Contents. AUrorA bearing company. Commercial/industrial units. Fax

Transcription

1

2 Uror bering compny ontents Page No. Page No. engineering ata - product information Fax ommercial/industrial units ro ens Spm, Sp Male Molded Race Series... Sp, Spg Female Molded Race Series... m, Male 2 pc. Economy..., g Female 2 pc. Economy...9 Vm, V Male Economy PTFE Lined... V, Vg Female Economy PTFE Lined... mm, m Male 3 pc. Precision... m, mg Female 3 pc. Precision... Km, K Male 3 pc. ear Resistant... K, Kg Female 3 pc. ear Resistant... Km, K, m, Male Large ore... K, Kg,, g Female Large ore... Lrge ore Male PTFE Lined... Lrge ore Female PTFE Lined...9 m & Male 2 pc. igh Strength... Vm & V Male 2 pc. igh Strength PTFE Lined... m, Male 3 pc. igh Strength..., g Female 3 pc. igh Strength...23 m-et, -et Male orrosion Resistant et, g-et Female orrosion Resistant...2 Sm, S Male 3 pc. orrosion Resistant...2 S, Sg Female 3 pc. orrosion Resistant... Sm-e, S-e Male 3 pc.stainless Steel...2 S-e, Sg-e Female 3 pc. Stainless Steel...29 ro en STuS...30 Jm nuts Inch and Metric...3 ro en LinKgeS...32 metri ro ens n SperiL erings m-m, -m Male 2 pc. Metric Economy... -m, g-m Female 2 pc. Metric Economy... mm-m, m-m Male 3 pc. Metric Precision...34 m-m, mg-m Female 3 pc. Metric Precision...3 Km-m, K-m Male 3 pc. Metric ear Resistant...3 K-m, Kg-m Female 3 pc. Metric ear Resistant...3 m-m, -m Male 3 pc. Metric igh Strength...3 -m, g-m Female 3 pc. Metric igh Strength...39 om-m Metric Spherical earings...40 SperiL erings om, om Standard Series...4 om-k, om-k ear Resistant...42 om-e Stainless Series...43 Lom Large Size...44 i, Si, mi...4 FrTure re Spherical Plain earings - Inch...4 FrTure re Spherical Plain earings - Metric...4 FrTure re Spherical Plain earings - Inch ptfe..4 FrTure re Spherical Plain earings - Metric ptfe..49 FrTure re Spherical Plain earings eavy uty Inch...0 FrTure re Spherical Plain earings eavy uty Metric... FrTure re Spherical Plain earings Extended idth all Inch...2 FrTure re Spherical Plain earings Extended idth all Metric...3 FrTure re ngular ontact Spherical Plain earings - Inch...4 FrTure re ngular ontact Spherical Plain earings - Metric... FrTure re ngular ontact Spherical Plain earings - Metric ptfe... FrTure re earings Interchange Guide... SuggeSTe ousing ores - Inch, Metric... SuggeSTe ousing ores - OM, OM, MI, I, SI..9 SuggeSTe ousing ores - LOM, OM-M...0 SpeiL units all earing Rod Ends... igh performance units ro ens Xm, X Male 3 pc. Extra Strength...2 Xm, X Male 3 pc. igh Strength lloy...3 rm, rxm Male 3 pc. igh Strength Nickel Plated...4 Xm-T, X-T Male igh Misalign/Strength PTFE Lined... prm-t, prxm-t Male 3 pc. igh Performance PTFE Lined.. Lm, L, XLm, XL Male luminum 3pc Series... SperiL erings -T, -Tg igh Misalignment PTFE Lined... pn-t, pn-tg igh Performance Narrow PTFE Lined... p-t, p-tg igh Performance ide PTFE Lined... military Specification units ro ens Sm-T, S-T Male igh Strength PTFE Lined...0 S-T, Sg-T Female igh Strength PTFE Lined... SperiL erings n-t, n-tg Narrow PTFE Lined...2 -T, -Tg ide PTFE Lined...3 ro ens gmm, gm Male General viation...4 gm, gmg Female General viation... itionl T & referene Spherical earing Installation..., Special Size Race ar Parts... Inch/Metric onversion Table...9 Engineering Information...0 Terms Translations... exlusive Rod Ends and Linkages...2 exlusive 2 and 3 rawings...3

3 UROR ERING OMPNY Manufacturing and worldwide supplier of the highest quality rod ends and spherical bearings - anywhere! GENERL INFORMTION In 9 a new company entered the rod end and spherical bearing marketplace. This new firm, urora earing ompany, soon became a major force in the rod end industry. Over the years, urora earing has retained its original business philosophy of furnishing a high quality product at competitive prices. In addition, the company's initial goals of providing prompt delivery and furnishing service with a personal touch have been rigidly maintained. urora earing offers a complete line of standard rod end and spherical bearings. e also design and manufacture special bearings to meet a variety of applications that require custom engineered units or special materials. Now marketing products worldwide, urora earing fields a very competent sales force that is available to assist and provide you with a practical and sound solution to rod end and spherical bearing application problems and challenges. PROUT INFORMTIONENGINEERING T RO ENS urora earing ompany rod ends are, unless noted, manufactured utilizing two construction styles. They are of the two or three-piece type. oth are made with the solid, or onepiece, race construction method and feature the advantages of metal-to-metal contact between bearing components. (PTFE to metal interface may also be incorporated when specified). The standard two-piece style consists of a body and precision ground heat treated steel ball. This type of construction allows the rod end body to carry a greater radial static load. This configuration also offers greater misalignment capabilities. variety of materials and plating options for the component parts in this series are available. ny cold-formable steel in stainless and alloy steel categories can be specified for the body, and all hardenable alloys such as and 440 stainless steel may be employed for the ball component. The three-piece style consists of a body, ball and race. This type of unit, offering fully swaged bearing construction, features the advantages of maximum spherical conformity between the ball and race. It also offers flexibility in that many different types of materials can be interchanged in each component part, providing combinations that can be tailored to meet just about any application requirement. SPERIL ERINGS These bearings incorporate the single piece race type construction, also providing excellent ball-to-race conformity. They can be re-lubricated through an annular groove in the outer race with two interconnecting holes positioned at 0 degrees. Various metals may also be substituted in these types of units to meet special requirements. Recommended housing bores are given on pages -0. PTFE LINE RO ENS N SPERIL ERINGS omposite PTFE lined races are available as noted in most rod end bearing units and all spherical bearings. The steel race has a self-lubricating liner; a PTFE impregnated woven fabric, chemically bonded to the inner diameter of the race, and is denoted by the suffix T. ll urora earing liner style options are maintenance free and offer improved frictional characteristics. They have been developed by urora engineers specifically for bearing use, and are exclusive to urora earing products. Except as noted, T00 is supplied as the standard liner in all commercial units. It is designed primarily to satisfy the demands of the commercial/industrial market as well as most high performance applications. This liner can be used in temperatures ranging from - to +20 F. Fax Known primarily for a high quality product and a strong commitment to customer service, the firm dramatically increased its market coverage and now serves nearly every industry and aerospace market. These markets include among others: textile and packaging machinery, machine tools, business machines, recreation and exercise equipment, agricultural and off highway vehicles, commercial transportation and high performance racing vehicles as well as military equipment and commercial air and space craft. onsult our engineering department for materials to fit your special application. Materials used in the standard catalog items are outlined on the appropriate detail page. T30 is an ultra-high performance liner fully qualified to SES (formerly MIL--), developed for military and aircraft/aerospace applications. This liner offers higher load carrying capacity as well as greatly increased dynamic wear characteristics and can be used in temperatures ranging from - to +32 F. This liner is standard on all military specification bearings manufactured by urora earing, as well as certain high performance commercial bearings used in the automotive racing industry. It can also be specified on other lined products manufactured by urora earing where demanding applications require its superior performance characteristics. T is used in commercial units with stainless steel race construction. It is tailored for applications with aqueous environments. urora earing also has available a variety of alternate liner configurations to suit special requirements. urora 2 piece rod ends with the prefix V use urora s jacketed composite liner, resulting in the benefits of a PTFE lined bearing at an economical price. Information on these and other liner configurations can be found at 3

