FAX-Request. Racks and enclosures. Rack planner. please send the following rack planners to +49(0)7161/ Rack planner overview:

Transcription

1 Racks and enclosures overview: Floor-standing rack enclosures Site» MRK Series gangable rack enclosures 2» ERK Series cost-effective rack enclosures 3» SLIM 5 Series modular low-cost rack 4 consulting service: +49(0) Portable rack» PTRK Series rugged rack for mobile applications 5 Floor-standing roll out rotating rack» WR Series service-friendly rack enclosures 6 Slide-out and rotating racks for furniture or in-wall integration» AXS Series slide-out racks 7» AX-SXR Series slide-out and rotating racks 8» SRSR Series rotating sliding rail system 9» rack shelves 10» rack storage 11» blank panels 12» thermal management 13» cable management 14 FAX-Request please send the following rack planners to +49(0)7161/ Company: Contact person: Address: Phone / Fax: Date: COMM-TEC GMBH SIEMENSSTRASSE 14 TELEFON +49(0)7161/ D UHINGEN TELEFAX +49(0)7161/

2 MRK Series MRK Series Gangable 19" rack enclosure, fully welded construction provides a kg weight capacity. The overall width is 560 mm. Incl. rear door with spring loaded latch and adjustable rack rails on front and rear. Configurable top, front door and side panels. Available in 3 heights and 3 depths: RU Useable depth Part # Pcs MRK MRK MRK MRK MRK MRK MRK-4436 Individual tops For your thermal management, will mount in the open top of the MRKs Front doors consistent with your thermal management 4x LVFD and PVFD only available in 44 RU solid MW-ST large perf vented slot pattern vented incl. 1x FAN-254 incl. 4x QFAN-119 MW-LVT MW-VT MW-10FT MW-4FT Steel, solid FD Plexiglas Steel, perf vented PFD VFD Steel, large perf vented LVFD-44 Plexiglas, vented PVFD-44 Side panels pairs, locked Steel, solid SPN for selectively vented rear door will mount in the laser knockouts (40 RU and above) Vent panel kit KO-VT3 Filter kit KO-FILTER3 additional rack rail pair, threaded Height Part #. Pcs like rack heigth MV-RR Caster base 600 kg weight capacity (-R model 320 kg) Leveling feet, cable management straps, power outlet strips Standard CBS-MRK floor frendly CBS-MRK-R 4 leveling feet LF 8x power outlet strip, 19 PDU-8

3 ERK Series ERK Series cost-effective 19 rack enclosure, the overall width is 560 mm, incl. adjustable front rack rail, providing cable pass-through and ganging holes. Ships knocked down to reduce shipping cost, 450 kg weight capacity. RU Useable depth Part. # Pcs mm ERK-1825KD mm ERK-2125KD mm ERK-3525KD mm ERK-4425KD Individual tops For your thermal management, will mount in the open top of the ERKs 3x Description Part. # Pcs solid ERK-ST vent slots ERK-VT incl. 1x FAN-254 ERK-10FT incl. 3x QFAN-119 ERK-4FT Front doors consistent with your thermal management LVFD and PVFD only available in 44 RU Description Part. # Pcs Steel, solid FD Plexiglas PFD Steel, perf vented VFD Steel, large perf vented LVFD-44 Plexiglas, vented PVFD-44 for selectively vented rear door will mount in the laser knockouts (40 RU and above) Description Part. # Pcs Vent panel KO-VT3 Filter kit KO-FILTER3 Additional rack rail pair, threaded Height Part. # Pcs like rack height ERK-RR Caster base 600 kg weight capacity (-R model 320 kg) Description Part. # Pcs Standard CBS-ERK25 floor friendy CBS-ERK25R Leveling feet, cable management straps, power outlet strips Description Part. # Pcs 4 leveling feet LF 8x power outlet strip, 1ru PDU-8

