Interconnect Solutions Worldwide DERIVED HIGH POWER CONNECTORS

Transcription

1 38999 DERIVED HIGH POWER CONNECTORS

2 POLAMCO HIGH POWER CONNECTORS The Polamco High Power Connector range offers a simple and effective way of terminating power cables in a harsh environment military connector system. The product covers cable sizes from mm² up to mm² and is available in shell sizes to depending on the cable being terminated. It is available with threaded termination, or a screened crimp with a straight or 90 outlet options. Key Features Up to 1000A capability Rugged 38999* derived connector shell systems Easy assembly Many shell styles and termination options available Conductive Jam Nut O-Ring option available Simple adjustment of angled backshells (no special tooling) Low mating force Technical Features Materials & Plating Optons Shell Contact ody Plating finishes Insulators Seals Aluminium Alloy, Nickel Aluminium ronze, Stainless Steel Copper Alloy - Silver plated Cadmium Olive Drab, lack Zinc Nickel, Electroless Nickel. Others available on request. Thermoplastic - PPS-GL40-UL94V-O Silicone Elastomer Plating Code C Z ZN ZK Plating Description Cadmium, Olive Drab (5-10 Microns) QQ-P-416, Type II, Class 3 over Electroless Nickel Electroless Nickel, AMS-C-26074, Class 4, Grade Zinc Cobalt (5-10 Microns) over Electroless Nickel ( Microns) with an Olive Drab Chromate Conversion Zinc Nickel lack Passivate (5-12 Microns) over Electroless Nickel (8-12 Microns), ASTM 841 Class 1 Zinc Cobalt (5-10 Microns) over Electroless Nickel ( Microns) with a black chromate conversion ROHS Compliant No** Yes Yes Yes Yes Environmental Protection Conductivity Conductive 0 Hours Salt Spray Conductive 48 Hours Salt Spray Conductive 3 Hours Salt Spray Conductive 0 Hours Salt Spray Conductive 0 Hours Salt Spray * This Polamco connector has not been qualified by the U.S. Defence Logistics Agency and does not appear on its Qualified Product List. **Many Military Programs are exempt from ROHS compliance, see ROHS website for more information 2 Tel: +44 (0)

3 POLAMCO HIGH POWER CONNECTORS Mechanical Mechanical Endurance Vibration Shock 0 Mating Cycles Def-Stan 0035 part 3. 6hrs in 3 axis (with full current load) 0m/s², 11ms half sine. Electrical Test Voltage 1800V AC RMS 60Hz (service rating 1) Shell Continuity <5mΩ (dependent of plating finish) Current Rating Approximate Current 40 o C Ambient Crimp Contact Current De-Rating Shell Size Current Contact Resistance 1000A <22µΩ A <µω 600A <30µΩ 400A <38µΩ See Chart for current de-rating values for each crimp contact size. Note! It is important that a suitably rated cable for current and temperature is used with this connector. Cables should be supported a maximum of 2mm from the back of the connector. Environmental Sealing Salt Spray Temperature Range IP68 (2m for ½ hour) 0 hrs* -65 C to +175 C * dependent on material and finish Drawings, illustrations and schematics are intended for illustration purposes only. Polamco Ltd. makes not representation and gives no warranties or guarantees as to the accuracy or completeness of the information provided herein and disclaims any liability in connection with its use. Polamco Ltd. s obligations shall only be as set forth in Polamco Ltd s Terms of Sale and in no case will Polamco Ltd. be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the products or information described in herein. Users of Polamco Ltd. s products should make their own evaluation to determine the suitability of each such product for the specific application. Tel: +44 (0)

4 38999 III DERIVED HIGH POWER CONNECTORS asic Part Numbering Series Shell Style 20HP = Square Flange 24HP = Jam Nut 26HP = Plug 20HPF = Square Flange ulkhead Feedthrough 24HPF = Jam Nut ulkhead Feedthrough AT= Anti Tamper (PLUG ONLY) Rear Termination T = screened backshell F = Female Threaded M = Male Threaded post (also available) Angle entry Does not apply to threaded contacts 1 = Straight 3 = 90 Shell size Crimp arrel Does not apply to threaded contacts,, etc Cable Stranding FS = Fine stranding (Hi Flex) S = Standard stranding Contact Type P = Pin S = Socket Key Arrangement N, A,, C, D, E Material and Finish Optional Panel thickness in mm Omit for standard PC420HP(AT)-T1--FS-SN-1-C-L13 See individual datasheets for more information Tel: +44 (0)

5 38999 III DERIVED HIGH POWER CONNECTOR Panel Cutout Information See individual drawings for further information Jam Nut Receptacles Square Flange Receptacles D - TYPICAL ØT ne ØH F Size E + 0. F Size D T H Min Tel: +44 (0)

6 SHIELDED STRAIGHT CRIMP PLUG LIP FOR HEATSHRINK OOT 71,3 `1,0 LIP FOR HEATSHRINK OOT 71,3 `1,0 n A - THREAD A - THREAD nc nc CRIMP MAX CORE DIAMETER STANDARD MAX CORE DIAMETER FINE STRAND SHELL ø ø C MAX MAX 35 X CORE DIAMETERMAX CORE DIAMETER 10,0 10,3 MAX CRIMP MAX CRIMP A THREAD TANDARD FINE STRAND SHELL ø ø C 1,20 38, 27,60 11,3 CLASS 12,1 2A MAX MAX STANDARD 1,37 FINE STRAND 41, 31,10 13,5 14,2 23 1,00 44,90 36,00 10,0 10,3 15,2 1,20 16,5 38, 27,60 11,3 12,1 1,62 48,00 39,84 16,7 1,37 17,6 41, 31,10 13,5 14,2 23 1,00 44,90 36,00 15,2 16,5 16,7 17,6,1 1,62 NA 48,00 39,84 WHERE CORE DIAMETER EXCEEDS THE MAXIMUM, POLAMCO,1 RECOMMENDS NA THE USE OF A SUITALE PRE-ROUNDING DIE TO AID INSERTION INTO THE CRIMP ARREL. FOR FURTHER GUIDANCE SEE POLAMCO ASSEMLY IAMETER EXCEEDS THE INSTRUCTION MAXIMUM, POLAMCO - ASQAW06. HE USE OF A SUITALE PRE-ROUNDING DIE N INTO THE CRIMP ARREL. UIDANCE SEE POLAMCO ASSEMLY SQAW06. STRAIGHT ENTRY SCREENED ACKSHELL STRAIGHT ENTRY CRIMP S = STANDARD FS = FINE STRAND MIL-DTL STYLE CONNECTOR CRIMP S = STANDARD S FS = FINE STRAND CONTACT - SILVER PLATED COPPER AND - () / PLATING VOLTAGE RATING 1000Va.c. / 1410Vd.c AND - (SEE 1-TALE) ALUMINIUM / CADMIUM OLIVE DRA OVER ELECTROLESS NICKEL MAX CONTACT RATING 1-Z / PLATING ALUMINIUM / ZINC COALT OLIVE DRA OVER ELECTROLESS NICKEL 23 = 800A 1-C ALUMINIUM / ELECTROLESS 1-ZN ALUMINIUM NICKEL / ZINC NICKEL LACK PASSIVATE OVER ELECTROLESS NICKEL = 600A 1- ALUMINIUM / CADMIUM OLIVE 4-J DRA OVER ELECTROLESS STAINLESS NICKEL STEEL / PASSIVATE = 400A 1-Z ALUMINIUM / ZINC COALT OLIVE 2-Z DRA OVER ELECTROLESS NICKEL ALUMINIUM NICKEL RONZE / SHOT LAST 1-ZN ALUMINIUM / ZINC NICKEL LACK LIST PASSIVATE NOT EXHAUSTIVE, OVER ELECTROLESS FOR COMPREHENSIVE NICKEL LIST AND SPECS, SEE WESITE DRAWN R.S. 2-Z 27/01/2016 NICKEL ALUMINIUM RONZE / SHOT LAST LIST NOT EXHAUSTIVE, FOR COMPREHENSIVE PC426HP-T1-**-*****-**-*-* LIST AND SPECS, SEE WESITE P.M. 27/01/ M.PAUL PART /08/2014 NUMER: ALL DIMENSIONS IN MILLIMETRES TITLE: GENERAL PC426HP-T1-**-*****-**-*-* TOL 16 PROD SHIELDED HIGH POWER PLUG, CRIMP CONTACT 6 Tel: +44 (0) PULISHING - FOR THE MOST UP-TO- VERSIONS PLEASE REFER TO THE INDIVIDUAL DATASHEETS 14 ALL DIMENSIONS IN MILLIMETRES TITLE: A A THREAD CLASS 2A PC426HP-T1--FS-PN-1-C PC426HP-T1--FS-PN-1-C SCREENED ACKSHELL SHIELDED HIGH POWER PLUG, CRIMP CONTACT MAX CRIMP STANDARD MAX CRIMP FINE STRAND

7 HIGH POWER CRIMP PLUG Anti Tamper LIP FOR HEATSHRINK OOT 71,5 `1,0 n A - THREAD nc SHELL A THREAD CLASS 2A ø MAX ø C MAX MAX CRIMP STANDARD MAX CRIMP FINE STRAND 1,20 44,00 27,60 1,37 48,00 31, ,00 52,00 36,00 1,62 55,40 39,84 ANTI TAMPER LOCKING SCREW AFTER TIGHTENING, USE THE 2mm ALLEN KEY TO FULLY LOOSEN THE LOCKING SCREW AS FAR AS IT WILL GO WITHOUT FORCING IT. THE OUTER PART OF THE NUT WILL NOW E FREE TO ROTATE WITHOUT RELEASING THE CONNECTOR. NOTE THAT THE LOCKING SCREW IS CAPTIVE AND CANNOT E REMOVED FROM THE NUT. TO RELEASE THE NUT, RE-TIGHTEN THE LOCKING SCREW TO LOCATE ON AN INTERNAL FLAT IN THE NUT ODY. DO NOT OVER TIGHTEN - LIGHT PRESSURE IS SUFFICIENT TO ALLOW THE NUT TO E REMOVED. 7 CRIMP 35 MAX CORE DIAMETER STANDARD 10,0 11,3 13,5 15,2 16,7,1 MIL-DTL STYLE CONNECTOR S CONTACT - SILVER PLATED COPPER VOLTAGE RATING 1000Va.c. / 1410Vd.c MAX CONTACT RATING 23 = 800A = 600A = 400A DRAWN R.S. 05/08/2016 P.M. 05/08/2016 M.PAUL 02/02/2016 ALL DIMENSIONS IN MILLIMETRES PROD Tel: +44 (0) ISSUE REV. DCR MAX CORE DIAMETER FINE STRAND 10,3 12,1 14,2 16,5 17,6 NA WHERE CORE DIAMETER EXCEEDS THE MAXIMUM, POLAMCO RECOMMENDS THE USE OF A SUITALE PRE-ROUNDING DIE TO AID INSERTION INTO THE CRIMP ARREL. FOR FURTHER GUIDANCE SEE POLAMCO ASSEMLY INSTRUCTION - ASQAW06. TITLE: HIGH POWER CRIMP PLUG, ANTI TAMPER ASSY USED ON: D38999/26 SUPPLIED WITH A 2MM ALLEN KEY PC426HP-AT-T1--FS-PN-1-C ANTI-TAMPER NUT SCREENED ACKSHELL STRAIGHT ENTRY CRIMP S = STANDARD FS = FINE STRAND AND - () / PLATING 1-Z ALUMINIUM / ZINC COALT OLIVE DRA OVER ELECTROLESS NICKEL 2-Z NICKEL ALUMINIUM RONZE / SHOT LAST LIST NOT EXHAUSTIVE, FOR COMPREHENSIVE LIST AND SPECS, SEE WESITE PC426HP-AT-T1-**-*****-**-*-* PULISHING - FOR THE MOST UP-TO- VERSIONS PLEASE REFER TO THE INDIVIDUAL DATASHEETS

