QUALITY POLICY. people at all levels, by adopting policy of system driven, customer

Transcription

1 QUALITY POLICY Rise to the needs of the customers while simultaneously achieving the company s goal through Quality and Reliability by continual improvement of ISO 00 & other Industrial Valves and the Sizes : Floating ½ (DN DN0) people at all levels, by adopting policy of system driven, customer API D Pressure Range : ASME CLASS 0 ASME CLASS 200 Trunnion 2 (DN0 DN400) (EQUIVALENT DIN PRESSURE RATINGS) focused, value based & service oriented work culture. Works & Office : A/,Oshia Mata Compound, Retibundar Road, Village : Kalher, Bhiwandi, Thane (Maharashtra) INDIA. sales@vcpl.biz Web.: API A Pressure Range : 2000 PSI PSI

2 TERMS AND CONDITIONS OF SALE Acceptance : All orders based on Valvola quotations shall be subject to acceptance in writing by Valvola. Order acceptance is expressly made conditional on assent by client / customer to Valvola terms. Prices: Validity of quotation are valid for thirty days unless otherwise stated in writing and are subject to withdrawal or change at any time prior to acceptance by Valvola. If for some reason any items are changed or added to the order required, Valvola reserves the right to adjust prices accordingly. If buyers falls to meet the agreed upon and established commercial terms of the contract the seller may with hold all subsequent delivery until such time that the original commercial terms of contract have been met by the buyer. Prices do not include field or job site installation unless otherwise stated. Payment: All payment terms are to be negotiated and agreed upon Valvola and buyers / Customer. Delivery: x 00# TRN PC SE 2 x 0# TRN 2PC SE x 00# TRN PC SE All promises of delivery / shipment are estimated as closely as possible. Valvola s best efforts are used in every case to deliver or ship within promised time, but there is no guarantee to do so. Delivery of shipment specified under each item is subjected to FORCE MAJEURE. Design : Valvola reserve the right to change design material or specification without notice or without obligation to furnish or install such changes on the product previously or subsequently provided due to continual improvement. Cancellation: Order accepted by Valvola, are not subject to cancellation except with the consent of Valvola and upon terms. Cancellation of contract valve at different stages are as follows :Time of Cancellation As start engineering but prior to release for production After release for production After completion of machining component After the completion of assembly Cancellation chargers 0% 0% 0% 00% Inspections : 2 x 00# TRN 2PC Forge SE 2 x 00# TRN 2PC SE x 00# TRN PC SE Final inspection and acceptance of products must be made at factory and shall be conclusive except for latest defects. Inspection agency appointed by customer representative may inspect during normal working time prior to delivery or shipment in such manner as will not interfere with operation in factory. Governing Law : The terms & conditions of this quotations and any subsequent purchase order shall be constructed, interpreted and performed exclusively according to the law of the India, Mumbai jurisdiction. Valvola reserves the right to cancel any order for products indented by the customer to be resold or delivered to such entities. Warranty : All the products manufactured by Valvola are warranted for months from date of dispatch of goods or 2 months form the dated of commission whichever is earlier against defect in workmanship or material. Valvola does not take any responsibility if factory setting disturbed or product are dismental. This warranty does not cover deterioration by corrosion, erosion or any cause. Return of Goods : No product shall be returned to valvola without written authorization and shipping instructions having been obtained from Valvola. On all material approved for return for credit handling restocking costs. If any and cost to recondition for resale as new will be charged. Packing : Export quality good worthy packing charges will be added to the quotation. x 00# TRN 2PC SE x 0# TRN PC SE 2 x 00# TRN PC SE

3 SPARE LIST. Trunnion Mounted Ball Valve Side Or End Entry Spare Part Quantity Sr. No. Part Start Up 2 Year Operation Seat Ring Set / Valve 2 Body Gasket Set /0 Valve Set / Valve Stem Housing Gasket Set /0 Valve Set / Valve 4 Body O Ring Set /0 Valve Set / Valve Stem O Ring Set /0 Valve Set / Valve Stem Housing O Ring Set /0 Valve Set / Valve Trunnion Cover Gasket Set /0 Valve Set / Valve Trunning O Ring Set /0 Valve Set / Valve Seat O Ring Set /0 Valve Set / Valve 2. Floating Ball Valve Side Or End Entry Sr. No. Part Spare Part Quantity Start Up 2 Year Operation Seal Set / Valve 2 Body Gasket Set /0 Valve Set / Valve Packing Set /0 Valve Set / Valve About us We at Valvola Corporation Pvt. Ltd. Committed for a Quality product to meet the needs and requirements of our valuable customer s in a timely manner with competitive price and finest service in the industry. Over a decade of experience, Valvola s Valves are designed to provide valves with safety, unmatched durability and long term performance. Valvola s valves are tested under strict quality control to meet and exceed all industrial standards to which they are constructed with full tracebility with chemical, physical and pressure test records. Valvola offers standard sizes range from ½ to in diameter with pressure ratings from ASME class 0 to class 200 and API 2000 to API and equivalent DIN ratings in carbon steel, stainless steel, Duplex, Super Duplex, Inconel, Monel, AL Br, Hastalloy, low temperature material and other special material as per service requirement. Valvola s valves confirms to API D, API A, ISO 22, BS. This literature provide basic dimensions and specification of Valvola s valves. Every effort has been made for technical accuracy in development of this literature. Due to continual product design & development the design and material offered may vary. For more details visit our website: Tel.: /0 support@valvolacorporation.com/ local@valvolacorporation.com sales@valvolacorporation.com 4

