ACCESSORIES, PARTS & SUPPLIES THERMAL ANALYSIS AND RHEOLOGY

Transcription

1 New Castle, DE USA - Telephone: Paris, France - Telephone: Brussels, Belgium - Telephone: Crawley, England - Telephone: Etten-Leur, Netherlands - Telephone: Eschborn, Germany - Telephone: Milano, Italy - Telephone: Tokyo, Japan - Telephone: Barcelona, Spain - Telephone: Melbourne, Australia - Telephone: Stockholm, Sweden - Telephone: Tokyo, Japan - Telephone: Beijing, China - Telephone: Shanghai, China - Telephone: Guangzhou, China - Telephone: Bangalore, India - Telephone: TO CONTACT YOUR LOCAL TA INSTRUMENTS TECHNICAL REPRESENTATIVE VISIT OUR WEBSITE AT THERMAL ANALYSIS AND RHEOLOGY ACCESSORIES, PARTS & SUPPLIES PA 2006 L TA INSTRUMENTS WORLDWIDE PRICE LIST Effective January 1, 2006

2 Thermal Analyzers Pages Q Series DSC Accessories, Consumables, Calibration Materials, & Replacement Parts TGA Q5000IR and Q5000SA Accessories, Consumables, & Replacement Parts TGA / SDT Accessories, Consumables, Calibration Materials, & Replacement Parts TMA Accessories, Consumables, Calibration Materials, & Replacement Parts DMA Q 800 Accessories, Consumables, Calibration Materials, & Replacement Parts DMA RSA lll Accessories, Consumables, & Replacement Parts XX Series DSC / DTA Accessories, Consumables, Calibration Materials, & Replacement Parts TGA / SDT Accessories, Consumables, Calibration Materials, & Replacement Parts TMA Accessories, Consumables, Calibration Materials, & Replacement Parts DMA Accessories, Consumables, Calibration Materials, & Replacement Parts DEA Accessories, Consumables, & Replacement Parts Micro TA Accessories, Consumables, & Replacement Parts General Computer Accessories & Software Rheometers ARES Temperature Control Options Advanced System Options Geometries for FCO Disposable Geometries for FCO Special Fixtures Geometry Testing Packages and Sample Prep Air Supply Accessories AR Peltier and Upper Heated Plate UHP Temperature Control Options Concentric Cylinders and Circulators Environmental Test Chamber ETC and Geometry Kits Concentric Cylinder Geometries Peltier Plate Geometrires (Plates and Cones) ETC and ETM Geometries and Accessories Specialty Geometries and Accessories Air Supply Accessories CSA and CSA II Accessories Miscellaneous Items Standard Oils, Rheology Texts, Printers

3 Thermal Analyzers Q Series DSC Accessories Price US $ / Pressure DSC Cell 16,600 (For use with the Q1000 and Q10P. Provides heat flow measurements at pressures from 1 Pa to 7 MPa) Q Series PDSC Cell Shipping Accessory Kit 1,160 (For use with PDSC Cell and Q1000 DSC) DSC Quench Cooling Accessory 1,130 (For quench cooling of PDSC to -150 C using liquid nitrogen) Sample Encapsulation Press 2,580 (For crimp and hermetic pan sealing) Photocalorimeter Accessory (PCA) 32,100 (For Q1000 / Q100 DSC. Provides photocuring studies between -50 & 80 C.) MDSC Thermal Conductivity Kit Accessory Kit, Q1000 / Q100 1, Accessory Kit, Q10 1,050 Q Series DSC Cooling Accessories Finned Air Cooling System (FACS) 1,710 (For programmed air cooling of Q Series DSC Cell from 725 C to ambient temperature) Quench Cooling Accessory for FACS 1,170 (Assists FACS in rapid cooling of Q Series DSC Cell to ambient temperature) Refrigerated Cooling System (RCS) V / 60 Hz 9,980 (For programmed or quench cooling of the Q Series DSC cell over the temperature range 550 to -90 C. Sealed refrigeration system does not require liquid nitrogen) Refrigerated Cooling System (RCS) V / 50 Hz 9, RCS Dryer 400 (For removal of trace moisture in purge gases) Pressure Regulator (use in USA only) 550 (For use with the RCS Dryer or the LNCS Purge Gas Purifier Unit 4,000 psi input; 40 psi output; CGA) Liquid Nitrogen Cooling System (LNCS) 12,200 (For programmed or quench cooling of the Q1000 and Q100 DSC cells from 550 to -180 C. Can be automatically refilled from an external LN2 source LNCS DSC Purge Gas Purifier Unit 3,300 (For removal of trace moisture in purge gases. Includes gas dryer unit and appropriate shut-off and by-pass valving) Quench Cooling Accessory (QCA) 1,610 (For rapid manual cooling of Q Series DSC Cell to subambient temperatures) If used with the Q1000 / Q100 the following parts must be added: 3

