Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Transcription

1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Period of validity: to Holder of certificate: TÜV Rheinland Werkstoffprüfung GmbH Im raftwerk Jänschwalde, Peitz with its conformity assessment body TÜV Rheinland Werkstoffprüfung GmbH (Standort Halle) Magdeburger Chaussee 60, Halle (Saale) with the locations: Im raftwerk Jänschwalde, Teichland OT Neuendorf Am Grauen Stein, öln Lessingstraße 79 / Halle B1j, Berlin Im raftwerk Boxberg, Boxberg Tests in the fields: manual non-destructive testing methods (radiographic-, ultrasonic-, eddy current-, magnetic particle-, penetration-, leak-, acoustic emission- and visual testing), mechanized ultrasound testing, strain measurements as well as mobile Hardness test at metallic material in the metal production and metalworking industry, in the plant engineering as well as at systems- and mechanical engineering; corrosion tests, mechanical test, metallographic analysis and impression method at metallic material; analytics of measurement filters or solids on inorganic fibrous particles Abbreviations used: see last page The testing laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use standards or equivalent testing methods listed here with different issue dates. The testing laboratory maintains a current list of all testing methods within the flexible scope of accreditation. This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/15

2 The testing methods are marked with the following symbols for the sites at which they are performed: Berlin (B), Boxberg (Box), Jänschwalde (J), öln () Non-destructive testing Radiographic testing DIN EN ISO DIN EN ISO DIN EN ISO DIN EN DIN EN DVGW GW AD 2000-data sheets HP 5/3 AD 2000-data sheets HP 5/3 Annex 1 Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (here: chapter 6) Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors Founding - Radiographic examination Non-destructive testing - Radioscopic testing - Part 3: General principles for the radioscopic testing of metallic materials by X- and gamma rays Welding Joints of Steel Pipelines for Gas and Water Supply - Manufacturing, Testing and Evaluation (here: chapter 9) Manufacture and testing of joints - Non-destructive testing of welded joints (here for: radiographic testing) Non-destructive testing of welded joints - Minimum requirements for non-destructive testing methods (here for: radiographic testing) Period of validity: to Translation - 2/15

3 Ultrasonic testing DIN EN ISO DIN EN ISO DIN SEL DIN EN SEP DIN EN ISO SEP SEP SEP DIN EN ISO Non-destructive testing - Ultrasonic testing - General principles (here: chapter 9) Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (here: chapter 7-10 and annex A) Non-destructive Test; Ultrasonic Method of Testing Claddings, Produced by Welding, Rolling and Explosion Ultrasonically tested heavy plate - Technical delivery specifications Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method) Ultrasonic test of steel pipes for aberration Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections Non-destructive testing fusion welded ferritic steel pipes Ultrasonic test of steel pipes for transverse defects Ultrasonic tests for laminations of pipes of creep-resistant steels Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections Period of validity: to Translation - 3/15

4 SEP SEP SEP DIN EN DIN EN DIN EN SEP DIN EN DIN ISO DIN EN DIN EN ISO AD 2000-data sheets HP 5/3 Ultrasonic testing of rolled semi-finished products on internal material discontinuities Ultrasonic testing of forgings of ferritic steel Ultrasonic testing of steel forgings to stringent standards, in particular for components in turbine and generator systems Founding - Ultrasonic examination - Part 1: Steel castings for general purposes Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings Ultrasonic testing of castings made of cast iron with spheroidal-graphite Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings Plain bearings - Metallic multilayer plain bearings - Part 1: Non-destructive ultrasonic testing of bond of thickness Non-destructive testing - Ultrasonic thickness measurement Non-destructive testing of welds - General rules for metallic materials (here: ultrasonic testing) (here: chapter 6 and annex A) Manufacture and testing of joints - Non-destructive testing of welded joints (here: ultrasonic testing) Period of validity: to Translation - 4/15

5 AD 2000-data sheets HP 5/3 Annex 1 SEP SEP DIN ISO Non-destructive testing of welded joints - Minimum requirements for non-destructive testing methods (here: ultrasonic testing) Non-destructive testing of fusion-welded seams in pipes of stainless steels Non-destructive testing of resistance welded pipes of ferritic steels Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings Magnetic particle testing DIN EN ISO Non-destructive testing - Magnetic particle testing - Part 1: General principles (here: chapter 7-14) DIN EN ISO Non-destructive testing of welds - Magnetic particle testing SEP DIN EN DIN EN ISO DIN AD 2000-data sheet HP 5/3 Seam testing of castings of steel - Magnetic powder test Founding - Magnetic particle testing Non-destructive testing of welds - General rules for metallic materials Non-destructive testing -Magnetic leakage flux testing, general Manufacture and testing of joints - Non-destructive testing of welded joints (here: for magnet particle testing) Period of validity: to Translation - 5/15

