KME Plus Technical Sheets

Transcription

1 Technical Sheets [GB] KME Plus Technical Sheets

2 shiny ruby Copper alloys with the classic red-copper colour CHEMICAL COMPOSITION Cu-DHP, CuFe (and others 1 ) AVAILABLE FORMATS 2 TECHNCIAL PROPERTIES 3 soft temper hard temper (MPa) (MPa) Elongation A (%) 8 4 Hardness HV Other alloys are available on request as part of the KME Plus shiny ruby range. 2 KME Plus available product sizes and specifications are subject to manufacturing feasibility. 3 Technical data can vary depending on the alloy. Data in the table are average values referring to the main alloy. 2 Antimicrobial Copper - KME Plus Data Sheets

3 bright gold Copper alloys with golden yellow colour CHEMICAL COMPOSITION CuAIZnSnFe (and others 1 ) AVAILABLE FORMATS 2 TECHNCIAL PROPERTIES 3 (MPa) 170 (MPa) 420 Elongation A (%) > 45 Hardness HV 85 1 Other alloys are available on request as part of the KME Plus bright gold range. 2 KME Plus available product sizes and specifications are subject to manufacturing feasibility. 3 Technical data can vary depending on the alloy. Data in the table are average values referring to the main alloy. Antimicrobial Copper - KME Plus Data Sheets 3

4 cool silver CHEMICAL COMPOSITION AVAILABLE FORMATS 1 Family of grey coloured copper alloys characterized by the coolest tones of the pearl grey CuNi TECHNCIAL PROPERTIES 2 soft temper half-hard temper (MPa) > 100 > 200 (MPa) > 300 > 320 Elongation A (%) Hardness HV KME Plus available product sizes and specifications are subject to manufacturing feasibility. 2 Technical data can vary depending on the alloy. Data in the table are average values referring to the main alloy. 4 Antimicrobial Copper - KME Plus Data Sheets

5 warm silver CHEMICAL COMPOSITION AVAILABLE FORMATS 1 Family of pink-grey coloured copper alloys CuNi TECHNCIAL PROPERTIES 2 soft temper half-hard temper (MPa) > 100 > 200 (MPa) > 300 > 320 Elongation A (%) Hardness HV KME Plus available product sizes and specifications are subject to manufacturing feasibility. 2 Technical data can vary depending on the alloy. Data in the table are average values referring to the main alloy. Antimicrobial Copper - KME Plus Data Sheets 5

6 For commercial and technical information, please contact: KME Germany GmbH & Co. KG Klosterstraße OSNABRÜCK GERMANY Phone +49 (0) KME Italy S.p.A. Via Repubblica FORNACI DI BARGA (LUCCA) ITALY Phone / = registered trademark Use of products herein implies a careful assessment of its intended purpose, as well as environmental and operating conditions where product is to be put in. Such assessment is to be carried out by skilled technicians at a planning stage. KME assumes no obligation or liability in connection to any use of its products not in accordance to above recommendations. KME informs that product pictures herein are intended as examples only. KME shall not be held responsible for any possible inexactness and / or inaccuracy herein and further reserves the right to alter, modify, or amend herein contents any time. For the US market: KME Plus shiny ruby alloys, KME Plus bright gold alloys, KME Plus cool silver alloys and KME Plus warm silver alloys apply only EPA approved alloys