4 SLIM 5 Series SLIM 5 Series Modular low-cost 19 rack enclosure with a wide range of cabinet options makes the rack adaptable to a multitude of different installation environments. The overall width is only 485 mm. Standard front and rear rack rail with marked rack space increments. Ships knocked down to reduce shipping costs. Available in 6 heights and 2 depths: RU Useable depth Part. # Pcs Front doors Doors are capable of being installed with a right or left swing and are equipped with a cam key lock and attractive flush handle steel, vented DO-5 Plexiglas DOP-5 Side panels pairs, keylocked steel, vented SP-5 Rear access panel unique, no-hinge tip-out-lift-off design, securing key lock included steel, solid RAP Heavy duty casters will mount directly on bottom of the rack set of 4, 2 wheels lockable. Standard 5WL Floor friendly 5WLR Leveling feet, cable management straps, power outlet strips Zero Space Rackshelf SH-5A 4 leveling feet LF 8x power outlet strip, 1 RU PDU-8

5 PTRK Series PTRK Series Portable rack from rugged 3 mm thick steel, vented sides and keylocked front and rear door. Lockable 10 cm casters, threaded rack rail with numbered rack space increments. Fully assembled. RU Useable depth Part # Pcs PTRK PTRK PTRK PTRK PTRK-2726 PTRK-MDK Series Including graphite laminate top and plexi front door. Optional LCD mount available. RU Useable depth Part # Pcs PTRK-14MDK 620 PTRK-1426MDK PTRK-21MDK 620 PTRK-2126MDK PTRK-2726MDK Additional rack rail pair, threaded Height Part # Pcs like rack height PTRK-RR LCD mount mounts on the laminate top of the PTRK-MDK racks only for PTRK-MDK LD-AM1X1 Cable management straps, power outlet strips 8x power outlet strip, 1 RU PDU-8

6 WR Series WR Series The WR roll out rotating system allows easy access to the rear equipment connections and cables in larger installations. Overall width 610mm. Standard front and rear rack rail. Removable rack frame allows off-site integration of the equipment. Fully assembled. RU Useable depth Part # Pcs WR WR Individual tops For your thermal management, will mount in the open top of the WRs 4x solid MW-ST large perf vented MW-LVT vented MW-VT incl. 1x FAN-254 MW-10FT incl. 4x QFAN-119 MW-4FT Front doors Steel, solid WRFD Rear access panel keylocked Steel, solid WR-RAP Additional rack rail pair, threaded Height Part # Pcs like rack height WR-RR Cable management straps, power outlet strips 8x power outlet strip, 1RU PDU-8

7 AXS Series AXS Series Slide out rack for millwork and in-wall integration with service tracks for comfortable installation and service. Service-tracks and -stands allow a weight capacity of up to 300 kg. The optimum height can be selected in 2 RU-steps from RU. Available in 2 depths. Useable depth Part #. 510 AXS-(RU)* 660 AXS-(RU)*-26 *RU (15 43) Pcs Service tracks Pair, built-in water level for easy adjustment Track length Part #. Pcs mm TRACK50 Service stands Supports and levels service tracks Adjustable height Part #. Pcs 90 to 255 mm TS to 560 mm TS to mm TS1640 AXS-WT cable management tray Provides additional capacity for large cable bundles. Mounts between cable carriers of any AXS racks Fits Part #. Pcs all AXS racks AXS-WT Gasket and guide kit Two guides ensure the smooth sliding of the rack frame into the opening without damaging it. Set, fitting rack depth AXS-GG The brush gasket strip fills gap between rack and opening. Cable management straps, trim strips, power outlet strips Trim Strip 45 RU TA 8x power outlet strip, 1 RU PDU-8

8 AX-SXR Series AX-SXR Series Slide out and rotating rack for millwork and in-wall integration with a weight capacity of up to 205 kg. Removable rack frame for easy equipmentinstallation. The optimum height can be selected in 2 RUsteps from RU Useable depth Part # 510 AX-SXR-(RU)* *RU (15 43) Pcs Service tracks Pair, built-in water level for easy adjustment Track length Part # Pcs 790 mm TRACK31 Service stands Supports and levels service tracks Adjustable height Part # Pcs 90 to 255 mm TS to 560 mm TS to mm TS1640 Gasket and guide kit Two guides ensure the smooth sliding of the rack frame into the opening without damaging it. Set, fitting rack depth AXS-GG The brush gasket strip fills gap between rack and opening. Cable management straps, trim strips, power outlet strips Trim strip 45 RU TA 8x power outlet strip, 1 RU PDU-8