4 Table of contents STANDARD TESTING AND INSPECTION DESIGN FEATURES BILL OF MATERIALS 24 GENERAL ASSEMBLY DRAWING 20 EXPLODED VIEW 224 BORE NPS DN x0 00x x2 00x x 00x x42 400x Method of Calculating Flow The Flow Coefficient Cv of a valve is the flow rate of water (gallons/minute) through a fully opened valve, with a pressure drop of PSI across the valve. To find the flow of liquid through the valve from the Cv, use the following formulas: CLASS DIMENSIONS FOR CLASS 0 2 DIMENSIONS FOR CLASS 00 2 DIMENSIONS FOR CLASS 00 2 DIMENSIONS FOR CLASS 00 2 DIMENSIONS FOR CLASS 00 2 DIMENSIONS FOR CLASS MOUNTING DETAILS CV VALUES 2 SPARE LIST 4 QUALITY POLICY TERMS & CONDITIONS OF SALE Liquid Flow QL = Cv (P/G)½ where QL = flow rate of liquid (gal./min.) P = differential pressure across the valve (psi) G = specific gravity of liquid (for water, G=) Gas Flow Qg = Cv(P2P/g)½ for noncritical flow where {(P/P) <.0} Qg = flow rate of gas (CFH at STP) P2 = outlet pressure (psi) g = specific gravity of gas (for air, g =.0)

5 CV FLOW COEFFICIENTS 2 BORE CLASS NPS DN / / / / x/2 0x x2 0x x 00x x4 0x x 200x x 20x x0 00x x2 0x x2 400x x4 400x x 40x x 00x x 00x x20 00x x24 0x Figure numbers are designed to cover essential features. A B BODY END VALVE SPECIAL TYPE BORE CLASS TRIM MATERIAL SEAT MATERIAL SEAL MATERIAL MATERIAL CONNECTION OPERATION MODIFIER () (2) () (4) () () () () () (x) One Piece Reduced Bore WCB 0 CS with ENP RF DELRIN BUNA Lever Op. X Special Side Entry Short Pattern Two Piece Side Entry Three Piece Side Entry 2 Reduced Bore Long Pattern Full Bore Short Pattern Full Bore Long Pattern A0 02 LowTemp CS ENP 2 RTJ 2 PTFE 2 *VITON B 2 Gear Op. C CF 0 F WE RPTFE *EPDM Lever Op. w/ Lock Device T Top Entry F04 04 F L 4 SW 4 NYLON 4 *AFLAS 4 Gear Op. w/ Lock Device W Welded Special Bore CFM 0 CFM NPT PEEK(HT4) *HNBR Bare Stem F 0 F04 WExRF DEVLON V Actuated CF 0 F04 L WExRTJ KEL F F04L 0 CF HUB PN 2. 0 CFM 0 CFM PN 0 L 0 % Cr PN 0 LCB Hastalloy PN 2 LF2 CL2 2 F PN 2 F Al. Bronze 20 PN 40 4 F 4 Titanium 2 PN Al. Bronze Inconel 2 22 PN 00 Titanium Special 2 PN 0 Ductile Iron 24 PN 20 Cast Inon 2 PN 20 Inconel 2 2 PN 40 Special PSI PSI PSI 0000 PSI PSI PSI Example: B X Special (ie: stem extension, overlay) () Valve Operation: Lever () Valve Seal Material: Viton B () Valve Seat Material: PTFE () Valve End Connection: RF () Valve Trim Material: F (4) Valve Body Material: A0 () Valve Pressure Rating: Class 0 (2) Valve Bore: Full Bore & Long Pattern () Valve Type: Two Piece Side Entry Notes:. Design and Construction details are subject to change without notice. 2. Other materials available upon request. See pages 2 to 4.

6 STANDARD Applicable Specification Valvola Ball Valves are designed, manufactured and tested in accordance with API, ANSI, MSS, NACE & BS requirement. The following list contains the most important Applicable standards for Ball valves. Valvola valves may be produced in accordance with other international standards upon request. API (American Petroleum Institute) API SPEC D Specification for Pipeline valves. API SPEC A Specification for wellhead and Christmas tree equipment. API SPEC FA Specification for fire test for valves. API STD Valve inspection and testing. API STD 0 Fire test for softseated quarterturn valves. API SPEC Specification for Quality programmes for the Petroleum and Natural gas industry. ASME (American Society of Mechanical Engineers) ASME B. Pipe Flanges and Flanged Fittings. ASME B.0 Face to Face and End to End Dimension of Valves. ASME B.2 Buttwelding Ends. ASME B.4 Valves Flanged, Threaded and Welding End. ASME B.4 Large Diameter Steel Flanges. ASME B.20. Pipe threads, general Purpose. ASME B. Forged Fittings, Socket Welding and Threaded. BSI (British Standards Institute) BS Specification for Steel ball Valves for the Petroleum, Petrochemical and Allied Industries. BS Testing of valves BS 4 Inspection and test of valves specification for pressure testing requirement for general purpose valves. BS 404 Circular Flanges for Pipes, Valves and Fittings. BS EN 2 Industrial Valves Shell design strength BS EN 02 Flange and their joints Circular flanges for pipes, valves, fittings and accessories, PN designated. BS EN Industrial Valves Face to Face and Centre to Face dimensions of metal valves for use in flanged pipe system. BS EN 0204 Metallic products Types of inspection documents. BS EN 4 Valves for Cryogenic Services. BS EN 22 Industrial valves Testing of valves. MOUNTING DETAILS AS PER ISO 2 Flange Type d d2 d d4 h h2 Number (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) of bolts F0 / 4 2 / 0.20 M / / 4 2 F04 2 / 4 / 0 / M / / 4 F0 2 / / M / / 4 2 F0 /2 0 2 / 2 / M / / F0 2 2 / M0 / / 4 00 Max. flange torque (NM) F2 0 / M2 / / 4,000 F4 / 4 00 / M / ,000 F /4 20 / 0 /2 0. M20 / / 0 4 4,000 F2 / 00 / M / 24,000 F0 / / M20 / / 0,000 F / 4 0 / M0 / /4 4 2,000 F40 / 4 / M / 2 / 4,000 F / M / 2 / 4 2 2,000 F0 2 / / M / 2 / ,000 VALVOLA reserve the right to change design, material or specification without prior notice, and free of obligation to furnish or install such changes on product previously sold