8 HIGH POWER 90 O CRIMP PLUG Anti Tamper 82,75 MAX n REMOVALE END CAP A - THREAD LASER PART/ATCH MARK HERE 65, MAX LIP FOR HEATSHRINK OOT 8 SHELL CRIMP 35 A THREAD CLASS 2A nc ø MAX MAX CORE DIAMETER STANDARD 10,0 11,3 13,5 15,2 16,7,1 MIL-DTL STYLE CONNECTOR S CONTACT - SILVER PLATED COPPER VOLTAGE RATING 1000Va.c. / 1410Vd.c MAX CONTACT RATING 23 = 800A = 600A = 400A ø C MAX MAX CRIMP STANDARD MAX CORE DIAMETER FINE STRAND 10,3 12,1 14,2 16,5 17,6 NA DRAWN R.S. 05/08/2016 P.M. 05/08/2016 Tel: +44 M.PAUL (0)1222/02/ ALL DIMENSIONS IN MILLIMETRES PROD MAX CRIMP FINE STRAND 1,20 44,00 27,60 1,37 48,00 31, ,00 52,00 36,00 1,62 55,40 39,84 WHERE CORE DIAMETER EXCEEDS THE MAXIMUM, POLAMCO RECOMMENDS THE USE OF A SUITALE PRE-ROUNDING DIE TO AID INSERTION INTO THE CRIMP ARREL. FOR FURTHER GUIDANCE SEE POLAMCO ASSEMLY INSTRUCTION - ASQAW06. TITLE: ANTI TAMPER LOCKING SCREW AFTER TIGHTENING, USE THE 2mm ALLEN KEY TO FULLY LOOSEN THE LOCKING SCREW AS FAR AS IT WILL GO WITHOUT FORCING IT. THE OUTER PART OF THE NUT WILL NOW E FREE TO ROTATE WITHOUT RELEASING THE CONNECTOR. NOTE THAT THE LOCKING SCREW IS CAPTIVE AND CANNOT E REMOVED FROM THE NUT. TO RELEASE THE NUT, RE-TIGHTEN THE LOCKING SCREW TO LOCATE ON AN INTERNAL FLAT IN THE NUT ODY. DO NOT OVER TIGHTEN - LIGHT PRESSURE IS SUFFICIENT TO ALLOW THE NUT TO E REMOVED. SUPPLIED WITH A 2MM ALLEN KEY PC426HP-AT-T3--FS-PN-1-C ANTI-TAMPER NUT SCREENED ACKSHELL 90 ENTRY CRIMP S = STANDARD FS = FINE STRAND AND - () / PLATING 1-Z ALUMINIUM / ZINC COALT OLIVE DRA OVER ELECTROLESS NICKEL 2-Z NICKEL ALUMINIUM RONZE / SHOT LAST LIST NOT EXHAUSTIVE, FOR COMPREHENSIVE LIST AND SPECS, SEE WESITE PC426HP-AT-T3-**-*****-**-*-* PULISHING - FOR THE MOST UP-TO- VERSIONS PLEASE REFER TO THE INDIVIDUAL DATASHEETS HIGH POWER 90 CRIMP PLUG - ANTI TAMPER

9 SHIELDED HIGH POWER CRIMP PLUG IP69K,0 `1,0 n A - THREAD nc APPLY THREADLOCKING COMPOUND TO THE CONNECTOR THREAD ON FINAL ASSEMLY AS PER ASQAW DRAWN R.S. 20/10/2015 P.M. 20/10/2015 ALL DIMENSIONS IN MILLIMETRES PROD ISSUE REV. DCR Tel: +44 (0) A CRIMP 35 NCAGE U5792 nc MAX STANDARD 10,0 11,3 13,5 15,2 16,7,1 WEIGHT --- nc MAX FINE STRAND 10,3 12,1 14,2 16,5 17,6 NA WHERE CORE DIAMETER EXCEEDS THE MAXIMUM, POLAMCO RECOMMENDS THE USE OF A SUITALE PRE-ROUNDING DIE TO AID INSERTION INTO THE CRIMP ARREL. FOR FURTHER GUIDANCE SEE POLAMCO ASSEMLY INSTRUCTION - ASQAW06. MIL-DTL STYLE CONNECTOR S CONTACTS - SILVER PLATED COPPER SEAL - SILICONE ELASTOMER VOLTAGE RATING 1000Va.c. / 1410Vd.c MAXIMUM CONTACT RATING, UNLESS OTHERWISE LIMITED Y /CRIMP OPTION SELECTED #23 = 800A # = 600A # = 400A SEALED TO IP69K WHEN MATED. CUSTOMER OVAL COMPANY NAME SIGNATURE ORDERS CANNOT E PLACED AGAINST ALPHA ISSUED DRAWINGS. ON RECEIPT OF CUSTOMER OVAL, THE DRAWING STATUS WILL E RAISED TO ISSUE 1. TITLE: SHELL SHIELDED HIGH POWER STRAIGHT CRIMP PLUG - IP69K ASSY USED ON: D38999/26 A THREAD CLASS 2A ø MAX THIS DRAWING IS COPYRIGHT AND THE PROPERTY OF POLAMCO LTD IT MUST NOT E COPIED, USED FOR MANUFACTURE OR OTHERWISE DISCLOSED WITHOUT PRIOR WRITTEN CONSENT OF THE COMPANY. MAX CRIMP STANDARD PC426HP-T69--35FS-SN-1-C SCREENED ACKSHELL IP69K STRAIGHT ENTRY CRIMP S = STANDARD FS = FINE STRAND AND - () MAX CRIMP FINE STRAND 1,20 38,5 1,37 41,7 23 1,00 44,9 1,62 48,0 / 1-Z ALUMINIUM / ZINC COALT OLIVE DRA OVER ELECTROLESS NICKEL 1-ZK ALUMINIUM / ZINC COALT LACK OVER ELECTROLESS NICKEL 2-Z NICKEL ALUMINIUM RONZE / SHOT LAST LIST NOT EXHAUSTIVE, FOR COMPREHENSIVE LIST AND SPECS, SEE WESITE PC426HP-T69-**-*****-**-*-* PULISHING - FOR THE MOST UP-TO- VERSIONS PLEASE REFER TO THE INDIVIDUAL DATASHEETS POLAMCO LTD, WESTON LOCK, LOWER RISTOL ROAD ATH A2 1EP SHT DRAWING NO:

10 SHIELDED 90 CRIMP PLUG 82,75 MAX (STANDARD LENGTH) Ø A - THREAD REMOVALE END CAP 65, MAX LIP FOR HEATSHRINK OOT nc L `1,0 10 DRAWN CRIMP MAX CORE DIAMETER MAX CORE DIAMETER STANDARD FINE STRAND 10,0 11,3 13,5 15,2 16,7,1 MIL-DTL STYLE CONNECTOR S CONTACT - SILVER PLATED COPPER VOLTAGE RATING 1000Va.c. / 1410Vd.c MAX CONTACT RATING 23 = 800A = 600A = 400A M.PAUL 26/05/2016 P.M. 26/05/ ,3 12,1 14,2 16,5 17,6 NA WHERE CORE DIAMETER EXCEEDS THE MAXIMUM, POLAMCO RECOMMENDS THE USE OF A SUITALE PRE-ROUNDING DIE TO AID INSERTION INTO THE CRIMP ARREL. FOR FURTHER GUIDANCE SEE POLAMCO ASSEMLY INSTRUCTION - ASQAW06. Tel: +44 (0) M.PAUL /08/2014 TITLE: ALL DIMENSIONS IN MILLIMETRES SHELL A THREAD CLASS 2A ø MAX ø C MAX LENGTH L (STANDARD) PC426HP-T3(XL)--FS-PN-1-C SCREENED ACKSHELL 1 = STRAIGHT, 3 = 90 ENTRY (EXTENDED LENGTH, OMIT FOR STD) CRIMP S = STANDARD FS = FINE STRAND AND - () MAX CRIMP LENGTH L (EXTENDED) STANDARD MAX CRIMP FINE STRAND 1,20 38,5 31,60 52,0 98,0 1,37 41,7 34, 54,0 103,0 23 1,00 44,9 38, 56,0 108,0 1,62 48,0 40,64 56,0 112,0 / PLATING 1-Z ALUMINIUM / ZINC COALT OLIVE DRA OVER ELECTROLESS NICKEL 2-Z NICKEL ALUMINIUM RONZE / SHOT LAST LIST NOT EXHAUSTIVE, FOR COMPREHENSIVE LIST AND SPECS, SEE WESITE PC426HP-T3(XL)-**-*****-**-*-* PULISHING - FOR THE MOST UP-TO- VERSIONS PLEASE REFER TO THE INDIVIDUAL DATASHEETS

