Permahyd Hi-TEC Basecoat 480

Transcription

1 Technical Data Sheet Permahyd Hi-TEC Basecoat 480 GENERAL DESCRIPTION Permahyd Hi-TEC basecoat 480 is an innovative waterborne base coat that is fast, versatile, and simple to blend. Hi-TEC provides a one visit application with coverage in 1.5 coats. It is not necessary to flash between coats of basecoat, so processing time is minimized. All Hi-TEC color formulas VOC at spray are less than 420 g/l(3.5 lb/gal). Hi-TEC is excellent for spot, panel, or overall repairs, delivering results to satisfy the most critical repair. STORAGE Store free of frost! Permahyd Hi-TEC products should be stored at temperatures between 42 F / 5 C and 95 F / 35 C. Storing product above or below this temperature range will negatively impact product quality. Optimum Storage for maximum shelf life should be at 68 F / 20 C. Shipping guidelines are between 32 F / 0 C and 122 F / 40 C for up to 5 days in transit. The products referenced herein may not be available for sale in your market. Please consult your distributor for product availability. COMPONENTS Products Packages Shelf Life at 20 C Permahyd Hi-TEC WT311 - WT393 Mixing Colors years Permahyd Hi-TEC WT331Translucent Oxide years Permahyd Hi-TEC WT1500 Ultra Deep Black years Permahyd Hi-TEC WT364 - WT383 Pearl years Permahyd Hi-TEC WT Aluminum Metallic years Permahyd Hi-TEC WT385 System A years Permahyd Hi-TEC WT387 System B years Permahyd Hi-TEC WT Additive years Permahyd Hi-TEC WT Additive years Permahyd Hi-TEC WT Additive years Permahyd Hi-TEC 1050 Blend in Additive years Permahyd Hi-TEC 1051 Special Blend in Additive years Permahyd Hi-TEC 1053 Blend in Additive Retarder years Permahyd Hi-TEC 3080 Hardener Additive years Permahyd Hi-TEC WT394-WT399 Special Effect LUT years Permahyd Hi-TEC WT301, WT302, WT312, WT years Permahyd VE Water years Shelf life is a guide and products may be used beyond suggested shelf life Mixed colors (no WT Additive) may be stored for 6 months in the proper container MIXING COMPONENTS Permahyd Hi-TEC Basecoat 480 Permahyd Hi-TEC WT Additive 6050 Permahyd Hi-TEC WT Additive 6052 For temperatures above 80 F Permahyd Hi-TEC WT Additive 6053 For relative humidity above 50% Page 1 of 7

2 Technical Data Sheet REDUCER SELECTION GUIDE Page 2 of 7

3 Technical Data Sheet MIX RATIO Solid Colors Permahyd Hi-TEC Base Coat Permahyd Hi-TEC WT Additive 6050,6052, % Metallic / Pearl Colors Permahyd Hi-TEC Base Coat Permahyd Hi-TEC WT Additive 6050,6052, % For three-stage and two-tone colors, add 5% Permahyd Hardener 3080 to the basecoat (Use in Ground Coat only). Do not use Permahyd Hardener 3080 with WT388 Black. Hardener reduces the pot life of Permahyd Hi-TEC Base Coat 480 to minutes depending on temperature. For under hood colors, add 10% Permahyd Hardener Pot life for under hood color is 20 minutes. Refer to reducer chart for temperatures above 80 F. More reducer may be used in extreme conditions. APPLICATION VISCOSITY As mixed POT LIFE Metallic colors have a 2-4 hour pot life after of mixing with Hi-TEC WT Additive 6050, Hi-TEC WT Additive Special Reducer 6052 or Hi-TEC WT Additive High Humidity Reducer Afterwards it must be reduced again at same ratio for best metallic control. Solids and pearls have extended pot life after reduction (approximately 3-6 months). APPLICATION SUITABLE SUBSTRATES Original or old paintwork (except reversible substrates) Priomat 1K Primer Surfacer 4085 Permacron Primer/Surfacers Permahyd Primer/Surfacers Permasolid Surfacers Permahyd 1K Surfacer and Sealer SURFACE PREPARATION: Degrease and sand. Before further treatment, clean all substrates thoroughly with Permaloid Silicone Removers 7087 or 7010 Slow, Permahyd Silicone Remover 7085, Permahyd or Permahyd Silicone Remover *Permahyd Silicone Remover 7085, or Permahyd Silicone Remover 7096 must be used for final cleaning. GUN SETUP HVLP: Approved Transfer Efficiency 1.3 (1.4mm for hot, dry weather) 1.2 (1.3mm for hot, dry weather) Please refer to gun manufacturer and local legislation for proper spray pressure recommendations. APPLICATION 1 full coat 6 to 10 inches from the surface followed by 1/2 coat 10 to 14 inches from surface for metallic orientation. Keep overlap at 75% or more during entire process. Base coat must be clear coated within three days. Low opacity colors may require one or two additional coats after an appropriate flash-off time. Flash-off and drying times depend on the temperature, humidity, and air flow in the booth, and on the number of coats. The surface must in all cases be allowed to matte completely. Small areas: Surface matting can be accelerated by heat and additional air flow. It is also possible to blow with the spray gun after a waiting time of at least 5 minutes. Large areas: Surface matting can be accelerated by using infrared, or low baking. Page 3 of 7

