Product of our comprehensive range of valves for the energy & process industries

Size: px

Start display at page:

Download "Product of our comprehensive range of valves for the energy & process industries"

Alvin Harrington
5 years ago
Views:

1 Union Flow Control System Group(UFCS) has established industry leadership in the design and manufacture of its products. When properly selected, this UFCS product is designed to perform its intended function safely during its useful life. However, the purchaser or user of UFCS products should be aware that UFCS products might be used in numerous applications under a wide variety of industrial service conditions. Although UFCS can (and often does) provide general guidelines, it cannot provide specific data and warnings for all possible applications. The purchaser/user must therefore assume the ultimate responsibility for the proper sizing and selection, installation, operation and maintenance of UFCS products. The purchaser/user should read and understand the Installation, Operation & Maintenance (IOM) instructions included with the product, and train its employees and contractors in the safe use of UFCS products in connection with the specific application. While the information and specifications presented in this literature are believed to be accurate, they are supplied for informative purposes only and should not be considered certified or as a guarantee of satisfactory results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any matter with respect to this product. Because UFCS is continually improving and upgrading its product design, the specifications, dimensions and information contained herein are subject to change without notice. Should any question arise concerning these provisions, the purchaser/user should contact UFCS at any of its worldwide operations or offices. All trademarks and trade names shown in this literature are property of their respective owners. For more information, contact: For more information about Union Flow Control System Group and its products, contact or call Korea ( ) Manufacturing Facilities Product of our comprehensive range of valves for the energy & process industries Specification Data : CON-TOT-VO1(111111)

U N I C O N s y s t e m s QUALITY & ENVIRONMENTAL POLICY Construct quality and environmental management system by ISO 9001, PED standard and prove reliability of product through continuous

4 U N I C O N s y s t e m s QUALITY & ENVIRONMENTAL POLICY Construct quality and environmental management system by ISO 9001, PED standard and prove reliability of product through continuous environment improvement and pollution control, quality improvement. Guarantee company s legal position through observance of quality and environmental regulation. Forecast non-conformance that happen in all fields of our company and do preventive action. Do to establish detailed target and review enforcement situation regularly and strengthen quality and environmental management system. Do all efforts about customer complaint and correspond quickly. Use energy and resources efficiently and control occurrence of environmental pollutant and try actively in recycling of available waste. Exchange necessary information through communication system, and verify reliability quality and environment management activity.

5 contents 6 V100 series 8 V200 series 10 V400 series 11 D400 series 12 V300 series 13 V500 series 14 V600 series 15 V800 series 16 A100/200 series 17 A300/400 series Product Advantage Control Valve Service UNICON Valve has provided world wide class automated process control solutions for over thirty years, such as the highly-reliable UNICON V100/200 series Top/Cage- Guided Globe valve.

6 Shut-off Valve Service UNICON Valve has provided world wide class automated process shut-off solutions for over thirty years, such as the highly-reliable UNICON V600/800 series HP Ball & Butterfly Valve. Desuperheater Station Service UNICON Valve has provided world wide class boiler equipment automation process control solutions for over thirty years, such as the highly-reliable UNICON V400/D400 series HP/LP By-pass Desuperheater Station, high performance nozzle spray Valve.

General Service Globe Control Valves V100 series The V100 series single-ported, heavy top-guided control valves are designed with built-in

This includes optional trim designs for anti-cavitation and noise reduction.

Standard : ANSI Class IV Option : ANSI Class V ANSI Class VI (Soft) Cv Range 0.1 to 860 Press.