7 DIMENSIONS FOR CLASS 200 FULL BORE SIDE ENTRY TOP ENTRY SIZE BORE FACE TO FACE L A B A B D RF RTJ BW 2"."."."."." 4.4" 4.2" " " 2.44" 22." 2" 22." 2.".2"."." ".42" 2." 2." 2." 4.2" 2"." 22." 00 "." "." "." 2.".44" 2." " " 40.2" 40." 40.2".4" 0.".4" 2." "." 0" 0." 0".4"." 4."." " 0.4" "." " 2." ".2".4" SIDE ENTRY TRUNNION MOUNTED BALL VALVE TOP ENTRY TRUNNION MOUNTED BALL VALVE REDUCED BORE SIDE ENTRY TOP ENTRY SIZE BORE FACE TO FACE L A B A B D D RF RTJ BW "x2" 2.44"." 22." 2" 22."." 4.4" 4.2" " 0x "x".42" 2.44" 2." 2." 2." 2.".2"."." 00x0 2 0 "x4".".42" "." " 4.2" 2"." 22." 0x "x" "." 40.2" 40." 40.2"." 2.".44" 2." 200x "x"." " 0" 0." 0".4" 0.".4" 2." 20x "x0" 0.4"." "." ".4"." 4."." 00X ISO (International Organization for Standardization) ISO 00 & 200 Quality management systems Requirements. ISO 20 Industrial valves pressure testing of metallic valves. ISO 2 Industrial valves Part turn actuator attachments. ISO 42 Petroleum and Natural gas Industries pipeline transportation system Subsea pipeline Valves. MSS (Manufacturers Standardization Society) MSS SP Standard finishes for contact faces of pipe flanges and connecting End Flanges of Valves and fittings. MSS SP 2 Standard marking system for valves, fittings, flanges, and unions. MSSSP Steel casting Visual Method for Evolution of surface irregularities MSS SP 2 Ball valves with Flanged or Butt Welding Ends for General services. MSS SP 44 Steel Pipeline Flanges MSS SP 4 By pass and Drain Connection. MSS SP Pressure Testing of Steel Valves. MSS SP 2 Valve Pressure Testing Method. MSS SP 0 Ball valve Threaded, Socket welding, Solder Joint, Grooved and Flanged Ends. NACE (National Association of Corrosion Engineers) NACE MR 0 Petroleum and Natural gas industries materials for use in H2S containing environments in oil and gas production. NACE MR 00 Standard Material Requirements NACE TM 0 Standard test method VALVOLA reserve the right to change design, material or specification without prior notice, and free of obligation to furnish or install such changes on product previously sold NACE TM 024 Standard test method (HIC) 0

8 DIMENSIONS FOR CLASS 00 TESTING AND INSPECTION Description of Test Applicable Standard Extent of Test Visual and Dimensional Applicable ASTM STDS MSS SP MSS SP 44 MSS SP 2 ANSI B.4 ANSI B. ANSI B.0 API D API A 00% of rough and finished machined components and assembled valves. Stem torque API D & As per customer requirements 0% of manual valves 00% of Actuated Valves Hardness NACE MR 0 As per Valvola procedure & customer requirements Alloy Verification (PMI) As per Valvola procedure As per customer requirements Hydrostatic and Pneumatic API API D API A MISS SP and As per customer requirements Magnetic Particles Ultrasonic X and Gamma Ray ASME V ASTM E 0 ANSI B.4 ASME V ASME VIII Div ASTM A ASME V ASME VIII Div ANSI B.4 ASTM E 42, E4, E20, E44, E 00% of all Valves As per Valvola procedure & customer requirements As per Valvola procedure & customer requirements As per Valvola procedure & customer requirements Intergranular Corrosion Cracking Test ASTM A 22 & Applicable Standards As per Customer requirements Chloride Stress Corrosion Cracking ASTM G & Applicable Standards As per Customer requirements Pitting Corrosion ASTM G 4 ASTM A 2 & & Applicable Standards As per Customer requirements Micro Structural Exam ASTM E 2 & Applicable Standards As per Customer requirements Ferrite Measurement ASTM E 2 & Applicable Standards As per Customer requirements Sulphide Stress Corrosion Cracking Test NACE TM 0 As per Customer requirements Crevic Corrosion ASTM G 4 & Applicable Standards As per Customer requirements Hardness Test ASTM E, ASTM E 2 & Applicable Standards As per Customer requirements FULL BORE SIDE ENTRY TOP ENTRY SIZE BORE FACE TO FACE L A B A B D RF RTJ BW 2".2" 4." 4." 4." 4.2".4" 4.2" 0" " 2.".".2".".2"." 4.2".2" "." 2." 2." 2.".0" 2.22".0" 22.24" "." 2." 2" 2." 0.2" 2.4".0" 2." "." 2."." 2."."." 0.4"." ".4" "." " 4." 4." 2.20" 4." ".2" 44." 4." 44.".0" 44.2"." 4." " 2.4" 4." 0.2" 4." 20.4" 4.2"." 4.04" " 4." 4."." 4." 2.42" 0.".4" 4." "." 0."." 0." 2." 2." 2.2".4" "."."."." 2.".0" 22."." " 2.4" 0."." 0." 0."." 24.0" 0" SIDE ENTRY TRUNNION MOUNTED BALL VALVE TOP ENTRY TRUNNION MOUNTED BALL VALVE REDUCED BORE SIDE ENTRY TOP ENTRY SIZE BORE FACE TO FACE L A B A B D D RF RTJ BW "x2" 2.".2"."."." 4.2".4" 4.2" 0" 0x "x"." 2." 2." 2." 2.".2"." 4.2".2" 00x "x4"."." 2." 2" 2.".0" 2.22".0" 22.24" 0x "x"."." 2."." 2." 0.2" 2.4".0" 2." 200x "x".4"." "." "."." 0.4"." 20x "x0".2".4" 44." 4." 44." 4." 4." 2.20" 4." 00X "x2" 2.4".2" 4." 0.2" 4.".0" 44.2"." 4." 0x "x4" 4." 2.4" 4."." 4." 20.4" 4.2"." 4.04" 400x "x".4" 4." 0."." 0." 2.42" 0.".4" 4." 40x Note.: For more information or clarification on examination & testing, please contact our QA / QC department. VALVOLA reserve the right to change design, material or specification without prior notice, and free of obligation to furnish or install such changes on product previously sold 2