4 Technical Data Sheet BLENDER ADDITIVE SELECTION GUIDE Page 4 of 7

5 Technical Data Sheet Preparation and application of solid and metallic colors 1. Sand Surfacer (dry with P or wet sand with P ). 2. Use a fine sanding pad, 3M (gold) for hard to reach areas, prior to preparation of blend area. Thoroughly sand surrounding area with P1000 dry, with a dual action sander and proper backing pad. It is possible to wet sand utilizing P grit. 3. Wash the entire area with Permahyd Silicone Remover 7085 or Permahyd Silicone Remover Apply 1 coat of Permahyd Blending Additive 1050 or Permahyd Blending Additive 1051 to the surrounding blend area. See chart above for blender selection. 5. Apply Permahyd Hi-TEC Base Coat 480 to completely cover the surface area, overlapping slightly onto the original finish at ready to spray viscosity. 6. After approximately 15 minutes (or when surface has completely matted) Permacron 2K Clear Coat, Permacron 2.1 Clear Coat or Permasolid HS Clear Coat may be applied. 7. Use of Hi-TEC WT Additive Special Reducer 6052 is recommended when relative humidity is below 30% and extreme conditions. 8. In very hot conditions Permahyd Hi-TEC 1053 Blend in Additive Retarder can be added at 5% of the Blend-in Additive. Alternativley 5% VE Water 6000 can be added to the Blend-in Additive in Hot and Dry conditions. Three stage pearl colors: 1. Apply Permahyd Hi-TEC Base Coat 480 (ground color) to completely cover the surfaced area, overlapping slightly onto the original finish. Allow ground coat to flash-off. 2. Apply1 ½ -2 coats of ready to spray Permahyd Hi-TEC Base Coat 480 (mid coat color) slightly overlapping this area, staggering each coat, with no flash time, so that it matches the original finish. High metallic colors (Any formula which the color components contain 50% or more of metallic, not including system component A or system component B): Mix unreduced basecoat 4 parts color to 1 part Permahyd Hi-TEC 1050 Blender. Then reduce 25% with Hi-TEC WT Additive Special Reducer 6052 or Hi-TEC WT Additive High Humidity Reducer Please see reducer chart above. Use this mixture for the entire repair. 1. Apply 1 to 1 1/2 coats of 1050, or psi. Up to 10% Hi-TEC WT Additive 6050, Hi-TEC WT Additive Special Reducer 6052 or Hi-TEC WT Additive High Humidity Reducer Please see reducer and blender charts above. 2. Apply blender to the entire panel with the exception of surfacer area. Use a 4 to 6 inch distance and fast strokes. Work from bottom of panel to top then top down. 3. Do not allow 1050 or 1051 Blender to flash. Blending The Base Coat Apply color to the blend area first, using 3 control coats at inches from the panel. Use psi and a 75% overlap throughout the entire repair. 1. Use an outside-in approach. Extend the first coat furthest, then each subsequent coat should be inside the previous coat. A motorcycle wrist action helps fade the color. 2. A diagonal blend helps produce the most undetectable repair. 3. Apply color to the surfacer (repair) area with a 1 ½ coat application. (1 full coat at 6-10 inches, followed by an orientation coat at around 12 inch distance higher humidity = further distance) 4. Keep a 75% or more overlap during the entire process. For information on spray equipment please see Technical Data Sheet No Information on cleaning of equipment and waste management can be found in Technical Data Sheet Nos and respectively Page 5 of 7

6 Technical Data Sheet DRY TIMES AIR DRYING Dust free: 20 to 30 minutes at 68 F/ 20 C FORCE DRYING 10 minutes at 140 F / 60 C metal temperature. Allow to cool minutes. INFRARED DRYING IR medium wave: IR short wave approx.: Cool down time: Approximately 4 minutes Approximately 3 minutes Approximately 5 minutes PHYSICAL PROPERTIES Coating Category: Color Coating (Solid w/ 20% WT Special Additive) Max. VOC (AP): 69 g/l; 0.6 lbs/gal Max. VOC (LE): 236 g/l; 2.0 lbs/gal Avg. Gallon Weight: 1086 g/l; 9.0 lbs/gal Avg. Weight % Volatiles: 75.3% Avg. Weight % Water 68.7% Avg. Weight % Exempt Solvent: 0.9% Avg. % Water: 74.0% Avg. % Exempt Solvent: 1.2% Coating Category: Color Coating (Effect w/ 30% WT Special Additive) Max. VOC (AP): 132 g/l; 1.1 lbs/gal Max. VOC (LE): 416 g/l; 3.5 lbs/gal Avg. Gallon Weight: 1031 g/l; 8.6 lbs/gal Avg. Weight % Volatiles: 80.1% Avg. Weight % Water 70.1% Avg. Weight % Exempt Solvent: 1.2% Avg. % Water: 72.1% Avg. % Exempt Solvent: 1.5% Coating Category: Color Coating (Multi- Stage 10% 3080/ 20% WT Additive) Max. VOC (AP): 89 g/l; 0.7 lbs/gal Max. VOC (LE): 259 g/l; 2.2 lbs/gal Avg. Gallon Weight: 1086 g/l; 9.1 lbs/gal Avg. Weight % Volatiles: 71.6% Avg. Weight % Water: 63.7% Avg. Weight % Exempt Solvent: 1.1% Avg. % Water: 68.3% Avg. % Exempt Solvent: 1.1% Coating Category: Color Coating (Multi- Stage 10% 3080/ 30% WT Additive) Max. VOC (AP): 146 g/l; 1.2 lbs/gal Max. VOC (LE): 397 g/l; 3.3 lbs/gal Avg. Gallon Weight: 1083 g/l; 8.6 lbs/gal Avg. Weight % Volatiles: 76.3% Avg. Weight % Water: 64.9% Avg. Weight % Exempt Solvent: 1.1% Avg. % Water: 67.0% Avg. % Exempt Solvent: 1.1% Page 6 of 7