11 SHIELDED STRAIGHT CRIMP JAM NUT RECEPTACLE o VARIALE LENGTH STANDARD = 22,5 49,4 `1,0 na F ne n40,00 MAX PANEL CUT OUT DIMENSIONS C - HEX 1,58-3,20 STANDARD PANEL THICKNESS L = OPTIONAL PANEL THICKNESS CRIMP 35 MAX CORE DIAMETER STANDARD 10,0 11,3 13,5 15,2 16,7,1 MAX CORE DIAMETER FINE STRAND 10,3 12,1 14,2 16,5 17,6 NA WHERE CORE DIAMETER EXCEEDS THE MAXIMUM, POLAMCO RECOMMENDS THE USE OF A SUITALE PRE-ROUNDING DIE TO AID INSERTION INTO THE CRIMP ARREL. FOR FURTHER GUIDANCE SEE POLAMCO ASSEMLY INSTRUCTION - ASQAW06. SHELL MAX CRIMP MAX CRIMP A C HEX D HOLE E STANDARD FINE STRAND +/-0.3 +/ ,/-0 THREAD +0,/ ,7 40,0 43,0,0 1,20 1,37 1,00 1,62 35,18 38,35 41,53 44, ASSY USED ON: D38999/24 FLAT F n G +0/-0, MAX 33,91 37,08 40,26 43,43 PC424HP-T1--FS-SN-1-C(-L13) 27,60 31,10 36,00 39,84 SCREENED ACKSHELL STRAIGHT ENTRY CRIMP S = STANDARD FS = FINE STRAND AND - () OPTIONAL PANEL THICKNESS IN MM (OMIT FOR STANDARD 3.2MM) / PLATING 1-Z ALUMINIUM / ZINC COALT OLIVE DRA OVER ELECTROLESS NICKEL 2-Z NICKEL ALUMINIUM RONZE / SHOT LAST MIL-DTL STYLE CONNECTOR S CONTACT - SILVER PLATED COPPER VOLTAGE RATING 1000Va.c. / 1410Vd.c MAX CONTACT RATING 23 = 800A = 600A = 400A LIST NOT EXHAUSTIVE, FOR COMPREHENSIVE LIST AND SPECS, SEE WESITE DRAWN R.S 27/01/2016 PC424HP-T1-**-***-**-*-*(-L**) P.M. 27/01/2016 M.PAUL /08/2014 ALL DIMENSIONS IN MILLIMETRES TITLE: PROD SHIELDED RECEPTACLE, CRIMP CONTACT Tel: +44 (0) PULISHING - FOR THE MOST UP-TO- VERSIONS PLEASE REFER TO THE INDIVIDUAL DATASHEETS ISSUE REV. DCR THIS DRAWING IS COPYRIGHT AND THE PROPERTY OF POLAMCO LTD POLAMCO LTD, WESTON LOCK, SHT DRAWING NO: 11

12 SHIELDED STRAIGHT CRIMP SQUARE FLANGE RECEPTACLE S VARIALE LENGTH STANDARD = 20,0 52,0 `1,0 R1 R2 C - THREAD nd PP P 12 CRIMP 35 MAX CORE DIAMETER MAX CORE DIAMETER STANDARD FINE STRAND 10,0 11,3 13,5 15,2 16,7,1 10,3 12,1 14,2 16,5 17,6 NA WHERE CORE DIAMETER EXCEEDS THE MAXIMUM, POLAMCO RECOMMENDS THE USE OF A SUITALE PRE-ROUNDING DIE TO AID INSERTION INTO THE CRIMP ARREL. FOR FURTHER GUIDANCE SEE POLAMCO ASSEMLY INSTRUCTION - ASQAW06. MIL-DTL STYLE CONNECTOR S CONTACTS - SILVER PLATED COPPER SEAL - SILICONE ELASTOMER VOLTAGE RATING 1000Va.c. / 1410Vd.c MAXIMUM CONTACT RATING, UNLESS OTHERWISE LIMITED Y /CRIMP OPTION SELECTED #23 = 800A # = 600A # = 400A DRAWN R.S. 27/01/2016 P.M. 27/01/2016 M.PAUL /08/2014 ALL DIMENSIONS IN MILLIMETRES PROD Tel: +44 (0) SHELL MAX CRIMP MAX CRIMP C n D P PP R1 R2 S STANDARD FINE STRAND +/-0.2 THREAD MAX +/-0.2 +/-0.2 +/ ,3 3,0 3,0 3,0 1,20 1,37 1,00 1,62 27,60 31,10 36,00 39,84 3, 3, 3,91 3,91 4,93 4,93 6,15 6,15 29,36 26,97 31,75 29,36 34,93 31,75 38,10 34,93 36,5 39,7 42,9 TITLE: PC420HP-T1--FS-SN-1-C(-L13) SCREENED ACKSHELL STRAIGHT ENTRY CRIMP S = STANDARD FS = FINE STRAND AND - () OPTIONAL PANEL THICKNESS IN MM (OMIT FOR STANDARD 20MM) / PLATING 1-Z ALUMINIUM / ZINC COALT OLIVE DRA OVER ELECTROLESS NICKEL 2-Z NICKEL ALUMINIUM RONZE / SHOT LAST LIST NOT EXHAUSTIVE, FOR COMPREHENSIVE LIST AND SPECS, SEE WESITE PC420HP-T1-**-*****-**-*-*(-L**) PULISHING - FOR THE MOST UP-TO- VERSIONS PLEASE REFER TO THE INDIVIDUAL DATASHEETS SHIELDED RECEPTACLE, CRIMP CONTACT

13 SHIELDED 90 O JAM NUT RECEPTACLE C - HEX REMOVEALE END CAP 1,58-3,20 STANDARD PANEL L13 = 1,58-13,00 DEEP PANEL ØG 13 CRIMP 35 MAX CORE DIAMETER STANDARD 10,0 11,3 13,5 15,2 16,7,1 MIL-DTL STYLE S CONTACT - SILVER PLATED COPPER VOLTAGE RATING 1000Va.c. / 1410Vd.c MAX CONTACT RATING 23 = 800A = 600A = 400A MAX CORE DIAMETER FINE STRAND F 10,3 12,1 14,2 16,5 17,6 NA WHERE CORE DIAMETER EXCEEDS THE MAXIMUM, POLAMCO RECOMMENDS THE USE OF A SUITALE PRE-ROUNDING DIE TO AID INSERTION INTO THE CRIMP ARREL. FOR FURTHER GUIDANCE SEE POLAMCO ASSEMLY INSTRUCTION - ASQAW06. PANEL CUT OUT DIMENSIONS CUSTOMER OVAL COMPANY NAME SIGNATURE ne SHELL MAX CRIMP MAX CRIMP 23 STANDARD FINE STRAND ORDERS CANNOT E PLACED AGAINST ALPHA ISSUED DRAWINGS. ON RECEIPT OF CUSTOMER OVAL, THE DRAWING STATUS WILL E RAISED TO ISSUE 1. DRAWN M.PAUL 23/05/2016 J.C 23/05/2016 ALL DIMENSIONS IN MILLIMETRES TITLE: PRODTel: +44 (0) A C HEX +/-0.3 +/ ,/-0 THREAD 58,7 40,0 43,0,0 1,20 1,37 1,00 1,62 D HOLE E +0,/-0 35,18 38,35 41,53 44, FLAT F +0/-0, 33,91 37,08 40,26 43,43 n G MAX 31,60 34, 38, 40,64 PC424HP-T3-23-FS-SN-1-C(-L13) SCREENED ACKSHELL 90 ENTRY CRIMP S = STANDARD FS = FINE STRAND AND - () DEEP PANEL OPTION (OMIT FOR STANDARD) / PLATING 1-Z ALUMINIUM / ZINC COALT OLIVE DRA OVER ELECTROLESS NICKEL 2-Z NICKEL ALUMINIUM RONZE / SHOT LAST LIST NOT EXHAUSTIVE, FOR COMPREHENSIVE LIST AND SPECS, SEE WESITE PC424HP-T3-**-***-*-* PULISHING - FOR THE MOST UP-TO- VERSIONS PLEASE REFER TO THE INDIVIDUAL DATASHEETS SHIELDED 90 DEGREE JAM NUT RECEPTACLE