4 Inner Manual Lid Outer Manual Lid Manual Cell Cover 230 Q Series Replacement DSC Cells (Replacement Q Series DSC cells do not include silver lids or accessory kits) Q1000 Cell 6, Q100, Q10 Cell (Requires installation by TA Service Engineer) 6,410 Q Series DSC Field Upgrades Mass Flow Controller Upgrade Kit for Q100 / Q10 4,500 (Includes Field Service Installation) MDSC Upgrade Kit for Q100 10,700 (Includes Field Service Installation) Autosampler Upgrade Kit for Q100 24,000 (Includes Field Service Installation) Q Series DSC Modules - Replacement Parts Accessory Kit, DSC Q1000 / Q100 (Supplied with Q1000 / Q100 modules) 1, Accessory Kit, DSC Q10 (Supplied with the Q10 module) 1, Tweezers, Curved Inner Lid, Tube Assembly Lid, Upper, Auto Cell Cleaning Brush Screw, Cell Hold down, DSC Autolid Bias Spring Spring Clamp, Autolid Gasket, Cooling Assembly 20 DSC Sample Pans and Lids Platinum pans (package of 10) 1, Aluminum pans (package of 200) Aluminum lids (package of 200) Aluminum pans, hermetic (package of 200) Aluminum lids, hermetic (package of 200) High pressure pan kit 2,990 (includes metal bell jar & lid, crimping tool, 5 reusable SST capsules & 20 seals) High pressure capsule seals (package of 20) High pressure capsules (package of 5) 1, High volume pan kit 3,710 (Includes metal bell jar & lid, die set, and 100 pans, lids & seals) High volume die set 1, High volume pans, lids & seals (package of 100) 1, Hermetic lids with pin hole (package of 20) Coated aluminum pans, hermetic (package of 200) Coated aluminum lids, hermetic (package of 200) Aluminum pans for SFI samples (package of 200) Gold pans (package of 10) Gold lids (package of 10) Gold pans, hermetic (package of 10) 1, Gold lids, hermetic (package of 10) Copper pans (package of 200) Graphite pans (package of 10) Graphite lids (package of 10) 355 DSC Sample Press Replacement Parts Upper crimping die set assembly Lower crimping die assembly Preforming tool. For sealing hermetic pans (Blue Press) Spring for lower crimping dye Die, hermetic sealing 150 DSC Calibration Materials Kit, Tzero Calibration, Sapphire Sapphire, MDSC Calibration DSC / DTA temperature calibration kit 1, Replacement certified Indium reference material (for p/n kit) Tin calibration material Indium calibration material Zinc calibration material Sapphire specific heat material (0.160" OD x 0.020" thick, for standard pans) Sapphire specific heat material (0.135" OD x 0.020" thick, for hermetic pans) Sapphire specific heat material (0.187" OD x 0.034" thick, for standard pans) Anisic Acid (1g)

5 Biphenyl (1g) Kit, DSC Oxidative Stability Calibration 1,830 Q Series Photocalorimeter Accessories & Spare Parts Dual Liquid Light Guide for PCA 5,890 (-50 to 80 C operation; requires RCS for subambient use) Dual Quartz Light Guide for PCA 6,600 (-50 to 250 C operation; requires RCS for subambient use) PCA Accessory Kit (replacement only) 6,500 TA supplied items required for photocalorimeter operation by customer who already has, or will separately obtain, the EXFO analyzer and appropriate dual light guide Filter, Internal, nm 1, Air Filter Kit, Pkg of Filter, Longpass, 390 nm (Pkg of 2) Filter, Longpass, 490 nm (Pkg of 2) Filter, Neutral Density, 1 % Filter, Neutral Density, 10 % Lamp, 100 W, Mercury 1,670 Q5000 IR Accessories Sample Encapsulation Press 2,850 (For sealing of Q5000 IR aluminum pans / lids as defined below; requires kit PN ) Aluminum sealed pan kit 1,990 (Consists of 100 pans;100 lids, 30 bails, punch allignment tool; crimp die; crimping tool for use with the Sample Encapsulation Press - see above for part number) TGA / MS Interface Kit 3, Accessory Kit, Q5000 IR (Supplied with the Q5000 IR module) 5,150 Q5000 IR Sample Pans Platinum sample pans, 50 µl (package of 3) Platinum sample pans, 100 µl (package of 3) Ceramic sample pans, 100 µl (package of 3) Ceramic sample pans, 250 µl (package of 3) Aluminum sample pans, 80 µl (package of 100) Aluminum Lids (package of 100) Stainess Steel Bail (package of 15) Kit Sample Pan Quartz (Pkg of 3) - Requires Autosampler Tray PN Q5000 IR Replacement Parts Tray Autosampler TGA Tray Autosampler 610 Standard with Q5000 SA; Option for Q5000 IR w/quartz Crucibles Loop Decoupler Kit Heat Exchanger 2, Heat Exchanger Conditioning Kit Sample Nickel Wire (uncalibarted) Spatula SST Brass Tweezers Calcium Oxalate Monohydrate Hook Hangdown Tube Load Q5000 IR Sample Tube Load Q5000 IR Reference TGA Weight Set Calibrated 125 Q5000 SA Accessories RCS Dryer 400 (For removal of trace moisture in purge gases; one unit supplied with the Q5000 SA) Q5000 SA Sample Pans Kit Sample Pan Quartz (Pkg of 3) Platinum sample pans, 50 µl (package of 3) 585 Requires PN (see below) for use with Q5000 SA Platinum sample pans, 100 µl (package of 3) 655 Requires PN (see below) for use with Q5000 SA) Q5000 SA Replacement Parts Tray Autosampler Humidity Chamber (10 position) Tray Autosampler TGA (25 position) 825 Required for use with Platinum or Aluminum Pans Loop Decoupler Kit Hook Hangdown Heat Exchanger 2, Heat Exchanger Conditioning Kit Spatula SST