Range End Connections Actuators Applications -150 o F to +1,050 o F -100 o C to +565 o C Option : -320 o F to +1,562 o F -196 o C to +850 o C

7 General Service Globe Control Valves V100 series The V100 series single-ported, heavy top-guided control valves are designed with built-in versatility for handling a wide variety of power process applications. This includes optional trim designs for anti-cavitation and noise reduction. Straight way & Angle body Single Seated style 1/2" to 8"(DN15 DN200) Rating ANSI 150Lb to 600Lb JIS 10K to 63K PN10 to PN64 Leakage FCI 70-2 Standard : ANSI Class IV Option : ANSI Class V ANSI Class VI (Soft) Cv Range 0.1 to 860 Press. Range up to 1,480 psi(g) up to 104 kgf/cm 2 Temp. Range End Connections Actuators Applications -150 o F to +1,050 o F -100 o C to +565 o C Option : -320 o F to +1,562 o F -196 o C to +850 o C Carbon steel(wcb,wcc), Stainless steel(cf8,cf8m,cf3,cf3m) Chrome-moly(WC6,WC9,C12A) other alloys NPT(BSPP) RF/FF/RTJ Flanged, Socket weld, Butt weld Spring-diaphragm, Cylinder, Motorized, Electro-Hydraulic Low Pressure Steam & Water, General Services, Flash Tank, Fuel Gas, Condensate Recirculation, Superheater and Reheat Spray, Desuperheater Water Spray, Gland Steam Pressure, Soot Blower, Steam Pressure, Auxiliary Steam 6

Heavy Top-Guiding Larger post guide area vs.

Bellows seal design Extension bonnet Low emission packing Various Trim Options Single and double-stage low noise and anti-cavitation trim Hardened trim standard Quick change or

style 1/2" to 8"(DN15 DN200) Cv Range Multi-step : 0.1 to 3.2 Multi Hole 1-Stage : 5.2 to 600 Multi Hole 2-Stage : 5.2 to 540 Multi Hole Multi-Stage : 5.2 to 500 Disk-Stack : 4.

8 Heavy Top-Guiding Larger post guide area vs. other globe valve designs Located away from flow stream Provides better stability and control Design Flexibility Multiple end connections Various materials Angle body configuration Bellows seal design Extension bonnet Low emission packing Various Trim Options Single and double-stage low noise and anti-cavitation trim Hardened trim standard Quick change or threaded seat rings Reduced capacities and micro flow trim Equal percentage and linear contours Stellite Venturi Seat Soft seat design Othres Specification Straight way & Angle body style 1/2" to 8"(DN15 DN200) Cv Range Multi-step : 0.1 to 3.2 Multi Hole 1-Stage : 5.2 to 600 Multi Hole 2-Stage : 5.2 to 540 Multi Hole Multi-Stage : 5.2 to 500 Disk-Stack : 4.0 to 430 Press. Range up to 1,480 psi(g) up to 104kgf/cm 2 Temp. Range -150 o F to +1,050 o F -100 o C to +565 o C Option : -320 o F to +1,562 o F -196 o C to +850 o C Applications Higher Noise Handing Equipment System Heavy Cavitation Handing Equipment System Product of our comprehensive range of valves for the energy & process industries 7

Severe Service Globe Control Valves V200 series The V200 series cage-guided control valves are designed for high performance and to exceed the limits of other

With numerous trim configurations (including Low-noise and Anti-cavitation)and its ability to handle large pressure drops, the V200Series can be applied in a

Straight way & Angle body Cage Guided style Rating 1-1/2" to 24"(DN40 DN600) ANSI 150Lb to 2500Lb JIS 10K to 63K PN10 to PN450 Leakage FCI 70-2 Standard : ANSI

Range End Connections Actuators Applications -150 o F to +1,050 o F / -100 o C to +565 o C Option : -320 o F to +1,562 o F / -196 o C to +850 o C Carbon