14 HIGH POWER JAM NUT RECEPTACLE o C - HEX VARIALE o LENGTH STANDARD = 22,60 C - HEX o VARIALE LENGTH STANDARD = 22,60 C - HEX VARIALE THREAD LENGTH / LENGTH 36,20 STANDARD = 22,60-36,20 3, 3, THREAD / LE 36,20 - THREAD / LENGTH - 3, na na na G nf G nf ne ne NSIONS PANEL CUT OUT DIMENSIONS PANEL CUT OUT DIMENSIONS 1,58-3,20 STANDARD PANEL THICKNESS L = OPTIONAL PANEL THICKNESS LASER PART/ATCH MARK H 1,58-3,20 STANDARD PANEL THICKNESS 1,58-3,20 STANDARD PANEL THICKNESS L = OPTIONAL PANEL THICKNESS L = OPTIONAL PANEL THICKNESS CRIMP TERMINAL NOT SUPPLIED; TALE PROVIDED FOR INFORMATION PURPOSES ONLY. CRIMP TERMINAL NOT SUPPLIED; TALE CRIMP PROVIDED TERMINAL NOT SUPPLIED; TALE PROVIDED FOR INFORMATION PURPOSES ONLY. SHELL MAX CRIMP FOR MAX INFORMATION CRIMP PURPOSES A C ONLY. HEX D ne HOLE F FLAT G MAX CRIMP SHELL MAX A CRIMP C HEX MAX CRIMP D STANDARD E A HOLE FINE F STRAND C HEX FLAT G +/-0.3 THREAD +/ ,/-0 THREAD MAX +0,/-0 +0/-0, n D n E HOLE F FLAT G THREAD FINE STRAND +/-0.3STANDARD +/ ,/-0 FINE THREAD STRAND MAX +/-0.3+0,/-0 +/ ,/-0 +0/-0, THREAD /LENGTH MAX +0,/-0 +0/-0, /LENGTH 40,0 1,2" 26,5 35,18 33,91 40,0 1,2" 26,5 35,18 40,0 33,91 1,2" M8 X 20 43,0 1,375" 31,0 38,35 37,08 26,5 35,18 33,91 M8 X 20 43,0 23 1,375" 31,0 38,35 43,0 37,08 1,375" M10 X 1,0" 34,4 41,53 40,26 31,0 38,35 37,08 M10 X 23 1,0" 34,4 41,53 40,26 58,7 1,0" M10 X,0 1,6" 36,6 44, 43,43 34,4 41,53 40,26 M10 X 58,7,0 1,6" 36,6 58,7 44,,0 43,43 1,6" M12 X 36,6 44, 43,43 M12 X THREAD /LENGTH M8 X 20 M10 X M10 X M12 X PC424HP-M--PN-1-C(-L1 PC424HP-M--PN-1-C(-L13) PC424HP-M--PN-1-C(-L13) MALE THREAD TERMINATION MIL-DTL STYLE CONNECTOR MALE THREAD TERMINATION MALE THREAD TERMINATION ECTOR MIL-DTL STYLE CONNECTOR S CONTACTS - SILVER PLATED COPPER S SEAL - SILICONE ELASTOMER AND - () COPPER CONTACTS - SILVER PLATED INSULATOR COPPER - PPS-GL40 - UL94V-0 R SEAL - SILICONE ELASTOMER AND - () AND OPTIONAL - () MAXIMUM PANEL THICKNESS IN MM 94V-0 VOLTAGE RATING 1000Va.c. OPTIONAL / 1410Vd.c MAXIMUM PANEL THICKNESS OPTIONAL IN MAXIMUM MM PANEL THICKNESS IN (OMIT MM FOR STANDARD) MAXIMUM CONTACT RATING, UNLESS OTHERWISE. / 1410Vd.c VOLTAGE RATING 1000Va.c. LIMITED / 1410Vd.c Y /CRIMP OPTION SELECTED (OMIT FOR STANDARD), UNLESS OTHERWISE (OMIT FOR STANDARD) MAXIMUM CONTACT RATING, SHELL UNLESS # = OTHERWISE 1000A PTION SELECTED LIMITED Y /CRIMP #23 OPTION = 800A SELECTED # = 600A #23 = 800A # = 400A / # = 600A # = 400A / 1- ALUMINIUM / / CADMIUM OLIVE DRA OVER ELECTROLESS NIC 1-C CUSTOMER OVAL ALUMINIUM 1-C/ ELECTROLESS NICKEL 1-Z ALUMINIUM ALUMINIUM / ELECTROLESS / ZINC COALT NICKEL OLIVE DRA OVER ELECTROLESS N COMPANY 1- NAME ALUMINIUM SIGNATURE / CADMIUM 1- OLIVE DRA OVER ALUMINIUM ELECTROLESS / CADMIUM NICKEL 1-ZK OLIVE ALUMINIUM DRA OVER / ZINC ELECTROLESS COALT LACK NICKEL OVER ELECTROLESS NICK CUSTOMER OVAL CUSTOMER OVAL 1-Z ALUMINIUM / ZINC COALT 1-Z OLIVE DRA OVER ALUMINIUM ELECTROLESS / ZINC COALT NICKEL 1-ZN ALUMINIUM OLIVE DRA / ZINC OVER NICKEL ELECTROLESS LACK PASSIVATE NICKELOVER ELECTROLESS NAME COMPANY SIGNATURE NAME 1-ZK SIGNATURE ALUMINIUM / ZINC COALT 1-ZK LACK OVER ELECTROLESS ALUMINIUM / ZINC NICKEL 4-J COALT LACK OVER ELECTROLESS STAINLESS STEEL NICKEL / PASSIVATE 1-ZN ALUMINIUM / ZINC NICKEL LACK 1-ZN PASSIVATE ALUMINIUM OVER ELECTROLESS / ZINC NICKEL NICKEL 2-Z LACK PASSIVATE NICKEL OVER ALUMINIUM ELECTROLESS RONZE NICKEL / SHOT LAST ORDERS CANNOT E PLACED 4-J AGAINST ALPHA ISSUED DRAWINGS. STAINLESS 4-J STEEL / PASSIVATE STAINLESS STEEL / PASSIVATE ON RECEIPT OF CUSTOMER 2-Z OVAL, THE DRAWING NICKEL STATUS ALUMINIUM WILL E D AGAINST ALPHA 2-Z RONZE RAISED TO / SHOT ISSUE LAST 1. LIST NOT EXHAUSTIVE, FOR COMPREHENSIVE LIST AND SPECS, SEE NICKEL ALUMINIUM RONZE / SHOT LAST ORDERS ISSUED CANNOT DRAWINGS. E PLACED AGAINST ALPHA ISSUED DRAWINGS. OVAL, THE ON DRAWING RECEIPT OF STATUS CUSTOMER WILL DRAWN E OVAL, RAISED TO THE ISSUE DRAWING 1. LIST STATUS NOT WILL EXHAUSTIVE, 3RD E RAISED FOR ANGLE M.PAUL TO ISSUE COMPREHENSIVE 1. LIST NOT LIST EXHAUSTIVE, AND SPECS, FOR SEE COMPREHENSIVE WESITE LIST AND SPECS, SEE WESITE 27/01/2016 7/01/2016 DRAWN M.PAUL PART NUMER: PC424HP-M-**-**-*-*(-L**) 27/01/2016 P.M. 27/01/2016 PC424HP-M-**-**-*-*(-L**) PC424HP-M-**-**-*-*(-L**) 7/01/2016 P.M. 27/01/2016 ALL DIMENSIONS IN MILLIMETRES THIS TITLE: DRAWING IS THE PROPERTY OF POLAMCO LTD AND MUST NOT E USED FOR COMMERCIAL UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES TITLE: PROD ALL DIMENSIONS IN MILLIMETRES TITLE: HIGH POWER JAM NUT RECEPTACLE 14 Tel: +44 (0) PULISHING - FOR THE MOST UP-TO- VERSIONS PLEASE REFER TO THE INDIVIDUAL DATASHEETS PROD HIGH POWER JAM NUT HIGH RECEPTACLE POWER JAM NUT RECEPTACLE ISSUE REV. ASSY USED ON: D38999/24

15 HIGH POWER JAM NUT RECEPTACLE na o C HEX na o C HEX na o VARIALE LENGTH STANDARD = C 22,60 HEX LASER PART/ATCH MARK LASER HERE PART/ATCH MARK HE VARIALE LENGTH VARIALE LENGTH 3, STANDARD = 22,60 STANDARD 3, = 22,60 3, FEMALE THREAD - FEMALE THREAD - FEMAL - ne ne ne G nf LOCK WIRE HOLES AS STANDARD, LOCK ADD WIRE HOLES AS STANDARD, LOCK WIRE ADD HOLES AS STANDARD, ADD "-NW" SUFFIX IF NOT REQUIRED "-NW" SUFFIX IF NOT REQUIRED "-NW" SUFFIX IF NOT REQUIRED nf 1,58-3,20 STANDARD PANEL THICKNESS 1,58-3,20 STANDARD PANEL 1,58-3,20 THICKNESS STANDARD PANEL THICKNESS L = OPTIONAL PANEL THICKNESS L = OPTIONAL PANEL THICKNESS L = OPTIONAL PANEL THICKNESS G ENSIONS PANEL CUT OUT DIMENSIONSPANEL CUT OUT DIMENSIONS CRIMP TERMINAL NOT SUPPLIED; CRIMP TALE TERMINAL PROVIDEDNOT SUPPLIED; CRIMP TERMINAL TALE PROVIDED NOT SUPPLIED; TALE PROVIDED FOR INFORMATION PURPOSES ONLY FOR INFORMATION PURPOSES FOR INFORMATION ONLY PURPOSES ONLY MAX CRIMP SHELL MAX A CRIMP C HEX SHELL MAX CRIMP D MAX CRIMP A MAX CRIMP C HEX DA n E HOLE F FLAT G THREAD n E C HEX HOLE F DFLAT G THREAD n E HOLE F FINE STRAND +/-0.3 STANDARD +/ ,/-0 FINE THREAD STRAND STANDARD MAX +/-0.3 +/ ,/-0 FINE +0,/-0 STRAND +0/-0,THREAD +/-0.3 +/-0.2 MAX +0,/-0 +0,/-0 THREAD +0/-0, MAX +0,/ ,7 40,0 43,0,0 1,2" 1,375" 23 1,0" 1,6" 26,5 31,0 34,4 36,6 58,7 35,18 40,0 33,91 38,35 43,0 37,08 41,53 40,26 44,,0 43,43 1,2" M8 1,375" M10 1,0" M10 1,6" M12 58,7 26,540,035,181,2" 33,91 31,043,038,351,375" 37,08 34,441,531,0" 40,26 36,6,044,1,6" 43,43 26,5 M8 31,0 M10 34,4 M10 36,6 M12 35,18 38,35 41,53 44, FLAT G +0/-0, 33,91 37,08 40,26 43,43 THREAD M8 M10 M10 M12 PC424HP-F--PN-1-C(-L13) PC424HP-F--PN-1-C(-L13) PC424HP-F--PN-1-C(-L13) FEMALE THREAD TERMINATIONFEMALE THREAD TERMINATION FEMALE THREAD TERMINATION AND - () AND - () AND - () NECTOR MIL-DTL STYLE CONNECTOR MIL-DTL STYLE CONNECTOR OPTIONAL MAXIMUM PANEL THICKNESS OPTIONAL IN MAXIMUM MM PANEL OPTIONAL THICKNESS MAXIMUM IN PANEL MM THICKNESS IN MM (OMIT FOR STANDARD (OMIT 3,2MM) FOR STANDARD 3,2MM) S S (OMIT FOR STANDARD 3,2MM) D COPPER CONTACTS - SILVER PLATED CONTACTS COPPER - SILVER PLATED COPPER ER SEAL - SILICONE ELASTOMERSEAL - SILICONE ELASTOMER / / L94V-0 / 1-C ALUMINIUM 1-C / ELECTROLESS NICKEL 1-CALUMINIUM / ELECTROLESS ALUMINIUM NICKEL / ELECTROLESS NICKEL VOLTAGE RATING 1000Va.c. VOLTAGE / 1410Vd.c RATING 1000Va.c. / 1410Vd.c 1- ALUMINIUM 1- / CADMIUM OLIVE ALUMINIUM DRA OVER / CADMIUM ELECTROLESS OLIVE NICKEL DRA OVER ELECTROLESS N c. / 1410Vd.c G, UNLESS OTHERWISE MAXIMUM CONTACT RATING, MAXIMUM UNLESS OTHERWISE CONTACT RATING, 1-Z UNLESS ALUMINIUM OTHERWISE / ZINC COALT 1-ZOLIVE DRA ALUMINIUM OVER ELECTROLESS 1-Z / ZINC COALT NICKELOLIVE ALUMINIUM DRA OVER / ZINC ELECTROLESS COALT OLIVE NICKEL DRA OVER ELECTROLESS OPTION SELECTED LIMITED Y /CRIMP OPTION LIMITED SELECTED Y /CRIMP OPTION SELECTED 1-ZK ALUMINIUM 1-ZK / ZINC COALT LACK ALUMINIUM OVER / ELECTROLESS ZINC COALT NICKEL LACK OVER ELECTROLESS N 1-ZK ALUMINIUM / ZINC COALT LACK OVER ELECTROLESS NICKEL #23 = 800A #23 = 800A 1-ZN ALUMINIUM / ZINC NICKEL LACK PASSIVATE OVER ELECTROLESS 1-ZN NICKEL ALUMINIUM / ZINC NICKEL LACK PASSIVATE OVER ELECTROLE # = 600A # = 600A 2-Z NICKEL 2-Z ALUMINIUM RONZE NICKEL / SHOT ALUMINIUM LAST RONZE / SHOT LAST # = 400A # = 400A 2-Z NICKEL ALUMINIUM RONZE / SHOT LAST LIST NOT EXHAUSTIVE, FOR COMPREHENSIVE LIST NOT EXHAUSTIVE, LIST AND SPECS, FOR LIST SEE COMPREHENSIVE NOT WESITE EXHAUSTIVE, LIST FOR AND COMPREHENSIVE SPECS, SEE WESITE LIST AND SPECS, SEE WES DRAWN R.S. DRAWN R.S. 27/01/ /01/ /01/2016 PC424HP-F-**-**-*-*(-L**) PC424HP-F-**-**-*-*(-L**) PC424HP-F-**-**-*-*(-L**) P.M. 27/01/2016 P.M. 27/01/ /01/2016 ALL DIMENSIONS IN MILLIMETRES TITLE: ALL DIMENSIONS IN MILLIMETRES TITLE: ALL DIMENSIONS IN MILLIMETRES TITLE: PROD PROD THIS DRAWING IS THE PROPERTY HIGH POWER RECEPTACLE HIGH OF POLAMCO POWER LTD AND RECEPTACLE MUST NOT E USED FOR COMMERCIAL ANGULAR HIGH +/- 1 POWER ANGULAR RECEPTACLE +/ Tel: +44 (0) PULISHING - FOR THE MOST UP-TO- VERSIONS PLEASE REFER TO THE INDIVIDUAL DATASHEETS ISSUE REV. ISSUE REV. R DCR DCR 2 2 ASSY USED ON: D38999/24 ASSY USED ON: D38999/24 ASSY USED ON: D38999/24 1