9 FULL BORE SIDE ENTRY TOP ENTRY SIZE BORE FACE TO FACE L A B A B D RF RTJ BW 2".2" 4." 4." 4." 4.".2" 4.2".2" " 2." "." ".0"."."." "." "." "." 2."."." "." 24" 24." 24"." 2."." 22" "." 2" 2." 2" 0.4" 2.4" 0.4" 2." ".2" "." " 2.40" 0.0"." 0." ".2" "." "."."."." " 2." 40." 40." 40."."."." " " 4." 44." 44." 44.".0" 40.".2" 40." "." 4" 4." 4"." 4.2".4" 4." ".4" 2" 2." 2" 2.4" 4." 2.2" 4.2" " 22.44" "." " 24.0" 4." 2." 4." " 2." " 0" " 2."." 2."." " 2.0" 4" " 4" 2.4".4" 2." 4.2" " 2.2" 0" 0." 0" 0.".44".0"." "." ".4" " 2.".".".22" "." 0" " 0".2".".2" 4." DIMENSIONS FOR CLASS 00 SIDE ENTRY TRUNNION MOUNTED BALL VALVE REDUCED BORE SIDE ENTRY TOP ENTRY SIZE BORE FACE TO FACE L A B A B D D RF RTJ BW TOP ENTRY TRUNNION MOUNTED BALL VALVE "x2" 2.".2" "." " 4.2".2" 4.2".2" 0x "x"." 2." "." "." 0.0"."." 00x "x4"."." 24" 24.'' 24"." 2."."." 0x "x"."." 2" 2." 2"." 4."." 22" 200x "x".2"." "." " 0.4"." 0.4" 2." 20x "x0".2".2" "." ".".2"." 0." 00X "x2" 2.".2" 40." 40." 40."."."."." 0x "x4" 4." 2." 44." 44." 44."."."." " 400x "x"." 4." 4" 4." 4".2" 22.04".2" 40." 40x "x".4"." 2" 2." 2".4" 24.0".4" 4." 00x "x20" 22.44".4" "." " 2.2" 2." 2.2" 4.2" 00x "x24" 2.0" 22.44" 4" " 4" 2." 2.4" 2." 4." 0x "x0"." 2.0" 0" " 0" 2.".0" 2." 4.2" 00x DESIGN FEATURES Blow Out Proof Stem One piece antiblow out stem inserted internally to withstand at all pressure in the valve. Double Seal Connection All metal to metal joints are at least double seal with O rings and gasket to assure no leakage at all pressure. This make Valvola s ball valves suitable for above ground and barried installation. Double Block & Bleed When the pressure is applied to both side of a ball simultaneously in close position the valve bore & the body cavity will be isolated from each other and the residue within the body cavity can be released through the drain plug. On the upstream and down stream side each seat shut off the line pressure or fluid independently which allow double block operation. Cavity Relief Pressure When cavity pressure is lower than the seat spring and line pressure sealing contact of ball and seat ring is maintained to achieve tight seal. When cavity pressure is higher than line pressure and seat spring, self relieving action allow seat will move away to maintain pressure balance. Antistatic Device To maintain electrical continuity between all the valve components spring assembly installed in stem & ball. VALVOLA reserve the right to change design, material or specification without prior notice, and free of obligation to furnish or install such changes on product previously sold 2