9 SRSR Series SRSR Series Rotating sliding rail system for millwork and in-wall integration with a weight capacity of up to 70 kg with 2 slides and 135 kg with 4 slides. Removable rack frame for easy equipmentinstallation. Available with a 480 mm or 580 mm useable depth and RU in 2 RU-steps. Description Part # *RU Pcs 2 slides, 70 kg capacity 480 useable depth SRSR-2-(RU)* (12 24 RU) 4 slides, 135 kg capacity, 480 useable SRSR-4-(RU)* depth (12 30 RU) 4 slides, 90 kg capacity, 580 useable SRSR-X-(RU)* depth (12 30 RU) Gasket and guide kit Two guides ensure the smooth sliding of the rack frame into the opening without damaging it. The brush gasket strip fills gap between rack and opening. Set, fitting rack depth AXS-GG Rack shelf Available with a 480 or 580 mm useable depth fitting rack depth SH-SRSR Cable management straps, trim strips, power outlet strips Trim strip 45 RU TA 8x power outlet strip, 1 RU PDU-8

10 Rack shelves Custom rackmounts The professional choice for mounting and trimming non-rackmount components. Customized faceplates guarantee a perfect fit and no gaps. Just indicate the component to be rackmounted and we will take the dimensions out of our database. If we do not have the dimensions, we will get in touch with you. Optional clamping bars for mobile or seismic applications. black anodized RSH4A silver anodized RSH4C black powder coat RSH4S Device specifications: Manufacturer: Model: clamp kit -C Adjustable heavy-duty rackshelves AS3-22 accommodates a useable depth of 565 mm while the useable depth of the VSA is adjustable. Both offer 230 kg weight capacity and mount on front- and rear-rackrail. Depth Part # Pcs mm AS mm VSA mm VSA-2744 Universal rackshelves Accommodating components with a width of up to 440 mm. Made from 1,5 mm steel with a black powder coat finish. Weight capacity, depending on model, kg. 1 HE, 280 mm tief, bis 15 kg U1 2 HE, 375 mm tief, bis 20 kg U2 3 HE, 375 mm tief, bis 30 kg U3 4 HE, 395 mm tief, bis 40 kg U4 Zero space rackshelves For SLIM 5, AXS, WR and SRSR-Racks. Useable width 470 mm. Mounts to the sides of the rack rail. Weight capacity 115 kg. Fits Part # Pcs 510 mm AXS and SLIM5 SH-5A 660 mm AXS and SLIM5 SH-5A-26 SRSR SH-SRSR WR SH-WR Vented 3 space rackshelf 450 mm useable depth, weight capacity 30 kg. 3 RU U317 Wide unit shelf system Mounts to the sides of the rack rail, fits units up to 570 mm width and 22 kg. Clamping rackshelves Adjustable, rubber-lined clamps secure a component from the top. Adjustable brackets on the back. 395 mm deep, weight capacity 50 kg. Depth Part # Pcs 290 mm WUSS mm WUSS mm WUSS mm WUSS mm WUSS20.5 Clamp height range Part # Pcs 2 RU, mm RC-2 3 RU, mm RC-3 4 RU, mm RC-4 Sliding shelves Mounts on front- and rear-rackrail. up to 22 kg, Steel SS up to 15 kg, Laminate SSL