4 Fax ULTIMTE RIL STTI LO PITY RO ENS RIL STTI LIMIT LO PITY SPERIL ERINGS The ultimate radial static load capacity is based upon the minimum mechanical properties of the design configuration in the stressed area. The ultimate radial static load capacity called out in the rod end specification charts is defined as a single cycle, unidirectional applied load to cause ultimate failure. Operating loads should be based on the static load ratings, incorporating appropriate safety factors to suit the application. hen a rod end is to be applied in full rotation, the surface speed of the ball should be kept below feet per minute or the rotational speed should be below 0 RPM, whichever is lower, with the operating loads not to exceed % of the ultimate radial static load. static limit loads are maximum static based on the maximum permanent set in the bearing race of 0.2% of the ball diameter. If greater permanent set can be allowed or if alternate race materials are used consult our engineering department for change factors. Operating loads are based on the radial static limit load rating and appropriate safety factors should be utilized to suit the application. Load ratings listed in the standard detail pages are applicable to rod ends supplied without grease fittings. Load ratings for units employing fittings may be affected due to lighter cross section in the stressed area. For information on the rod end radial static load ratings with fittings and other specific load rating information, consult the urora earing engineering department. XIL STTI LO PITY RO ENS xial static load capacity is the force that is applied through the bore of the ball. For urora two-piece rod ends, maximum axial static load capacity is recommended to be percent of the ultimate radial static load capacity. For three-piece rod ends, maximum axial static load capacity is generally recommended as percent of ultimate radial static load capacity. It should be noted, however, that on three-piece units factors such as race material, body material and dimensions may affect axial static load capacity. For further information, consult the urora earing engineering department. a a2 FIGURE 2 a2 = Sin- - Sin- FIGURE a = Sin- - Sin- 4 ERING MISLIGNMENT rod end or spherical bearing's ability to misalign is measured by the degree of angle the ball can accommodate without interference. The angle of misalignment in a rod end is limited by the ball width and head diameter as shown in figure. This arrangement is called a clevis mount, and is the type represented in the standard rod end detail pages. If added misalignment is necessary, this can be accomplished by utilizing spacers between the clevis mounting and ball face, or by using special rod ends designed to meet specific requirements. Misalignment angle in a spherical bearing is limited by the ball and race width with respect to the ball diameter, illustrated in figure 3. This is the mounting type represented in the standard detail pages for spherical bearings. Mounting arrangements for spherical bearings such as shown in figures 2 through 4 are also used with rod ends. The misalignment angle is then calculated by selecting the proper formula below. NGLE OF MISLIGNMENT a3 a2 a Max axial load is recommended at percent of the radial static load. Extreme care should be used on selecting a sufficiently strong housing to accept this type of bearing. a4 a3 a4 FIGURE 3 a3 = Sin- R - Sin- R FIGURE 4 a4 = os- R - Sin- R Reference Letters - all ore M - Outer Race hamfer - ead iameter of Outer Race iameter R - all iameter - ousing idth - (-2M) all idth

5 3-PIEE N 2-PIEE ERING ESIGN 3-Piece Unit SSEMLE OUSING N INSERT IN PRE-STKING POSITION INSERT OUSING onsists of LL and RE SSEMLE OUSING N INSERT IN STKE POSITION NOTE - Re-Lube hole for lubrication through shank of housing. Single piece race, steel, heat-treated (optional), features swaged construction for maximum performance. lternate race materials available to suit your application. Note extension of race beyond width of housing in the prestaking position. fter staking, the sides of race have been upset into chamfers. all is subsequently loosened holding close tolerance fits between ball and race. Fax hamfers on both sides 2-Piece Unit ousing ready for swaging Precision ground ball - (available in alternate materials) - for close tolerance fits. ousing and all in pre-swaging position. Sides of housing are closed around ball for maximum strength unit.

6 SPM & SP SERIES MLE RO ENS Fax Molded Race Economy ody - Low carbon steel, protective coated for corrosion resistance. all - lloy steel, heat treated, hard chrome Race - Molded, selflubricating, reinforced Nylon. This series features a molded race compound designed to provide low friction, low moisture absorbing properties. RO EN NO. IMENSIONS IN INES ± ±.0 all ia. ±.02 UNF-2 SPM-3 SPM-4 SPM- SPM- SPM- SPM- SPM- SPM- SP-3 SP-4 SP- SP- SP- SP- SP- SP /4-2 /-24 3/-24 /- /2- /- 3/4- RO EN NO. This series is also available in a studded configuration. Specify by adding suffix S. Ex: SPM-S IMENSIONS IN MILLIMETERS ± ±.3 all ia. ±. UNF-2 SPM-3 SPM-4 SPM- SPM- SPM- SPM- SPM- SPM- SP-3 SP-4 SP- SP- SP- SP- SP- SP /4-2 /-24 3/-24 /- /2- /- 3/4- Misalign. Static Load rg. t. ngle apacity,2.02 2, ,40.0 4,2.,30.,430.23,300.3,900. Misalign. Static Load rg. t. ngle apacity Grams Newtons,32,9, 32, ,9 2,0 3,9 4,43 2

7 SP & SPG SERIES FEMLE RO ENS Molded Race Economy Fax ody - Low carbon steel, protective coated for corrosion resistance. all - lloy steel, heat treated, hard chrome Race - Molded, selflubricating, reinforced Nylon. This series is also available in a studded configuration. Specify by adding suffix S. Ex: SP-S This series features a molded race compound designed to provide low friction, low moisture absorbing properties. RO EN NO. IMENSIONS IN INES ± ±.0 K ±.0 J ±.0 all ia. ±.02 SP-3 SP-4 SP- SP- SP- SP- SP- SP- SPG-3 SPG-4 SPG- SPG- SPG- SPG- SPG- SPG RO EN NO. IMENSIONS IN MILLIMETERS ± ±.3 K ±.3 J ±.3 all ia. ±. SP-3 SP-4 SP- SP- SP- SP- SP- SP- SPG-3 SPG-4 SPG- SPG- SPG- SPG- SPG- SPG Misalign. Static Load rg. t. UNF-2 ngle apacity -32,2.04 /4-2 2,40.0 /-24 2,40.0 3/-24 4,0. /-,30.9 /2-,430.3 /-, /4-,900. Misalign. Static Load rg. t. UNF-2 ngle apacity Grams Newtons -32,32 /4-2,9 /-24, 3 3/-24,23 /- 23,9 /2-2,0 2 /- 3,9 2 3/4-4,43 30

8 M & SERIES MLE RO ENS Fax General Purpose - Economy ody - Low carbon steel, protective coated for corrosion resistance. all - lloy steel, heat treated, hard chrome Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department. RO EN NO. IMENSIONS IN INES ±.00 ±.0 all ia UNF-3 M-3 M-4 M- M- M- M- M- M /4-2 /-24 3/-24 /- /2- /- 3/4- RO EN NO. Grease fittings not available on these sizes. Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: M-Z F Flush type fitting Ex: M-F IMENSIONS IN MILLIMETERS ±. ±.3 all ia UNF-3 M-3 M-4 M- M- M- M- M- M /4-2 /-24 3/-24 /- /2- /- 3/4- Misalign. Static Load rg. t. ngle apacity,4.03 2,2.04 3,.0,0.,34., ,.3 24,. Misalign. Static Load rg. t. ngle apacity Grams Newtons,3 9,39,9 32,42 0 2,3 3, , ,93 29

9 & G SERIES FEMLE RO ENS General Purpose - Economy Fax ody - Low carbon steel, protective coated for corrosion resistance. all - lloy steel, heat treated, hard chrome hand units have identification groove near end of shank. RO EN NO. Grease fittings not available on these sizes. Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: -Z F Flush type fitting Ex: -F IMENSIONS IN INES ±.00 ±.0 K ±.0 J ±.0 all ia G-3 G-4 G- G- G- G- G- G RO EN NO. IMENSIONS IN MILLIMETERS ±. ±.3 K ±.2 J ±.2 all ia G-3 G-4 G- G- G- G- G- G Misalign. Static Load rg. t. UNF-2 ngle apacity -32 2,09.04 /4-2 3,.0 /-24 3,24.0 3/-24,0. /-,3. /2-9,09.29 /- 2 9,.43 3/4-24,. Misalign. Static Load rg. t. UNF-2 ngle apacity Grams Newtons -32 9,24 /4-2,29 23 /-24, /-24, 9 /- 2,400 2 /2-40,49 2 /- 2 43,3 9 3/4-24 3,

10 VM & V SERIES MLE RO ENS Fax General Purpose - Economy - Self-Lubricating ody - Low carbon steel, protective coated for corrosion resistance. all - lloy steel, heat treated, hard chrome ushing - Steel acked, PTFE omposite RO EN NO. IMENSIONS IN INES ±.00 ±.0 all ia UNF-3 VM- VM- VM- VM- VM- VM- V- V- V- V- V- V /-24 3/-24 /- /2- /- 3/4- RO EN NO. IMENSIONS IN MILLIMETERS ±. ±.3 all ia UNF-3 VM- VM- VM- VM- VM- VM- V- V- V- V- V- V /-24 3/-24 /- /2- /- 3/4- Misalign. Static Load rg. t. ngle apacity 2,23 3,43 4,44,9,4, Misalign. Static Load rg. t. ngle apacity Grams Newtons,,4 9, 32, 3,49 4,

11 V & VG SERIES FEMLE RO ENS General Purpose - Economy - Self-Lubricating Fax ody - Low carbon steel, protective coated for corrosion resistance. all - lloy steel, heat treated, hard chrome ushing - Steel acked, PTFE omposite hand units have identification groove near end of shank ±.00 ±.0 K ±.0 J ±.0 all ia Misalign. Static Load rg. t. UNF-2 ngle apacity V- V- V- V- V- V- VG- VG- VG- VG- VG- VG /-24 3/-24 /- /2- /- 3/4- RO EN NO. IMENSIONS IN INES 2,23 3,43 4,44,9,4, ±. ±.3 K ±.2 J ±.2 all ia Misalign. Static Load rg. t. UNF-2 ngle apacity Grams Newtons V- V- V- V- V- V- VG- VG- VG- VG- VG- VG /-24 3/-24 /- /2- /- 3/4- RO EN NO. IMENSIONS IN MILLIMETERS,,4 9, 32, 3,49 4,