7 Technical Data Sheet Coating Category: Uniform Finish Coating (Effect Blending 30% WT Additive) Max. VOC (AP): 360 g/l; 3.0 lbs/gal Max. VOC (LE): 493 g/l; 4.1 lbs/gal Avg. Gallon Weight: g/l; 8.6 lbs/gal Avg. Weight % Volatiles: 61.4% Avg. Weight % Water: 26.3% Avg. Weight % Exempt Solvent: 0.3% Avg. % Water: 26.6% Avg. % Exempt Solvent: 0.4% Theoretical Coverage: Rec. Film Build Coverage at Recommended Film Build Solids mil square feet per gallon Pearls mil square feet per gallon Metallics mil square feet per gallon VOC REGULATED AREAS These directions refer to the use of products which may be restricted or require special mixing instructions in VOC regulated areas. Follow mixing usage and recommendations in the VOC Compliant Products Chart for your area. SAFETY AND HANDLING For industrial use only by professional, trained painters. Not for sale to or use by the general public. Before using, read and follow all label and MSDS precautions. If mixed with other components, mixture will have hazards of all components. Ready to use paint materials containing isocyanates can cause irritation of the respiratory organs and hypersensitive reactions. Asthma sufferers, those with allergies and anyone with a history of respiratory complaints must not be asked to work with products containing isocyanates. Do not sand, flame cut, braze or weld dry coating without a NIOSH approved air purifying respirator with particulate filters or appropriate ventilation, and gloves. Any analytical results set forth herein do not constitute a warranty of specific product features or of the product s suitability for a specific purpose. All products are sold pursuant to our general conditions of sale. We hereby disclaim all warranties and representations, express or implied, with respect to this product, including any warranty of merchantability or fitness for a particular purpose. This product is protected by patent law, trademark law, copyright law, international treaties and/or other applicable law. All rights reserved. Unauthorized sale, manufacturing or use may result in civil and criminal penalties. Revised: Aug 2015 Page 7 of , 2015 Axalta Coating Systems, LLC and all affiliates. All rights

8 Technical Data Sheet 5450-N Permasolid Spectro Sealer 5450 National Rule GENERAL DESCRIPTION A premium low VOC, 2K high solid system that can be used as a wet-on-wet sealer, under hood color, sanding surfacer, or as a flexible sealer or surfacer for plastic repairs. Now available in black, white, red, blue, green, and yellow. All colors may be mixed together to get an unlimited number of colors including shades of gray. This easy-to-apply productive sealer/surfacer has been designed for use with both Permahyd Hi-TEC 480 and Permacron Base Coat Series 293/295. The products referenced herein may not be available for sale in your market. Please consult your distributor for product availability. MIXING COMPONENTS Permasolid Spectro Sealer 5450 PERMASOLID HS HARDENERS Permasolid HS Hardener 3307 Express, Permasolid HS Hardener 3309 Extra Fast, Permasolid HS Hardener 3310 Fast, Permasolid HS Hardener 3315 Medium, Permasolid HS Hardener 3320 Slow, or Permasolid HS Hardener 3325 Extra Slow Or PERMASOLID VHS HARDENERS Permasolid VHS Hardener 3220 Express, Permasolid VHS Hardener 3230 Medium, Permasolid VHS Hardener 3240 Slow, or Permasolid VHS Hardener 3245 Extra Slow For optimum hardener selection, refer to TDS #061 or ADDITIVES Permasolid Surfacer Additive 5408 Fast Permasolid Surfacer Additive 5409 Permasolid Surfacer Additive 5410 Slow Permasolid Elastic Additive 9050 (before hardener) For optimum reducer/additive selection, refer to TDS # MIX RATIO WET-ON-WET SEALER / UNDER HOOD COLOR SEALER / UNDER HOOD COLOR WITH HS HARDENERS / 3309 / 3310 / 3315 / 3320 / / % Page 1 of 8

9 Technical Data Sheet 5450-N ELASTIC SEALER WITH HS HARDENERS % 3307 / 3309 / 3310 / 3315 / 3320 / / % SEALER / UNDER HOOD COLOR WITH VHS HARDENERS / 3230 / 3240 / / % ELASTIC SEALER WITH VHS HARDENERS % 3220 / 3230 / 3240 / / % APPLICATION VISCOSITY As a Wet-On-Wet Sealer: seconds at 68 F/20 C, DIN 4 POT LIFE As a Wet-On-Wet Sealer: Approximately 1 hour at 68 F/20 C when ready to spray. MIX RATIO MEDIUM BUILD SANDING SURFACER SANDING SURFACER WITH HS HARDENERS / 3309 / 3310 / 3315 / 3320 / % ELASTIC SANDING SURFACER WITH HS HARDENERS % 3307 / 3309 / 3310 / 3315 / 3320 / % Page 2 of 8

10 Technical Data Sheet 5450-N Permasolid Spectro Sealer 5450 White and Black can be combined per the table below to achieve the color positions of the existing Permasolid HS Premium Surfacer 5310 Light and Dark Gray (Light Gray) Color Position 5310 (Dark Gray) Color Position Pour Size Half Half Individual weights (in grams) 5450 White, SP Black, SP 151 No Reduction 5% Reduction No Reduction 5% Reduction HS Hardeners Fast Permasolid Spectro Sealer 5450 White and Black can be combined per the table below to achieve the color position of the existing Permasolid Vario Surfacer 8590 Gray Color Position Pour Size Half Individual weights (in grams) 5450 White, SP Black, SP 151 No Reduction 5% Reduction HS Hardeners Fast SANDING SURFACER WITH VHS HARDENERS / 3230 / 3240 / % ELASTIC SANDING SURFACER WITH VHS HARDENERS % 3220 / 3230 / 3240 / % Page 3 of 8