10 DIMENSIONS FOR CLASS 00 Seat Emergency Sealent Injection An emergency sealent injection system can provide the sealing integrity to sealing surface if damage occurs. Features available with & above valves, In accordance with API D. FULL BORE SIDE ENTRY TOP ENTRY SIZE BORE FACE TO FACE L A B A B D RF RTJ BW 2".2"."."." 4.".4" 4.".2" " 2." 4" 4." 4" 4.2" 4.".".44" "." ".2" ".0".2".0"." Stem Emergency Sealent Injection An emergency sealent injection system placed between O rings & gasket to prevent leakage. Features available with & above valves, In accordance with API D. "." 22" 22.2" 22".0" 22.".2" 20.4" "." 2" 2.4" 2".4" 0.".4" 24" ".2" ".4" " 2.40" 2."." 2." ".2" "." "."."."." Drain Vent Vent & Drain Vent and Drain plug provided on the body as per API D. These features shall be used to release the pressure and drain the valve. A vent may replace the bleed valve. Fire Safe Design All valves are fire safe design in accordance with API 0 and API FA requirements when soft seal materials are decomposed or deteriorated with temperature increases, metal seat comes in contact with ball to minimize the internal leakage ".4" "." "." 40.4"." 4.2" "." "." "." 42.2".0"." "." 4" 4." 4".0" 4.0" 20.0" 40.4" "." 4" 4.24" 4" 20.4" 4.44" 22.04" 44.4" " 2." "." " 24.2"." 24.2" 4.22" " 2.2" "." " 2.".4" 2."." " 2." "." 2.".0" 2."." " 0." 0" 0.2" 0" 2.4".0" 0.".4" " 2." "." " 0." 0.2" 2.0".4" " 4.4" 2" 2." 2".2" 2.20" 4.4" 4." ".42" " " ".20".".40".2" " 40." " " " 40.".0".".2" " 4." " " " 4.2"." 42.2"." SIDE ENTRY TRUNNION MOUNTED BALL VALVE REDUCED BORE SIDE ENTRY TOP ENTRY SIZE BORE FACE TO FACE L A B A B D D RF RTJ BW TOP ENTRY TRUNNION MOUNTED BALL VALVE " 2.".2" 4" 4." 4" 4.".4" 4.".2" 0x "x"." 2." ".2" " 4.2" 4.".".44" 00x "x4"."." 22" 22.2" 22".0".2".0"." 0x "x"."." 2" 2.4" 2".0" 22.".2" 20.4" 200x "x".2"." ".4" ".4" 0.".4" 24" 20x "x0".2".2" "." " 2.40" 2."." 2." 00X "x2".4".2" "." "."."."." 0x "x4".".4" ".2" "." 40.4"." 4.2" 400x "x"."." 4" 4." 4"." 42.2".0"." 40x "x"."." 4" 4.24" 4".0" 4.0" 20.0" 40.4" 00x "x20" 2."." "." " 20.4" 4.44" 22.04" 44.4" 00x "x24" 2." 2." "." " 24.2"." 24.2" 4.22" 0x "x0" 4.4" 2." 2" 2." 2" 2.".0" 2."." 00x VALVOLA reserve the right to change design, material or specification without prior notice, and free of obligation to furnish or install such changes on product previously sold 0 2

11 DIMENSIONS FOR CLASS 00 FULL BORE SIDE ENTRY TOP ENTRY SIZE BORE FACE TO FACE L A B A B D RF BW 2".2"."." 4.".4" 4.2"." " 2.".4".4" 4.".4"." 0.0" ". 2" 2".0".".4"." "."." ".2"."."." ".". 20.".2" 22." 0.4" 20" ".2" 22." 22".02" 2." 2.4" 2.42" ".2" 2." 2" 2." 2.2"." 2." ".4" 0" 0" 4."."." 0." "." " ".4" 40.4"."." "." " "." 4.".".2" "." " " 20." 4." 22.04" 40.4" " 2." 4" 4" 22" 4." 2." 44.4" " 2.2" " " 2." 0." 2.2" 4.22" " 2." " " 2." 2.".2"." 0 2" 0." 4" 0" 2.2"."." 4.2" " 2." 4" 4" 2.2".".22".4" " 4.4" " " 0." 0.4"."." ".42".2".2" 2.4"." 4."." " 40." 2.2" 2.2" 4.2"." 44.2"." " 4." 4." 4.".2" 2.24" 4.44".4" ".4"."." * * * * * * * * SIDE ENTRY TRUNNION MOUNTED BALL VALVE REDUCED BORE SIDE ENTRY TOP ENTRY SIZE BORE FACE TO FACE L A B A B D D RF BW TOP ENTRY TRUNNION MOUNTED BALL VALVE "x2" 2.".2".4".4" 4.".4" 4.2"." 0x "x"." 2." 2" 2" 4.".4"." 0.0" 00x "x4"."."." ".0".".4".4" 0x "x"."."." 20.".2"."." 2.40" 200x "x".2"." 22." 22".2" 24.2" 0.4"." 20x "x0".2".2" 2." 2".02" 2." 2.4"." 00X "x2".4".2" 0" 0" 2." 2.2".".0" 0x "x4".".4" " " 4."."." 20.0" 400x "x"."." " ".4" 40.4"." 2." 40x "x"."." " "." 4."." 2.42" 00x "x20" 2."." 4" 4" 20." 4." 22.04" 2." 00x "x24" 2.2" 2." "" "" 22." 4." 2." 2." 0x "x0" 4.4" 2." " " 2." 2.".2"." 00x Extended Bonnet When the valves are to be installed below ground or buried services or limited space available to operate valves, bonnet extension will be provided. This feature can also suitable for High temperature range, Cryogenic low temperature services. Height of extension must be specified. Pup Ends But welding ends valves may be supplied with transition pieces (PUPS) to avoid any risk of seat and seal damage during welding and post weld heat treatment operations. Pipe Schedule and length of Pups must be specified. VALVOLA reserve the right to change design, material or specification without prior notice, and free of obligation to furnish or install such changes on product previously sold 2