12 MM & M SERIES MLE RO ENS General Purpose - Precision (PTFE Liners vailable) ody - arbon steel protective coated for corrosion resistance. No. series standard body is alloy steel not heat treated. Fax Race - arbon steel, protective coated for corrosion resistance. all - lloy steel, heat treated, hard chrome Notes - ll sizes available with studs upon request. heck availability. Grease fitting not available. s -32 UN. 2 s - UNS. 3 Tolerance variation: ±.0, ±.0, +.003, -.000, ±.0 4 Tolerance variation: ±., ±., +.09, -.0, ±.2 RO EN NO MM-2 M-2 MM-3 M-3 MM-4 M-4 MM- M- MM- M- MM- M- MM- M- MM- M- MM- M- MM- M- MM-- M-- MM- M- MM-- M-- MM--2 M--2 IMENSIONS IN INES ±.00 ±.0 ±.0 all ia UNF /4-2 /-24 3/-24 /- /2- /- 3/4- /- /- / RO EN NO MM-2 M-2 MM-3 M-3 MM-4 M-4 MM- M- MM- M- MM- M- MM- M- MM- M- MM- M- MM- M- MM-- M-- MM- M- MM-- M-- MM--2 M--2 Units are supplied without grease fittings. hen grease fittings are required, specify by adding suffixes as designated. Z Zerk type fitting Ex: MM-Z F Flush type fitting Ex: MM-F T PTFE liner Ex: MM-T Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department. IMENSIONS IN MILLIMETERS ±. ±.3 ±.2 all ia UNF /4-2 /-24 3/-24 /- /2- /- 3/4- /- /- / Misalign. Static Load rg. t. ngle apacity 02,9 2, 2,4 3,9 4,,0,34,,4,43 43,4 43,4 43, Misalign. Static Load rg. t. ngle apacity Grams Newtons 2,23,9 9,00,3,4,9 29,24 32,2,23 2,,0 93,0 93,0 93, ,09 9 9

13 M & MG SERIES FEMLE RO ENS General Purpose - Precision (PTFE Liners vailable) ody - arbon steel protective coated for corrosion resistance. No. series standard body is alloy steel not heat treated. Race - arbon steel, protective coated for corrosion resistance. Notes - ll sizes available with studs upon request. heck for availability hand units have identification groove near end of shank s -32 UN 2 s - UNS 3 Tolerance variation: ±.0, ± , -.000, ±.0, K ±.0, J ±.0 4 Tolerance variation: ±., ±. +.09, -.0, ±.2, K ±.3, J ± ±.00 ±.0 ±.0 K ±.0 J ±.0 all ia Misalign. Static Load rg. t. UNF-2 ngle apacity M-2 MG-2.0 M-3 MG M-4 MG M- MG-.3 M- MG-.30 M- MG- M- MG- 0 M- MG-.20 M- MG- 0 M- MG- 0 M-- MG-- 0 M- MG- 0 M-- MG-- 0 M--2 MG /4-2 /-24 3/-24 /- /2- /- 3/4- /- /- / RO EN NO IMENSIONS IN INES M-2 MG-2 M-3 MG-3 M-4 MG-4 M- MG- M- MG- M- MG- M- MG- M- MG- M- MG- M- MG- M-- MG-- M- MG- M-- MG-- M--2 MG--2,2,3 2,39 3,3 3,9 4,,0,34,,4,43 40,9 43,4 43, ±. ±.3 ±.2 K ±.2 J ±.2 all ia Misalign. Static Load rg. t. UNF-2 ngle apacity Grams Newtons /4-2 /-24 3/-24 /- /2- /- 3/4- /- /- / RO EN NO. Grease fitting not available. Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: M-Z F Flush type fitting Ex: M-F T PTFE liner Ex: M-T IMENSIONS IN MILLIMETERS,344,0,29,934,4,9 29,24 32,2,23 2,,0 93,0 93,0 93,0 Fax all - lloy steel, heat treated, hard chrome ,093,093

14 KM & K SERIES MLE RO ENS General Purpose - Precision - ear Resistant ody - arbon steel protective coated for corrosion resistance. No. series standard body is alloy steel not heat treated. Race - lloy steel, heat treated, protective coated for corrosion resistance. Fax all - lloy steel, heat treated, hard chrome Notes - ll sizes available with studs upon request. heck for availability. Tolerance variation: ±.0, ±.0, +.003, -.000, ±.0 2 Tolerance variation: ±., ±., +.09, -.0, ±.2 3 s - UNS. RO EN NO. IMENSIONS IN INES ±.00 ±.0 ±.0 all ia UNF-3 KM-3 KM-4 KM- KM- KM- KM- KM- KM- KM- KM- KM-- KM--2 K-3 K-4 K- K- K- K- K- K- K- K- K-- K /4-2 /-24 3/-24 /- /2- /- 3/4- /- / RO EN NO Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: KM-Z F Flush type fitting Ex: KM-F Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department. IMENSIONS IN MILLIMETERS ±. ±.3 ±.2 all ia UNF-3 KM-3 KM-4 KM- KM- KM- KM- KM- KM- KM- KM- KM-- KM-- K-3 K-4 K- K- K- K- K- K- K- K- K-- K /4-2 /-24 3/-24 /- /2- /- 3/4- /- / Misalign. Static Load rg. t. ngle apacity,9 2, 2,4 3,9 4,,0,34,,4 43,4 43,4 43, Misalign. Static Load rg. t. ngle apacity Grams Newtons,9 9,00,3,4,9 29,24 32,2,23 2, 93,0 93,0 93, ,09 9 9

15 K & KG SERIES FEMLE RO ENS General Purpose - Precision - ear Resistant ody - arbon steel protective coated for corrosion resistance. No. series standard body is alloy steel not heat treated. Race - lloy steel, heat treated, protective coated for corrosion resistance. Notes - ll sizes available with studs upon request. Units are supplied without grease fittings. hen a heck for availability grease fitting is required, specify by adding suffix as hand units have identification groove near end of shank. Tolerance variation: ±.0, ± , -.000, ±.0, K ±.0, J ±.0 designated. Z Zerk type fitting Ex: K-Z 2 Tolerance variation: ±., ±. +.09, -.0, ±.2, K ±.3, J ±.3 F Flush type fitting Ex: K-F 3 s - UNS ±.00 ±.0 ±.0 K ±.0 J ±.0 all ia Misalign. Static Load rg. t. UNF-2 ngle apacity KG KG KG-.3 KG-.30 KG- KG- 0 KG-.20 KG- 0 KG- 0 KG- 0 KG-- 0 KG /4-2 /-24 3/-24 /- /2- /- 3/4- /- / RO EN NO. K-3 K-4 K- K- K- K- K- K- K- K- K-- K--2 IMENSIONS IN INES 2 2,3 2,39 3,3 3,9 4,,0,34,,4 40,9 43,4 43, ±. ±.3 ±.2 K ±.2 J ±.2 all ia Misalign. Static Load rg. t. UNF-2 ngle apacity Grams Newtons K-3 K-4 K- K- K- K- K- K- K- K- K-- K--2 KG-3 KG-4 KG- KG- KG- KG- KG- KG- KG- KG- KG-- KG /4-2 /-24 3/-24 /- /2- /- 3/4- /- / RO EN NO. 2 IMENSIONS IN MILLIMETERS,0,29,934,4,9 29,24 32,2,23 2,,4 93,0 93,0 Fax all - lloy steel, heat treated, hard chrome ,093,093

16 LRGE ORE SERIES MLE RO ENS General Purpose & igh Strength Precision ear Resistant (PTFE Liners vailable) RO ENS Fax /4, /2 & 2 SIZES ody (K-Series) - lloy steel, protective coated for corrosion resistance. ody (-Series) - lloy steel, heat treated, protective coated for corrosion resistance. Race - steel, heat treated, protective coated for corrosion resistance. all - steel, heat treated, protective coated for corrosion resistance. Tolerance variation: ±.00 2 s 2- UN-3 Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: KM-24Z- F Flush type fitting Ex: KM-24F- T PTFE liner Ex: KM-24T- K-SERIES OY NON ET-TRETE RO EN NO. IMENSIONS IN INES ±.0 ± ±.030 all ia UNF-3 KM-- KM-24- KM-32- K-- K-24- K /4- /2-2-2 Misalign. Static Load rg. t. ngle apacity ,00 4,0 3, SERIES/XM-SERIES OY ET-TRETE RO EN NO. IMENSIONS IN INES ±.0 ± ±.030 all ia UNF-3 M-- XM-- M-24- XM-24- M X X /4- /2- /2-3/4-2-2 Misalign. Static Load rg. t. ngle apacity ,2 9,2,40,40,