16 SHIELDED STRAIGHT CRIMP JAM NUT RECEPTACLE - IP69K o VARIALE LENGTH STANDARD = 22,5 48,0 `1,0 na F ne PANEL CUT OUT DIMENSIONS C - HEX APPLY THREADLOCKING COMPOUND TO THE CONNECTOR THREAD ON FINAL ASSEMLY AS PER ASQAW ,58-3,20 STANDARD PANEL THICKNESS L = OPTIONAL PANEL THICKNESS 16 CRIMP 35 MAX CORE DIAMETER MAX CORE DIAMETER STANDARD FINE STRAND 10,0 11,3 13,5 15,2 16,7,1 DRAWN R.S. 20/10/2015 P.M. 20/10/2015 ALL DIMENSIONS IN MILLIMETRES PROD Tel: +44 (0) ISSUE REV. DCR 10,3 12,1 14,2 16,5 17,6 NA WHERE CORE DIAMETER EXCEEDS THE MAXIMUM, POLAMCO RECOMMENDS THE USE OF A SUITALE PRE-ROUNDING DIE TO AID INSERTION INTO THE CRIMP ARREL. FOR FURTHER GUIDANCE SEE POLAMCO ASSEMLY INSTRUCTION - ASQAW06. MIL-DTL STYLE CONNECTOR S CONTACTS - SILVER PLATED COPPER SEAL - SILICONE ELASTOMER VOLTAGE RATING 1000Va.c. / 1410Vd.c MAXIMUM CONTACT RATING, UNLESS OTHERWISE LIMITED Y /CRIMP OPTION SELECTED #23 = 800A # = 600A # = 400A SEALED TO IP69K WHEN MATED. CUSTOMER OVAL COMPANY NAME SIGNATURE ORDERS CANNOT E PLACED AGAINST ALPHA ISSUED DRAWINGS. ON RECEIPT OF CUSTOMER OVAL, THE DRAWING STATUS WILL E RAISED TO ISSUE 1. SHELL MAX CRIMP MAX CRIMP A C HEX D HOLE E STANDARD FINE STRAND +/-0.3 +/ ,/-0 THREAD +0,/ ,7 40,0 43,0,0 1,20 1,37 1,00 1,62 35,18 38,35 41,53 44, TITLE: SHIELDED HIGH POWER STRAIGHT CRIMP JAM NUT RECEPTACLE - IP69K ASSY USED ON: D38999/24, IP69K FLAT F +0/-0, 33,91 37,08 40,26 43,43 PC424HP-T69--35FS-SN-1-C(-L13) SCREENED ACKSHELL IP69K STRAIGHT ENTRY CRIMP S = STANDARD FS = FINE STRAND AND - () OPTIONAL PANEL THICKNESS IN MM (OMIT FOR STANDARD 3,2MM) / 1-Z ALUMINIUM / ZINC COALT OLIVE DRA OVER ELECTROLESS NICKEL 1-ZK ALUMINIUM / ZINC COALT LACK OVER ELECTROLESS NICKEL 2-Z NICKEL ALUMINIUM RONZE / SHOT LAST LIST NOT EXHAUSTIVE, FOR COMPREHENSIVE LIST AND SPECS, SEE WESITE PC424HP-T69-**-*****-**-*-*(-L**) PULISHING - FOR THE MOST UP-TO- VERSIONS PLEASE REFER TO THE INDIVIDUAL DATASHEETS

17 UNSHIELDED STRAIGHT MALE THREAD JAM NUT RECEPTACLE na o C - HEX VARIALE LENGTH STANDARD = 22,60 na o C - HEX o 36,20 C - 3, HEX THREAD / LENGTH - VARIALE LENGTH STANDARD = 22,60 VARIALE LENGTH STANDARD = 22,60 3, 36,20 36,20 3, THREAD / LENGTH - THREAD / LE - SIONS G nf G na nf PANEL CUT OUT DIMENSIONS ne ne 1,58-3,20 STANDARD PANEL THICKNESS L = OPTIONAL PANEL THICKNESS PANEL CUT OUT DIMENSIONS LASER 1,58 - PART/ATCH 3,20 STANDARD MARK PANEL HERETHICKNESS L = OPTIONAL PANEL THICKNESS LASER PART/ATCH MARK H 1,58-3,20 STANDARD PANEL THICKNESS L = OPTIONAL PANEL THICKNESS AX CRIMP FINE STRAND CRIMP TERMINAL NOT SUPPLIED; TALE PROVIDED FOR INFORMATION PURPOSES ONLY. CRIMP TERMINAL NOT SUPPLIED; TALE PROVIDED FOR INFORMATION PURPOSES ONLY. A C HEX D n E HOLE F FLAT G THREAD SHELL MAX CRIMP MAX CRIMP A C HEX D n E HOLE F FLAT G +/-0.3 +/ ,/-0 THREAD MAX +0,/-0 +0/-0, /LENGTH STANDARD FINE STRAND +/-0.3 +/ ,/-0 THREAD MAX +0,/-0 +0/-0, CRIMP TERMINAL NOT SUPPLIED; TALE PROVIDED 40,0 1,2" 26,5 FOR 35,18 INFORMATION 33,91 PURPOSES M8 X 20 ONLY. 40,0 1,2" 26,5 35,18 33,91 43,0 1,375" 31,0 38,35 37,08 M10 X SHELL MAX CRIMP MAX CRIMP A C HEX D n43,0 E HOLE 1,375" F FLAT G31,0 THREAD 38,35 37,08 1,0" 34,4 41,53 40,26 M10 X STANDARD 23 FINE STRAND +/-0.3 +/ ,/-0 THREAD MAX +0,/-0 1,0" +0/-0, 34,4 /LENGTH 41,53 40,26 58,7,0 1,6" 36,6 44, 43,43 M12 X 58,7,0 1,6" 36,6 44, 43, ,7 40,0 43,0,0 1,2" 1,375" 1,0" 1,6" 26,5 31,0 34,4 36,6 35,18 38,35 41,53 44, 33,91 37,08 40,26 43,43 M8 X 20 M10 X M10 X M12 X MALE THREAD TERMINATION PC424HP-M--PN-1-C(-L13) PC424HP-M--PN-1-C(-L1 MALE THREAD TERMINATION PC424HP-M--PN-1-C(-L13) ECTOR MIL-DTL STYLE CONNECTOR S COPPER CONTACTS - SILVER PLATED MALE THREAD TERMINATION COPPER AND - () 4V-0 SEAL - SILICONE ELASTOMER AND - () MIL-DTL STYLE CONNECTOR OPTIONAL MAXIMUM PANEL THICKNESS IN MM OPTIONAL MAXIMUM PANEL THICKNESS IN MM / 1410Vd.c VOLTAGE RATING 1000Va.c. / 1410Vd.c (OMIT FOR STANDARD) UNLESS OTHERWISE S (OMIT FOR STANDARD) TION SELECTED MAXIMUM CONTACT RATING, UNLESS OTHERWISE CONTACTS - SILVER PLATED LIMITED COPPER Y /CRIMP OPTION SELECTED SEAL - SILICONE ELASTOMER AND - () #23 = 800A OPTIONAL MAXIMUM PANEL THICKNESS IN MM # = 600A VOLTAGE RATING 1000Va.c. / 1410Vd.c / # = 400A (OMIT FOR STANDARD) MAXIMUM CONTACT RATING, UNLESS OTHERWISE / LIMITED Y /CRIMP OPTION SELECTED 1- ALUMINIUM / CADMIUM OLIVE DRA OVER ELECTROLESS 1-C NICKEL ALUMINIUM / ELECTROLESS NICKEL CUSTOMER OVAL 1-Z ALUMINIUM / ZINC COALT OLIVE DRA OVER ELECTROLESS 1- NICKEL ALUMINIUM / CADMIUM OLIVE DRA OVER ELECTROLESS NIC NAME #23 = 800A SIGNATURE 1-ZK CUSTOMER ALUMINIUM OVAL / ZINC COALT LACK OVER ELECTROLESS 1-Z NICKEL ALUMINIUM / ZINC COALT OLIVE DRA OVER ELECTROLESS NI # = 600A COMPANY 1-ZN NAMEALUMINIUM / ZINC SIGNATURE NICKEL LACK PASSIVATE OVER ELECTROLESS 1-ZK NICKEL ALUMINIUM / ZINC COALT LACK OVER ELECTROLESS NICK # = 400A 1-ZN ALUMINIUM / ZINC NICKEL LACK PASSIVATE OVER ELECTROLESS 2-Z NICKEL ALUMINIUM 1-C RONZE / SHOT LAST 4-J ALUMINIUM / ELECTROLESS STAINLESS NICKEL STEEL / PASSIVATE AGAINST ALPHA ISSUED DRAWINGS. 1- ALUMINIUM 2-Z / CADMIUM OLIVE DRA NICKEL OVER ELECTROLESS ALUMINIUM RONZE NICKEL/ SHOT LAST PPROVAL, THE DRAWING STATUS WILL ORDERS E RAISED CANNOT CUSTOMER ISSUE E PLACED OVAL 1. LIST AGAINST NOT EXHAUSTIVE, ALPHA ISSUED FOR DRAWINGS. COMPREHENSIVE LIST AND SPECS, SEE WESITE ON RECEIPT OF CUSTOMER OVAL, THE DRAWING STATUS WILL 1-Z E RAISED ALUMINIUM TO ISSUE 1. / ZINC LIST COALT NOT EXHAUSTIVE, OLIVE DRA FOR OVER COMPREHENSIVE ELECTROLESS NICKEL LIST AND SPECS, SEE COMPANY NAME SIGNATURE 1-ZK ALUMINIUM / ZINC COALT LACK OVER ELECTROLESS NICKEL /01/2016 DRAWN M.PAUL PC424HP-M-**-**-*-*(-L**) 27/01/2016 /01/2016 PC424HP-M-**-**-*-*(-L**) P.M. 27/01/ Z NICKEL ALUMINIUM RONZE / SHOT LAST UNLESS ORDERS OTHERWISE CANNOT SPECIFIED E PLACED AGAINST ALPHA ISSUED DRAWINGS. ALL DIMENSIONS RECEIPT IN MILLIMETRES OF CUSTOMER TITLE: OVAL, THE DRAWING STATUS WILL UNLESS E OTHERWISE RAISED TO SPECIFIED ISSUE 1. LIST NOT EXHAUSTIVE, FOR COMPREHENSIVE LIST AND SPECS, SEE WESITE ALL DIMENSIONS IN MILLIMETRES TITLE: DRAWN M.PAUL PROD HIGH POWER JAM 27/01/2016 PART NUT GENERAL NUMER: RECEPTACLE TOL PC424HP-M-**-**-*-*(-L**) HIGH POWER JAM NUT RECEPTACLE P.M. 27/01/2016 ISSUE REV. ALL DIMENSIONS DCR IN MILLIMETRES TITLE: PROD THIS DRAWING 1IS COPYRIGHT AND THE PROPERTY OF POLAMCO LTD POLAMCO LTD, WESTON LOCK, HIGH POWER JAM SHT NUT DRAWING RECEPTACLE NO: WEIGHT 17 SEE PART Tel: NUMER +44 (0)12 IT MUST 3220 NOT E COPIED, ANGULAR USED FOR +/- MANUFACTURE 1 OR OTHERWISE PULISHING LOWER THIS DRAWING RISTOL - FOR THE ROAD IS MOST COPYRIGHT UP-TO- AND THE VERSIONS PROPERTY PLEASE OF POLAMCO REFER LTD TO POLAMCO THE INDIVIDUAL LTD, WESTON DATASHEETS LOCK, SHT DRA DISCLOSED WITHOUT PRIOR WRITTEN WEIGHT CONSENT SEE OF THE PART COMPANY. NUMER IT ATH MUST A2 NOT 1EP E COPIED, USED FOR MANUFACTURE OR OTHERWISE LOWER RISTOL ROAD NCAGE U C4969 DISCLOSED WITHOUT PRIOR WRITTEN CONSENT OF THE COMPANY. ATH A2 1EP 1 C ASSY USED ON: D38999/24 ASSY USED ON: D38999/24 THREAD /LENGTH M8 X 20 M10 X M10 X M12 X