6 Brass Tweezers Tube Load Q5000 SA Sample / Reference 55 Q500 / Q50 TGA Accessories & Field Upgrades Upgrade Kit, TGA High Resolution 5,360 (Upgrades Q500 for High Resolution operation. Includes field installation) Upgrade Kit, Modulated TGA 4,280 (Upgrades Q500 for Modulated TGA operation. Includes field installation) Upgrade Kit, Q500 Autosampler 10,900 (Upgrades Q500 for autosampler operation. Includes field installation) Evolved Gas Furnace (EGA) 4,250 (Recommended for evolved gas analysis with MS or FTIR.) Accessory Kit TGA (Supplied with Q500 / Q50 modules) $2,840 Q500 / Q50 Sample Pans Platinum sample pans, 100 µl (package of 3) Ceramic sample pans, 100 µl (package of 3) Platinum sample pans, 50 µl (package of 3) Ceramic sample pans, 250 µl (package of 3) Ceramic sample pans, 500 µl (package of 3) Aluminum sample pans, 100 µl (package of 12) 180 Q500 / Q50 Replacement Parts Brass tweezers Sample hang-down wire Tare hang-down wire Wire hangdown tare (w/o tare tube) - used in latest Q500 / Q50 TGA Tube, Hangdown Wire Kapton hangdown loop (strip of 10) Sample thermocouple Auto Q500 multiple sample tray kit 1, Furnace tube (quartz) / Seals kit / Instructions for EGA furnace Rebuilt Q500, Q50 furnace 5, Q500, Q50 Damaged Furnace Exchange Credit 1, Heat Exchanger, TGA Q500 / Q50 2, Conditioning Kit, TGA Q500 / Q50 Heat Exchanger 30 Q5000 / Q500 / Q50 Calibration and Test Materials TGA / SDT ICTAC Curie Point Reference Materials Kit 1,760 (Includes 0.5 g each of the six ICTAC certified material listed below) Replacement ICTAC Certified Curie Point Reference Material 153 C Replacement ICTAC Certified Curie Point Reference Material 357 C Replacement ICTAC Certified Curie Point Reference Material 554 C Replacement ICTAC Certified Curie Point Reference Material 746 C Replacement ICTAC Certified Curie Point Reference Material 931 C Replacement ICTAC Certified Curie Point Reference Material 1116 C TGA / SDT temperature calibration kit (Alumel & Nickel reference materials) 1, Replacement certified nickel reference material (for kit p/n ) Replacement certified alumel reference material (for kit p/n ) TGA / SDT Mass Loss Reference Materials Kit 1,760 (Includes 1 gm each of the three material listed below) Mass Loss Reference Material ( 2% solution) Mass Loss Reference Material ( 49% solution) Mass Loss Reference Material ( 98% solution) Set of class M weights (100 mg, 1 g) 1, Calcium oxalate 60 SDT Q600 Sample Pans Alumina sample cups; 90 µl (package of 3) Alumina sample cups;40 µl (package of 3) Platinum sample cups; 40 µl (package of 3) Platinum sample cups; 110 µl (package of 3) Alumina lids; package of 3 (for use with p/n ) 75 SDT Q600 Replacement Parts Accessory Kit Q600 (Supplied with the Q600 module) 2, Dual Beam Thermocouple Kit, SDT Q600 1, Brass tweezers O-ring, furnace tube Calibration weights set Contact thermocouple wire Q600 SDT Furnace 7, Q600 SDT Furnace Exchange Credit 1,

7 SDT Q600 Calibration and Test Materials TGA / SDT ICTAC Curie Point Reference Materials Kit 1,760 (Includes 0.5 g each of the six ICTAC certified material listed below) Replacement ICTAC Certified Curie Point Reference Material 153 C Replacement ICTAC Certified Curie Point Reference Material 357 C Replacement ICTAC Certified Curie Point Reference Material 554 C Replacement ICTAC Certified Curie Point Reference Material 746 C Replacement ICTAC Certified Curie Point Reference Material 931 C Replacement ICTAC Certified Curie Point Reference Material 1116 C TGA / SDT temperature calibration kit (Alumel & Nickel reference materials) 1, Replacement certified nickel reference material (for kit p/n ) Replacement certified alumel reference material (for kit p/n ) Aluminum oxide reference material (calcined alpha) TGA / SDT Mass Loss Reference Materials Kit 1,760 (Includes 1 gm each of the three material listed below) Mass Loss Reference Material (2% solution) Mass Loss Reference Material (49% solution) Mass Loss Reference Material (98% solution) Zinc Calibration Material Calcium oxalate 60 TMA Q400 / 400EM Accessories and Upgrade Kits Mechanical Cooling Accessory (115 V operation) 8,830 (For programmed or quench cooling of the Q400/Q400EM/2940 over temperature range 400 to -60 C. Sealed refrigeration system does not require liquid nitrogen) Mechanical Cooling Accessory (230 V operation) 8, TMA Film/Fiber Accessory Kit 3,070 (Consisting of film / fiber sample stage, film / fiber probe assembly, vial of cleaved aluminum balls, film clamp assemblies, film clamp fixture, jeweler's screwdriver, and film clamp screws) Dilatometer Accessory Kit 2,500 (Consisting of dilatometer probe assembly, three dilatometer sample vials, two vials of filling medium, and a vial of aluminum calibration standard) Flexure Accessory Kit (for Q400 use; supplied with Q400EM) 1,950 (Includes flexure probe assembly, flexure sample platform & phase cal jig) Parallel Plate Rheometer Accessory Kit 2,960 (Consisting of rheometer sample-forming die set, three rheometer alignment cages, and six rheometer parallel plates) Flow Meter 460 For purge gas regulation (14.8 to 148 ml / min) of earlier TMA Q400 / 400EM without mass flow control. A digital mass flow controller upgrade is highly recommended - contact TA Service) Accessory Kit Q400 (Supplied with Q400 / Q400 EM modules) 5,000 Note: the Flexure Accessory Kit (PN ;901) is also supplied with the Q400 EM; a customer wanting to replace the entire Q400 EM Accessory Kit must purchase PN and PN Upgrade Kit Q400 to Q400EM 7,500 (Includes Flexure Accessory Kit PN ) TMA Q400 / 400EM Replacement Parts Sample stage Expansion probe assembly 1, Macro-expansion probe assembly 1, Dilatometer probe assembly 1, Dilatometer sample vial Hemispherical probe assembly 1, Penetration probe assembly 1, Flexure probe assembly 1, Point bend calibration jig Platform Flexure Film / Fiber sample holder 1, Film / Fiber probe assembly 1, Film / Fiber Upper Clamp Film / Fiber Lower Clamp Film clamp fixture Film clamp screws #0-80 (package of 10) Vial of cleaved aluminum balls Sample vial - dilatometer Filling medium - dilatometer vial Protective quartz for sample stage (pkg of 20) Thermocouple, TMA kit 225 TMA Q400 / 400EM Calibration Materials Replacement certified Indium reference material TMA certified temperature and dimension calibration kit 1, Replacement certified aluminum reference material