11 Technical Data Sheet 5450-N Permasolid Spectro Sealer 5450 White and Black can be combined per the table below to achieve the color positions of the existing Permasolid HS Premium Surfacer 5310 Light and Dark Gray. Individual weights (in grams) Pour Size 5450 White, SP Black, SP 151 VHS Hardeners 5310 (Light Gray) Color Position 5310 (Dark Gray) Color Position 5% Reduction 10% Reduction 5% Reduction 10% Reduction Half Half Half Half Fast Permasolid Spectro Sealer 5450 White and Black can be combined per the table below to achieve the color position of the existing Permasolid Vario Surfacer 8590 Gray Color Position Pour Size Half Individual weights (in grams) 5450 White, SP 150 5% Reduction 10% Reduction Black, SP VHS Hardeners Fast APPLICATION VISCOSITY As a Sanding Surfacer: seconds at 68 F/20 C, DIN 4 POT LIFE As a Sanding Surfacer: Approximately 1 hour at 68 F/20 C when ready to spray. SPECIAL TIPS 1. When using ColorNet, Permasolid Spectro Sealer 5450 can be easily mixed by weight on the scale. 2. When mixing Permasolid Spectro Sealer 5450, do not substitute with additional 2K reducers or replace Permasolid Surfacer Additive 5409, Permasolid Surfacer Additive 5410 Slow, or Permasolid Surfacer Additive 5408 Fast with 2K Reducers. 3. Always reduce to recommended viscosity; additional Permasolid Surfacer Additive 5409 or Permasolid Surfacer Additive 5410 Slow may be used without impacting compliance. 4. Permasolid VHS Hardener 3220 Express should be used for best results when mixing and using Permasolid Spectro Sealer 5450 as a sanding surfacer in cool temperatures (<68 F/20 C). 5. When using VHS Hardeners, be sure the mixture is stirred very thoroughly. 6. Due to lower viscosity, lower spray pressure may be considered (24 27 PSI). 7. In order to make sanding easier, apply guide coat before sanding. 8. When air drying, a minimum temperature of 55 F/13 C must be maintained or 46 F/8 C when using Permasolid HS Hardener 3307 Express. 9. Sanded surface should be re-sanded if not top-coated within 8 hours. Page 4 of 8

12 Technical Data Sheet 5450-N 10. Over-application or lack of proper flash times will result in less than optimal performance. 11. Product must be stored above 60 F/15 C. 12. When finishing plastics please refer to VR Technical Data Sheet No When used as an under hood color, top coat is not required. APPLICATION SUBSTRATES Thoroughly degreased, non-sanded or lightly sanded E-coat Original or old paintwork (except reversible substrates, Example: lacquer). Properly prepared fiberglass with no exposed fibers. Raderal Polyester products Priomat, Permahyd, and Permasolid Primers and Surfacers SURFACE PREPARATION Degrease and sand. Prior to applying a sanding surfacer, sand body filler with P180 or finer grit sandpaper and/or sand feather edge areas with P180, then P240, and finish with P320. For wet-on-wet sealer application, finish sand with P400. Before further treatment, clean all substrates thoroughly with Permaloid Silicone Removers 7087 or 7010 Slow, Permahyd Silicone Remover 7085, or Permahyd Silicone Remover *Special Note - In order to ensure optimum corrosion protection, we recommend to coat areas of bare metal including small sand through spots with Priomat Wash Primer 4075, Priomat Primer 3255 Red Brown, or Priomat 1K Primer Surfacer SPRAYGUN SETUP Sealer Surfacer HVLP mm mm Approved Transfer Efficiency mm mm Please refer to gun manufacturer and local legislation for proper spray pressure recommendations. APPLICATION As a Wet-On-Wet Sealer: Apply a light coat followed by a medium coat without intermediate flashoff. As a Wet-On-Wet Sealer: Recoat after a minimum of 20 minutes or max. overnight flash-off before topcoat. As a Medium Build Sanding Surfacer: Apply 2-4 coats with minute intermediate flash-off between coats. RECOMMENDED FILM THICKNESS As an Under Hood Color: 1.5 coats for mil dry film thickness As a Wet-On-Wet Sealer: 1.5 coats for mil dry film thickness As a Medium Build Sanding Surfacer: 2-4 coats for mil dry film thickness DRY TIMES AIR DRYING MEDIUM BUILD SANDING SURFACER Drying time at 68 F/20 C: 3-4 hours at mil LOW BAKE Flash-off time: Drying time at 130 F/55 C metal temp.: minutes 30 minutes at mil Page 5 of 8