6 AD 2000-data sheet HP 5/3 Annex 1 DIN EN Non-destructive testing of welded joints - Minimum requirements for non-destructive testing methods (here: for magnet particle testing) Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection Penetrant testing DIN EN ISO SEP DIN EN DIN EN DIN ISO DIN EN DIN EN ISO DIN EN ISO DIN EN ISO AD 2000-data sheet HP 5/3 Non-destructive testing - Penetrant testing - Part 1: General principles (here: chapter 6) Seam testing of castings of steel - Penetration testing Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings Founding - Liquid penetrant testing - Part 2: Investment castings Plain bearings; metallic multilayer plain bearings - Nondestructive penetrant testing Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings Non-destructive testing of welds - General rules for metallic materials (here: penetrant testing) (here: chapter 6 and annex A) Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 C Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 C Manufacture and testing of joints - Non-destructive testing of welded joints (here for: penetrant testing) Period of validity: to Translation - 6/15

7 AD 2000-data sheet HP 5/3 Annex 1 DIN EN Non-destructive testing of welded joints - Minimum requirements for non-destructive testing methods (here for: penetrant testing) Non-destructive testing of steel forgings - Part 2: Penetrant testing Leak testing DIN EN EN modification A Non-destructive testing - Leak testing - Bubble emission techniques Non-destructive testing - Leak testing - Test gas procedure Visual testing DIN EN ISO DIN EN AD 2000-data sheet HP 5/ DIN EN ISO DIN EN Non-destructive testing of welds - Visual testing of fusionwelded joints Non-destructive testing - Visual testing - General principles (here: chapter 5 + 6) Manufacture and testing of joints - Procedural basics (here: visual testing) Non-destructive testing of welds - General rules for metallic materials (here: visual testing) (here: chapter 6 and annex A) Founding - Examination of surface condition Acoustic emission testing DIN EN Non-destructive testing - Acoustic emission testing - Examination of metallic pressure equipment during proof testing - Planar location of AE sources Period of validity: to Translation - 7/15

8 VdTÜV-MB DRMB VdTÜV-MB DRMB DIN EN ISO ASME BPVC Sect DIN EN DIN EN ISO Guideline of acoustic emission tests at gas pressure testing on pressure vessels of gas tanks Guideline of acoustic emissions tests at gas pressure testing on gas tanks for compressed natural gas (CNG) in filling plants Non-destructive testing - Acoustic emission testing - General principles (here: chapter 7-10) Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing ASME Boiler & Pressure Vessel Code - Section 5: Nondestructive Examination Article 12: Acoustic Emission Examination of Metallic Vessels During Pressure Testing Article 13: Continuous Acoustic Emission Monitoring of Pressure Boundary Components Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid (here: chapter 5-8) Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission Eddy current testing DIN EN ISO DIN EN ISO DIN Non-destructive testing of welds - Eddy current examination of welds by complex plane analysis Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method Non-destructive testing; Eddy current testing of pipes and tubes; General remarks on testing using concentric test coils and the single-frequency method Period of validity: to Translation - 8/15

9 DIN DIN EN ISO DIN EN ISO DIN EN ISO SEP SEP SEP ASTM E ASTM E DIN EN ISO Non-destructive testing - Eddy current testing of pipes and tubes - Procedure Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method Non-destructive testing of fusion-welded seams in pipes of stainless steels Non-destructive testing of resistance welded pipes of ferritic steels Electromagnetic testing of pipes for the proof of impermeability Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation (withdrawn guideline) Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys (withdrawn guideline) Non-destructive testing - Eddy current testing - General principles (here: chapter 8-12) Period of validity: to Translation - 9/15

10 Strain measurement VDI/VDE/GESA 2635 Sheet VdTÜV-data sheet Experimental structural analysis - Recommended practice for high-temperature strain measurements Guidelines for the execution and evaluation of elongation measurements by wire strain gauges (DMS) Mechanical-technological testing Tensile- and creep tests DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO Destructive tests on welds in metallic materials - Transverse tensile test Destructive tests on welds in metallic materials - Fracture test Metallic materials - Tensile testing - Part 1: Method of test at room temperature (here: method B) Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature Metallic materials - Uniaxial creep testing in tension - Method of test Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints Metallic materials - Tube - Drift-expanding test Metallic materials - Tube - Ring tensile test Metallic materials - Tensile testing - Part 3: Method of test at low temperature Period of validity: to Translation - 10/15