8 Q800 DMA Accessories Gas Cooling Accessory - auto tank fill (CE compliant) 10, Air Compressor 2, Accessory Kit, Q800 (Supplied with the Q800 module) 3,420 Q800 DMA Clamp Kits mm Single / Dual Cantilever Clamp Kit 2, mm Single / Dual Cantilever Clamp Kit 2, mm Single / Dual Cantilever Clamp Kit (supplied with DMA Q800) 2, Three-point Bending Clamp Kit (5, 10, and 15 mm lengths) 2, Three-point Bending Clamp Kit (20 and 50 mm lengths) 2, Parallel Plate Compression Clamp Kit (includes 15 and 40 mm plates) 4, Penetration Clamp Kit 2, Film / Fiber Tension Clamp Kit 2, Specialty Fiber Tension Clamp Kit 2, Shear Sandwich Clamp Kit 2, Submersion Compression Clamp Kit 6, Submersion Film / Fiber Tension Clamp Kit 8, Three Point Bend Clamp Kit (50 mm, Low Friction) 3, Three Point Bend Clamp Kit (20 mm, Low Friction) 3, Film Cutting Kit 740 Q800 DMA Replacement Parts Replacement Furnace 4, Brass tweezers Telescoping gage (for 10 mm single cantilever clamps) Telescoping gage (for 17 mm single cantilever clamps) Control thermocouple (90 mm length) Sample thermocouple (130 mm length) Furnace inlet ferrule / spring kit Filter / Regulator with Auto Drain 1, Filter Replacement, Auto Drain Regulator 85 Q800 DMA Calibration and Test Materials Glass support cloth (0.2 mm thick, 33 m length) ABS sample (3.18 mm thick, 61 mm long, pkg of 5) ABS sample (3.18 mm thick, 36 mm long, pkg of 5) Polycarbonate sample (1.6 mm thick, 36 mm long, pkg of 5) Polycarbonate sample (0.79 mm thick, 36 mm long, pkg of 5) Polyethylene terephthalate (PET) film (pkg of 10 pieces, 38 mm long) PET fiber (910 mm long) 50 RSA III Temperature Options FCO Mechanical Chiller Panel 7,700 NOTE: Requires Customer to Purchase Polycold PGC 152 mechanical Chiller directly from Polycold FCO Liquid Nitrogen Controller Option 16,300 RSA III Software Orchestrator Polymer Library 3,480 RSA III Advanced Options Waveform and Fast Sampling Option Waveform and Fast Sampling Option Upgrade (For ARES V5, V6, or V8) 5,240 RSA III DETA: Dielectric Thermal Analysis Option NOTE: Hewlett Packard #HP4284A LCR Meter is model provided with DETA options including a bridge. Customers must supply this bridge if purchasing option without bridge included RSA III Dielectric Thermal Analysis Option, Includes Bridge, 34, VAC 60 Hz NOTE: Includes HP4284A LCR Meter and 25 mm Parallel Plates RSA III Dielectric Thermal Analysis Tooling, Bridge Not Included, 12, VAC, 60 Hz NOTE: Includes 25 mm Parallel Plates & Interface for customer supplied HP4284A Bridge. Fixtures Three-Point Bending Fixture 2, Cantilever Bending Fixture 2, Film/Fiber Fixture 2, Parallel Plate Fixture 2, mm Plates for Parallel Plate Fixture mm Plates for Parallel Plate Fixture mm Plates for Parallel Plate Fixture Shear Sandwich Fixture 3, UV Curing Shear Sandwich Fixture 11, Contact Lens Fixture 2, RSA III Tension Submersion Fixture 8,160 13

9 Miscellaneous Accessories Air Dryer 2, Adaptors for RSA2 Tools XX DSC Accessories and Replacement Parts Replacement 2920 DSC Cells (Accessory kits and instruction manuals not supplied) Replacement Standard DSC Cell , Replacement Standard DSC Cell CE Compliant 5, Replacement Standard DSC-RCS Cell , Replacement Standard DSC-RCS Cell CE Compliant 5, Replacement Dual Sample DSC Cell , Replacement Dual Sample DSC Cell CE Compliant 6, Replacement Dual Sample DSC-RCS Cell , Replacement Dual Sample DSC-RCS Cell CE Compliant 6,970 Replacement 2910 DSC Cells (Accessory kits and instruction manuals not supplied) Replacement Standard DSC Cell , Replacement Standard DSC-RCS Cell ,970 Replacement DSC 2010 Cell Replacement DSC Cell (Requires installation by TA Service Engineer) 5,020 DSC 2920 and DSC 2910 Accessories DSC Quench Cooling Accessory 1,130 (For programmed cooling operation to -120 C, and quench cooling to -180 C. using liquid nitrogen. Includes bell jar, O-ring, and thermal resistor disc) Sample Encapsulation Press 2,580 (For crimp and hermetic pan sealing) DSC 2920 and DSC 2910 Accessories Flow Meter 460 For purge gas regulation ( ml / min. air). Stainless steel float, R-2-15-AAA tube, valve location at inlet, In / Out connections at back, brass fittings for 1/4 inch (6.35 mm) I.D. hose, tripod base with level. Also includes 25 feet (7.64 m) of 1/4 inch (6.35 mm) tygon tubing Dual Flow Meter 690 For purge gas regulation ( ml / min. air). Stainless steel floats, two R-2-15-AAA tubes, valve location at inlet, In / Out connections at back, brass fittings for 1/4 inch (6.35 mm) I.D. hose, tripod base with level. Also includes 25 feet (7.64 m) of 1/4 inch (6.35 mm) tygon tubing Gas Switching Accessory 3,650 (Automatically switches between two purge gases with manual override) Modulated DSC Upgrade Kit for DSC ,000 DSC Sample Pans and Lids Platinum pans (package of 10) 1, Aluminum pans (package of 200) Aluminum lids (package of 200) Aluminum pans, hermetic (package of 200) Aluminum lids, hermetic (package of 200) High pressure pan kit 2,990 (includes metal bell jar & lid, crimping tool, 5 reusable SST capsules & 20 seals) High pressure capsule seals (package of 20) High pressure capsules (package of 5) 1, High volume pan kit 3,710 (Includes metal bell jar & lid, die set, and 100 pans, lids & seals) High volume die set 1, High volume pans, lids & seals (package of 100) 1, Hermetic lids with pin hole (package of 20) Coated aluminum pans, hermetic (package of 200) Coated aluminum lids, hermetic (package of 200) Aluminum pans for SFI samples (package of 200) Gold pans (package of 10) Gold lids (package of 10) Gold pans, hermetic (package of 10) 1, Gold lids, hermetic (package of 10) Copper pans (package of 200) Graphite pans (package of 10) Graphite lids (package of 10) 355 DSC Replacement Parts Bell jar for DSC Cells Bell jar for DSC Cooling Accessory Sample encapsulation press upgrade kit (includes lower die) 1, Spring for lower crimping die Die, hermetic sealing