12 2 DESCRIPTION BODY, GLAND, SIDE CONNECTION, TRUNNION PLATE, BONNET BALL, STEM, SEAT RETAINER MATERIALS. Carbon Steel: ASTM A2WCB, ASTM A0 2. Low Temp. Carbon Steel: ASTM A2LCB, ASTM A0LF2. Stainless Steel: ASTM ACFM/CF, ASTM A2F/F04 4. Duplex Stainless Steel: ASTM A2 F, F, F, ASTM A Gr 4A, A, A. AL Bronze. Inconel. Titanium. Carbon Steel with 2, 0, micron ENP 2. ASTM A0 with 2, 0, micron ENP. Low Temp. Carbon Steel with 2, 0, micron ENP 4. ASTM A2F, ASTM ACFM. ASTM A2Fa. ASTM B4 MONEL. ASTM B4 HAST ALLOY. ASTM A2 F. ASTM A2 F 0. ASTM A2 F. AL Bronze 2. Inconel. Titanium BOLTING. ASTM AB/A42H 2. ASTM A20L/A4 Gr. 4. ASTM ABM/A42HM 4. ASTM AB/A4. ASTM ABM/A4M. ASTM A20LM/A4M TRUNNION BEARING. Carbon Steel + PTFE 2. Stainless Steel + PTFE. AL Bronze + PTFE 4. Inconel + PTFE. Duplex or Super Duplex + PTFE GASKET. SS Spiral Wound Graphite 2. SS Spiral Wound PTFE. Monel Spiral Wound PTFE 4. TEFLON. BUNA N. Solid Graphite. VITON A. AFLAS (AED). EPDM (AED) 0. Duplex or Super Duplex Spiral wound Graphite/ PTFE. SEAT INSERT. BUNA N 2. VITON B (AED). EPDM (AED) 4. PTFE. AFLAS (AED). NITRIL w/ MTBE. HNBR THRUST WASHER. PTFE 2. NYLON. AL Bronze 4. SS+PTFE. Brass SEAT SPRING. Stainless Steel,.4PH 2. Inconel X0 / X INJECTION FITTINGS. Carbon Steel 2. Stainless Steel AISI / 04. Duplex 4. Super Duplex BLEED VALVE. Carbon Steel 2. Stainless Steel AISI / 04. Duplex 4. Super Duplex KEY, PIN. Carbon Steel 2. Stainless Steel. EN GEAR OPERATOR Other materials available upon request.. Cast Iron Case, Carbon Steel Worm & Segment Gear 2. Cast Steel Case, Carbon Steel Worm & Segment Gear FULL BORE SIDE ENTRY TOP ENTRY SIZE BORE FACE TO FACE L A B A B D RF BW 2".2" ".".".0".4".4" " 2." ".4" 4.".2" 4.2".0" "." " 2".".".0" 2.4" "."." "."..4"." "." " 20.".4" 22." 0.2" 2" ".2" 2" 22" 0.4" 2." 2.20" 2." ".2" 24" 2" 2.00" 2." 4." 2." ".4" 2" 0"." 2."." 2.2" "." 0" "." 0."." 2." "." 4" ".2"." 20.0".2" "." " ".4" 40.4" 22.04"." " 2." 42" 4" 22" 4.04" 24.0" 4." " 2.2" 4" " 24.0" 4.40" 2." 2.4" " 2." " " 2."." 0."." " 0." 4" 0" 2.".4" 2.2" 4.2" " 2." " 4" 2.4" 4.2" 4.44".2" " 4.4" 0" " 2.".".".4" ".42".".".0".4"." 2.2" " 40."." 2." 2."." 4.2"." " 4." 4." 4."." 0.4" 4.2"." ".4" " " * * * * * * * * DIMENSIONS FOR CLASS 0 SIDE ENTRY TRUNNION MOUNTED BALL VALVE REDUCED BORE SIDE ENTRY TOP ENTRY SIZE BORE FACE TO FACE L A B A B D D RF BW TOP ENTRY TRUNNION MOUNTED BALL VALVE "x2" 2.".2" ".4".".0".4".4" 0x "x"." 2." " 2" 4.".2" 4.2".0" 00x "x4"."."." ".".".0" 2.4" 0x "x"."." " 20."."..4"." 200x "x".2"." 2" 22".4" 22." 0.2" 2" 20x "x0".2".2" 24" 2" 0.4" 2." 2.20" 2." 00X "x2".4".2" 2" 0" 2.00" 2." 4." 2." 0x "x4".".4" 0" "." 2."." 2.2" 400x "x"."." 4" "." 0."." 2." 40x "x"."." " ".2"." 20.0".2" 00x "x20" 2."." 42" 4".4" 40.4" 22.04"." 00x "x24" 2." 2." " " 22.4" 4.04" 24.0" 4." 0x "x0" 4.40" 2." 0" " 2."." 0.".4" 00x VALVOLA reserve the right to change design, material or specification without prior notice, and free of obligation to furnish or install such changes on product previously sold 2