9 Severe Service Globe Control Valves V200 series The V200 series cage-guided control valves are designed for high performance and to exceed the limits of other conventional valves. With numerous trim configurations (including Low-noise and Anti-cavitation)and its ability to handle large pressure drops, the V200Series can be applied in a variety of severe services. Straight way & Angle body Cage Guided style Rating 1-1/2" to 24"(DN40 DN600) ANSI 150Lb to 2500Lb JIS 10K to 63K PN10 to PN450 Leakage FCI 70-2 Standard : ANSI Class IV Option : ANSI Class V Cv Range 12 to 4,560 Press. Range up to 6,170 psi(g) up to 434kgf/cm 2 Temp. Range End Connections Actuators Applications -150 o F to +1,050 o F / -100 o C to +565 o C Option : -320 o F to +1,562 o F / -196 o C to +850 o C Carbon steel(wcb,wcc), Stainless steel(cf8,cf8m,cf3,cf3m) Chrome-moly(WC6,WC9,C12A), other alloys NPT(BSFF), RF/FF/RTJ Flanged, Socket weld, Butt weld Spring-diaphragm, Cylinder, Motorized, Electro-Hydraulic Low Pressure Steam & Water, General Services, Flash Tank, Fuel Gas, Condensate Recirculation, Superheater and Reheat Spray, Desuperheater Water Spray, Gland Steam Pressure, Soot Blower, Steam Pressure, Auxiliary Steam, Boiler Feedwater, Deaerator Pegging Steam, Deaerator Level Control, Turbinebypass(HP/LP) 8

P-Port Cage Design Window Cage Design Heavy Cage-Guiding Larger post guide area vs.

design Extension bonnet Low emission packing Multi Hole Stage Design Various Trim Options Designed to handle high pressure drops in severe service applications for incompressible fluids.

Tighter shutoff capability at high operating temperatures is achievable using a spring-loaded internal auxiliary plug construction.

10 P-Port Cage Design Window Cage Design Heavy Cage-Guiding Larger post guide area vs. other globe valve designs Located away from flow stream Provides better stability and control Design Flexibility Multiple end connections Various materials Angle body configuration Bellows seal design Extension bonnet Low emission packing Multi Hole Stage Design Various Trim Options Designed to handle high pressure drops in severe service applications for incompressible fluids. Complete cavitation protection is available for pressure drops up to 3000 psi. Tighter shutoff capability at high operating temperatures is achievable using a spring-loaded internal auxiliary plug construction. An optional downstream diffuser is also available for additional noise reduction. Designed for noise control on gas or steam at high pressure drop ratios. Also available for anti-cavitationon high pressure liquid applications. Othres Specification Straight way & Angle body style 1-1/2" to 24"(DN40 DN600) Cv Range Multi Hole 1-Stage : 5.2 to 600 Multi Hole 2-Stage : 5.2 to 540 Multi Hole Multi-Stage : 5.2 to 500 Disk-Stack : 4.0 to 430 Press. Range up to 1,480 psi(g) up to 104kgf/cm 2 Temp. Range -150 o F to +1,050 o F -100 o C to +565 o C Option : -320 o F to +1,562 o F -196 o C to +850 o C Applications Higher Noise Handing Equipment System Heavy Clavitation Handing Equipment System Product of our comprehensive range of valves for the energy & process industries 9

Pressure Reducing Desuperheater Station V400 series Employing patented fluid flow conditioning

easily meet today s most challenging steam conditioning applications.

to 63K PN10 to PN450 Leakage FCI 70-2 Standard : ANSI Class IV Option : ANSI Class V Cv Range 70 to

Range End Connections Actuators Applications upto +1,050 o F upto +565 o C Carbon steel(wcb,wcc),

11 Pressure Reducing Desuperheater Station V400 series Employing patented fluid flow conditioning technology and a unique nozzle arrangement, UNICON s new and improved desuperheater station products easily meet today s most challenging steam conditioning applications. Straight way & Angle body Cage Guided style Rating 3" to 24"(DN80 DN600) ANSI 150Lb to 2500Lb JIS 10K to 63K PN10 to PN450 Leakage FCI 70-2 Standard : ANSI Class IV Option : ANSI Class V Cv Range 70 to 4,560 Press. Range up to 6,170 psi(g) up to 434kgf/cm 2 Temp. Range End Connections Actuators Applications upto +1,050 o F upto +565 o C Carbon steel(wcb,wcc), Stainless steel(cf8,cf8m,cf3,cf3m) Chrome-moly(WC6,WC9,C12A) other alloys RF/FF/RTJ Flanged, Butt weld Spring-diaphragm, Cylinder, Motorized, Electro-Hydraulic Auxiliary Steam Turbinebypass(HP/LP) 10

+ 10 l Accuracy(5) ± 5 ± 10 ± 5 Mounting Any Verical-up Vertical w/flow Orientation preferred upward ANSI Pressure Class Max. 600Lbs Max. 2500Lbs Max. 2500Lbs Main Header 1" ~ 16" 6" ~ 24" 2" ~ Ste.