11 Rack Storage Heavy-duty D and DC Series drawers Fully enclosed top with inside dimensions measuring 403 mm wide by 368 mm deep, the D Series drawers feature spring-loaded latches and rugged, straight-forward construction. Faceplates come with textured black powder coat, silver brushed and anodized finish or black brushed and anodized finish. black anodized 2 RU D2 black anodized 3 RU D3 black anodized 4 RU D4 silver anodized 2 RU DC2 silver anodized 3 RU DC3 silver anodized 4 RU DC4 UD Series drawers The UD Series drawers offer an economical rack storage solution. Full extension ball bearing slides smoothly extend a full 355 mm to reveal inside dimensions measuring 405 mm wide by 370 mm deep. Each model comes with a face mounted drawer pull, and a user-installed latch and keylock are optionally available. Black powder coat finish. black powder coat 2 RU UD2 black powder coat 3 RU UD3 black powder coat 4 RU UD4 Media holders for D, DC and UD fit in 4 RU drawers for 103 CDs DCDP for 40 DVDs DVDP Keylocks and latch fit all drawers user installed UD latch LATCH user installed UD keylock KYLK additional set of keys for KYLK ACC-KEY Front-loading media holders Store CDs and DVDs in our rackmount media holders. Partitioned to prevent the contents from tipping, each model features a 16-gauge flanged aluminum face and has a black brushed and anodized or silver brushed and anodized finish. 40 CDs, black, 4 RU CD 6 CDs, black, 1 RU CD-1 28 DVDs, black, 5 RU DVD 40 CDs, silver, 4 RU CCD 6 CDs, silver, 1 RU CCD-1 28 DVDs, silver, 5 RU CDVD Fixed writing/ computer keyboard shelf The FWS fixed single bay writing/computer keyboard shelf bolts quickly to any 480 mm rack to create an ideal workspace. With an attractive, black laminate top made from 20 mm furniture-grade MDF board, it occupies 2U and comes complete with special rail-mounting hardware. 460 mm deep, up to 45 kg FWS

12 Front Panels Blank panels EB Series: Inexpensive blank panel made from 1,5 mm steel. Durable black powder coat finish, flanged for extra strength. SB Series: Inexpensive blank panel made from 1,5 mm steel. Durable textured black powder coat finish, flanged for extra strength. BL Series: Blank panel made from 1,5 mm aluminium, black brushed and anodized finish, flanged for extra strength. HBL Series: Blank panel made from 3 mm aluminium. Black brushed and anodized finish. Description Part #. RU Pcs 1,5 mm Steel EB(RU 1-6) 1,5 mm Steel SB(RU 1-6) 1,5 mm Alu BL(RU 1-6) 3 mm Alu HBL(RU 1-6) Vent panels VT Vent panel Made from 1,5 mm perforated steel. 63% open area, flanged for extra strength. Black powder coat finish. VTF Vent panel The tight perforated pattern of the vent panel limits viewing for aesthetics. Made from 1,5 mm perforated steel. 22% open area, flanged for extra strength. Black powder coat finish VTP Vent panel Highly aesthetic with an attractive horizontal slotted design. Made from 1,5 mm aluminium. 20% open area, flanged for extra strength. Black brushed and anodized finish. Description Part #. RU Pcs 1,5 mm Steel, 63% VT(RU 1-4) 1,5 mm Steel, 22% VTF(RU 1-4) 1,5 mm Alu, 20% VTP(RU 1-3) Hinged plexiglass security cover Incorporating a steel frame and a keylocked 5mm thick smoked-gray plexiglass door. Easily clears controls on most equipment. Depth of 38 mm Available in 2, 3, 4 and 8 RU. Description Part #. RU Pcs security cover SECL-(RU: 2,3,4,8)

