24 2 Amp Amp Amp Amp. Packaging Specifications. O P T R D t S Units. Electrical Specifications

Transcription

1 JW Series Jumper Wire Ideal for crossovers or jumpers on circuit boards High current rating Part Number Electrical & Diameter Gauge Reference Current JW 50 R JW 55 R JW 60 R JW 80 R ± ± ± ± ± ± ± ± Amp Amp Amp Amp. Bulk packaging available upon request. Packaging Specifications O P T R D t S Units ± ± ± ± ± ± See TYPE above min min max max. CD Series Zero Ohm Resistors Ideal for crossovers or jumpers on circuit boards with auto-insertion capability High current rating Part Number Current Rating 70 C Dielectric Withstanding Voltage Marking Resistance CD 1/8 0 R 2A 300 Single black band 0.01Ω or less CD 1/4 0 R 3A 500 Single black band 0.01Ω or less CD 1/2 0 R 4A 600 Single black band 0.01Ω or less Type A - Body Length B - Body Diameter C - Lead Length (Bulk) D - Lead Diameter Units CD 1/8 CD 1/4 CD 1/ / / ± ± / / ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ±

2 RC Series Carbon Composition Resistors Non-inductive design Molded body for package uniformity Ideal for pulse-load handling characteristics available 1W now available Type Power Rating 70 C Continuous Working Voltage* Pulse Voltage Dielectric Withstanding Voltage Ohmic Range and Tolerance 10% 5% RC 1/4 0.25W Ω 5.6M 1Ω 5.6M RC 1/2 0.5W Ω 20M 1Ω 20M RC 1 1W 500 1,000 1, Ω 1.0M * Lesser of PR or maximum working voltage. Type RC 1/4 RC 1/2 RC 1 A Body Length ± ± / / ± ± 0.70 B Body Diameter ± ± ± ± ± ± 0.30 C Lead Length (Bulk) 1.18 ± ± ± ± ± ± 3.0 D Lead Diameter ± ± / / ± ± 0.05 Units How to Order RC 1/2 5.6M 5% R SEI Type Code Nominal Resistance Tolerance Packaging Code Tolerance Values Code Description Pkg Qty 1/4 5% E24 R Tape 5,000 1/2 10% E12 A Bulk 1,

3 RC Series Carbon Composition Resistors Resistance Temperature Characteristics Resistance Range -55 C +105 C % resistance change from room temperature (+25 C) value under 1K 1K to 9.1K 10K to 91K 100K to 910K 1 Mg to 10 Mg +2.0 to to to to to to to to to to -9.0 Performance Characteristics Test Test Results Test Method Voltage Proof Overload Termination Strength No breakdown or flashover ±2% +0.05Ω No visible damage, legible markings Tensile: ±2% +0.05Ω, No visible damage Bending: ±2% +0.05Ω, No visible damage Torsion: ±2% +0.05Ω, No visible damage V-block method RC 1/4 100 VAC, 60 seconds RC 1/2 500 VAC, 60 seconds 2.5 times the rated voltage or twice the limiting element voltage, whichever is less. Severe, 5 seconds 10N for 5 10 seconds 5N, twice 180 C, two rotations Solderability In accordance with Clause C, 5 seconds Resistance to Soldering Heat Temperature Shock Climatic Sequence Damp Test, Steady State 70 C 125 C ±3% +0.05Ω No visible damage, legible markings ±2% +0.05Ω No visible damage Insulation resistance: R 100M ohm. No visible damage Insulation resistance: R 100M ohm. No visible damage, legible marking Insulation resistance: R 1G ohm. No visible damage Insulation resistance: R 1G ohm. No visible damage After iersion into flux, the iersion into solder shall be carried out 4 from the body at 350 C for 3.5 seconds 5 cycles between -55 C to 125 C Dry/Damp heat: hour cycle, first cycle Cold/Damp heat: hour cycle, remaining cycle D.C. load 40 C 95% relative humidity for 56 days, test a, b, and c of Clause Rated voltage, 1.5 hours On, 0.5 hours Off at 70 C, 1,000 hours 125 C, no load, 1,000 hours Operating Temperature Range -55 C to C Reliability Test - Load Life in Moisture Criterion (%) Load Ratio P/Pn (%) Total Testing Time (Hrs) Number of Fractures (pcs) Failure Ratio λ λ CL (60%) Average Lifetime (60% reliability level) (Hrs) R/R ± x x x x x x x x 10 5 Total x x 10 5 ±10 Total 1.20 x x