12 Nozzle Spray Desuperheater Station D400 series Straight way & Angle body Cage Guided style Model No. D410 D420 D440 Turndown Ratio 15 : 1 Up to 40 : 1 Up to 100 : 1 Type of Atomizing Velocity Mechanical Velocity Minimum Outlet Temperature Temperature Contro Sat Sat Sat l Accuracy(5) ± 5 ± 10 ± 5 Mounting Any Verical-up Vertical w/flow Orientation preferred upward ANSI Pressure Class Max. 600Lbs Max. 2500Lbs Max. 2500Lbs Main Header 1" ~ 16" 6" ~ 24" 2" ~ Ste.End Connections Flanged Flanged Flanged or Welding or Welding or Welding Velocity Limits 9m/sec~ 50~254m/sec ~ 152m/sec Pressure Drop 3 psi nominal Negligible 3 ~ 5 psi nominal Required Coolant Pressure Steam 48 ~ 172 kpa 400kPa ~ 34 ~ 670 kpa Line Pressure (7 ~ 25 psi) (60 psi ~ ) (5 ~ 100 psi) Distance to Temperature 6 ~ 10 m 4.9 ~ 9.1 m 3.7 ~ 6 m Sensor (DTS) Min. Straight Pipe 6 pipe diameters 5 pipe diameters Long radius Distance (Upstream) (not less (not less elbows may than 0.3m) than 1.2m) be installed at Downstream 50% of "DTS" 70% of "DTS" inlet and outlet Product of our comprehensive range of valves for the energy & process industries 11

Three Way Globe Control Valves V300 series The V300 Series is a three-way control valve designed for either combining or diverting applications.

They are unbalanced valves and primarily used for proportional blending (mixing) of two flows. When flowed in reverse they can be used for flow splitting duties.

13 Three Way Globe Control Valves V300 series The V300 Series is a three-way control valve designed for either combining or diverting applications. It is well suited for applications requiring high capacities with low pressure recovery. The three way control valves are designed around the series V300 body construction. They are unbalanced valves and primarily used for proportional blending (mixing) of two flows. When flowed in reverse they can be used for flow splitting duties. Mixing & Diverting Globe style Rating 1" to 12"(DN25 DN300) ANSI 150Lb to 600Lb JIS 10K to 40K PN10 to PN63 Leakage FCI 70-2 Standard : ANSI Class IV Option : ANSI Class V Cv Range 12 to 1,900 Press. Range up to 1,480 psi(g) up to 104kgf/cm 2 Temp. Range End Connections Actuators Applications -150 o F to +1,050 o F -100 o C to +565 o C Option : -320 o F to +1,562 o F / -196 o C to +850 o C Carbon steel(wcb,wcc), Stainless steel(cf8,cf8m,cf3,cf3m) Chrome-moly(WC6,WC9,C12A) Other alloys RF/FF/RTJ Flanged, Butt weld Spring-diaphragm, Cylinder, Motorized, Electro-Hydraulic Heat exchangers 12

Double Block Globe Control Valves V500 series The V500 Series double block globe control valve is flow conditioning technology and a unique plug arrangement, UNICON s new and improved double design

Straight way & Angle body Cage Guided style Rating 1" to 6"(DN25 DN150) ANSI 150Lb to 2500Lb JIS 10K to 63K PN10 to PN450 Leakage FCI 70-2 Standard : ANSI Class IV Option : ANSI Class V Cv Range 12

Range End Connections Actuators Applications -150 o F to +1,050 o F -100 o C to +565 o C Option : -320 o F to +1,562 o F / -196 o C to +850 o C Carbon steel(wcb,wcc), Stainless