17 LRGE ORE SERIES FEMLE RO ENS General Purpose & igh Strength Precision ear Resistant (PTFE Liners vailable) RO ENS /4, /2 & 2 SIZES Fax ody (K-Series) - lloy steel, protective coated for corrosion resistance. ody (-Series) - lloy steel, heat treated, protective coated for corrosion resistance. Race - steel, heat treated, protective coated for corrosion resistance. all - steel, heat treated, protective coated for corrosion resistance. Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: K-24Z- F Flush type fitting Ex: K-24F- T PTFE liner Ex: K-24T- Tolerance variation: ±.00, K ±.0, J ±.0, F ±.0 2 s 2- UN-2 K-SERIES OY NON ET-TRETE RO EN NO ±.0 ± ±.030 K ±.04 J ±.030 F ±.030 all ia. K-- KG-- 0 K-24- KG-24- K-32- KG IMENSIONS IN INES Misalign. Static Load rg. t. UNF-2 ngle apacity 2. /4-2.2 / , ,0.0 3,2.00 -SERIES OY ET-TRETE RO EN NO ±.0 ± ±.030 K ±.04 J ±.030 F ±.030 all ia. -- G G G IMENSIONS IN INES Misalign. Static Load rg. t. UNF-2 ngle apacity 2. /4-2.2 / ,2 2.,40.0,924.00

18 LRGE ORE SERIES MLE RO ENS General Purpose & igh Strength Precision PTFE Lined RO ENS Fax /4, /2 & 2 SIZES ody (M-Series) - lloy steel, protective coated for corrosion resistance. ody (-Series) - lloy steel, heat treated, protective coated for corrosion resistance. Race - arbon steel, PTFE lined. all - lloy steel, heat treated, hard chrome s 2- UN-3 M-SERIES OY NON ET-TRETE RO EN NO. IMENSIONS IN INES ±.00 ±.0 ± ±.030 all ia UNF-3 MM-T MM-24T MM-32T M-T M-24T M-32T /4- /2-2- Misalign. Static Load rg. t. ngle apacity ,40,24 3, SERIES OY ET-TRETE RO EN NO. IMENSIONS IN INES ±.00 ±.0 ± ±.030 all ia UNF-3 M-T M-24T M-32T -T -24T -32T /4- /2-2- Misalign. Static Load rg. t. ngle apacity 9.0..,04,,

19 LRGE ORE SERIES FEMLE RO ENS General Purpose & igh Strength Precision PTFE Lined RO ENS /4, /2 & 2 SIZES Fax ody (M-Series) - lloy steel, protective coated for corrosion resistance. ody (-Series) - lloy steel, heat treated, protective coated for corrosion resistance. Race - arbon steel, PTFE lined. all - lloy steel, heat treated, hard chrome s 2- UN-2 M-SERIES OY NON ET-TRETE RO EN NO. IMENSIONS IN INES ±.00 ±.0 ± ±.030 K ±.04 J ±.030 F ±.030 all ia. M-T MG-T 0 M-24T MG-24T M-32T MG-32T Misalign. Static Load rg. t. UNF-2 ngle apacity 2. /4-2.2 / ,40 2.,24.0 3, SERIES OY ET-TRETE RO EN NO. IMENSIONS IN INES ±.00 ±.0 ± ±.030 K ±.04 J ±.030 F ±.030 all ia. -T G-T 0-24T G-24T -32T G-32T Misalign. Static Load rg. t. UNF-2 ngle apacity 2. /4-2.2 / ,04 2.,.0,

20 M & SERIES MLE RO ENS Fax igh Strength Economy Series ody - lloy steel, heat treated, protective coated for corrosion resistance. all - lloy steel, heat treated, hard chrome Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: M-Z F Flush type fitting Ex: M-F Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department. Grease fitting not available on this size. RO EN NO. IMENSIONS IN INES ±.0 all ia UNF-3 M- M- M- M- M- M /-24 3/-24 /- /2- /- 3/4- RO EN NO. IMENSIONS IN MILLIMETERS all ia UNF-3 M- M- M- M- M- M /-24 3/-24 /- /2- /- 3/4- Misalign. Static Load rg. t. ngle apacity 2 24,4 9,0,44,49,40 24, Misalign. Static Load rg. t. ngle apacity Grams Newtons ,3 40,423 0,90,,0,

21 VM & V SERIES MLE RO ENS igh Strength Self Lubricating Economy Series Fax ody - lloy steel, heat treated, protective coated for corrosion resistance. all - lloy steel, heat treated, hard chrome ushing - Steel acked, PTFE omposite RO EN NO. IMENSIONS IN INES ±.0 all ia UNF-3 VM- VM- VM- VM- VM- VM- V- V- V- V- V- V /-24 3/-24 /- /2- /- 3/4- RO EN NO. IMENSIONS IN MILLIMETERS all ia UNF-3 VM- VM- VM- VM- VM- VM- V- V- V- V- V- V /-24 3/-24 /- /2- /- 3/4- Misalign. Static Load rg. t. ngle apacity,032,,04,42,, Misalign. Static Load rg. t. ngle apacity Grams Newtons,32 29,09 3,24 9,,30 94,

22 M & SERIES MLE RO ENS igh Strength lloy Precision (PTFE Liners vailable) ody - lloy steel, heat treated, protective coated for corrosion resistance. Fax Race - lloy steel, heat treated, protective coated for corrosion resistance (arbon steel with PTFE Liners). all - lloy steel, heat treated, hard chrome RO EN NO. IMENSIONS IN INES ±.00 ±.0 ±.0 all ia UNF-3 M-3 M-4 M- M- M- M- M- M- M-- M- M-- M- M-- M /4-2 /-24 3/-24 /- /2- /- 3/4- /- /- /- / RO EN NO. 2 Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: M-Z F Flush type fitting Ex: M-F T PTFE liner Ex: M-T Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department. heck for availability. Tolerance variation: ±.0, ±.0, +.003, -.000, ±.0 heck for availability. 2 Tolerance variation: ±., ±., +. 09, -.0, +.2 heck for availability. 3 s - UNS. 2 2 IMENSIONS IN MILLIMETERS ±. ±.2 ±.2 all ia UNF-3 M-3 M-4 M- M- M- M- M- M- M-- M- M-- M- M-- M /4-2 /-24 3/-24 /- /2- /- 3/4- /- /- /- / Misalign. Static Load rg. t. ngle apacity 2,,,39 9,44,2,23,9 2,0 2,0 4,0,92,0,0, Misalign. Static Load rg. t. ngle apacity Grams Newtons,9 23,39,9 42,40 4,4 2,23 9, 4,9 4,9 0,3 24,,93,93, ,09 9 9

23 & G SERIES FEMLE RO ENS igh Strength lloy Precision (PTFE Liners vailable) ody - lloy steel, heat treated, protective coated for corrosion resistance. Race - lloy steel, heat treated, protective coated for corrosion resistance (arbon steel with PTFE Liners). heck for availability. hand units have identification groove near end of shank Tolerance variation: ±.0, , -.000, ±.0, K ±.0, J ±.0 heck for availability. 2 Tolerance variation: ±., , -.0, ±.2, K ±.3, J +.3 heck for availability. 3 s - UNS 4 Notes and 2 both have UNF-2 threads ±.00 ±.0 ±.0 K ±.0 J ±.0 all ia Misalign. Static Load rg. t. UNF-3 ngle apacity G-3 G-4 G- G- G- G- G- G- G- G- G-- G /4-2 /-24 3/-24 /- /2- /- 3/4- /- / RO EN NO. IMENSIONS IN INES 2 2 3,,90,39 9,44,2,23,9 2,0 4,0,0,0, ±. ±.2 ±.2 K ±.2 J ±.2 all ia Misalign. Static Load rg. t. UNF-3 ngle apacity Grams Newtons G-3 G-4 G- G- G- G- G- G- G- G- G-- G /4-2 /-24 3/-24 /- /2- /- 3/4- /- / RO EN NO. 2 Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: -Z F Flush type fitting Ex: -F T PTFE liner Ex: -T IMENSIONS IN MILLIMETERS,02,3,9 42,40 4,4 2,23 9, 4,9 0,3,93,93,93 Fax all - lloy steel, heat treated, hard chrome ,093,093 23

24 M-ET & -ET SERIES STINLESS STEEL MLE RO ENS Fax orrosion Resistant Precision Self Lubricating ody - -4 P stainless steel (MS 342) heat treated. all stainless steel (MS 30), heat treated, hard chrome ushing - -4 P stainless steel, heat treated, PTFE lined. () Manufacturer s Option: -2 RO EN NO. IMENSIONS IN INES ±.0 all ia UNF-3 () M-ET M-ET M-ET M-ET M-ET M-ET -ET -ET -ET -ET -ET -ET /-24 3/-24 /- /2- /- 3/4- RO EN NO. 24 IMENSIONS IN MILLIMETERS all ia UNF-3 M-ET M-ET M-ET M-ET M-ET M-ET -ET -ET -ET -ET -ET -ET /-24 3/-24 /- /2- /- 3/4- Misalign. Static Load rg. t. ngle apacity,4, 9,30,0,9 2, Misalign. Static Load rg. t. ngle apacity Grams Newtons 2,93 3,3 4,,299,,