10 Preforming tool. For hermetic pans (Beige Press) DSC Cell fiberglass cleaning brush Silver lid (standard cell) Silver Inner lid # 1 (RCS cell) Cell Lid, Silver w/hole # Lid Cooling Can SST # Lid, Aluminum # Silver lid (pressure DSC cell) 280 DSC Calibration Materials DSC / DTA temperature calibration kit 1, Replacement certified Indium reference material (for p/n kit) Tin calibration material Indium calibration material Zinc calibration material Sapphire specific heat standard (0.160" OD x 0.020" thick, for standard pans) Sapphire specific heat standard (0.135" OD x 0.020" thick, for hermetic pans) Sapphire specific heat standard (0.187" OD x 0.034" thick, for standard pans) Anisic Acid Biphenyl Kit, DSC Oxidative Stability Calibration 1, MDSC Thermal Conductivity Kit 990 Auto DSC 29X0 Replacement Parts Aluminum pans, standard (package of 200) Aluminum lids, standard (package of 200) Aluminum pans, hermetic (package of 200) Aluminum lids, hermetic (package of 200) Auto DSC sample pans, copper (package of 200) Auto DSC sample pan lower die for sample press Auto Sampler silver lid (standard cell) Auto Sampler silver lid (RCS cell) Sample tray, lid Gripper Assembly Sample tray, multiposition 630 DPC 931 / 930 Replacement Part Lamp, DPC, 200 W Hg. 820 High Temperature DTA Replacement Parts Pt-Pt/13% Rh thermocouple assembly (matched pair - for 2910 DTA Cell) Pt-Pt/13% Rh thermocouple assembly (matched pair - for 2920 DTA Cell) Alumina furnace tube (For 1600 C DTA Cell) Platinum micro sample cups (package of 4) 1, Platinum macro sample cups (package of 4) 1, Platinum macro sample cap liners (package of 10) Alumina macro sample cup liners (package of 6) Aluminum oxide reference material 65 TGA 2950 / 2050 Accessories & Field Upgrades Evolved Gas Furnace (EGA) for TGA 2950 / ,270 Recommended for evolved gas analysis with MS or FTIR Evolved Gas Furnace (EGA) for TGA 2950 / CE Compliant 7,700 Recommended for evolved gas analysis with MS or FTIR Flow Meter 460 For purge gas regulation ( ml / min. air). See page 9 for full description Dual Flow Meter 690 For purge gas regulation ( ml / min. air). See page 9 for full description Gas Switching Accessory - CE Compliant 3,650 Automatically switches between two purge gases with manual override provided. Compatible with the TGA 2050, TGA 2950, and SDT Upgrade Kit, Auto TGA 10,900 Upgrades TGA 2950 for autosampler operation. Includes field installation Upgrade Kit, TGA High Resolution 5,360 Upgrades TGA 2950 for High Resolution operation. Includes field installation Upgrade Kit, Modulated TGA 4,280 Upgrades TGA 2950 for Modulated TGA operation. Includes field installation TGA 2950 / 2050 Sample Pans Platinum sample pans, 100 µl (package of 3) Ceramic sample pans, 100 µl (package of 3) Platinum sample pans, 50 µl (package of 3) Ceramic sample pans, 250 µl (package of 3) Ceramic sample pans, 500 µl (package of 3) Aluminum sample pans, 100 µl (package of 12)

11 TGA 2950 / 2050 Replacement Parts Brass tweezers Set of class M weights (100 mg, 1 g) 1, Rebuilt TGA 2950 furnace 5, Damaged Furnace Exchange Credit 1, Sample hang-down wire Tare hang-down wire Sample thermocouple Work surface tray Accessory Kit, TGA , Tube, Hangdown Wire Heat Exchanger, TGA , Auto TGA 2950 multiple sample tray kit 1, Kapton hangdown loop (strip of 10) Furnace tube (quartz) / Seals kit / Instructions for EGA furnace Conditioning Kit, TGA 2950 / 2050 Heat Exchanger 30 TGA 2950 / 2050 Calibration, Reference and Test Materials TGA / SDT ICTAC Curie Point Reference Materials Kit 1,760 (Includes 0.5 g each of the six ICTAC certified material listed below) Replacement ICTAC Certified Curie Point Reference Material 153 C Replacement ICTAC Certified Curie Point Reference Material 357 C Replacement ICTAC Certified Curie Point Reference Material 554 C Replacement ICTAC Certified Curie Point Reference Material 746 C Replacement ICTAC Certified Curie Point Reference Material 931 C Replacement ICTAC Certified Curie Point Reference Material 1116 C TGA / SDT temperature calibration kit (Alumel & Nickel reference materials) 1, Replacement certified nickel reference material (for kit p/n ) Replacement certified alumel reference material (for kit p/n ) TGA / SDT Mass Loss Reference Materials Kit 1,760 (Includes 1 gm each of the three material listed below) Mass Loss Reference Material (2% solution) Mass Loss Reference Material (49% solution) Mass Loss Reference Material (98% solution) Calcium oxalate 60 SDT 2960 Accessories Flow Meter 460 For purge gas regulation ( ml / min. air). Stainless steel float, R-2-15-AAA tube, valve location at inlet, In / Out connections at back, brass fittings for 1/4 inch (6.35 mm) I.D. hose, tripod base with level. Also includes 25 feet (7.64 m) of 1/4 inch (6.35 mm) tygon tubing Dual Flow Meter 690 For purge gas regulation ( ml / min. air). Stainless steel floats, two R AAA tubes, valve location at inlet, In / Out connections at back, brass fittings for 1/4 inch (6.35 mm) I.D. hose, tripod base with level. Also includes 25 feet (7.64 m) of 1/4 inch (6.35 mm) tygon tubing Gas Switching Accessory - CE Compliant 3,650 (Automatically switches between two purge gases with manual override) SDT 2960 Sample Pans Alumina sample cups; 90 µl (package of 3) Alumina sample cups;40 µl (package of 3) Platinum sample cups; 40 µl (package of 3) Platinum sample cups; 110 µl (package of 3) Alumina lids; package of 3 (for use with p/n ) 75 SDT 2960 Replacement Parts Brass tweezers O-ring, furnace tube Dual Beam Thermocouple Kit, SDT , Contact thermocouple wire 140 SDT 2960 Calibration, Reference and Test Materials TGA / SDT ICTAC Curie Point Reference Materials Kit 1,760 (Includes 0.5 g each of the six ICTAC certified material listed below) Replacement ICTAC Certified Curie Point Reference Material 153 C Replacement ICTAC Certified Curie Point Reference Material 357 C Replacement ICTAC Certified Curie Point Reference Material 554 C Replacement ICTAC Certified Curie Point Reference Material 746 C Replacement ICTAC Certified Curie Point Reference Material 931 C Replacement ICTAC Certified Curie Point Reference Material 1116 C TGA / SDT temperature calibration kit 1,000 (Alumel & Nickel reference materials) Replacement certified nickel reference material (for kit p/n ) Replacement certified alumel reference material (for kit p/n ) Aluminum oxide reference material (calcined alpha)