14 Double Block Globe Control Valves V500 series The V500 Series double block globe control valve is flow conditioning technology and a unique plug arrangement, UNICON s new and improved double design products easily meet today s most challenging special control process applications. Straight way & Angle body Cage Guided style Rating 1" to 6"(DN25 DN150) ANSI 150Lb to 2500Lb JIS 10K to 63K PN10 to PN450 Leakage FCI 70-2 Standard : ANSI Class IV Option : ANSI Class V Cv Range 12 to 430 Press. Range up to 6,170 psi(g) / up to 434 kgf/cm 2 Temp. Range End Connections Actuators Applications -150 o F to +1,050 o F -100 o C to +565 o C Option : -320 o F to +1,562 o F / -196 o C to +850 o C Carbon steel(wcb,wcc), Stainless steel(cf8,cf8m,cf3,cf3m) Chrome-moly(WC6,WC9,C12A), other alloys NPT(BSFF), RF/FF/RTJ Flanged, Socket weld, Butt weld Spring-diaphragm, Cylinder, Motorized, Electro-Hydraulic Low Pressure Steam & Water, General Services, Flash Tank, Fuel Gas, Condensate Recirculation, Superheater and Reheat Spray, Desuperheater Water Spray, Gland Steam Pressure, Soot Blower, Steam Pressure, Auxiliary Steam Product of our comprehensive range of valves for the energy & process industries 13

High Performance Butterfly Valves V600 series The V600 series triple-offset butterfly valve high-performance in a rotary valve package.

Triple Offset Butterfly Style Rating 3" to 36"(DN80 DN900) ANSI 150Lb to 2500Lb JIS 10K to 63K PN10 to PN450 Leakage FCI 70-2 Standard : ANSI Class IV Option : ANSI

Range End Connections Actuators Applications -150 o F to +1,050 o F -100 o C to +565 o C Option : -320 o F to +1,562 o F -196 o C to +850 o C Carbon steel(wcb,wcc),

15 High Performance Butterfly Valves V600 series The V600 series triple-offset butterfly valve high-performance in a rotary valve package. Its patented seating concept and adjustable travel actuator reduces dynamic unbalanced forces and permits seven flow rate adjustments. Triple Offset Butterfly Style Rating 3" to 36"(DN80 DN900) ANSI 150Lb to 2500Lb JIS 10K to 63K PN10 to PN450 Leakage FCI 70-2 Standard : ANSI Class IV Option : ANSI Class V Cv Range 130 to 43,000 Press. Range up to 6,170 psi(g) up to 434 kgf/cm 2 Temp. Range End Connections Actuators Applications -150 o F to +1,050 o F -100 o C to +565 o C Option : -320 o F to +1,562 o F -196 o C to +850 o C Carbon steel(wcb,wcc), Stainless steel(cf8,cf8m,cf3,cf3m) Chrome-moly(WC6,WC9,C12A) other alloys Wafer Flange less, RF/FF/RTJ Flanged, Butt weld Spring-diaphragm, Cylinder, Motorized, Electro-Hydraulic Fuel gas control, Low Pressure Steam & Water, General Services, Flash Tank, Condensate Recirculation, Auxiliary Steam, Deaerator Pegging Steam 14

High Performance Ball Valves V800 series The V800 Series metal seated Ball valve is flow conditioning technology and a unique ball arrangement, UNICON new and improved double design products

Trunnion Mounted 3-Piece & top entry style Rating 1" to 24"(DN25 DN600) ANSI 150Lb to 2500Lb JIS 10K to 63K PN10 to PN450 Leakage FCI 70-2 Standard : ANSI Class IV Option : ANSI Class V Cv Range