25 -ET & G-ET SERIES STINLESS STEEL FEMLE RO ENS orrosion Resistant Precision Self Lubricating Fax ody - -4 P stainless steel (MS 342) heat treated. all stainless steel (MS 30), heat treated, hard chrome ushing - -4 P stainless steel, heat treated, PTFE lined. hand units have identification groove near end of shank ±.0 K ±.0 J ±.0 all ia Misalign. Static Load rg. t. UNF-2 ngle apacity -ET -ET -ET -ET -ET -ET G-ET G-ET G-ET G-ET G-ET G-ET /-24 3/-24 /- /2- /- 3/4- RO EN NO. IMENSIONS IN INES -ET -ET -ET -ET -ET -ET G-ET.93 G-ET 9.2 G-ET. G-ET.00 G-ET G-ET ±.3 K ±.2 J ±.2 all ia /-24 3/-24 /- /2- /- 3/4- IMENSIONS IN MILLIMETERS ,4, 9,30,0,9 2,49 Misalign. Static Load rg. t. ngle apacity Grams UNF-2 Newtons RO EN NO. 2,93 3,3 4,,299,,

26 SM & S SERIES MLE RO ENS Fax orrosion Resistant Precision (PTFE Liners vailable) ody - arbon steel, Electroless nickel Race - Stainless steel, heat treated. all - lloy steel, heat treated, hard chrome Notes - ll sizes available with studs upon request. Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department. RO EN NO. IMENSIONS IN INES ±.00 ±.0 ±.0 all ia UNF-3 SM-3 SM-4 SM- SM- SM- SM- SM- SM- S-3 S-4 S- S- S- S- S- S /4-2 /-24 3/-24 /- /2- /- 3/4- RO EN NO. 2 Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: SM-Z F Flush type fitting Ex: SM-F T PTFE liner Ex: SM-T IMENSIONS IN MILLIMETERS ±. +.3 ±.2 all ia UNF-3 SM-3 SM-4 SM- SM- SM- SM- SM- SM- S-3 S-4 S- S- S- S- S- S /4-2 /-24 3/-24 /- /2- /- 3/4- Misalign. Static Load rg. t. ngle apacity,9.03 2,.04 2,4.0 3,9. 4,.,0.2,34.3,.0 Misalign. Static Load rg. t. ngle apacity Grams Newtons,9 9,00,3,4,9 3 29,24 32,2 3,23 3

27 S & SG SERIES FEMLE RO ENS orrosion Resistant Precision (PTFE Liners vailable) Fax ody - arbon steel, Electroless nickel Race - Stainless steel, heat treated. all - lloy steel, heat treated, hard chrome Notes - ll sizes available with studs upon request. hand units have identification groove near end of shank. Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: S-Z F Flush type fitting Ex: S-F T PTFE liner Ex: S-T ±.00 ±.0 ±.0 K ±.0 J ±.0 all ia S-3 S-4 S- S- S- S- S- S- SG-3 SG-4 SG- SG- SG- SG- SG- SG Misalign. Static Load rg. t. UNF-2 ngle apacity -32,3.04 /4-2 2,39.0 /-24 3,3.09 3/-24 3,9. /- 4,. /2-,0. /-,34.4 3/4-,.2 RO EN NO. IMENSIONS IN INES ±. ±.3 ±.2 K ±.2 J ±.2 all ia Misalign. Static Load rg. t. UNF-2 ngle apacity Grams Newtons S-3 S-4 S- S- S- S- S- S- SG-3 SG-4 SG- SG- SG- SG- SG- SG /4-2 /-24 3/-24 /- /2- /- 3/4- RO EN NO. IMENSIONS IN MILLIMETERS,0,29,934,4,9 29,24 32,2,

28 SM-E & S-E SERIES STINLESS STEEL MLE RO ENS Fax orrosion Resistant Precision (PTFE Liners vailable) ody - -4 P stainless steel (MS 43), heat treated. Race - -4 P stainless steel (MS 43), heat treated. all stainless steel (MS 30), heat treated, hard chrome RO EN NO. IMENSIONS IN INES ±.00 ±.0 ±.0 all ia UNF-3 SM-3E SM-4E SM-E SM-E SM-E SM-E SM-E SM-E SM-E S-3E S-4E S-E S-E S-E S-E S-E S-E S-E /4-2 /-24 3/-24 /- /2- /- 3/4- /4- RO EN NO. 2 Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: SM-EZ F Flush type fitting Ex: SM-EF T PTFE liner Ex: SM-ET Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department. Tolerance variation: ±.0, ±.0, ±.0 2 Tolerance variation: ±., ±., ±.2 2 IMENSIONS IN MILLIMETERS ±. ±.3 ±.2 all ia UNF-3 SM-3E SM-4E SM-E SM-E SM-E SM-E SM-E SM-E SM-E S-3E S-4E S-E S-E S-E S-E S-E S-E S-E /4-2 /-24 3/-24 /- /2- /- 3/4- /4- Misalign. Static Load rg. t. ngle apacity 2, ,0.04,929.0,.,934.,.2,.3,4.0 2, Misalign. Static Load rg. t. ngle apacity Grams Newtons 9,,00 2,32 32, 3,290 3,,09 3 9, ,4,09

29 S-E & SG-E SERIES STINLESS STEEL FEMLE RO ENS orrosion Resistant Precision (PTFE Liners vailable) Race - -4 P stainless steel (MS 43), heat treated. all stainless steel (MS 30), heat treated, hard chrome Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: S-EZ F Flush type fitting Ex: S-EF T PTFE liner Ex: S-ET hand units have identification groove near end of shank Tolerance variation: ±.0, ±.0, ±. 0, J ±.0, K ±.0 2 Tolerance variation: ±., ±., ±. 2, J ±.3, K ±.3 3 Notes and 2 both have UNF-2 threads ±.00 ±.0 ±.0 K ±.0 J ±.0 all ia S-3E S-4E S-E S-E S-E S-E S-E S-E S-E SG-3E SG-4E SG-E SG-E SG-E SG-E SG-E SG-E SG-E Misalign. Static Load rg. t. UNF-3 ngle apacity -32 2,9.04 /4-2 4,9.0 /-24, /-24,. /-,934. /2-,. /-,.4 3/4-,4.2 /4-,3 2. RO EN NO. IMENSIONS IN INES ±. ±.3 ±.2 K ±.2 J ±.2 all ia Misalign. Static Load rg. t. UNF-3 ngle apacity Grams Newtons S-3E S-4E S-E S-E S-E S-E S-E S-E S-E SG-3E SG-4E SG-E SG-E SG-E SG-E SG-E SG-E SG-E /4-2 /-24 3/-24 /- /2- /- 3/4- /4- RO EN NO. 2 IMENSIONS IN MILLIMETERS,,32 2,32 32, 3,290,,09 9,3 2, Fax ody - -4 P stainless steel (MS 43), heat treated. 29

30 Fax RO EN STUS. NOTES: Stud configuration is shown as a 2-piece male, but is also available in 2-piece female, most 3-piece male and female configurations, and the I, MI, and SI spherical bearing configurations. Studs are specifically not available in the XM and OM series. 2. Grease fittings are not available on the M-3S, M-4S, M-S, or -3S rod ends. Units are supplied without grease fittings. hen grease fittings are required, specify by adding suffix Z or F. (ex.: M-SZ) 3. The standard grease fitting location (right hand location) is configured with the stud facing away from you while holding the rod end. If fitting must be oriented on the opposite side of the rod end, specify the left hand location. 4. The ultimate radial static load capacity is based on the shear strength of the stud.. UN-2. Stud sizes 3 through are normally stocked, size 2 and are available on special order. Rod ends with studs installed are normally only stocked in the M/ series male rod ends, and /G female rod ends. Studs are installed in rod ends of other series on a special order basis. IMENSIONS IN INES STU SIZE L ±.0 N ±.0 M ex Size M/ VM/V, 3 - Piece Series M/-ET Total Total Series Total Static Load Misalign. UNF-2 Misalign. Misalign. apacity ngle ngle ngle.0-32 N/ N/ N/ N/ ,0 3 39, , , ,4 0- N/ N/ 42,

31 JM NUTS Inch and Metric Fax NOTES: hand threaded jam nuts are zinc plated clear and left hand threaded jam nuts are zinc plated yellow. JM NUT NO. JM NUT NO. IMENSIONS IN INES UNF-2 F G JNR-02 JNR-042 JNR-024 JNR-024 JNR-0 JNR-0 JNR- JNR- JNR- JNR- JNR- JNR- JNR-24 JNR-32 JNL-02 JNL-042 JNL-024 JNL-024 JNL-0 JNL-0 JNL- JNL- JNL- JNL- JNL- JNL- JNL-24 JNL IMENSIONS IN MILLIMETERS - F G JNR-M JNR-M JNRF-M JNR-M JNRF-M JNR-M JNRF-M JNR-M JNRF-M JNR-M JNRF-M JNR-M JNRF-M JNR-M JNR-M2 JNR-M30 JNL-M JNL-M JNLF-M JNL-M JNLF-M JNL-M JNLF-M JNL-M JNLF-M JNL-M JNLF-M JNL-M JNLF-M JNL-M JNL-M2 JNL-M30 MX0. MX MX MX.2 MX.2 MX. MX.2 MX. MX. MX2.0 MX. MX2.0 MX. MX2. M24X2.0 M30X