11 VdTÜV data sheet ASTM E Verfahrensprüfung für das Einschweißen von Rohren in Rohrplatten (here: Rohrauszieh- und ausdrückversuch) Test Methods for Tension Testing of Metallic Materials Impact and bending tests DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO ASTM E Destructive tests on welds in metallic materials - Bend tests Metallic materials - Charpy pendulum impact test - Part 1: Test method Metallic materials - Bend test Metallic materials - Tube - Flattening test Test Methods for Notched Bar Impact Testing of Metallic Materials Hardness tests DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints Metallic materials - Brinell hardness test - Part 1: Test method Metallic materials - Vickers hardness test - Part 1: Test method Metallic materials - Rockwell hardness test - Part 1: Test method Steels - Determination and verification of the depth of carburized and hardened cases B, B, Period of validity: to Translation - 11/15

12 DIN EN DIN DIN DIN Iron and steel - Determination of the conventional depth of hardening after surface heating Metallic materials - Leeb hardness test - Part 1: Test method Hardness depth of heat-treated parts - Determination of the effective depth of hardening after nitriding Metallic materials - Hardness testing with the UCI method - Part 1: Test method Corrosion tests DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO correction DIN EN ISO ASTM A DIN EN Corrosion tests in artificial atmospheres - Salt spray tests Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferriticaustenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels Environmental testing - Part 2: Tests - Test a: Salt mist Period of validity: to Translation - 12/15

13 DIN EN ISO ASTM A ASTM G ASTM G VDA SEP Nickel-based alloys - Determination of resistance to intergranular corrosion Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium- Bearing Alloys Cyclic corrosion testing of materials and components in automotive construction Test of the resistance of high-alloy, corrosion-proof materials against intercrystalline corrosion Metallographic analysis DIN EN ISO DIN EN ISO DIN DIN EN ISO DIN EN ISO DIN Steels - Micrographic determination of the apparent grain size Copper and copper alloys - Estimation of average grain size Non-destructive testing - Impression methods for surface examination (Replica-technique) Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints Steels - Determination and verification of the depth of carburized and hardened cases Hardness depth of heat-treated parts - Determination of the effective depth of hardening after nitriding DIN EN ISO Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals Period of validity: to Translation - 13/15

14 ASTM E AVS 63A/ VDTÜV-data sheet / ASTM E ASTM E SEP ASTM A EURONORM ASTM E ASTM E Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count Determination of the content of delta ferrit in austenic steel with ferritic segregation Oberflächengefügeuntersuchungen zeitstandbeanspruchter Bauteile gemäß TRD 508 Determining average grain size Standard Test Methods for Determining the inclusion content of steel Microscopic test of free cutting steels for solid nonmetallic inclusions in metal by means of strip mosaics Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels Microscopic determination of the ferrite or austentic grain size of steels Standard Practice for Macroetching Metals and Alloys Standard Practice for Microetching Metals and Alloys Analytics of measuring filters or solids of inorganic fibrous particle VDI VDI 3861 Sheet Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method (without sampling) Stationary source emissions - Measurement of inorganic fibrous particles in exhaust gas - Scanning electron microscopy method (without sampling) BGI/GUV-I Method for determining different inorganic fibrous particles separately - Scanning electron microscopy method (without sampling) Period of validity: to Translation - 14/15

15 VDI 3866 Sheet VDI 3877 Sheet Determination of asbestos in technical products - Scanning electron microscopy method (without sampling) Indoor air pollution - Measurement of fibrous dust on settled on surfaces - Sampling and analysis (REM/EDXA) (without sampling) abbreviations used: AD HP ASTM AVS BGI DIN DVGW EN GESA ISO SEL SEP VDA VDE VDI VdTÜV Working group of pressure vessels; Production and testing American Society for Testing and Materials Standard operation procedure Emplyers Liability Insurance Association Information German Institute for Standardization German Technical and Scientific Association for Gas and Water European Standard Association of experimental microstructure analysis International Organization for Standardization Steel-iron delivery conditions of the Association of German Steel Steel and iron test sheet of the Association of German Steel Institute German Association of the Automotive Industry Association for Electrical, Electronical & Information Technologies Association of German Engineers Association of TÜVs Period of validity: to Translation - 15/15