18 P SQUARE FLANGE RECEPTACLE S R1 R2 PP S S R1 R2 VARIALE LENGTH STANDARD = 20,00 PP P C - THREAD R1 R2 38,80 VARIALE LENGTH STANDARD = 20,00 38,80 C - THREAD FEMALE THREAD - VARIALE LENGTH STANDARD = 20,00 nd C - THREAD nd 38,80 FEMALE THREAD - nd P FEMALE THREAD - CRIMP TERMINAL NOT SUPPLIED; TALE PROVIDED FOR INFORMATION PURPOSES ONLY CRIMP TERMINAL NOT SUPPLIED; TALE PROVIDED ) MAX CRIMP C nd P PP R1 R2 S THREAD FOR INFORMATION PURPOSES ONLY FINE STRAND +/-0.2 THREAD MAX +/-0.2 +/-0.2 +/-0.3 SHELL MAX CRIMP MAX CRIMP C nd P PP R1 R2 S 2,3 1,2" 26,5 3,STANDARD 4,93 CRIMP 29,36 TERMINAL 26,97 FINE 36,5 STRANDM8 NOT SUPPLIED; +/-0.2 THREAD TALE PROVIDED MAX +/-0.2 +/-0.2 +/-0.3 3,0 1,375" 31,0 3, 4,93FOR 31,75 INFORMATION 29,36 39,7 PURPOSES M10 ONLY 3,0 1,0" 34,4 3,91 6,15 34,93 31,75 42,9 M10 2,3 1,2" 26,5 3, 4,93 29,36 26,97 36,5 SHELL MAX 3,0 CRIMP 1,6" MAX 36,6 CRIMP 3,91 6,15 38,10 34,93 C n D M12P 3,0 PP 1,375" R1 R2 31,0S 3, THREAD 4,93 31,75 29,36 39,7 STANDARD FINE 23STRAND +/-0.2 THREAD MAX +/-0.23,0 +/-0.2 1,0" 34,4 +/-0.3,916,15 34,93 31,75 42,9 3,0 1,6" 36,6 3,91 6,15 38,10 34, ,3 3,0 3,0 3,0 1,2" 1,375" 1,0" 1,6" 26,5 31,0 34,4 36,6 3, 3, 3,91 3,91 4,93 29,36 26,97 4,93 31,75 29,36 6,15 34,93 31,75 6,15 38,10 34,93 36,5 39,7 42,9 M8 M10 M10 M12 PC420HP-F--PN-1-C(-L13) FEMALE THREAD TERMINATION FEMALE THREAD TERMINATION PC420HP-F--PN-1-C(-L13) PC420HP-F--PN-1-C(-L13) AND - (SEE TALE) ONNECTOR OPTIONAL PANEL THICKNESS FEMALE IN MM THREAD TERMINATION AND - () MIL-DTL STYLE CONNECTOR (OMIT FOR STANDARD 20MM) OPTIONAL PANEL THICKNESS IN MM ED COPPER MER (OMIT FOR STANDARD 20MM) UL94V-0 S / CONTACTS - SILVER PLATED 1-C COPPER ALUMINIUM / ELECTROLESS AND NICKEL - () a.c. / 1410Vd.c SEAL - SILICONE ELASTOMER MIL-DTL STYLE CONNECTOR ING, UNLESS OTHERWISE OPTIONAL PANEL THICKNESS IN MM / 1-Z ALUMINIUM / ZINC COALT OLIVE DRA OVER ELECTROLESS NICKEL P OPTION SELECTED 1-ZK ALUMINIUM / ZINC COALT (OMIT LACK FOR OVER STANDARD ELECTROLESS 20MM) NICKEL VOLTAGE RATING 1000Va.c. / 1410Vd.c S 1- ALUMINIUM / CADMIUM OLIVE DRA OVER ELECTROLES MAXIMUM CONTACT 1-ZN RATING, UNLESS ALUMINIUM OTHERWISE / ZINC NICKEL LACK PASSIVATE OVER ELECTROLESS NICKEL CONTACTS - SILVER PLATED COPPER 1-Z ALUMINIUM / ZINC COALT OLIVE DRA OVER ELECTROLE LIMITED Y /CRIMP 4-J OPTION SELECTED STAINLESS STEEL / PASSIVATE SEAL - SILICONE ELASTOMER 1-ZK ALUMINIUM / ZINC COALT LACK OVER ELECTROLESS 2-Z NICKEL ALUMINIUM RONZE / SHOT LAST 1-ZN ALUMINIUM / / ZINC NICKEL LACK PASSIVATE OVER ELECTRO #23 = 800A LIST NOT EXHAUSTIVE, FOR COMPREHENSIVE LIST AND SPECS, 1-C 4-J ALUMINIUM SEE WESITE / ELECTROLESS NICKEL STAINLESS STEEL / PASSIVATE # = 600A VOLTAGE RATING 3RD 1000Va.c. ANGLE / 1410Vd.c # = 400A 1- ALUMINIUM / CADMIUM 2-Z OLIVE DRA OVER NICKEL ELECTROLESS ALUMINIUM NICKEL RONZE / SHOT LAST 27/01/2016 MAXIMUM CONTACT RATING, PART UNLESS NUMER: OTHERWISE 1-Z ALUMINIUM / ZINC COALT LIST NOT OLIVE EXHAUSTIVE, DRA OVER ELECTROLESS FOR COMPREHENSIVE NICKEL LIST AND SPEC LIMITED Y /CRIMP OPTION SELECTED PC420HP-F-xx-xx-x-x(-L**) 27/01/ ZK ALUMINIUM / ZINC COALT LACK OVER ELECTROLESS NICKEL DRAWN #23 = 800A M.PAUL 27/01/2016 # = 600A PC420HP-F-xx-xx-x-x(-L**) ALL DIMENSIONS IN MILLIMETRES TITLE: # = 400A P.M. 27/01/ Z NICKEL ALUMINIUM RONZE / SHOT LAST HIGH POWER UNLESS OTHERWISE RECEPTACLE SPECIFIED LIST NOT EXHAUSTIVE, FOR COMPREHENSIVE LIST AND SPECS, SEE WESITE ALL DIMENSIONS IN MILLIMETRES TITLE: DRAWN M.PAUL 27/01/2016 PROD PC420HP-F-xx-xx-x-x(-L**) HIGH POWER RECEPTACLE CR P.M. 27/01/2016 THIS DRAWING UNLESS IS COPYRIGHT OTHERWISE AND SPECIFIED THE PROPERTY SEE OF POLAMCO PART NUMER LTD POLAMCO LTD, WESTON LOCK, ISSUE ALL REV. DIMENSIONS IN MILLIMETRES DCR TITLE: PURPOSES WITHOUT WRITTEN SHTCONSENT DRAWING OF THE NO: COMPANY. DRAWING CORRECT AT TIME OF WEIGHT IT MUST NOT E COPIED, USED FOR MANUFACTURE OR 2 OTHERWISE LOWER RISTOL ROAD 18 Tel: DISCLOSED WITHOUT GENERAL PRIOR WRITTEN TOL CONSENT OF THE COMPANY. ATH A2 1EP PROD +44 (0) PULISHING - FOR THE MOST UP-TO- VERSIONS PLEASE REFER TO THE INDIVIDUAL DATASHEETS 1 HIGH POWER RECEPTACLE 1 C5587 THIS DRAWING IS COPYRIGHT AND THE PROPERTY OF POLAMCO LTD POLAMCO ON OUR LTD, WESITE WESTON LOCK, SHT WEIGHT IT MUST NOT E COPIED, USED FOR MANUFACTURE OR OTHERWISE LOWER RISTOL ROAD NCAGE U5792 DISCLOSED WITHOUT PRIOR WRITTEN CONSENT OF THE COMPANY. ATH A2 1EP 1 ASSY USED ON: D38999/20 ASSY USED ON: D38999/20 THREAD M8 M10 M10 M12