13 Technical Data Sheet 5450-N INFRARED DRYING Flash-off time: minutes 1. Short wave: 10 minutes at mil 2. Medium wave: 15 minutes at mil DRY SANDING Dry Sanding with random orbital sander and dust extraction Initial sanding: P320 Final sanding: P WET SANDING Initial sanding: P320 Final sanding: P RECOAT With Permacron Base Coat Series 293/295 or Permahyd Hi-TEC 480 PHYSICAL PROPERTIES Coating Category: Sealer (Wet-on-Wet Sealer / Underhood Color with HS Hardeners) Max. VOC (AP): 192 g/l; 1.6 lbs/gal Max. VOC (LE): 324 g/l; 2.7 lbs/gal Avg. Gallon Weight: g/l; lbs/gal Avg. Weight % Volatiles: 48.8 % Avg. Weight % Water: 0.0% Avg. Weight % Exempt Solvent: 35.5% Avg. % Water: 0.0% Avg. % Exempt Solvent: 39.5% Theoretical Coverage: sq. 1 mil Theoretical Recommended Film Build: sq. ft. Coating Category: Sealer (Elastic Sealer with HS Hardeners) Max. VOC (AP): 228 g/l; 1.9 lbs/gal Max. VOC (LE): 336 g/l; 2.8 lbs/gal Avg. Gallon Weight: g/l; lbs/gal Avg. Weight % Volatiles: 48.4 % Avg. Weight % Water: 0.0% Avg. Weight % Exempt Solvent: 31.5% Avg. % Water: 0.0% Avg. % Exempt Solvent: 32.2% Theoretical Coverage: sq. 1 mil Theoretical Recommended Film Build: sq. ft. Coating Category: Sealer (Wet-on-Wet Sealer / Underhood with VHS Hardeners) Max. VOC (AP): 132 g/l; 1.1 lbs/gal Max. VOC (LE): 240 g/l; 2.0 lbs/gal Avg. Gallon Weight: g/l; lbs/gal Avg. Weight % Volatiles: 47.3 % Avg. Weight % Water: 0.0% Avg. Weight % Exempt Solvent: 38.2% Avg. % Water: 0.0% Avg. % Exempt Solvent: 43.6% Theoretical Coverage: sq. 1 mil Theoretical Recommended Film Build: sq. ft. Page 6 of 8

14 Technical Data Sheet 5450-N Coating Category: Sealer (Elastic Sealer with VHS Hardeners) Max. VOC (AP): 156 g/l; 1.3 lbs/gal Max. VOC (LE): 240 g/l; 2.0 lbs/gal Avg. Gallon Weight: g/l; lbs/gal Avg. Weight % Volatiles: 45.6 % Avg. Weight % Water: 0.0% Avg. Weight % Exempt Solvent: 34.9% Avg. % Water: 0.0% Avg. % Exempt Solvent: 37.2% Theoretical Coverage: sq. 1 mil Theoretical Recommended Film Build: sq. ft. Coating Category: Primer (Sanding Surfacer with HS Hardeners) Max. VOC (AP): 216 g/l; 1.8 lbs/gal Max. VOC (LE): 324 g/l; 2.7 lbs/gal Avg. Gallon Weight: g/l; lbs/gal Avg. Weight % Volatiles: 42.2 % Avg. Weight % Water: 0.0% Avg. Weight % Exempt Solvent: 28.3% Avg. % Water: 0.0% Avg. % Exempt Solvent: 33.3% Theoretical Coverage: sq. 1 mil Theoretical Recommended Film Build: sq. ft. Coating Category: Primer (Elastic Sanding Surfacer with HS Hardeners) Max. VOC (AP): 240 g/l; 2.0 lbs/gal Max. VOC (LE): 324 g/l; 2.7 lbs/gal Avg. Gallon Weight: g/l; lbs/gal Avg. Weight % Volatiles: 40.5 % Avg. Weight % Water: 0.0% Avg. Weight % Exempt Solvent: 23.3% Avg. % Water: 0.0% Avg. % Exempt Solvent: 25.1% Theoretical Coverage: sq. 1 mil Theoretical Recommended Film Build: sq. ft. Coating Category: Primer (Sanding Surfacer with VHS Hardeners) Max. VOC (AP): 180 g/l; 1.5 lbs/gal Max. VOC (LE): 300 g/l; 2.5 lbs/gal Avg. Gallon Weight: g/l; 13.0 lbs/gal Avg. Weight % Volatiles: 43.4 % Avg. Weight % Water: 0.0% Avg. Weight % Exempt Solvent: 31.6% Avg. % Water: 0.0% Avg. % Exempt Solvent: 37.5% Theoretical Coverage: sq. 1 mil Theoretical Recommended Film Build: sq. ft. Page 7 of 8

15 Technical Data Sheet 5450-N Coating Category: Primer (Elastic Sanding Surfacer with VHS Hardeners) Max. VOC (AP): 204 g/l; 1.7 lbs/gal Max. VOC (LE): 288 g/l; 2.4 lbs/gal Avg. Gallon Weight: g/l; lbs/gal Avg. Weight % Volatiles: 41.4 % Avg. Weight % Water: 0.0% Avg. Weight % Exempt Solvent: 27.3% Avg. % Water: 0.0% Avg. % Exempt Solvent: 29.9% Theoretical Coverage: sq. 1 mil Theoretical Recommended Film Build: sq. ft. VOC REGULATED AREAS These directions refer to the use of products which may be restricted or require special mixing instructions in VOC regulated areas. Follow mixing usage and recommendations in the VOC Compliant Products Chart for your area. SAFETY AND HANDLING For industrial use only by professional, trained painters. Not for sale to or use by the general public. Before using, read and follow all label and MSDS precautions. If mixed with other components, mixture will have hazards of all components. Ready to use paint materials containing isocyanates can cause irritation of the respiratory organs and hypersensitive reactions. Asthma sufferers, those with allergies and anyone with a history of respiratory complaints must not be asked to work with products containing isocyanates. Do not sand, flame cut, braze or weld dry coating without a NIOSH approved air purifying respirator with particulate filters or appropriate ventilation, and gloves. Any analytical results set forth herein do not constitute a warranty of specific product features or of the product s suitability for a specific purpose. All products are sold pursuant to our general conditions of sale. We hereby disclaim all warranties and representations, express or implied, with respect to this product, including any warranty of merchantability or fitness for a particular purpose. This product is protected by patent law, trademark law, copyright law, international treaties and/or other applicable law. All rights reserved. Unauthorized sale, manufacturing or use may result in civil and criminal penalties. Revised: April 2016 Page 8 of , 2015, 2016 Axalta Coating Systems, LLC and all affiliates. All rights reserved.