12 TGA / SDT Mass Loss Reference Materials Kit 1,760 (Includes 1 gm each of the three material listed below) Mass Loss Reference Material (2% solution) Mass Loss Reference Material (49% solution) Mass Loss Reference Material (98% solution) Calcium oxalate Zinc Standard Material Calibration weights set 195 TMA 2940 Accessories Mechanical Cooling Accessory (115 V operation) 8,830 For programmed or quench cooling of the TMA 2940 over temperature range 400 to -60 C. Sealed refrigeration system does not require liquid nitrogen Mechanical Cooling Accessory (230 V operation) 8, Film/Fiber Accessory Kit 3,070 (Consisting of film / fiber sample stage, film / fiber probe assembly, vial of cleaved aluminum balls, film clamp assemblies, film clamp fixture, jeweler's screwdriver (2 mm), and ten film clamp screws (#0-80)) Dilatometer Accessory Kit 2,500 (Consisting of dilatometer probe assembly, three dilatometer sample viles, two vials of filling medium, and a vial of aluminum calibration standard) Flexure Accessory Kit 1,950 (Includes flexure probe assembly and flexure sample platform) Parallel Plate Rheometer Accessory Kit 2,960 (Consisting of rheometer sample-forming die set, three rheometer alignment cages, and six rheometer parallel plates) Flow Meter 460 For purge gas regulation ( ml / min. air). TMA 2940 Replacement Parts Sample stage Expansion probe assembly 1, Macro-expansion probe assembly 1, Dilatometer probe assembly 1, Dilatometer sample vile Hemispherical probe assembly 1, Penetration probe assembly 1, Flexure probe assembly 1, Film / Fiber sample holder 1, Film / Fiber Upgrade Kit- 2,320 Includes Q400 probe, clamps and clamping fixture Film / Fiber Upper Clamp Film / Fiber Lower Clamp Film clamp screws #0-80 (package of 10) Film clamp fixture Vial of cleaved aluminum balls Protective quartz for sample stage Thermocouple, TMA kit 225 TMA 2940 Calibration and Reference Materials Replacement certified Indium reference material TMA certified temperature and dimension calibration kit 1, Replacement certified aluminum reference material 645 DMA 2980 Accessories Gas Cooling Accessory - auto tank fill (CE compliant) 10, Air compressor accessory 2, Flow Meter (For purge gas regulation ( L / min air) 460 DMA 2980 Clamp Kits mm Single / Dual Cantilever Clamp Kit 2, mm Single / Dual Cantilever Clamp Kit 2, mm Single / Dual Cantilever Clamp Kit (supplied with DMA 2980) 2, Three-point Bending Clamp Kit (5, 10, and 15 mm lengths) 2, Three-point Bending Clamp Kit (20 and 50 mm lengths) 2, Parallel Plate Compression Clamp Kit (includes 15 and 40 mm plates) 4, Penetration Clamp Kit 2, Film / Fiber Tension Clamp Kit 2, Specialty Fiber Tension Clamp Kit 2, Shear Sandwich Clamp Kit 2, Submersion Compression Clamp Kit 1, Submersion Film / Fiber Tension Clamp Kit 3, Film Cutting Kit 740 DMA 2980 Replacement Parts Brass tweezers Telescoping gage (for 10 mm single cantilever clamps) Telescoping gage (for 17 mm single cantilever clamps)