13 BILL OF MATERIALS FOR CAST STEEL VALVES Exploded View for Top Entry Body Ball Seatring Retainer `O' Ring Seat Retainer Spring Retainer Holder Holder Nut Shaft Shaft Thrust Washer Gasket Top Cover Stud & Nut Packing Bearing Bush Trunnion Thrust Washer Gland Gland Allen Bolt. Body 2 Side Connection Shaft 4 Ball Trunnion Retainer 'O' Ring Seat Ring Seat Retainer Bearing Bush 0 2 Trunnion Thrust Washer Side Connection 'O' Ring Body Gasket Shaft Thrust Washer 4 Shaft 'O' Ring Gland Packing Gland Gland Allen Bolt Spring Body Stud 20 Stud Nut 2 22 Lifting Lug Valve Stand STANDARD ASTM A 2 Gr. WCB ASTM A 2 Gr. WCB AISI 40 / ASTM A2 Gr. F04 STAINLESS STEEL ASTM A Gr. CFM /CF ASTM A Gr. CFM /CF ASTM A2 Gr. F/F04, 4 PH LOW TEMPERATURE ASTM A 2 Gr. LCB Duplex ASTM A 0 Gr. 4A / A ASTM A 0 Gr. 4A / A ASTM A 2 Gr. F / F Al Bronze ASTM B 4 Gr. C00 ASTM B 4 Gr. C00 ASTM B 4 Gr. C00 / MONEL Inconel ASTM A 44 Gr. CW MC/2MW ASTM A 44 Gr. CW MC/2MW ASTM B 4 N02 ASTM A Gr. CFM / CF ASTM A Gr. CFM / CF PTFE / DEVLON / PEEK NYLON / DELRIN ASTM A Gr. CFM/CF SS04 + PTFE ASTM A Gr. CFM /CF ASTM A Gr. CFM /CF PTFE / DEVLON, PCTFE / NYLON ASTM A Gr. CFM /CF SS + PTFE ASTM A Gr. CFM /CF ASTM A Gr. CFM /CF PTFE / DEVLON / PEEK NYLON ASTM A Gr. CFM /CF SS04 + PTFE ASTM A 0 Gr. 4A / A ASTM A 0 Gr. 4A / A PTFE / DEVLON PEEK / NYLON ASTM A 0 Gr. 4A / A DUPLEX + PTFE ASTM A 44 Gr. CW MC/2MW ASTM A 44 Gr. CW MC/2MW PTFE / DEVLON PEEK / NYLON ASTM A 44 Gr. CW MC/2MW INCONEL + PTFE SS + PTFE SS04 + PTFE DUPLEX + PTFE ASTM B 4 Gr. C00/MONEL ASTM B 4 Gr. C00/MONEL PTFE / DEVLON PEEK / NYLON ASTM B 4 Gr. C00/MONEL AL. BRONZE / MONEL + PTFE AL. BRONZE / MONEL + PTFE SS04 + PTFE SPW SS 04 + GRAPHOIL/ PTFE AISI 40 / BRASS SPW SS 04/ +GRAPHOIL/PTFE AISI / 04 / BRASS FLEXIBLE GRAPHITE/ PTFE ASTM A Gr. CFM /CF ASTM A Gr. BM / B INCONEL X/0 ASTM A Gr. BM / B ASTM A4 Gr. MA / M SS /04 SS /04 SPW SS 04 + GRAPHOIL/ PTFE AISI 40 / BRASS SPW MONEL + GRAPHOIL/ PTFE BRASS SPW INCONEL+GRAPHOIL/ PTFE INCONEL 2/0/0/ BRASS PTFE FLEXIBLE GRAPHITE/ PTFE ASTM A 2 Gr. WCB ASTM A Gr. B/ BM INCONEL X/0 ASTM A Gr. B/ BM ASTM A4 Gr. 2H/2HM CARBON STEEL CARBON STEEL ASTM A 2 Gr. LCB ASTM A 0 Gr. LF2 SPW DUPLEX + GRAPHOIL/ PTFE A 2 Gr. F / F / BRASS FLEXIBLE GRAPHITE/PTFE PTFE /FLEX. GRAPHITE ASTM A 2 Gr. LCB ASTM A 0 Gr. 4A / A ASTM A 20 Gr. LM/L ASTM A BM/B INCONEL X/0 INCONEL X/0 ASTM A 20 Gr. LM/L ASTM A Gr. BM/B ASTM A4 Gr. 4L/M/4 ASTM A 4 Gr. MA/M CARBON STEEL SS CARBON STEEL SS PTFE ASTM B4 Gr. C00/MONEL ASTM A Gr. BM INCONEL X/0 ASTM A Gr. BM ASTM A 4 Gr. MA SS SS INCONEL + PTFE ASTM A 44 Gr. CW MC/2MW ASTM A Gr. BM INCONELX/0 ASTM A Gr. BM ASTM A 4 Gr. MA SS SS Other materials available upon request.