16 Technical Data Sheet Permasolid HS Premium Surfacer 5310 GENERAL DESCRIPTION A high quality, high solids 2K acrylic surfacer for passenger car refinishing that provides very high film build with good vertical stability, efficient application due to excellent build and leveling, and sands easily. Permasolid HS Premium Surfacer 5310 is available in both light gray and dark gray. The products referenced herein may not be available for sale in your market. Please consult your distributor for product availability. MIXING COMPONENTS Permasolid HS Premium Surfacer 5310 PERMASOLID HS HARDENERS Permasolid HS Hardener 3307 Express, Permasolid HS Hardener 3309 Extra Fast, Permasolid HS Hardener 3310 Fast, Permasolid HS Hardener 3315 Medium, Permasolid HS Hardener 3320 Slow, or Permasolid HS Hardener 3325 Extra Slow Or PERMASOLID VHS HARDENERS Permasolid VHS Hardener 3220 Express, Permasolid VHS Hardener 3230 Medium, Permasolid VHS Hardener 3240 Slow, or Permasolid VHS Hardener 3245 Extra Slow For optimum hardener selection, refer to TDS # 061 or REDUCERS Permacron Dura Plus 8580, Permacron Reducer 3363 Medium, or Permacron Reducer 3365 Slow For optimum reducer selection, refer to TDS # ADDITIVES Permasolid Elastic Additive 9050 MIX RATIO SANDING SURFACER WITH HS HARDENERS / 3309 / 3310 / 3315 / 3320 / / 3363 / % Page 1 of 5

17 Technical Data Sheet ELASTIC SANDING SURFACER WITH HS HARDENERS % 3307 / 3309 / 3310 / 3315 / 3320 / / 3363 / % SANDING SURFACER WITH VHS HARDENERS / 3230 / 3240 / / 3363 / % ELASTIC SANDING SURFACER WITH VHS HARDENERS % 3220 / 3230 / 3240 / / 3363 / % VHS Hardener Mixing Chart Colors Light Gray Dark Gray Pour Size Half Half Half Half All weights in grams 10% Reduction 20% Reduction 10% Reduction 20% Reduction VHS Hardeners Reducer or Dura Plus APPLICATION VISCOSITY seconds at 68 F/20 C, DIN 4 POT LIFE Depending on hardener, approximately minutes at 68 F/20 C when ready to spray. SPECIAL TIPS 1. In order to make sanding easier, apply guide coat before sanding. 2. When air drying a minimum temperature of 55 F/13 C must be maintained or 46 F/8 C when using Permasolid HS Hardener 3307 Express. 3. Sanded surface should be re-sanded if not top-coated within 8 hours. 4. When using HS Hardeners, reducer is not required, but if desired, up to 10% may be used for lower fill, smoother finish, and faster dry. 5. When using VHS Hardeners, be sure the mixture is stirred very thoroughly. APPLICATION SUBSTRATES Thoroughly degreased, non-sanded or lightly sanded E-coat. Original or old paintwork (except reversible substrates, Example: lacquer) Properly prepared fiberglass with no exposed fibers. Raderal Polyester products Priomat Primers Page 2 of 5

18 Technical Data Sheet SURFACE PREPARATION Degrease and sand. Prior to applying a sanding surfacer, sand body filler with P180 or finer grit sandpaper and/or sand feather edge areas with P180, then P240, and finish with P320. Before further treatment, clean all substrates thoroughly with Permaloid Silicone Removers 7087 or 7010 Slow, Permahyd Silicone Remover 7085, or Permahyd Silicone Remover *Special Note - In order to ensure optimum corrosion protection, we recommend to coat areas of bare metal including small sand through spots with Priomat Wash Primer 4075, Priomat Primer 3255 Red Brown, or Priomat 1K Primer Surfacer SPRAYGUN SETUP HVLP Approved Transfer Efficiency mm mm Please refer to gun manufacturer and local legislation for proper spray pressure recommendations. APPLICATION Apply 2-4 coats with 5-10 minutes intermediate flash-off between coats. RECOMMENDED FILM THICKNESS mil dry film thickness Max mil dry film thickness - air drying Max. 8.0 mil dry film thickness - forced drying DRY TIMES AIR DRYING Drying time at 68 F/20 C: LOW BAKE Flash-off time: Drying time at 140 F/60 C metal temp.: 3 to 4 hours at mil 12 hours above 4.8 mil 5 to 15 minutes 40 minutes INFRARED DRYING Flash-off time: 5 to 15 minutes 1. Short wave: 15 minutes 2. Medium wave: 20 minutes Note: After low bake or infrared drying, allow the surfacer to cool down for 30 minutes before sanding. With less than 50% air humidity, allow for longer drying time. DRY SANDING Dry Sanding with random orbital sander and dust extraction Initial sanding: P320 Final sanding: P WET SANDING Initial sanding: P320 Final sanding: P RECOAT With Permacron Base Coat Series 293/295 or Permahyd Hi-TEC 480 Page 3 of 5

