iethyl Sebecate iisobutylene iisopropyl enzene iisopropyl Ketone iisopropylidence cetone imethyl niline (Xylidine) imethyl ther (Methyl ther) imethyl Formamide imethyl Phthalate initrotoluene ioctyl Phthalate ioctyl Sebecate ioxane ioxolane ipentene iphenyl (Phenylbenzene) iphenyl Oxides owtherm Oil thane thanolamine thyl cetate thyl cetoacetate thyl crylate thyl lcohol thyl enzene thyl enzoate thyl ellosoive thyl ellulose thyl hloride thyl hlorocarbonate thyl hloroformate

5 20 radford 2004 atalog Information compiled from Newman Gaskets website, FLUI PM una i-propyl cetate Propyl Nitrate Propylene Pyridine Salicylic cid Oils Soap Solutions Sodium cetate (aq) Sodium icarbonate (aq) (baking soda) Sodium orate (aq) Sodium hloride (aq) Sodium Hydroxide (aq) Sodium Nitrate (aq) Sodium Peroxide (aq) Soybean Oil Steam, under 00 F Stearic cid Stoddard Solvent Sulfur hloride (aq) Sulfuric cid (dilute) Sulfurous cid Tannic cid Tartaric cid Tetrachloroethylene Toluene Triethanol mine Trioctyl Phosphate Tung Oil (hina Wood Oil) Turpentine Vegetable Oils Vinegar Whiskey, Wines White Pine Oil Zinc hloride (aq) FLUI PM una Methylacrylic cid Methyl lcohol Methyl romide Methyl utyl Ketone Methyl ellosoive Methyl hloride Methyl yclopentane Methylene hloride Methyl ther Methyl thyl Ketone Methyl Isobutyl Ketone Methyl Methacrylate Milk Mineral Oil Monoethanol mine Monomethyl ther Monovinyl cetylene Mustard Gas Naphthalenic cid Natural Gas Nickel cetate (aq) Nickel hloride (aq) Nickel Sulfate (aq) Nitric cid (dilute) Nitrobenzene (Ligroin) Nitroethane Nitrogen Tetroxide Octachlorotoluene Octadecane N-Octane Octyl lcohol Oleic cid Oxalic cid Oxygen - old Ozone Palmitic cid Perchloric cid Phenyl thyl ther Phosphoric cid - 20% Phosphorus Trichloride Piperidine Polyvinyl cetate mulsion Potassium cetate (aq) Potassium hloride (aq) Potassium yanide (aq) Potassium Nitrate (aq)

6 202 radford 2004 atalog Fraction - ecimal onversion hart Millimeters Inches Millimeters Inches

7 Finish Information Finish esignations for Tubing and Fittings Finish Number Finish onditions Mill Finish (bright annealed, pickled, sand blast or tumbled) Polished 80 grit inside diameter (I) only Polished 0 grit outside diameter (O) only Polished 80 grit outside/inside diameter (O/I) Polished 0 grit outside (O), 80 grit inside diameter (I) Finish Specifications PROSS R micro inch R micron ISO designation 0 grit N6 0 grit + lectropolish grit grit + lectropolish grit N 240 grit + lectropolish grit N4 0 grit + lectropolish Note: dditional improvements to the surface finish require buffing and further electropolishing. The effect of electro polishing is to improve the existing surface by 0%. radford 2004 atalog

8 Tubing Information omparison of Tolerances for Welded Tubing STM-269 Unpolished Tube O Size Nominal O.. Tolerance Tolerance Ovality llowance ½" ±.00 0 ¾" ± " ± ½" ± " ± ½" ± " ± ".08 ± ".09 ±.00 ± ".20 ±.040 ± STM Welded ustenitic Stainless Steel Tubing for General Service STM-20 Polished O & I Tube O Size Nominal O.. Tolerance Tolerance Ovality llowance " +.002/-.008 ½" +.002/ " +.002/-.0 2½" +.002/-.0 " +.00/-.02 4" /-.0 ±.00 STM Welded ustenitic Stainless Steel Sanitary Tubing Ovality can not exceed the O range - marking Note: radford tubing that carries the - symbol conforms to the sanitary standards for polished metal tubing for milk and milk products radford 2004 atalog

9 Tubing Information Operating s 04 Stainless Steel Tube Tube O Size Nominal Working Yield urst ½" 4,880,800 9,00 ¾",20,200,000 " 2,440,900 9,800 ½",60 2,600 6,00 2",220 2,000 4,900 2½" 980,600,900 " 80,00,00 4".08 80,200,00 6" ,00 2,00 8" ,000 The pressures shown in the table are calculated using arlow's Formula and the following properties: Material - 04 Yield Strength () - 0,000 Tensile Strength () -,000 Working = ¼ of urst. These calculate from -20 F to 00 F. L Stainless Steel Tube Tube O Size Nominal Working Yield urst ½" 4,0 6,00 8,200 ¾",00 4,00 2,00 " 2,280,00 9,00 ½",20 2,200 6,00 2",40,600 4,600 2½" 90,00,600 " 60,00,000 4".08 0,000 2,900 6" ,00 8" ,900 The pressures shown in the table are calculated using arlow's Formula and the following properties: Material - L Yield Strength () - 2,000 Tensile Strength () - 0,000 Working = ¼ of urst. These calculate from -20 F to 00 F. radford 2004 atalog