Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Transcription

1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Period of validity: to Holder of certificate: Aktien-Gesellschaft der Dillinger Hüttenwerke (Société Anonyme des Forges et Aciéries de Dilling) Werkstraße 1, Dillingen Tests in the fields: mechanical-technological testing, hardness testing, metallographic testing and sour gas corrosion testing as well as manual non-destructive testing (ultrasonic testing, visual testing and magnetic particle testing) and mechanized ultrasonic testing in the steel industry Abbreviations used: see last page The testing laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use standards or equivalent testing methods listed here with different issue dates. The testing laboratory maintains a current list of all testing methods within the flexible scope of accreditation. This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/6

2 1 Mechanical-technological testing DIN EN ISO ASTM A ASTM E 8/E 8M 2015 DIN EN ISO ASTM E DIN EN ISO ASTM E ASTM E EN API RP 5L DIN EN ISO SEP ASTM E SEP Metallic materials - Tensile testing - Part 1: Method of test at room temperature Standard Test Methods and Definitions for Mechanical Testing of Steel Products Standard Test Methods for Tension Testing of Metallic Materials Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials Metallic materials - Charpy pendulum impact test - Part 1: Test method Standard Test Methods for Notched Bar Impact Testing of metallic Materials Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels Metallic materials - Drop weight tear test Drop-Weight Tear Tests on Line Pipe Metallic materials - Bend test Weld bead bend test Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels Drop-Weight Test according to W. S. Pellini Period of validity: to Translation - 2/6

3 ASTM E DIN Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature Testing of Metallic Materials - Compression Test 2 Hardness testing DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO Metallic materials - Brinell hardness test - Part 1: Test method (here: Methods HBW 2,5/187,5; HBW 5/250; HBW 5/750; HBW 10/1000; HBW 10/3000) Metallic materials - Vickers hardness test - Part 1: Test method (here: Methods HV5, HV10, HV30) Metallic materials - Rockwell hardness test - Part 1: Test method (here: Scales B and C) Metallic materials - Leeb hardness test - Part 1: Test method 3 Metallographic testing DIN EN ASTM E DIN EN ISO ASTM E ASTM E P-D Rev Micrographic examination of the non-metallic inclusion content of steels using standard pictures Standard Test Methods for Determining the Inclusion Content of Steel Steels - Micrographic determination of the apparent grain size Standard Test Methods for Determining Average Grain Size Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures Deep etching - Hot etching method for samples from slabs Period of validity: to Translation - 3/6

4 V-D Rev P-D Rev V-D Rev P-D Rev V-D Rev P-D Rev V-D Rev Testing of the solidification structure using macro etching Macro etching Image reference chart for macro etching Sulfur prints (Baumann-Method) Image reference chart for Baumann print Deep etching - Hot etching method for samples from plates Image reference chart for deep etching 4 Sour gas corrosion testing NACE Standard TM NACE Standard TM ASTM G Saudi Aramco Material Systems Specification 01-SAMSS Standard Test Method - Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking Standard Test Method - Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H 2S Environments Standard Practice for Preparation and Use of Bent-Beam Stress- Corrosion Test Specimens Qualification of Pipeline, In-Plant Piping and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking Period of validity: to Translation - 4/6

5 5 Non-destructive testing 5.1 Manual ultrasonic testing DIN EN ASTM A 578/A 578M 2012 SEP DIN EN Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method) Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications Ultrasonic immersion testing method for determining the macroscopic cleanliness rate of rolled or forged steel bars Non-destructive testing - Ultrasonic thickness measurement 5.2 Mechanical ultrasonic testing V-D Rev DIN EN Ultrasonic-testing according to EN modified for automatic and manual testing with the Dillinger Hüttenwerke equipment Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method) 5.3 Visual testing EN Non-destructive testing - Visual testing - General principles 5.4 Magnetic particle testing EN ISO Non-destructive testing - Magnetic particle testing - Part 1: General principles Period of validity: to Translation - 5/6

6 abbreviations used: API ASTM DH DIN EN ISO NACE SEP American Petroleum Institute American Society for Testing and Materials Test procedure from Aktien-Gesellschaft der Dillinger Hüttenwerke German Institute for Standardization European Standard International Organization for Standardization National Association of Corrosion Engineers, Houston, Texas, USA Iron-Steel-test sheets from the German Iron and Steel Institute Period of validity: to Translation - 6/6