19 LOW PROFILE SQUARE FLANGE RECEPTACLE S R1 R2 PP C - THREAD S R1 R2 PP P 20,80 S R1 R2 C - THREAD 16,00 HOUSIN 16,00 HOUSING PENETRATION PENETRATION (SEE Interconnect 20,80 Solutions Worldwide PART NUME PART NUMER) 14,00 14,00 16,00 HOUSING PENETRATION (SEE 20,80 PART NUMER) C - THREAD MALE THREAD - 14,00 MALE THREAD - MALE P CRIMP E STRAND CRIMP TERMINAL NOT SUPPLIED; TALE PROVIDED FOR INFORMATION PURPOSES ONLY. SHELL MAX CRIMP MAX CRIMP C P PP R1 R2 C P PP R1 R2STANDARD S THREADFINE STRAND +/-0.2 THREAD +/-0.2 +/-0.2 +/-0.2 THREAD +/-0.2 +/-0.2 +/-0.3 CRIMP TERMINAL NOT SUPPLIED; 2,3 TALE 1,20 PROVIDED 3, 4,93 29,36 26,97 2,3 1,20 3, 4,93 29,36 26,97FOR 36,5INFORMATION M8 PURPOSES 3,0ONLY. 1,37 3, 4,93 31,75 29,36 3,0 1,37 3, 4,93 31, ,36 39,7 M10 3,0 1,00 3,91 6,15 34,93 31,75 SHELL MAX CRIMP MAX CRIMP C P PP R1 R2 S THREAD 3,0 1,00 3,91 6,15 34,93 31,75 42,9 M10 3,0 STANDARD FINE STRAND +/-0.2 THREAD +/-0.2 +/-0.2 1,62 3,91 6,15 +/ ,10 34,93 3,0 1,62 3,91 6,15 38,10 34,93 M12 1,20 3, 4,93 29,36 26,97 36,5 M8 1,37 3, 4,93 31,75 29,36 39,7 M ,3 3,0 3,0 3,0 1,00 1,62 CRIMP TERMINAL NOT SUPPLIED; TALE PROVIDED FOR INFORMATION PURPOSES ONLY. 3,91 6,15 34,93 31,75 42,9 3,91 6,15 38,10 34,93 MALE THREAD TERMINATION MALE THREAD TERMINATION PC420HP-M--PN-1-C-H16 - (P = PIN, S = SOCKET) - (P = PIN, S = SOCKET) AND - () MALE THREAD TERMINATION MIL-DTL STYLE CONNECTOR AND - () HOUSING PENETRATION IN MM CTOR HOUSING PENETRATION IN MM S - (P = PIN, S = SOCKET) CONTACTS - SILVER PLATED COPPER OPPER SEAL - SILICONE ELASTOMER AND - () V-0 MIL-DTL STYLE CONNECTOR HOUSING PENETRATION IN MM VOLTAGE RATING 1000Va.c. / 1410Vd.c / PLATING 1410Vd.c MAXIMUM CONTACT RATING, UNLESS OTHERWISE NLESS OTHERWISE S LIMITED Y /CRIMP OPTION SELECTED / PLATING TION SELECTED CONTACTS - SILVER PLATED COPPER 1- ALUMINIUM / CADMIUM OLIVE DRA OVER ELECTR SEAL - SILICONE ELASTOMER #23 = 800A 1-Z ALUMINIUM / ZINC COALT OLIVE DRA OVER ELEC # = 600A 1-Z ALUMINIUM / ZINC COALT OLIVE DRA OVER ELECTROLESS NICKEL # = 400A 2-Z NICKEL ALUMINIUM RONZE / SHOT L VOLTAGE RATING 1000Va.c. / 1410Vd.c 2-Z NICKEL ALUMINIUM RONZE / SHOT LAST MAXIMUM CONTACT RATING, UNLESS OTHERWISE LIST NOT EXHAUSTIVE, / PLATING FOR COMPREHENSIVE LIST AND SPE LIST NOT EXHAUSTIVE, FOR COMPREHENSIVE LIMITED Y /CRIMP OPTION SELECTED 1-C LIST AND SPECS, SEE WESITE ALUMINIUM / ELECTROLESS NICKEL DRAWN R.S. 04/01/ ALUMINIUM POLAMCO / CADMIUM OLIVE DRA LTD OVER ELECTROLESS WESTON LOCK T #23 = 800A 1-Z ALUMINIUM / ZINC COALT OLIVE DRA OVER ELECTROLESS LOWER RISTOL NICKELROAD CO 016 WESTON LOCK THIS DRAWING IS POLAMCO # = 600A P.M. 04/01/2016 LTD LOWER RISTOL ROAD 4-J COPYRIGHT AND THE STAINLESS STEEL / PASSIVATE ATH A2 1EP 016 # = 400A ATH A2 1EP PROPERTY OF 2-Z POLAMCO NICKEL LTD ALUMINIUM RONZE / SHOT LAST IT M ALL DIMENSIONS IN MILLIMETRES USED LIST NOT EXHAUSTIVE, IT MUST NOT FOR E COPIED, COMPREHENSIVE LIST AND SPECS, SEE WESITE ALL DIMENSIONS IN MILLIMETRES PROD USED FOR MANUFACTURE OR OT TITLE: WITH OR OTHERWISE DISCLOSED DRAWN R.S. 04/01/2016 WESTON LOCK THIS DRAWING IS POLAMCO LTD HIGH POWER RECEPTACLE - LOW CONS TITLE: WITHOUT PRIOR WRITTEN LOWER RISTOL ROAD COPYRIGHT AND THE HIGH POWER RECEPTACLE P.M. 04/01/2016 SEE PART NUMER - LOW CONSENT OF THE COMPANY. ATH A2 1EP PROPERTY OF ISSUE DCR PROFILE THIS DRAWING IS THE PROPERTY OF POLAMCO LTD AND MUST NOT E USED POLAMCO FOR COMMERCIAL LTD 1 PROFILE IT MUST NOT E COPIED, ALL DIMENSIONS IN MILLIMETRES PURPOSES PART WITHOUT NUMER: WRITTEN CONSENT OF THE COMPANY. DRAWING CORRECT AT TIME OF USED FOR MANUFACTURE DRA PRODTel: +44 (0) OR OTHERWISE DISCLOSED NCAGE LINEAR +/-0,MM U5792 WEIGHT SEE PART PULISHING NUMER - FOR THE MOST UP-TO- VERSIONS PLEASE REFER TO THE INDIVIDUAL DATASHEETS DRAWING PC420HP-M-**-**-*-*-H** NO: SHT GHT PC420HP-M-**-**-*-*-H** TITLE: WITHOUT PRIOR ON OUR WRITTEN WESITE C C CONSENT OF THE COMPANY. ASSY USED ON: D38999/20 ASSY USED ON: D38999/20 M10 M12 PC420HP-M--PN-1-C-H16 S +/ ,5 39,7 42,9 ASSY USED ON: D38999/20 THREAD M8 M10 M10 M12 HIGH POWER RECEPTACLE - LOW PC420HP-M--PN-1-C

20 SHIELDED STRAIGHT CRIMP SQUARE FLANGE RECEPTACLE - IP69K S VARIALE LENGTH STANDARD = 20,0 49,7 `1,0 R1 R2 PP C - THREAD P APPLY THREADLOCKING COMPOUND TO THE CONNECTOR THREAD ON FINAL ASSEMLY AS PER ASQAW CRIMP 35 MAX CORE DIAMETER MAX CORE DIAMETER STANDARD FINE STRAND 10,0 11,3 13,5 15,2 16,7,1 10,3 12,1 14,2 16,5 17,6 NA WHERE CORE DIAMETER EXCEEDS THE MAXIMUM, POLAMCO RECOMMENDS THE USE OF A SUITALE PRE-ROUNDING DIE TO AID INSERTION INTO THE CRIMP ARREL. FOR FURTHER GUIDANCE SEE POLAMCO ASSEMLY INSTRUCTION - ASQAW06. MIL-DTL STYLE CONNECTOR S CONTACTS - SILVER PLATED COPPER SEAL - SILICONE ELASTOMER VOLTAGE RATING 1000Va.c. / 1410Vd.c MAXIMUM CONTACT RATING, UNLESS OTHERWISE LIMITED Y /CRIMP OPTION SELECTED #23 = 800A # = 600A # = 400A SEALED TO IP69K WHEN MATED. CUSTOMER OVAL COMPANY NAME SIGNATURE ORDERS CANNOT E PLACED AGAINST ALPHA ISSUED DRAWINGS. ON RECEIPT OF CUSTOMER OVAL, THE DRAWING STATUS WILL E RAISED TO ISSUE 1. SHELL MAX CRIMP MAX CRIMP C P PP R1 R2 S STANDARD FINE STRAND +/-0.2 THREAD +/-0.2 +/-0.2 +/ ,3 3,0 3,0 3,0 1,20 1,37 1,00 1,62 3, 3, 3,91 3,91 4,93 4,93 6,15 6,15 29,36 26,97 31,75 29,36 34,93 31,75 38,10 34,93 36,5 39,7 42,9 DRAWN R.S. 20/10/2015 PC420HP-T69-**-*****-**-*-*(-L**) P.M. 20/10/2015 M.PAUL /10/2015 ALL DIMENSIONS IN MILLIMETRES TITLE: SHIELDED HIGH POWER STRAIGHT CRIMP PROD THIS DRAWING RECEPTACLE IS THE PROPERTY OF - POLAMCO IP69K LTD AND MUST NOT E USED FOR COMMERCIAL ISSUE Tel: REV. +44 (0) PULISHING - FOR THE MOST UP-TO- VERSIONS PLEASE REFER TO THE INDIVIDUAL DATASHEETS DCR A THIS DRAWING IS COPYRIGHT AND THE PROPERTY OF POLAMCO LTD POLAMCO LTD, WESTON LOCK, SHT DRAWING NO: ASSY USED ON: D38999/20, IP69K PC420HP-T69--35FS-SN-1-C(-L13) SCREENED ACKSHELL IP69K STRAIGHT ENTRY CRIMP S = STANDARD FS = FINE STRAND AND - () OPTIONAL PANEL THICKNESS IN MM (OMIT FOR STANDARD 20MM) / 1-Z ALUMINIUM / ZINC COALT OLIVE DRA OVER ELECTROLESS NICKEL 1-ZK ALUMINIUM / ZINC COALT LACK OVER ELECTROLESS NICKEL 2-Z NICKEL ALUMINIUM RONZE / SHOT LAST LIST NOT EXHAUSTIVE, FOR COMPREHENSIVE LIST AND SPECS, SEE WESITE