32 RO EN LINKGES djustable or Fixed enters Fax eyond rod ends and spherical bearings for installation into customer components, urora earing also manufactures linkages on a special order basis. Linkages can be combined with male or female rod ends and the appropriate connector, resulting in linkages with adjustable centers, or the appropriate rod end or spherical insert can be incorporated into a fixed length linkage. Linkages are not normally stocked, and minimum order quantities are required. Virtually all urora products, in inch or metric series, can be incorporated in these custom engineered products. ontact urora sales for further information. 32

33 METRI RO ENS General Purpose Economy M-M & -M SERIES MLE RO ENS Z Zerk type fitting - M-MZ (Not available for 3,,, & ). all - lloy steel, heat treated, hard chrome -M & G-M SERIES FEMLE RO ENS Z Zerk type fitting - -MZ (Not available for 3 & ) heck for availability. See page 4. X esignates metric threads. MLE RO EN NO. IMENSIONS IN MILLIMETERS ±. ±.40 all ia. ± 0 M-M3 M-M M-M M-M M-M M-M M-M M-M M-M M-M -M3 -M -M -M -M -M -M -M -M -M M3 X 0. M X 0. M X M X.2 M X. M X. M X 2.0 M X 2.0 M X. M X. Misalign. Static Load rg. t. ngle apacity Grams a a3 a4 Newtons ,,,29,9,024 2,9 3,2 3,39 4,903, METRI hand units have identification groove near end of shank. Fax ody - arbon steel, protective coated for corrosion resistance. FEMLE RO EN NO. IMENSIONS IN MILLIMETERS ±. ±.40 K ±.2 J ±.2 all ia. ± 0 -M3 -M -M -M -M -M -M -M -M -M G-M3 G-M G-M G-M G-M G-M G-M G-M G-M G-M M3 X 0. M X 0. M X M X.2 M X. M X. M X 2.0 M X 2.0 M X. M X. Misalign. Static Load rg. t. ngle apacity Grams a a3 a4 Newtons ,4,24,9,90,0 2,9 3,2 3,39 4,903,

34 MM-M & M-M SERIES MLE RO ENS - METRI METRI Fax General Purpose Precision (PTFE Liners vailable) ody - arbon steel, protective coated for corrosion resistance. Race - arbon steel, protective coated for corrosion resistance. all - lloy steel, heat treated, hard chrome Grease fitting not available on this size. Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: MM-MZ F Flush type fitting Ex: MM-MF T PTFE Liner Ex: MM-MT Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department. heck for availability. See page 4. X esignates metric threads. Tolerance variation: ±., ±. RO EN NO. 34 MM-M3 MM-M MM-M MMF-M MM-M MMF-M MM-M MMF-M MM-M MMF-M MM-M MMF-M MM-M MM-M MMF-M MM-M MM-M MM-M2 MM-M30 IMENSIONS IN MILLIMETERS ±. ±. ±.40 ±.3 all ia. ± 0 M-M3 M-M M-M MF-M M-M MF-M M-M MF-M M-M MF-M M-M MF-M M-M M-M MF-M M-M M-M M-M2 M-M M3 X 0. M X 0. M X M X M X.2 M X.2 M X. M X.2 M X. M X. M X 2.0 M X. M X 2.0 M X. M X. M X 2. M X. M24 X 2.0 M30 X 2.0 Misalign. Static Load rg. t. ngle apacity Grams a a3 a4 Newtons ,,,29 3,9 3,9 0,03 0,03 49, 49, 49 29, , ,3 2 32,3 49 4, ,92 4 0,92 4,23 4 4,43 4, ,090

35 M-M & MG-M SERIES FEMLE RO ENS - METRI General Purpose Precision (PTFE Liners vailable) Fax ody - arbon steel, protective coated for corrosion resistance. Race - arbon steel, protective coated for corrosion resistance. all - lloy steel, heat treated, hard chrome Grease fitting not available on this size. Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: M-MZ F Flush type fitting Ex: M-MF T PTFE Liner Ex: M-MT RO EN NO. M-M3 M-M M-M MF-M M-M MF-M M-M MF-M M-M MF-M M-M MF-M M-M M-M MF-M M-M M-M M-M2 M-M30 IMENSIONS IN MILLIMETERS ±. ±. ±.40 ±.3 K ±.2 J ±.2 all ia. ± 0 MG-M3 MG-M MG-M MGF-M MG-M MGF-M MG-M MGF-M MG-M MGF-M MG-M MGF-M MG-M MG-M MGF-M MG-M MG-M MG-M2 MG-M M3 X 0. M X 0. M X M X M X.2 M X.2 M X. M X.2 M X. M X. M X 2.0 M X. M X 2.0 M X. M X. M X 2. M X. M24 X 2.0 M30 X 2.0 METRI heck for availability. See page 4. X esignates metric threads. hand units have identification groove. Tolerance variation: ±., ±. Misalign. Static Load rg. t. ngle apacity Grams a a3 a4 Newtons ,92,090,3,02,02,03,03,, 29,40 29,40 32,3 32,3 4,303 0,92 0,92,23 4,43,

36 KM-M & K-M SERIES MLE RO ENS - METRI METRI Fax ear Resistant Precision ody - arbon steel, protective coated for corrosion resistance. Race - lloy steel, heat treated, protective coated for corrosion resistance. all - lloy steel, heat treated, hard chrome RO EN NO. 3 Grease fitting not available on this size. Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: KM-MZ F Flush type fitting Ex: KM-MF Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department. heck for availability. See page 4. X esignates metric threads. Tolerance variation: ±., ±. KM-M3 KM-M KM-M KMF-M KM-M KMF-M KM-M KMF-M KM-M KMF-M KM-M KMF-M KM-M KM-M KMF-M KM-M KM-M KM-M2 KM-M30 IMENSIONS IN MILLIMETERS ±. ±. ±.40 ±.3 all ia. ± 0 K-M3 K-M K-M KF-M K-M KF-M K-M KF-M K-M KF-M K-M KF-M K-M K-M KF-M K-M K-M K-M2 K-M Misalign. Static Load rg. t. ngle apacity Grams a a3 a4 Newtons M3 X 0. M X 0. M X M X M X.2 M X.2 M X. M X.2 M X. M X. M X 2.0 M X. 23 M X M X. M X. M X 2. M X. M24 X M30 X ,,,29 3,9 3,9 0,03 0,03 49, 49, 49 29, , ,3 2 32,3 49 4, ,92 4 0,92 4,23 4 4,43 4, ,090

37 K-M & KG-M SERIES FEMLE RO ENS - METRI ear Resistant Precision Fax ody - arbon steel, protective coated for corrosion resistance. Race - lloy steel, heat treated, protective coated for corrosion resistance. all - lloy steel, heat treated, hard chrome Grease fitting not available on this size. Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: K-MZ F Flush type fitting Ex: K-MF RO EN NO. K-M3 KG-M3 K-M KG-M K-M KG-M KF-M KGF-M K-M KG-M KF-M KGF-M K-M KG-M KF-M KGF-M K-M KG-M KF-M KGF-M K-M KG-M KF-M KGF-M K-M KG-M K-M KG-M KF-M KGF-M K-M KG-M K-M KG-M K-M2 KG-M2 K-M30 KG-M30 IMENSIONS IN MILLIMETERS ±. ±. ±.40 ±.3 K ±.2 J ±.2 all ia. ± METRI heck for availability. See page 4. X esignates metric threads. hand units have identification groove. Tolerance variation: ±., ±. Misalign. Static Load rg. t. ngle apacity Grams a a3 a4 Newtons M3 X 0. M X 0. M X M X M X.2 M X.2 M X. M X.2 M X. M X. M X 2.0 M X. 23 M X M X. M X. M X 2. M X. M24 X M30 X ,92,090,3,02,02,03,03,, 29,40 29,40 32,3 32,3 4,303 0,92 0,92,23 4,43,

38 M-M & -M SERIES MLE RO ENS - METRI Fax igh Strength lloy Precision (PTFE Liners vailable) ody - lloy steel, heat treated, protective coated for corrosion resistance. Race - lloy steel, heat treated, protective coated for corrosion resistance. all - lloy steel, heat treated, hard chrome Grease fitting not available on this size. Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: M-MZ F Flush type fitting Ex: M-MF T PTFE Liner Ex: M-MT METRI heck for availability. See page 4. X esignates metric threads. Tolerance variation: ±., ±. RO EN NO. 3 IMENSIONS IN MILLIMETERS ±. ±. ±.40 ±.3 all ia. ± 0 M-M3 M-M M-M MF-M M-M MF-M M-M MF-M M-M MF-M M-M MF-M M-M M-M MF-M M-M M-M M-M2 M-M30 -M3 -M -M F-M -M F-M -M F-M -M F-M -M F-M -M -M F-M -M -M -M2 -M Misalign. Static Load rg. t. ngle apacity Grams a a3 a4 Newtons M3 X 0. M X 0. M X M X M X.2 M X.2 M X. M X.2 M X. M X. M X 2.0 M X. 23 M X M X. M X. M X 2. M X. M24 X M30 X ,344,,,, 0, 0, 44,490 44,490,4,4,29,29 0,3 0,2 0,2,099,0 29, ,090