16 High Performance Ball Valves V800 series The V800 Series metal seated Ball valve is flow conditioning technology and a unique ball arrangement, UNICON new and improved double design products easily meet today most challenging special control process applications. Trunnion Mounted 3-Piece & top entry style Rating 1" to 24"(DN25 DN600) ANSI 150Lb to 2500Lb JIS 10K to 63K PN10 to PN450 Leakage FCI 70-2 Standard : ANSI Class IV Option : ANSI Class V Cv Range 55 to 113,400 Press. Range up to 6,170 psi(g) up to 434kgf/cm 2 Temp. Range End Connections Actuators Applications -150 o F to +1,050 o F -100 o C to +565 o C Option : -320 o F to +1,562 o F -196 o C to +850 o C Carbon steel(wcb,wcc), Stainless steel(cf8,cf8m,cf3,cf3m) Chrome-moly(WC6,WC9,C12A), other alloys NPT(BSFF), RF/FF/RTJ Flanged, Socket weld, Butt weld Spring-diaphragm, Cylinder, Motorized, Electro-Hydraulic Low Pressure Steam & Water, General Services, Flash Tank, Fuel Gas, Condensate Recirculation, Superheater and Reheat Spray, Desuperheater Water Spray, Gland Steam Pressure, Soot Blower, Steam Pressure, Auxiliary Steam Product of our comprehensive range of valves for the energy & process industries 15

Pneumatic Diaphragm Valve Actuators A100/200 series Economical design Simply top and top side mounted hand-wheels Height strength actuators case with rugged design Low volume between diaphragm and

17 Pneumatic Diaphragm Valve Actuators A100/200 series Economical design Simply top and top side mounted hand-wheels Height strength actuators case with rugged design Low volume between diaphragm and actuator case High stability Low hysteresis Compact design with reduced height Linear Motion Style(A100) 250, 290, 370, 480, 550 (mm Diameter) Air Supply 2.8 ~ 3.6 kgf/cm 2 Effective Area(cm 2 ) 270 to 1,520 Travel Range(mm) 10 to 120 Temp. Range -20 o F to +180 o F -30 o C to +80 o C Option : -40 o F to +248 o F -40 o C to +120 o C Case : Carbon steel Stem : Stainless steel Diaphragm : EPDM + Nylon Spring : Oil Tempered Spring Steel Seal : EPDM / Silicone Air Connections NPT(BSPP), PT : 1/4, 1/2 Option Top Handle, Side Handle, Top Side Handle Applications Globe Valves Desuperheater Rotary Quarter Turn Style(A200) 250, 290, 370, 480, 550 (mm Diameter) Air Supply 2.8 ~ 3.6 kgf/cm 2 Effective Area(cm2) 270 to 1520 Travel Range 60 to 90 Degree turn Temp. Range -20 o F to +180 o F -30 o C to +80 o C Option : -40 o F to +248 o F -40 o C to +120 o C Case : Carbon steel Stem : Stainless steel Diaphragm : EPDM + Nylon Spring : Oil Tempered Spring Steel Seal : EPDM / Silicone Housing : Carbon Steel Air Connections NPT(BSPP), PT : 1/4, 1/2 Option Top Handle, Top Side Handle Applications Rotary Quarter Turn Valves Ball Valve, Butterfly Valve 16

Pneumatic Cylinder Valve Actuators A300/400 series Economical design Simply top and top side mounted hand-wheels Height strength actuators case with rugged design High stability Low hysteresis

18 Pneumatic Cylinder Valve Actuators A300/400 series Economical design Simply top and top side mounted hand-wheels Height strength actuators case with rugged design High stability Low hysteresis Compact design with reduced height Linear Motion Style(A300) 300, 400, 500 (mm Diameter) Air Supply 5.0(7.0 Max.) kgf/cm 2 Effective Area(cm2) 730 to 2,027 Travel Range(mm) 30 to 500 above Temp. Range -20 o F to +180 o F -30 o C to +80 o C Option : -40 o F to +248 o F -40 o C to +120 o C Cylinder : Amalgan, Carbon Steel Stem : Stainless steel Piston : Carbon steel Spring : Oil Tempered Spring Steel Seal : EPDM / Silicone Air Connections NPT(BSPP), PT : 1/2 Option Top Handle, Side Handle, Top Side Handle Applications Globe Valves, Gate Valves, Desuperheater Rotary Quarter Turn Style(A400) 50 to 500 (mm Diameter) Air Supply 5.0(7.0 Max.)kgf/cm 2 Effective Area(cm2) to Travel Range 90 Degree turn ±5 Temp. Range -20 o F to +180 o F -30 o C to +80 o C Option : -40 o F to +248 o F -40 o C to +120 o C Cylinder : Aluminum, Carbon Steel Spring : Oil Tempered Spring Steel Seal : EPDM / Silicone Air Connections NPT(BSPP), PT : 1/4, 1/2 Option Top Handle, Top Side Handle Applications Rotary Quarter Turn Valves Ball Valve, Butterfly Valve, Plug Valve Product of our comprehensive range of valves for the energy & process industries 17