19 Technical Data Sheet PHYSICAL PROPERTIES Coating Category: Primer (Sanding Surfacer with HS Hardeners) Max. VOC (AP/LE): 515 g/l; 4.3 lbs/gal Avg. Gallon Weight: g/l; 11.3 lbs/gal Avg. Weight % Volatiles: 38.5% Avg. Weight % Water: 0.2% Avg. Weight % Exempt Solvent: 0.0% Avg. % Water: 0.2% Avg. % Exempt Solvent: 0.0% Theoretical Coverage: sq. 1 mil Theoretical Recommended Film Build: sq. ft. Coating Category: Primer (Elastic Sanding Surfacer with HS Hardeners) Max. VOC (AP/LE):467 g/l; 3.9 lbs/gal Avg. Gallon Weight: g/l; 10.5 lbs/gal Avg. Weight % Volatiles: 37.4 % Avg. Weight % Water: 0.1% Avg. Weight % Exempt Solvent: 0.0 % Avg. % Water: 0.2% Avg. % Exempt Solvent: 0.0 % Theoretical Coverage: sq. 1 mil Theoretical Recommended Film Build: sq. ft. Coating Category: Primer (Sanding Surfacer with VHS Hardeners) Max. VOC (AP/LE): 527 g/l; 4.4 lbs/gal Avg. Gallon Weight: g/l; lbs/gal Avg. Weight % Volatiles: 39.2 % Avg. Weight % Water: 0.2% Avg. Weight % Exempt Solvent: 0.0 % Avg. % Water: 0.3% Avg. % Exempt Solvent: 0.0 % Theoretical Coverage: sq. 1 mil Theoretical Recommended Film Build: sq. ft. Coating Category: Primer (Elastic Sanding Surfacer with VHS Hardeners) Max. VOC (AP/LE):431 g/l; 3.6 lbs/gal Avg. Gallon Weight: g/l; 11.2 lbs/gal Avg. Weight % Volatiles: 32.6 % Avg. Weight % Water: 0.2% Avg. Weight % Exempt Solvent: 0.0 % Avg. % Water: 0.2% Avg. % Exempt Solvent: 0.0 % Theoretical Coverage: sq. 1 mil Theoretical Recommended Film Build: sq. ft. VOC REGULATED AREAS These directions refer to the use of products which may be restricted or require special mixing instructions in VOC regulated areas. Follow mixing usage and recommendations in the VOC Compliant Products Chart for your area. Page 4 of 5

20 Technical Data Sheet SAFETY AND HANDLING For industrial use only by professional, trained painters. Not for sale to or use by the general public. Before using, read and follow all label and MSDS precautions. If mixed with other components, mixture will have hazards of all components. Ready to use paint materials containing isocyanates can cause irritation of the respiratory organs and hypersensitive reactions. Asthma sufferers, those with allergies and anyone with a history of respiratory complaints must not be asked to work with products containing isocyanates. Do not sand, flame cut, braze or weld dry coating without a NIOSH approved air purifying respirator with particulate filters or appropriate ventilation, and gloves. Any analytical results set forth herein do not constitute a warranty of specific product features or of the product s suitability for a specific purpose. All products are sold pursuant to our general conditions of sale. We hereby disclaim all warranties and representations, express or implied, with respect to this product, including any warranty of merchantability or fitness for a particular purpose. This product is protected by patent law, trademark law, copyright law, international treaties and/or other applicable law. All rights reserved. Unauthorized sale, manufacturing or use may result in civil and criminal penalties. Revised: December 2015 Page 5 of , 2015 Axalta Coating Systems, LLC and all affiliates. All rights reserved.

21 Technical Data Sheet 8094NR Permasolid Air Dry Clear Coat 8094 US National Rule GENERAL DESCRIPTION A VOC compliant, energy efficient, productive, air dry clear coat designed for single or multi panel repairs in air dry or force dry environments. This versatile clear delivers very good gloss and appearance over solvent borne and waterborne basecoats also uses the current Permasolid HS and VHS Hardener and reducer sets, enabling customers to employ a common hardener and reducer set for mixing all of their Spies Hecker 2K urethane undercoats and clear coats. The products referenced herein may not be available for sale in your market. Please consult your distributor for product availability. MIXING COMPONENTS Permasolid Air Dry Clear Coat 8094 PERMASOLID HS HARDENERS Permasolid HS Hardener 3307 Express, Permasolid HS Hardener 3309 Extra Fast, Permasolid HS Hardener 3310 Fast, Permasolid HS Hardener 3315 Medium, Permasolid HS Hardener 3320 Slow, or Permasolid HS Hardener 3325 Extra Slow Or PERMASOLID VHS HARDENERS Permasolid VHS Hardener 3220 Express, Permasolid VHS Hardener 3230 Medium, Permasolid VHS Hardener 3240 Slow, or Permasolid VHS Hardener 3245 Extra Slow For optimum hardener selection, refer to TDS #061 or REDUCERS Permacron Dura Plus 8580, Permacron Reducer 3363 Medium, Permacron Reducer 3365 Slow, or Permasolid Accelerator 9025 For optimum reducer selection, refer to TDS # ADDITIVES Permasolid Elastic Additive 9050 Page 1 of 4