39 -M & G-M SERIES FEMLE RO ENS - METRI igh Strength lloy Precision (PTFE Liners vailable) Fax ody - lloy steel, heat treated, protective coated for corrosion resistance. Race - lloy steel, heat treated, protective coated for corrosion resistance. all - lloy steel, heat treated, hard chrome RO EN NO. -M3 -M -M F-M -M F-M -M F-M -M F-M -M F-M -M -M F-M -M -M -M2 -M30 Grease fitting not available on this size. Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: -MZ F Flush type fitting Ex: -MF T PTFE Liner Ex: -MT IMENSIONS IN MILLIMETERS ±. ±. ±.40 ±.3 K ±.2 J ±.2 all ia. ± 0 G-M3 G-M G-M GF-M G-M GF-M G-M GF-M G-M GF-M G-M GF-M G-M G-M GF-M G-M G-M G-M2 G-M M3 X 0. M X 0. M X M X M X.2 M X.2 M X. M X.2 M X. M X. M X 2.0 M X. M X 2.0 M X. M X. M X 2. M X. M24 X 2.0 M30 X 2.0 METRI heck for availability. See page 4. hand units have identification groove near end of shank X esignates metric threads. Tolerance variation: ±., ±. Misalign. Static Load rg. t. ngle apacity Grams a a3 a4 Newtons ,34,39 2,,3,3 0, 0, 44,490 44,490,4,4,29,29 0,3 0,2 0,2,099,0 29,

40 OM-M SERIES SPERIL ERINGS - METRI Fax (PTFE Liners vailable) Outer Member arbon steel, protective coated for corrosion resistance. Race - arbon steel, I.. protective coated for corrosion resistance. METRI all - lloy steel, heat treated, hard chrome heck for availability. PTFE Liners use suffix T Ex: OM-MT. PTFE lined parts do not have lubrication groove in race. 2 ased upon maximum permanent set of.% of ball O.. (See page 4) IMENSIONS IN MILLIMETERS ERING NO. 40 OM-M3 OM-M OM-M OM-M OM-M OM-M OM-M OM-M OM-M OM-M OM-M OM-M2 OM-M ±. ±. O Flat ia M hamfer all ia Misalign. ngle Static Limit Load apacity Newtons2,, 3,49 9, 2,44,29,4,343 2,,0 3,2 390,0 2,30 rg. t. Grams

41 OM & OM SERIES SPERIL ERINGS (PTFE Liners vailable) all - lloy steel, heat treated, hard chrome ore tolerance on these items is as follows IN: +.002, -.000; METRI: +.04, -.0 PTFE Liners use suffix T Ex: OM-T 2 PTFE Lined parts have no lubrication groove in race. ole manufactures option. IMENSIONS IN INES ERING NO. Misalign. ngle Static Limit Load apacity rg. t ±.00 ±.00 O Flat ia M hamfer all ia OM-3 OM-4 OM- OM- OM- OM- OM-9 OM- OM- OM- OM ,20 4,90,4,400 9,43,20,30, 3,9 4,90, OM- OM-9 OM- OM-24 OM-2 OM , 0,30 0,30,90,30 2, Misalign. ngle Static Limit Load apacity Newtons rg. t. Grams IMENSIONS IN MILLIMETERS ERING NO ±. ±. O Flat ia M hamfer all ia OM-3 OM-4 OM- OM- OM- OM- OM-9 OM- OM- OM- OM ,44,0 2,00 3,3 42,04,934 3,9 94,,92,39 24, OM- OM-9 OM- OM-24 OM-2 OM ,0 44,049 44,049 04, 4,49 9, ,9 Fax Race - arbon steel, I.. protective coated for corrosion resistance. 4

42 OM-K & OM-K SERIES SPERIL ERINGS (PTFE Liners vailable) Race - lloy steel, heat treated, I.. protective coated for corrosion resistance. Fax all - lloy steel, heat treated, hard chrome heck for availability PTFE Liners use suffix T Ex: OM-TK 2 PTFE Lined parts have no lubrication groove in race. ole manufactures option. ore tolerance on these items is as follows IN: +.002, -.000; METRI: +.04, ±.00 ±.00 O Flat ia M hamfer all ia OM-K OM-K OM-K OM-K Static Limit Load apacity 4,,42 9,,00,0 9, 24,94 3,9 4,0 2,940 2, ,230,09,09 3,92 24, 32,90 IMENSIONS IN INES ERING NO. OM-3K OM-4K OM-K OM-K OM-K OM-K OM-9K OM-K OM-9K OM-K OM-24K OM-2K OM-32K ±. ±. O Flat ia M hamfer all ia OM-K OM-K OM-K OM-K Static Limit Load apacity Newtons,0,0 43,,042 3,03,402,9,992 2,9 9,93 3, , 2,0 2,0 90,0,,4,44, IMENSIONS IN MILLIMETERS ERING NO. OM-3K OM-4K OM-K OM-K OM-K OM-K OM-9K 42 Misalign. ngle OM-K OM-9K OM-K OM-24K OM-2K OM-32K Misalign. ngle rg. t rg. t. Grams ,9

43 OM-E SERIES SPERIL ERINGS (PTFE Liners vailable) all stainless steel (MS 30), heat treated, chrome PTFE Liners use suffix T Ex: OM-ET 2 PTFE Lined parts have no lubrication groove in race. ole manufactures option. heck for availability on all sizes. IMENSIONS IN INES ERING NO. OM-3E OM-4E OM-E OM-E OM-E OM-E OM-9E OM-E OM-E OM-E OM-E ±.00 ±.00 O Flat ia M hamfer all ia IMENSIONS IN MILLIMETERS ERING NO. OM-3E OM-4E OM-E OM-E OM-E OM-E OM-9E OM-E OM-E OM-E OM-E ±. ±. O Flat ia M hamfer all ia Misalign. ngle Misalign. ngle Static Limit Load apacity 4,,42 9,,00,0 9, 24,94 2,43 4,0 2,940 2,00 Static Limit Load apacity Newtons,0,0 43,,042 3,03,402,9,492 2,9 9,93 3,30 Fax Race - -4 P stainless steel (MS 43), heat treated. rg. t rg. t. Grams

44 LOM SERIES LRGE SIZE SPERIL ERINGS Fax (PTFE Liners vailable) Outer Member - arbon steel, protective coated for corrosion resistance. Race - arbon steel, exposed surfaces after installation protective coated for corrosion resistance. all - lloy steel, heat treated, hard chrome TESE ERINGS NOT PTFE Liners use suffix T Ex: LOM-T 2 PTFE Lined parts have no lubrication groove in race. NORMLLY STOKE EK FOR VILILITY. IMENSIONS IN INES ERING NO. LOM-3 LOM-4 LOM- LOM- LOM- LOM- LOM- LOM- LOM-- LOM- LOM-9 LOM-24 LOM ±.00 ±.00 O Flat ia M hamfer all ia IMENSIONS IN MILLIMETERS ERING NO. 44 LOM-3 LOM-4 LOM- LOM- LOM- LOM- LOM- LOM- LOM-- LOM- LOM-9 LOM-24 LOM ±. ±. O Flat ia M hamfer all ia Misalign. ngle. Misalign. ngle. Static Limit Load apacity 3,03,,2,,94 9,902 32,9 0,90 3,04,20 0,000,000,0 Static Limit Load apacity Newtons,09 24,99 34,0 4,92 3,,24,09 0,90 0,3 2,440 3,40,000 00,2 rg. t rg. t. Grams ,00,0

45 I, SI, N MI SERIES Spherical earings (PTFE Liners vailable) Race all MI lloy steel, heat treated, hard chrome arbon steel, I.. protective coated for corrosion resistance, oil coated. I lloy steel, heat treated, hard chrome lloy steel, heat treated, I.. protective coated for corrosion resistance, oil coated. SI lloy steel, heat treated, hard chrome Stainless steel, heat treated, oil coated. ore Tolerance on these items is as follows IN: +.003, -.000; METRI: +.09, -.0 PTFE Liners use suffix T Ex: I-T 2 PTFE Lined parts have no lubrication groove in race. ole manufactures option. IMENSIONS IN INES ERING NO. I-3 I-4 I- I- I- I- I- I- I- I- SI-3 MI-3 SI-4 MI-4 SI- MI- SI- MI- SI- MI- SI- MI- SI- MI- SI- MI- SI- MI- SI- MI ± O Flat ia. M hamfer all ia. Misalign. ngle IMENSIONS IN MILLIMETERS ERING NO. I-3 I-4 I- I- I- I- I- I- I- I- SI-3 MI-3 SI-4 MI-4 SI- MI- SI- MI- SI- MI- SI- MI- SI- MI- SI- MI- SI- MI- SI- MI ± O Flat ia. M hamfer all ia. Misalign. ngle Static Limit Load apacity MI I-SI 4,30,,00,,94,40 2,290 32,44 39,3 0,000,,430,900,,29 2, 3,93 4,2,3 90,000 Static Limit Load apacity Newtons MI I-SI 9,43 24,99 3,23,939 3, 3,3,490 4,329,3 2,0 29, 3,49,39,9 94,02,0,3 2,493,9 400,3 Fax Series rg. t rg. t. Grams