14 . STANDARD STAINLESS STEEL LOW TEMPERATURE Duplex Inconel Body ASTM A 0N ASTM A2 Gr. F / ASTM A 0 Gr. LF2 ASTM A 2 INCONEL 2//0 F04 Gr. F / F 2 Side Connection ASTM A 0N ASTM A2 Gr. F / ASTM A 0 Gr. LF2 ASTM A 2 INCONEL 2//0 F04 Gr. F / F Shaft AISI 40 / ASTM A2 ASTM A2 Gr. F / ASTM A 0 Gr. LF2 ASTM A 2 INCONEL 2//0 Gr. F04 F04/ 4 PH Gr. F / F 4 Ball ASTM A0N + ENP ASTM A2 Gr. F / ASTM A 0 Gr. LF2 ASTM A 2 INCONEL 2//0 F04 Gr. F / F Trunnion ASTM A0N + ENP ASTM A2 Gr. F ASTM A 0 Gr. LF2 ASTM A 2 INCONEL 2//0 /04 /CFM/CF Gr. F / F Retainer 'O' Ring VITON B / AED Seat Ring PTFE / DEVLON / PEEK/ PTFE/DEVLON/PCTFE/ PTFE/DEVLON/PEEK/NYLON PTFE/ PTFE/DEVLON/PEEK/NYLON NYLON NYLON DEVLON/ PEEK/NYLON Seat Retainer ASTM A0N + ENP ASTM A2 Gr. F ASTM A 0 Gr. LF2 ASTM A 2 INCONEL 2//0 /04 Gr. F / F Bearing Bush SS04 + PTFE SS + PTFE SS04 + PTFE DUPLEX + INCONEL + PTFE PTFE 0 Trunnion Thrust Washer SS04 + PTFE SS + PTFE SS04 + PTFE DUPLEX + INCONEL + PTFE PTFE Side Connection 'O' Ring VITON B / AED 2 Body Gasket SPW SS 04 + GRAPHOIL/PTFE BILL OF MATERIALS FOR FORGED STEEL VALVES SPW SS 04/ + GRAPHOIL/PTFE SPW SS 04 + GRAPHOIL/ PTFE SPW DUPLEX + GRAPHOIL/ PTFE SPW INCONEL +GRAPHOIL/PTFE Shaft Thrust Washer AISI 40//04 BRASS AISI / 04 / BRASS AISI 40 / BRASS A 2 Gr. INCONEL 2//0/ BRASS F / F / BRASS 4 Shaft 'O' Ring VITON B / AED Gland Packing FLEXIBLE GRAPHITE/PTFE FLEXIBLE GRAPHITE/PTFE FLEXIBLE GRAPHITE/PTFE PTFE /FLEX. PTFE GRAPHITE Gland ASTM A0N + ENP / AISI / 04 ASTM A 0 Gr. LF2 ASTM A 2 INCONEL 2//0 SS 04 Gr. F / F Gland Allen Bolt ASTM A Gr. B/BM ASTM A BM / B ASTM A 20 Gr. LM/L ASTM A ASTM A Gr. BM Gr. BM/B Spring INCONEL X/0 INCONEL X/0 INCONEL X/0 INCONEL INCONEL X/0 X/0 Body Stud ASTM A Gr. B/BM ASTM A Gr. BM / B ASTM A 20 Gr. LM/L ASTM A ASTMA Gr. BM Gr. BM/B 20 Stud Nut ASTM A4 Gr. 2H/2HM ASTM A4 Gr. MA / M ASTM A4 Gr. 4L/M/4 ASTM A 4 ASTMA Gr. MA Gr. MA/M 2 Lifting Lug CARBON STEEL SS /04 CARBON STEEL SS SS 22 Valve Stand CARBON STEEL SS /04 CARBON STEEL SS SS Exploded View of PC Trunnion Mounted Ball Valve.Construction may vary depending on the pressure class. support@valvolacorporation.com for more details Body 2 Side Connection Shaft 4 Ball Trunnion Retainer 'O' Ring Seat Ring Seat Retainer Bearing Bush 0 Trunnion Thrust Washer Side Conn. 'O' Ring 2 Body Gasket Shaft Thrust Washer 4 Shaft 'O' Ring Gland Packing Gland Gland Allen Bolt Spring Body Stud 20 Stud Nut 2 Valve Stand 22 Lifting Lug 4 2

15 Pc. Design Floating Ball Valve Exploded View of 2PC Trunnion Mounted Ball Valve Construction may vary depending on the pressure class. support@valvolacorporation.com for more details Body Side Connection Shaft Ball Trunnion Retainer 'O' Ring Seat Ring Seat Retainer Bearing Bush Trunnion Thrust Washer Side Conn. 'O' Ring Body Gasket Shaft Thrust Washer Shaft 'O' Ring Gland Packing Gland Gland Allen Bolt Spring Body Stud Stud Nut Body End Piece Seat Ring Ball Shaft Gasket Thrust Washer Gland Packing Gland Gland Nut Handle Handle Nut DIMENSION TABLE 0 CL. Size K 00 CL. L E L E K

16 2Pc. Design Floating Ball Valve Exploded View of Floating Ball Valve DIMENSION TABLE 0 CL. Size K 00 CL. L E K 00 CL. L E 00 CL. K 00 CL. K L E 4 Body Side Connection Seat Ring Ball Shaft Gasket Stud Nut Thrust Washer Gland Packing Gland Gland Nut Handle Handle Nut 2 0 E L E L E CL. L K K Body Side Connection Ball Shaft Seatring Gasket Stud Stud Nut Thrust Washer Gland Packing Gland Gland Nut Handle Handle Nut Lock Pin.Construction may vary depending on the pressure class. support@valvolacorporation.com for more details 2

17 TOP ENTRY BALL VALVE GENERAL ASSEMBLY Pc. Design Floating Ball Valve Body 2 Ball Seat Ring 4 Retainer 'O' Ring Seat Retainer Spring Retainer Holder Holder Nut Shaft 0 Shaft Thrust Washer Gasket 2 Top Cover Stud Nut 4 Packing Bonnet Bearing Bush Mounting Plate Trunnion Thrust Washer Gear Box 20 Gear Hex Bolt DIMENSION TABLE Size 0 CL. 00 CL. 00 CL. 00 CL. 00 CL. 200 CL. L E K L E K L E K L E K L E K L E K Body 2 Side Connection Seat Ring 4 Ball Shaft Gasket Stud Nut Thrust Washer Gland Packing 0 Gland Gland Nut 2 Handle Handle Nut

18 2 Pc. Design Trunnion Mounted Ball Valve (Casting) Pc. Design Trunnion Mounted Ball Valve (Casting) GEAR BOX GEAR BOX SEALENT INJECTION FITTING (TYP.) VENT CONN. DRAIN CONN. Body 2 Side Connection Shaft 4 Ball Trunnion Retainer 'O' Ring Seat Ring Seat Retainer Bearing Bush 0 Trunnion Thrust Washer Side Conn. 'O' Ring 2 Body Gasket Shaft Thrust Washer 4 Shaft 'O' Ring Gland Packing Gland Gland Allen Bolt Spring Body Stud 20 Stud Nut SEALENT INJECTION FITTING (TYP.) 22 VENT CONN. DRAIN CONN. Body 2 Side Connection Shaft 4 Ball Trunnion Retainer 'O' Ring Seat Ring Seat Retainer Bearing Bush 0 Trunnion Thrust Washer Side Conn. 'O' Ring 2 Body Gasket Shaft Thrust Washer 4 Shaft 'O' Ring Gland Packing Gland Gland Allen Bolt Spring Body Stud 20 Stud Nut 2 Valve Stand 22 Lifting Lug