22 Technical Data Sheet 8094NR MIX RATIO PERMASOLID HS HARDENERS / 3309 / 3310 / 3315 / 3320 / / 3363 / 3365 / % ELASTIC CLEAR - PERMASOLID HS HARDENERS % 3307 / 3309 / 3310 / 3315 / 3320 / / 3363 / 3365 / % PERMASOLID VHS HARDENERS / 3230 / 3240 / / 3363 / 3365 / % ELASTIC CLEAR - PERMASOLID VHS HARDENERS % 3220 / 3230 / 3240 / / 3363 / 3365 / % APPLICATION VISCOSITY Approximately 15 seconds at 68 F/20 C, DIN 4 POT LIFE Approximately 1 hour at 68 F/20 C when ready to spray. SPECIAL TIPS 1. When using Permasolid Accelerator 9025, dry for assemble time is reduced to ~1 hour at 68 F/ 20 C. 2. Using fast or express hardeners (HS: 3307, 3309, or 3310; VHS: 3220) can speed up the dry time of the Permasolid Air Dry Clear Coat 8094 significantly especially when Permasolid Accelerator 9025 is also being used. Fast or express hardeners should be used when spraying cut-ins and small parts or a single panel and/or in extreme cold conditions. 3. Medium hardeners (HS: 3315; VHS: 3230) should be used when repairing bumpers and/or 2 to 3 exterior panels. 4. Slow hardeners (HS: 3320 or 3325; VHS: 3240 or 3245) should be used when spraying large exterior panels and/or in extreme hot conditions. APPLICATION SUBSTRATES Permacron Base Coat Series 293/295 Permahyd Hi-TEC 480 Fully cured OEM or existing topcoat (non-reversible) SPRAYGUN SETUP HVLP Approved Transfer Efficiency mm mm Page 2 of 4

23 Technical Data Sheet 8094NR Please refer to gun manufacturer and local legislation for proper spray pressure recommendations. APPLICATION Apply 2 medium to full coats with no intermediate flash-off between coats. RECOMMENDED FILM THICKNESS mil dry film thickness DRY TIMES AIR DRYING Drying time at 68 F/20 C: Dust free: Dry for assembly: Dry through: LOW BAKE Flash-off time: Drying time at 110 F/43 C metal temp.: 2K Reducers: 30 minutes 9025: 20 minutes 2K Reducers: 5 to 6 hours 9025: 1 to 1.5 hours 8 hours 0-5 minutes 2K Reducers: minutes 9025: 15 minutes PHYSICAL PROPERTIES Coating Category: Clear Coating (HS Hardeners) Max. VOC (AP): 360 g/l; 3.0 lbs/gal Max. VOC (LE): 491 g/l; 4.1 lbs/gal Avg. Gallon Weight: g/l; 8.31 lbs/gal Avg. Weight % Volatiles: 61.9% Avg. Weight % Water: 0.0% Avg. Weight % Exempt Solvent: 26.2% Avg. % Water: 0.0% Avg. % Exempt Solvent: 27.2% Theoretical Coverage: sq. 1 mil Theoretical Recommended Film Build: sq. ft. Coating Category: Elastic Clear Coating (HS Hardeners) Max. VOC (AP): 360 g/l; 3.0 lbs/gal Max. VOC (LE): 491 g/l; 4.1 lbs/gal Avg. Gallon Weight: g/l; 8.32 lbs/gal Avg. Weight % Volatiles: 61.8% Avg. Weight % Water: 0.0% Avg. Weight % Exempt Solvent: 25.4% Avg. % Water: 0.0% Avg. % Exempt Solvent: 26.3% Theoretical Coverage: sq. 1 mil Theoretical Recommended Film Build: sq. ft. Coating Category: Clear Coating (VHS Hardeners) Max. VOC (AP): 348 g/l; 2.9 lbs/gal Max. VOC (LE): 479 g/l; 4.0 lbs/gal Avg. Gallon Weight: g/l; 8.28 lbs/gal Page 3 of 4

24 Technical Data Sheet 8094NR Avg. Weight % Volatiles: 61.3% Avg. Weight % Water: 0.0% Avg. Weight % Exempt Solvent: 25.8% Avg. % Water: 0.0% Avg. % Exempt Solvent: 26.7% Theoretical Coverage: sq. 1 mil Theoretical Recommended Film Build: sq. ft. Coating Category: Elastic Clear Coating (VHS Hardeners) Max. VOC (AP): 360 g/l; 3.0 lbs/gal Max. VOC (LE): 479 g/l; 4.0 lbs/gal Avg. Gallon Weight: g/l; 8.33 lbs/gal Avg. Weight % Volatiles: 60.6% Avg. Weight % Water: 0.0% Avg. Weight % Exempt Solvent: 25.2% Avg. % Water: 0.0% Avg. % Exempt Solvent: 26.2% Theoretical Coverage: sq. 1 mil Theoretical Recommended Film Build: sq. ft. VOC REGULATED AREAS These directions refer to the use of products which may be restricted or require special mixing instructions in VOC regulated areas. Follow mixing usage and recommendations in the VOC Compliant Products Chart for your area. SAFETY AND HANDLING For industrial use only by professional, trained painters. Not for sale to or use by the general public. Before using, read and follow all label and MSDS precautions. If mixed with other components, mixture will have hazards of all components. Ready to use paint materials containing isocyanates can cause irritation of the respiratory organs and hypersensitive reactions. Asthma sufferers, those with allergies and anyone with a history of respiratory complaints must not be asked to work with products containing isocyanates. Do not sand, flame cut, braze or weld dry coating without a NIOSH approved air purifying respirator with particulate filters or appropriate ventilation, and gloves. Any analytical results set forth herein do not constitute a warranty of specific product features or of the product s suitability for a specific purpose. All products are sold pursuant to our general conditions of sale. We hereby disclaim all warranties and representations, express or implied, with respect to this product, including any warranty of merchantability or fitness for a particular purpose. This product is protected by patent law, trademark law, copyright law, international treaties and/or other applicable law. All rights reserved. Unauthorized sale, manufacturing or use may result in civil and criminal penalties. Revised: October 2016 Page 4 of , 2016 Axalta Coating Systems, LLC and all affiliates. All rights reserved.