13 Furnace inlet ferrule / spring kit Compression Disc (40 mm) Compression Disc (15 mm) Service manual, DMA Filter / Regulator with Auto Drain 1, Filter Replacement, Auto Drain Regulator Glass support cloth (0.205 mm thick, m length) Control thermocouple (89 mm length) Sample thermocouple (130 mm length) 190 DMA 2980 Calibration and Test Materials ABS sample (3.18 mm thick, 61 mm long, pkg of 5) ABS sample (3.18 mm thick, 36 mm long, pkg of 5) Polycarbonate sample (1.59 mm thick, 36 mm long, pkg of 5) Polycarbonate sample (0.79 mm thick, 36 mm long, pkg of 5) Polyethylene terephthalate (PET) film (pkg of 10 pieces, 38 mm long) PET fiber (910 mm long) 50 DEA 2970 Accessories and Replacement Parts Flow Meter 460 For purge gas regulation ( L / min. air). SS float, valve location at inlet, In / Out connections at back, brass fittings for 1/4 inch (6.35 mm) Id. hose, tripod base with level. Includes 25 feet (6.7 m) of 1/4 inch (6.35 mm) tygon tubing) Parallel Plate Ram Kit (range -150 to 500 C) 4,250 Accessory kit contains a parallel plate assembly, 10 bottom parallel plate sensors, 10 top parallel plate sensors, 20 sets of drip pans, 30 spring probes, reference samples and tweezers Single Surface Ram Kit (range -150 to 500 C) 4,250 Accessory kit contains a single surface ram assembly, 10 single surface sensors, 20 sets of drip pans, 60 pointed spring probes, reference samples and tweezers Sputter Coated (thin film) Accessory Kit (range -150 to 500 C) 1,740 Accessory kit contains 10 bottom parallel plates, 10 top parallel thin film sensors, sputter coated mask, 20 sets of drip pans, PET reference samples, and tweezers Dryer Assembly (for drying purge gas) 1, Parallel plate sensors (package of 10) Single surface sensors (package of 10) Spring probe kit (package of 30) Foil rounds for DEA drip pans (package of 20) Foil rounds w / holes for DEA drip pans (package of 20) Sputter coated (thin film) sensors (package of 10 sets) Single surface drip cover (package of 30) µta 2990 Accessories and Replacement Parts Replacement Monitor (b/w, 110 / 120 V) 1, Replacement Monitor (b/w, 230 / 240 V) 1, Scanner, dry 5, Thermal probe (package of 5) 1, Thermal probe Sample mounting stubbs (package of 20) Thermal reference probe Anisic Acid (1g) Biphenyl (1g) PET Certified calibration material 665 General Computer Accessories and Software Ethernet Switch Thermal Advantage Library Software 4, Upgrade Kit Advantage Software 1,500 (Upgrades older OS/2 and Thermal Solutions software to latest version of Advantage software. Older systems may also need a GPIP board upgrade - contact your TA Representative for information and pricing HP Color Inkjet Printer V / 60 Hz HP Color Inkjet Printer V / 50 Hz 570 General Information Minimum order requirements: $100. All prices f.o.b. shipping point. Prices and specifications are those in effect at the time of printing and are subject to change without notice. International prices are additional in most countries. All orders are subject to final acceptance.n 23

14 Rheometers ARES Rheometers ARES Temperature Control Options Price US $ / FCO Liquid Nitrogen Controller Option for ARES V6 and V8 Only 16, FCO Mechanical Chiller Panel 7,700 NOTE: Requires Customer to Purchase Polycold PGC 152 mechanical Chiller directly from Polycold Sealed Recirculating Fluids Bath 10,400 NOTE: Requires ARES Computer Controlled Circulator (Part#'s or ) for temperature control ARES Computer Controlled Circulator, 110 VAC, 60 Hz 6,880 NOTE: Use for temperature contorl of Sealed Recirculating Bath, ARES Computer Controlled Circulator, 230 VAC, 50 Hz 6,880 NOTE: Use for temperature contorl of Sealed Recirculating Bath, Peltier Circulator (110 VAC, 60 Hz) Peltier Circulator (230 VAC, 50 Hz) 1,020 ARES Software Orchestrator Polymer Library 3,480 ARES Advanced Options Waveform and Fast Sampling Option Upgrade (For ARES V5, V6, or V8) 5, Optical Analysis Module, OAM II 35,900 NOTE: Requires Optical Parallel Plate or Couette Separately. Adjustable height support required for FCO systems used with OAM II (part# ) Optical Parallel Plate; includes: 5, mm upper and lower glass parallel plates for use with OAMII Optical Couette Kit; includes: 12, mm OD Upper stainless bob and 34 mm ID stainless/glass cup; for use with OAMII at ambient use only; requires V5.xx.xx or higher firmware and 2KFRTN1 transducer OAMII Adjustable FCO Height Support 1, Electro-Rheological Analysis Option for 2KFRT Transducers 31, Electro-Rheological Analysis Option for 1KFRT Transducers 31, ARES Photo-Curing Option: 14,700 Accessory for rheological characterization of UV curable materials. Includes upper tool with removable 20 mm quartz plate, lower disposable tool, with 20 mm stainless steel plate (for ambient operation), light source mount and collimator, polycarbonate UV light Shield, 5 mm light guide, remote radiometer/dosimeter, Waveform & Fast Sampling interface cable for triggering light source (for Exfo Novacure only), two pair UV safety glasses, trimming tool. Optional disposable acrylic upper and aluminum lower plates are available for rigid UV coatings. Option can be used with the ARES Peltier Plate (-30 C to 150 C) and Bath (-10 C to 140 C) temperature control systems for samples that can be removed after curing. Notes: Accessory does not include UV light source. Customer must supply Exfo Novacure UV light source separately to interface with option. Necessary data acquisition rates, and light source shutter and exposure time control trigger, are only available when option used with ARES Waveform and Fast Sampling Option (part# or ). Minimum instrument requirements: Orchestrator version 7.0, ARES firmware version 8 or ARES UV-Curing Option: 36,000 Accessory for rheological characterization of UV curable materials. Includes Exfo Novacure UV light source with high-pressure mercury lamp and built-in radiometer, upper tool with removable 20 mm quartz plate, lower disposable tool with 20 mm stainless steel plate (for ambient operation), light source mount and collimator, polycarbonate UV light Shield, 5 mm light guide, remote radiometer & dosimeter, Waveform & Fast Sampling interface cable for triggering light source, two pair UV safety glasses, trimming tool. Optional disposable acrylic upper and aluminum lower plates are available for rigid UV coatings. Option can be used with the ARES Peltier Plate (-30 C to 150 C) and Bath (-10 C to 140 C) temperature control systems for samples that can be removed after curing. Notes: Necessary data acquisition rates, and light source shutter and exposure time control trigger, are only available when option is used with ARES Waveform and Fast Sampling Option (part# or ). Minimum instrument requirements: Orchestrator version 7.0, ARES firmware version 8 or 15. ARES UV & Photo-Curing Accessories Upper 20 mm Quartz Plate for ARES-UV Option 340 Note: For use with ARES-UV Curing Option and Photo-curing Option upper plate fixture Lower 20 mm Stainless Steel Plate for ARES-UV Option 50 Note: For use with ARES-UV Curing and Photo-curing Option upper quartz plate and fixture Package of 10 disposable 20 mm diameter acrylic plates 310 for use with ARES-UV Curing Option and Photo-curing Option upper plate fixture. Note: Not for use with standard disposable plate fixture Package of 10 disposable 20 mm aluminum plates 310 for ARES disposable plate fixture. Note: For use with ARES-UV Curing and Photo-curing Option upper quartz plate and fixture 24 25