19 Product Gallery General Service Single Seated Type Severe Service High-Temperature Severe Service Cage Guided Type Severe Service Multi Stage Type Severe Service Angle Type Sever Service Motor ActuatedType Desuperheater Nozzle Spray Control Desuperheater Mechanical Nozzle Dual Type Control Valve Full Jacket Globe Single Seated Type General Service Special Ball Type Pressure Reducing Desuperheater Pressure Reducing Desuperheater Severe Service Gate Valve 18

20 UNICON Model Number V100 SERIES 2WAY GLOBE(ANGLE)CONTROL VALVE-UNBALANCED TYPE QUICK CHANGE TRIM V V011 P-PORT V102 MULTI - STEP (CASCADE) V103 MICRO FLOW SPLIT PLUG V110 CAGE WINDOWS V111 1-STAGE DRILLED HOLE CAGE V121 2-STAGE DRILLED HOLE CAGE (LOW-NOISE) V122 2-STAGE DRILLED HOLE CAGE (ANTI CAVITION) V131 3-STAGE DRILLED HOLE CAGE (LOW-NOISE) V132 3-STAGE DRILLED HOLE CAGE (ANTI CAVITION) V180 DISC STACK V184 HYBRID DISC STACK V200 SERIES 2WAY GLOVE(ANGLE) CONTROL VALVE - BALANCED TYPE QUICK CHAGE TRIM V V201 P-PORT V202 MULTI - STEP (CASCADE) V210 CAGE WINDOWS V211 1-STAGE DRILLED HOLE CAGE V221 2-STAGE DRILLED HOLE CAGE (LOW-NOISE) V222 2-STAGE DRILLED HOLE CAGE (ANTI CAVITION) V231 3-STAGE DRILLED HOLE CAGE (LOW-NOISE) V232 3-STAGE DRILLED HOLE CAGE (ANTI CAVITION) V280 DISC STACK V284 HYBRID DISC STACK V300 SERIES 3WAY GLOBE CONTROL VALVES-MIXING & DIVERTING TYPE QUICK CHANGE TRIM V300-XXXX V310 UNBALANCED TRIM-BOTTOM FLANGE TYPE V320 BALANCED TRIM BOTTOMFLANGE TYPE V330 UNBALANCED TRIM TOP FLANGE TYPE V400 SERIES PROV-PRESSURE REDUCING DESUPERHEATER VALVE V400-XXXX V600 SERIES TRIPLE OFFEST BUTTERFLY VALVE V600-XXXX V800 SERIES TRUNNION TYPE BALL VALVE V800-XXXX D400 SERIES DESUPERHEATER D400-XXXX D410 DAO D440 DAM A100 SERIES LINEAR TYPE PNEUMATIC DIAPHRAGM ACTUATOR A100-XXXX A120 RA TYPE A140 DA TYPE A200 SERIES ROTARY TYPE PNENUMATIC DIAPHRAGM ACTUATOR A200-XXXX A300 SERIES LINEAR TYPE PNEUMATIC CYLINDER ACTUATOR A300-XXXX A310 DOUBLE ACTING TYPE A320 SPRING RETURN RA TYPE A340 SPRING RETURN DA TYPE A400 SERIES ROTARY TYPE HEAVY-DUTY PNEUMATIC CYLINDER ACTUATOR A400-XXXX A410 DOUBLE ACTING TYPE A420 SPRING RETURN TA TYPE A440 SPRING RETURN DA TYPE Product of our comprehensive range of valves for the energy & process industries 19