21 UNSHIELDED STRAIGHT MALE THREAD SQUARE FLANGE RECEPTACLE S R1 R2 VARIALE LENGTH STANDARD = 20,00 38,80 S R1 R2 VARIALE LENGTH STANDARD = 20,00 VARIALE LENGTH THREAD / LENGTH THREAD STANDARD / LENGTH = 20,00 Interconnect Solutions 38,80 Worldwide ,80 THREAD / LENGTH - S R1 R2 C - THREAD PP C - THREAD nd P PP P C - THREAD nd P CRIMP TERMINAL NOT SUPPLIED; TALE PROVIDED FOR INFORMATION PURPOSES ONLY. CRIMP TERMINAL NOT SUPPLIED; TALE PROVIDED FOR INFORMATION PURPOSES ONLY. SHELL MAX CRIMP MAX CRIMP C nd P PP R1 R2 S THREAD AX CRIMP C n D P STANDARD PP R1 R2 FINE SSTRAND THREAD +/-0.2 THREAD MAX +/-0.2 +/-0.2 +/-0.3 /LENGTH FINE STRAND +/-0.2 THREAD MAX +/-0.2 +/-0.2 +/-0.3 /LENGTH 2,3 1,2" 26,5 3, 4,93 29,36 26,97 36,5 M8 X 20 CRIMP TERMINAL NOT SUPPLIED; TALE PROVIDED 2,3 1,2" 26,5 3, 4,93 FOR 29,36 INFORMATION 26,97 36,5 PURPOSES M8 X 20 3,0 ONLY. 1,375" 31,0 3, 4,93 31,75 29,36 39,7 M10 X 3,0 1,375" 31,0 23 3, 4,93 31,75 29,36 39,7 M10 X 3,0 1,0" 34,4 3,91 6,15 34,93 31,75 42,9 M10 X SHELL MAX 3,0CRIMP 1,0" MAX 34,4 CRIMP 3,91 6,15 34,93 31,75 C 42,9 nd M10 P X 3,0PP 1,6" R1 R2 36,6S 3,91THREAD 6,15 38,10 34,93 M12 X 3,0 STANDARD 1,6" FINE 36,6 STRAND 3,91 6,15 +/ ,10THREAD 34,93 MAXM12 +/-0.2 X +/-0.2 +/-0.3 /LENGTH 2,3 3,0 1,2" 1,375" 26,5 31,0 3, 3, 4,93 29,36 26,97 4,93 31,75 29,36 36,5 39,7 M8 X 20 M10 X 23 3,0 1,0" 34,4 3,91 6,15 34,93 31,75 42,9 M10 X PC420HP-M--PN-1-C(-L13) 3,0 1,6" 36,6 3,91 6,15 38,10 34,93 M12 X PC420HP-M--PN-1-C(-L13 MALE THREAD TERMINATION MALE THREAD TERMINATION PC420HP-M--PN-1-C(-L13) AND - () AND - () MALE THREAD TERMINATION OPTIONAL PANEL THICKNESS IN MM ECTOR MIL-DTL STYLE OPTIONAL CONNECTOR PANEL THICKNESS SHELL IN MM (OMIT FOR STANDARD CONTACT 20MM) TYPE (OMIT FOR STANDARD 20MM) S CONTACTS - SILVER PLATED COPPER COPPER SEAL - SILICONE ELASTOMER AND - () OPTIONAL PANEL THICKNESS / 4V-0 IN MM MIL-DTL STYLE CONNECTOR VOLTAGE RATING 1000Va.c. / 1410Vd.c / MAXIMUM CONTACT RATING, UNLESS OTHERWISE (OMIT FOR STANDARD 1-20MM) ALUMINIUM / CADMIUM OLIVE DRA OVER ELECTROLESS / 1410Vd.c LIMITED Y /CRIMP OPTION SELECTED 1-Z ALUMINIUM / ZINC COALT OLIVE DRA OVER ELECTROLE, UNLESS OTHERWISE S 1-ZK ALUMINIUM / ZINC COALT LACK OVER ELECTROLESS PTION SELECTED 1-Z ALUMINIUM / ZINC COALT OLIVE DRA OVER ELECTROLESS NICKEL CONTACTS - SILVER PLATED COPPER #23 = 800A 1-ZK ALUMINIUM / ZINC COALT LACK OVER ELECTROLESS 1-ZN NICKEL ALUMINIUM / ZINC NICKEL LACK PASSIVATE OVER ELECTRO SEAL - SILICONE ELASTOMER # = 600A 1-ZN ALUMINIUM / ZINC NICKEL LACK PASSIVATE OVER ELECTROLESS 4-J NICKEL STAINLESS STEEL / PASSIVATE # = 400A 4-J STAINLESS STEEL / PASSIVATE 2-Z / NICKEL ALUMINIUM RONZE / SHOT LAST VOLTAGE RATING 1000Va.c. / 1410Vd.c 2-Z NICKEL ALUMINIUM 1-C RONZE / SHOT LIST LAST NOT ALUMINIUM EXHAUSTIVE, / ELECTROLESS FOR COMPREHENSIVE NICKEL LIST AND SPECS, SEE WE MAXIMUM CONTACT RATING, UNLESS OTHERWISE LIST NOT EXHAUSTIVE, FOR COMPREHENSIVE LIST AND SPECS, SEE WESITE LIMITED Y /CRIMP OPTION DRAWN SELECTEDM.PAUL 27/01/ Z ALUMINIUM / ZINC COALT OLIVE DRA OVER ELECTROLESS NICKEL NOT 1-ZK TO ALUMINIUM / ZINC PC420HP-M-**-**-*-*(-L**) COALT LACK OVER ELECTROLESS NICKEL /01/2016 #23 = 800A P.M. 27/01/2016 PC420HP-M-**-**-*-*(-L**) /01/2016# = 600A # = 400A M.PAUL /08/2014 ALL DIMENSIONS IN MILLIMETRES TITLE: 2-Z NICKEL ALUMINIUM RONZE / SHOT LAST /08/2014ALL DIMENSIONS IN MILLIMETRES TITLE: PROD LIST NOT EXHAUSTIVE, FOR COMPREHENSIVE HIGH POWER LIST AND SPECS, RECEPTACLE SEE WESITE DRAWN ANGULAR M.PAUL +/- 1 HIGH POWER 27/01/2016 RECEPTACLE PC420HP-M-**-**-*-*(-L**) P.M. 27/01/2016 ISSUE REV. DCR SEE PART Tel: NUMER +44 (0) PULISHING - FOR THE MOST UP-TO- VERSIONS PLEASE REFER TO THE INDIVIDUAL DATASHEETS 1 4 M.PAUL /08/2014 ALL DIMENSIONS IN MILLIMETRES TITLE: THIS DRAWING IS COPYRIGHT AND THE PROPERTY OF POLAMCO LTD POLAMCO LTD, WESTON LOCK, SHT WEIGHT IT MUST NOT E COPIED, USED FOR MANUFACTURE OR OTHERWISE LOWER RISTOL ROAD THIS NCAGE DRAWING IS COPYRIGHT GENERAL U5792 TOL AND THE PROPERTY OF POLAMCO LTD POLAMCO LTD, WESTON LOCK, ASSY USED ON: D38999/20 ASSY USED ON: D38999/20

22 ULKHEAD FEEDTHROUGH SQUARE FLANGE RECEPTACLE ØT OPTION 001 FOR M3 THREADED HOLES C - TYPICAL D - TYPICAL 49,30 ØT 15,80 3, OPTION 001 FOR M3 THREADED HOLES 49,30 15,80 3, A - THREAD A - THREAD A - THREAD A - THREAD END A LASER PART MARK HERE END A LASER PART MARK HERE END 15,00 MAX PANEL THICKNESS END 15,00 MAX PANEL THICKNESS EAD.3L-TS C +/-0. 36,5 39,7 42,9 D 29,4 31,8 34,9 38,1 H T MIN +/-0.13 SHELL A 32,94 36,29 39,29 42,47 23 THREAD 3,3 3,3 1,20 3,3 1,37 3,3 1,00 1,62 C +/-0. 36,5 39,7 42,9 D 29,4 31,8 34,9 38,1 H MIN 32,94 36,29 39,29 42,47 T +/ ,3 3,3 3,3 3,3 D - TYPICAL ØT ØH D - TYPICAL ØT ØH PC420HPF-SPN-1-ZN(-001) PC420HPF-SPN-1-ZN(-001) F GENERALLY TO THE REQUIREMENTS OF MIL-DTL (END A) (END ) (END A) S CONTACTS - SILVER PLATED COPPER (END ) SEAL - SILICONE ELASTOMER AND - () d.c M3 THREADED HOLE OPTION (REMOVE FOR STANDARD) - () VOLTAGE RATING 1000Va.c. / 1410Vd.c MAXIMUM CONTACT RATING M3 THREADED HOLE OPTION (REMOVE FOR STANDARD) /PLATING 1-C ALUMINIUM - ELECTROLESS NICKEL #23 = 800A 1- ALUMINIUM - CADMIUM, OLIVE DRA OVER ELECTROLESS NICKEL/PLATING # = 600A 1-C ALUMINIUM - ELECTROLESS NICKEL R OVAL 1-Z ALUMINIUM - ZINC COALT, OLIVE DRA OVER ELECTROLESS NICKEL # = 400A 1-ZK ALUMINIUM - ZINC COALT, LACK 1- OVER ALUMINIUM ELECTROLESS - CADMIUM, NICKEL OLIVE DRA OVER ELECTROLESS NICKEL SIGNATURE CUSTOMER OVAL 1-ZN ALUMINIUM - ZINC NICKEL, LACK 1-Z PASSIVATE ALUMINIUM OVER ELECTROLESS - ZINC COALT, NICKEL OLIVE DRA OVER ELECTROLESS NICKEL 4-J STAINLESS 1-ZK STEEL - PASSIVATE ALUMINIUM - ZINC COALT, LACK OVER ELECTROLESS NICKEL COMPANY NAME SIGNATURE 1-ZN ALUMINIUM - ZINC NICKEL, LACK PASSIVATE OVER ELECTROLESS NICKEL LPHA ISSUED DRAWINGS. 2-Z NICKEL ALUMINIUM RONZE - SHOT LAST THE DRAWING STATUS WILL E RAISED TO ISSUE 1. 4-J STAINLESS STEEL - PASSIVATE LIST NOT EXHAUSTIVE, FOR COMPREHENSIVE LIST AND SPECS, SEE WESITE ORDERS CANNOT E PLACED AGAINST ALPHA ISSUED DRAWINGS. 2-Z NICKEL ALUMINIUM RONZE - SHOT LAST ON RECEIPT OF CUSTOMER OVAL, THE DRAWING STATUS WILL E RAISED TO ISSUE WESTON 1. POLAMCO LTD LIST LOCK NOT EXHAUSTIVE, THIS FOR DRAWING COMPREHENSIVE IS LIST AND SPECS, SEE WESITE LOWER RISTOL ROAD COPYRIGHT AND THE DRAWN M.PAUL WESTON LOCK 13/10/ THIS DRAWING IS POLAMCO ATH A2 1EP PROPERTY OF THIS DRAWING IS LTD THE PROPERTY POLAMCO OF LTD POLAMCO LTD AND MUST NOT E USED FOR COMMERCIAL LOWER RISTOL ROAD COPYRIGHT AND THE PURPOSES WITHOUT 13/10/ MUST WRITTEN NOT E CONSENT COPIED, OF THE COMPANY. DRAWING CORRECT AT TIME OF ATH A2 1EP PROPERTY OF ALL DIMENSIONS IN MILLIMETRES 22 Tel: +44 (0) PULISHING - FOR THE MOST USED UP-TO- FOR MANUFACTURE VERSIONS PLEASE REFER TO THE INDIVIDUAL POLAMCO DATASHEETS LTD LINEAR +/-0,MM OR OTHERWISE DISCLOSED IT MUST NOT ON OUR E COPIED, WESITE ANGULAR +/- 1 ALL DIMENSIONS IN MILLIMETRES TITLE: WITHOUT PRIOR WRITTEN USED FOR MANUFACTURE PROD CONSENT OF THE COMPANY. OR OTHERWISE DISCLOSED ASSY USED ON: D38999/20 ASSY USED ON: D38999/20