Series MTD Magnetic Pump

Transcription

1 Magnetic Pump Features Close-coupled design. Polypropylene or PVDF construction. Replaceable shaft. Neodmium magnets to handle specific gravity (SG.8). Mounts to standard NEMA and IEC motor frames. Mounts to motor without disassembley. Back pullout design. Sealless design-no mechanical seals to leak. Two piece impeller design. Industries & Applications Chemical manufacturing Metal plating/working Wastewater treatment Fume scrubbing Mining Paper mills Printing Pharmaceutical processing Agriculture OEM equipment supply General pump applications Capabilities Up to 7% operating efficiency High working pressure up to 9 psi High specific gravity handling- over.8* Maximum viscosity: cp Maximum Temperature: Polypropylene - 8 F (8 C) PVDF - F ( C) Series MTD provides the latest enhanced design changes to seal less magnetic drive horizontal centrifugal pumps. Intended to provide ease and simplicity of operation the MTD series comes with a back pull out design allowing quick and easy service. MTD incorporates the strongest magnets made from Neodymium material capable of handling specific gravit to.8. The use of this strong material assures trouble free start up, hydraulically efficient and continuous duty performance. Carbon bushings allows the MTD design to ward off damage from extended dry run conditions where others fail. Pumps available with Polypro or Kynar along with optional bushings made of PTFE or silicon carbide materials handle even the most corrosive of applications making the MTD series the right choice. Bulletin A /

2 6 MTD-/ Q-H 6Hz Q-H Hz MTD-/.. FNPT Inlet X / MNPT Outlet 6 Q-H 6Hz.88 Q-H Hz.8 Head () MTD-/..... MTD-/ Flow (GPM) FNPT Inlet X MNPT Outlet.88 Impeller 6Hz.8 Impeller Hz

3 7 MTD-/ MTD-/ 6 r Feet Q-H,.8, Hz. Q-H,.6, 6Hz / FNPT Inlet X MNPT Outlet.6 Impeller 6Hz.8 Impeller Hz 7 MTD--/ Q-H 6Hz.8 MTD- & MTD-/ MTD- 6 Q-H 6Hz.7 Q-H Hz / FNPT Inlet X -/ MNPT Outlet. Impeller 6Hz.8 Impeller Hz

4 8 Q-H 6Hz.6 MTD- MTD- 6 Q-H Hz. FNPT Inlet X -/ MNPT Outlet.6 Impeller 6Hz. Impeller Hz Q-H 6Hz. MTD- 8 Q-H Hz.7 MTD FNPT Inlet X -/ MNPT Outlet. Impeller 6Hz.7 Impeller Hz

5 MTD- Q-H. 6Hz MTD- Q-H 6. Hz Closed FNPT Inlet X MNPT Outlet. Impeller 6Hz 6. Impeller Hz Model 6 HZ Impeller Diameter Pump Maximum Flow, gpm Performance Maximum TDH, Ft. HZ Impeller Diameter Pump Per Maximum Flow, gpm SPECIFICATIONS Performance Pump Maximum Inlet TDH, Ft. FNPT 6 Connections Outlet MNPT Motor RPM Volts Hertz Phase Amps MTD-/B / / / - 6/.-. NTD-/B / / / - 6/.-. MTD-/C / / / - 6/.-. MTD-/C / / / - 6/.-. MTD-/B / / 6 7./. MTD-/B / /8 -/- 6/ /.-. MTD-/B / /8-9/6-8 6/.-./.-. MTD-/C / / 6 7./. MTD-/C / /8 -/- 6/ /.-. MTD-/C / /8-9/6-8 6/.-./.-. MTD-/B / / / 6 9.6/.8 MTD-/B / / /8 -/- 6/ /.8-.6 MTD-/B / / /8-9/6-8 6/.6-.8/.-. MTD-/C / / / 6 9.6/.8 MTD-/C / / /8 -/- 6/ /.8-.6 MTD-/C / / /8-9/6-8 6/ /.8-.6 MTD-B / / / 6.6/.8 MTD-B / / /8 -/- 6/.6-.6/.8-6. MTD-B / / /8-9/6-8 6/.6-./.8-.7 MTD-C / / / 6.6/.8 MTD-C / / /8 -/- 6/.6-.6/.8-6. MTD-C / / /8-9/6-8 6/.6-./.8-.7 MTD- /B / /. / 6 /7. MTD- /B / /. /8 -/- 6/ / MTD- /B / /. /8-9/6-8 6/.-.8/.-. MTD- /C / /. / 6 /7. MTD- /C / /. /8 -/- 6/ / MTD- /C / /. /8-9/6-8 6/.-.8/.-. MTD-B / /8-9/6-8 6/.-.8/.7-.9 MTD-C / /8-9/6-8 6/.-.8/.7-.9 MTD-B / /8-9/6-8 6/ /.9-. MTD-C / /8-9/6-8 6/ /.9-. MTD-B /8-9/6-8 6/.6-/.8-6 MTD-C /8-9/6-8 6/.6-/.8-6 MTD-7 /B /8-9/6-8 6/ / MTD-7 /C /8-9/6-8 6/ / MTD-B /8-9/6-8 6/ -/.-. MTD-C /8-9/6-8 6/ -/.-.

6 Q-H 6. 6Hz Closed Q-H 7. Hz Closed MTD MTD-7-/ FNPT Inlet X MNPT Outlet 6. Impeller 6Hz 7. Impeller Hz Q-H 7. Hz Open Q-H 6. 6Hz Open MTD MTD- FNPT Inlet X MNPT Outlet 6. Open Impeller 6Hz 7. Open Impeller Hz NOMENCLATURE MTD- B- E- T CD- F MTD Materials of Construction Electrical Impeller Motor Inlet/Outlet Dia. (Inch) Voltage Enclosure Connections - - Pump - O ring - Impeller Bushing, Thrust Ring & Shaft - - Phase Cycle/Hertz - - (Volts) (hz) / / B=polypropylene C=PVDF Blank=Viton E=EPDM Blank= Carbon, PTFE, alumina ceramic Si= Silicon carbide, silicon carbide, silicon carbide =. =.6 = or / 6 Blank=TEFC EXP=explosion proof Blank=NPT F=Flange = or /6 / K=Kalrez T= PTFE, PTFE, alumina ceramic =.7 / AC= Alumina ceramic, PTFE, alumina ceramic =.88 CD=chem duty =/6 /6 -/ =.8 =7 6 6=.6 7-/ 7=. 8=. 9=. =.7 =6. =7. OPEN =6. =7.