15 ARES DETA: Dielectric Thermal Analysis Options NOTE: Hewlett Packard #HP4284A LCR Meter is model provided with DETA options including a bridge. Customers must supply this bridge if purchasing option without bridge included ARES Dielectric Thermal Analysis Option, 34,200 Includes Bridge,120 VAC 60 Hz NOTE: Includes HP4284A LCR Meter and 25 mm Parallel Plates ARES Dielectric Thermal Analysis Tooling, 12,800 Bridge Not Included, 120 VAC, 60 Hz NOTE: Includes 25 mm Parallel Plates & Interface for customer supplied HP4284A Bridge ARES Dielectric Thermal Analysis Tooling, 12,800 Bridge Not Included, 220 VAC, 50 Hz NOTE: Includes 25 mm Parallel Plates & Interface for customer supplied HP4284A Bridge. ARES Geometries (Plates, Cones, Cups, Rotors, etc.) Stainless Steel Parallel Plates Sets for use with Force Convection Oven NOTE: Titanium Upper Tools Required fro ARES-LS1 and ARES-RFS Stainless Steel, 8 mm Parallel Plate Set; upper and lower 2, Stainless Steel, 25 mm Parallel Plate Set; upper and lower, 2,900 Includes melt ring Stainless Steel, 40 mm Parallel Plate Set; upper and lower 3, Stainless Steel, 50 mm Parallel Plate Set; upper and lower 2, Stainless Steel, Serrated 25 mm Parallel Plate Set; upper and lower 3,560 Individual Stainless Steel Parallel Plates for Force Convection Oven U Stainless Steel, 25 mm Upper Plate 1, L Stainless Steel, 25 mm Lower Plate 1, U Stainless Steel, 50 mm Upper Plate 1, L Stainless Steel, 50 mm Lower Plate 1,200 Titanium Parallel Plates for Bath, Peltier Plate & Force Convection Oven NOTE: Titanium Upper Geometries are Required for use with ARES-LS1 & ARES-RFS configured with 1KFRT Transducer mm upper parallel plate; titanium 1,940 NOTE: Can use in FCO with lower 25 mm Stainless Steel Fixture, part# l mm upper parallel plate; titanium 1,970 NOTE: Can use in FCO with lower 50 mm Stainless Steel Fixture, part# l Invar Parallel Plates/Cones for Force Convection Oven Invar, 8.0 mm Parallel Plate Set; upper and lower 3, Invar, 25 mm Parallel Plate Set; upper and lower 2, Invar, 50 mm Parallel Plate Set; upper and lower 3, Invar, 25 mm 0.1 rad Cone (5.73 deg) 1, Stainless Steel Upper Cones for Force Convection Oven NOTE: Requires Lower Plate of same diameter Stainless Steel, 25 mm 0.02 rad Cone (1.146 deg) 1, Stainless Steel, 25 mm 0.04 rad Cone (2.29 deg) 1, Stainless Steel, 25 mm 0.1 rad Cone (5.73 deg) 1, Stainless Steel, 50 mm 0.02 rad Cone (1.146 deg) 1, Stainless Steel, 50 mm 0.04 rad Cone (2.29 deg) 1,660 Titanium Upper Cones for Bath, Peltier Plate, & Force Convection Oven NOTE: Requires Lower Plate for Temperature Control System of Interest Titanium, 25 mm 0.02 rad Cone (1.146 deg) 1, Titanium, 25 mm 0.04 rad Cone (2.29 deg) 1, Titanium, 25 mm 0.1 rad Cone (5.73 deg) 1, Titanium, 50 mm 0.02 rad Cone (1.146 deg) 1, Titanium, 50 mm 0.04 rad Cone (2.29 deg) 1,970 Disposable Plate Fixtures & Accessories Stainless Steel, Disposable Plate Fixture Set; Upper and Lower 2, Titanium, Upper Disposable Plate Fixture 2,320 NOTE: Recommended for ARES-LS1 and ARES-RFS w/1kfrt Transducer Disposable Plate Sample Mold, A Six cavity stainless steel mold 3,220 for use with disposable 25 mm plates. Molds 6.35 mm thick samples and is specifically designed for molding elastomers U Stainless Steel, Upper Disposable Plate Fixture 1, L Stainless Steel, Lower Disposable Plate Fixture 1,420 Aluminum and Stainless Steel Disposable Plates Aluminum, 8 mm Disposable Parallel Plates; 10 Pair (20 pieces) Aluminum, 25 mm Disposable Parallel Plates; 10 Pair (20 pieces) Aluminum, 40 mm Disposable Parallel Plates; 10 Pair (20 pieces) Aluminum, 50 mm Disposable Parallel Plates; 10 Pair (20 pieces) Serrated Aluminum, 8 mm Disposable Parallel lates; 1 pair (2 Pieces) Serrated Aluminum, 25 mm Disposable Parallel lates; 1 pair (2 Pieces) Serrated Aluminum, 50 mm Disposable Parallel lates; 1 pair (2 Pieces) Stainless Steel, 8 mm Disposable Parallel Plates; 10 Pair (20 pieces) 1, Stainless Steel, 25 mm Disposable Parallel Plates; 10 Pair (20 pieces) 1, Stainless Steel, 40 mm Disposable Parallel Plates; 10 Pair (20 pieces) 1, Stainless Steel,50 mm Disposable Parallel Plates; 10 Pair (20 pieces) 1,260 27