13 Thermal Management Fan panels Occupying 3 RU the fan panels provide quiet cooling for demanding environments Each assembly comes complete with fan(s) and guard(s). Available in a black brushed and anodized or black textured powder coat finish. 1 fan, 1,4 m 3 /min Alu anodized, 30 db QFP fan, 1,4 m 3 /min powder coated QTFP fans, 2,8 m 3 /min Alu anodized, 33 db QFP fans, 2,8 m 3 /min powder coated QTFP Thermostatic, ultra quite fan panel 2 RU fan panels. Digital on-board processor varies fan speed based on enclosure temperature for ultra quiet operation. All models provide local and remote notification of over temperature and fan fault to control systems. D-models provide a display for internal temperature and adjustable over temperature. Thermostatic, ultra quite design fan panel 2 RU, airflow rate 2,8 m3/min, 27 db. Elegant way with on-board processor for fan speed control. Local and remote notification of over temperature and fan fault to control systems. Available in black or silver brushed and anodized finish Panels without fans Fan panels accommodate 119-mm-fans. Alu, black brushed and anodized, 3 RU 4 fans, 27 db 2,8 m 3 /min without display iuqfp-4 4 fans, 27 db 2,8 m 3 /min with display iuqfp-4d 2 fans, 24 db 1,4 m 3 /min without display iuqfp-2 2 fans, 24 db 1,4 m 3 /min with display iuqfp-2d 4 fans 2,8 m 3 /min black iuqfp-4dra 4 fans 2,8 m 3 /min silver iuqfp-4drc fits 1x 119 mm fan FP1 fits 2x 119 mm fans FP2 fits 3x 119 mm fans FP3 Filter kit 3 RU front plate with washable filter. For use as a filtered vent panel or a filtered air intake. Filter panel 3 RU FILTER Fans Ball-bearing 230 V-fans, available in 119 and 254 mm. The quiet fans of the QFAN series includes fan guards with a black powder coat finish. The AXS-Fan feature a slim design for mounting in AXS series racks. Hardware included. 119 mm, 2,7 m 3 /min FAN mm, 1,4 m 3 /min QFAN mm, 1,6 m 3 /min AXS-FAN 254 mm, 2,7 m 3 /min FAN-254 fan guard 119 mm Guard fan guard 254 mm Guard-254

14 Cable Management Vertical lacer strips The steel lacer strips mount vertically to the rack rail brackets and provide ample holes for cable ties. Lacer strips can easily be cut down to smaller sizes. Available in 44 RU. pre-pack qty 6 pcs. Description Part # Qty Packs 50 mm width LACE-P 6 90 mm width, lances for cable fasteners LACE-44LP 6 25 mm width, tapped for tie saddles LACE-44-1P 6 LACE-P LACE-44LP, L LACE-44-1P LACE-44-1SP 25 mm width, with pre-installed tie saddles LACE-44-1SP 6 Horizontal lacer bars LBP-1R and LBP-1.5 Round lacer bars (LBP-1R) for lacing small horizontal cable runs. LBP-1.5 features a 40 mm offset. LBP-1A, LBP-2A, LBP-4A and LBP-6A "L" shaped lacer bars for lacing cables vertically or horizontally. Recommended for larger runs of cable. The LBP-2A, LBP-4A and LBP-6A have a 50, 100 and 150 mm offset. LBP-LTF Horizontal lacer panel, 2 rack spaces high, features a large flange, numerous cable tie points and more surface for mounting. pre-pack qty 10 pcs. Description Part # Qty Packs Round lacer bar LBP-1R 10 Round lacer bar 40 mm Offset LBP "L" shaped lacer bar LBP-1A 10 "L" shaped lacer bar 50 mm Offset LBP-2A 10 "L" shaped lacer bar 100 mm Offset LBP-4A 10 "L" shaped lacer bar 150 mm Offset LBP-6A 10 Horizontal lacer panel, 2 RU LBP-LTF 10 Cable management straps Fasten cable bundles securely while maintaining the integrity of the cable. The reusable cable management straps are made from Velcro and are perfect for managing cables that are sensitive to strain. The straps are 200 mm long. pre-pack qty 12 pcs. Description Part # Qty 12 cable straps TW12 Brush grommet panel 1 HE BR1 Brush grommet panel 2 HE BR2 Protective grommet, 9 m GR-30 4 grommets GK4 Brush grommet panel Provides a clean and organized cable entry method. Features a built-in cable management tray. 2 RU brush grommet fits in opening on all MW series top options. Protective grommet Protects cable from sharp edges of openings and knockouts. Black, 9 m Grommets Grommet protect cables and fits enclosure knockouts of ERK and WR. Can be used on any 100mm electrical knockout. Allows ganging without using expensive electrical fittings. pre-pack qty 4 pcs.