4 CF Series Carbon Film Resistors General purpose resistor ideal for coercial/industrial applications Flame retardant coatings standard, flameproof optional (contact factory) Pana-Sert available on selected sizes (contact factory) Auto sequencing/insertion compatible CFM (mini) an ideal choice when size constraints apply Type Power Rating 70 C Working Voltage* Pulse Voltage Dielectric Withstanding Voltage Ohmic Range and Tolerance 2% 5% CF 1/ W Ω 4.7M 1Ω 22M CF 1/4 0.25W Ω 4.7M 1Ω 22M CF 1/2 0.5W Ω 4.7M 1Ω 22M CF 1 1W 500 1,000 1,000 1Ω 10M 1Ω 22M CF 2 2W 500 1,000 1,000 10Ω 1M 1Ω 22M CFM 1/4 0.25W Ω 1M 1Ω 22M CFM 1/2 0.5W Ω 4.7M 1Ω 22M * Lesser of PR or maximum working voltage. How to Order CF 1/2 4.7K 5% R SEI Type Code Nominal Resistance Tolerance Packaging Type Description Code Tolerance Values Code Description SEI Types Qty CF EIA Std 1/8 2% E24 R Tape CF 1/8, CF 1/4, CF 1/2 5,000 CFM Mini 1/4 5% E24 R Tape CFM 1/4, CFM 1/2 5,000 1/2 R Tape CF 1 2,000 1 R Tape CF 2 1,000 2 T Ao All 5,000 A Bulk All 1,000 43

5 WW/MWW Series General Purpose/Precision High performance for low cost Excellent stability in operation High power to size ratio MWW - Completely molded construction with welded terminations tested to MIL-R Complete welded terminations Tinned copper leads Available in non-inductive styles High temperature silicone coating Power Rating (Watts) Std. Resistance Range* (ohms) Type MIL-R-26 Ref. Dielectric 125 C 25 C (V) 0.1%, 0.5%, 1% & 5% WW H W 0.6W 0.1Ω 2K WW W 1.2W 0.1Ω 3K WW 1A RW W 1.5W 0.1Ω 7K WW 2 RW-69 1, W 2.5W 0.1Ω 10K WW 2A 1, W 3.0W 0.1Ω 15K WW 3 RW-79 1, W 3.7W 0.1Ω 22K WW 3A 1, W 4.0W 0.1Ω 30K WW 4 1, W 5.0W 0.1Ω 40K WW 5 RW-67, RW-74 1, W 6.0W 0.1Ω 50K WW 7 1, W 8.5W 0.1Ω 70K WW 7B 1, W 9.0W 0.1Ω 100K WW 10 RW-78 1,000 10W 13W 0.1Ω 150K MWW 1 RW-70 1, W 1.5W 0.1Ω 2K MWW 3 RW-79 1, W 3.75W 0.1Ω 20K MWW 5 RW-67, RW-74 1, W 6.5W 0.1Ω 40K MWW 10 RW-68, RW-74 1, W 13.0W 0.1Ω 150K *Standard TC as follows: ±90ppm below 1Ω, ±50ppm from 1-10Ω, & ±20ppm above 10Ω. How to Order WW 1 10K 1% R SEI Type Code Nominal Resistance Tolerance Packaging Type Code Tolerance Code Description Pkg Qty 11" Flange WW H 1 0.1% R WW H, WW 1, WW 1A, MWW 1 2,500 MWW 1A 2 0.5% R WW 2, WW 2A, WW 3, MWW 3 2,000 2A 3 1% R WW 3A 750 3A 4 5% R WW 4, WW 5, WW 7, WW 7B, MWW B 5 R WW 10, MWW

6 WW/MWW Series General Purpose/Precision Type A B C Tolerance ± 0.062/±1.6 ± 0.031/±0.8 ± 0.002/± WW H WW 1 WW 1A WW 2 WW 2A WW 3 WW 3A WW 4 WW 5 WW 7 WW 7B WW * * Type A B C * Available in Tolerance ± 0.015/±0.4 ± 0.015/±0.4 ± 0.002/± MWW MWW 3 MWW 5 MWW Units Units Test Moisture Resistance Performance Characteristics Results 1% max. Load Life 1% Temperature Cycling 0.5% Short Time Overload 1% 54