46 SPERIL PLIN ERINGS Inch Open & Sealed GEZ..ES GEZ..ES-2RS Fax OPEN SELE Race - steel, heat treated, protective coated for corrosion resistance. all - steel, heat treated, protective coated for corrosion resistance. GEZ..ES GEZ..ES-2RS OPEN SELE RIL STTI LO PITY These loads are the maximum safe operating loads for stationary applications, and assumes a sufficiently rigid housing and shaft. The radial static load capacity provides a. factor of safety against static fracture. LURITION earings should only be used as delivered for static applications. For dynamic applications, a lithium-based grease with EP and MOS2 additives is especially suitable. Lubricants of this type are recommended for operating temperatures between -40 F and + 20 F (-40 and + ). For operating temperatures outside of this range, consult lubricant manufacturer. earings should be adequately lubricated before installation, and relubricated at suitable intervals based on application demands. emand factors include load and load direction, misalignment angle and frequency, ambient temperature and contamination level. ERING NO. OPEN 4 GEZ00ES GEZ0ES GEZ0ES GEZ0ES GEZ0ES GEZ0ES GEZ0ES GEZ024ES GEZ02ES GEZ032ES GEZ03ES GEZ040ES GEZ044ES GEZ04ES GEZ02ES GEZ0ES GEZ00ES GEZ04ES GEZ0ES GEZ02ES GEZ0ES GEZ00ES GEZ09ES SELE GEZ0ES-2RS GEZ0ES-2RS GEZ0ES-2RS GEZ0ES-2RS GEZ0ES-2RS GEZ024ES-2RS GEZ02ES-2RS GEZ032ES-2RS GEZ03ES-2RS GEZ040ES-2RS GEZ044ES-2RS GEZ04ES-2RS GEZ02ES-2RS GEZ0ES-2RS GEZ00ES-2RS GEZ04ES-2RS GEZ0ES-2RS GEZ02ES-2RS GEZ0ES-2RS GEZ00ES-2RS GEZ09ES-2RS IMENSIONS IN INES ore ia Race ia all idth Race idth O Flat ia all mfr M Race mfr Static Misalign. Limit Load rg. t. ngle apacity 9,2.0,3.0,3. 2,0.9 3,3.,44. 9,. 4,300.93,4.4 0, 2.0 9, ,2 4.0,000.34,0.3 39,4.42 4,9. 30,2.4 9,.4 4, ,3. 43, ,9 29.,,90 3.

47 SPERIL PLIN ERINGS Metric Open & Sealed GE..ES GE..ES-2RS OPEN SELE all - steel, heat treated, protective coated for corrosion resistance. GE..ES GE..ES-2RS OPEN SELE RIL STTI LO PITY These loads are the maximum safe operating loads for stationary applications, and assumes a sufficiently rigid housing and shaft. The radial static load capacity provides a. factor of safety against static fracture LURITION earings should only be used as delivered for static applications. For dynamic applications, a lithium-based grease with EP and MOS2 additives is especially suitable. Lubricants of this type are recommended for operating temperatures between -40 F and + 20 F (-40 and + ). For operating temperatures outside of this range, consult lubricant manufacturer. GE-E only available without lube grooves and holes. ouble fracture ERING NO. OPEN GEE GEES GEES GEES GE2ES GE30ES GE3ES GE40ES GE4ES GE0ES GE0ES GE0ES GE0ES GE90ES GE0ES GEES GE0ES GE0ES GE0ES SELE IMENSIONS IN MILLIMETERS ore ia. Race ia GEES-2RS GEES-2RS GEES-2RS GE2ES-2RS GE30ES-2RS GE3ES-2RS GE40ES-2RS GE4ES-2RS GE0ES-2RS GE0ES-2RS GE0ES-2RS GE0ES-2RS GE90ES-2RS GE0ES-2RS GEES-2RS GE0ES-2RS GE0ES-2RS GE0ES-2RS all idth Race idth O Flat ia all mfr M Race mfr Static Misalign. Limit Load ngle apacity kn ,0,0 2,000 2,440 3,030 3,0 4,0,3,00 METRI earings should be adequately lubricated before installation, and relubricated at suitable intervals based on application demands. emand factors include load and load direction, misalignment angle and frequency, ambient temperature and contamination level. Fax Race - steel, heat treated, protective coated for corrosion resistance. rg. t. Grams ,040,0 2,3 2,0 4,40 4,,00,0,0 4

48 SPERIL PLIN ERINGS Inch Sealed PTFE Lined GEZ..ET-2RS Fax SELE Race - steel, heat treated, single fracture, PTFE lined. all - steel, heat treated, hard chrome RIL STTI LO PITY These loads are the maximum safe operating loads for stationary applications, and assumes a sufficiently rigid housing and shaft. The radial static load capacity provides a. factor of safety against static fracture. LURITION Self lubricating PTFE liner. ERING NO. SELE 4 GEZ0ET-2RS GEZ0ET-2RS GEZ0ET-2RS GEZ0ET-2RS GEZ0ET-2RS GEZ024ET-2RS GEZ02ET-2RS GEZ032ET-2RS GEZ03ET-2RS GEZ040ET-2RS GEZ044ET-2RS GEZ04ET-2RS GEZ02ET-2RS GEZ0ET-2RS GEZ00ET-2RS GEZ04ET-2RS GEZ0ET-2RS GEZ02ET-2RS GEZ0ET-2RS GEZ00ET-2RS GEZ09ET-2RS IMENSIONS IN INES ore ia Race ia all idth Race idth O Flat ia all mfr M Race mfr Static Limit Misalign. Load rg. t. ngle apacity,2.,.9 3,42.,9. 9,. 2,.93,2.4 0, 2.0 9, , , , , ,2. 32, ,.4,4.4 4,3., ,40 29.,,92 3.

49 SPERIL PLIN ERINGS Metric Sealed PTFE Lined GE..ET-2RS SELE all - steel, heat treated, hard chrome RIL STTI LO PITY These loads are the maximum safe operating loads for stationary applications, and assumes a sufficiently rigid housing and shaft. The radial static load capacity provides a. factor of safety against static fracture. Fax Race - steel, heat treated, single fracture, PTFE lined. METRI LURITION Self lubricating PTFE liner. Parts 0mm and above have a double fracture race. ERING NO. SELE GEET-2RS GEET-2RS GEET-2RS GE2ET-2RS GE30ET-2RS GE3ET-2RS GE40ET-2RS GE4ET-2RS GE0ET-2RS GE0ET-2RS GE0ET-2RS GE0ET-2RS GE90ET-2RS GE0ET-2RS GEET-2RS GE0ET-2RS GE0XT-2RS GE0XT-2RS IMENSIONS IN MILLIMETERS ore ia. Race ia all idth Race idth O Flat ia all mfr M Race mfr Static Limit Misalign. Load rg. t. ngle apacity Grams kn ,040 0,0,0 2,3,30 2,0,30 4,40,0 4, 2,00,00 3,000,0 3,00,0 49

50 SPERIL PLIN ERINGS eavy uty Inch Open & Sealed GEGZ..ES GEGZ..ES-2RS OPEN SELE Fax Race - steel, heat treated, protective coated for corrosion resistance. all - steel, heat treated, protective coated for corrosion resistance. GEGZ..ES GEGZ..ES-2RS OPEN SELE RIL STTI LO PITY These loads are the maximum safe operating loads for stationary applications, and assumes a sufficiently rigid housing and shaft. The radial static load capacity provides a. factor of safety against static fracture. LURITION earings should only be used as delivered for static applications. For dynamic applications, a lithium-based grease with EP and MOS2 additives is especially suitable. Lubricants of this type are recommended for operating temperatures between -40 F and + 20 F (-40 and + ). For operating temperatures outside of this range, consult lubricant manufacturer. earings should be adequately lubricated before installation, and relubricated at suitable intervals based on application demands. emand factors include load and load direction, misalignment angle and frequency, ambient temperature and contamination level. ERING NO. OPEN 0 GEGZ0ES GEGZ024ES GEGZ02ES GEGZ032ES GEGZ03ES GEGZ040ES GEGZ044ES GEGZ04ES GEGZ02ES GEGZ0ES GEGZ00ES GEGZ04ES GEGZ02ES GEGZ0ES SELE IMENSIONS IN INES ore ia. GEGZ0ES-2RS 0 GEGZ024ES-2RS GEGZ02ES-2RS GEGZ032ES-2RS GEGZ03ES-2RS GEGZ040ES-2RS GEGZ044ES-2RS GEGZ04ES-2RS GEGZ02ES-2RS GEGZ0ES-2RS 30 GEGZ00ES-2RS 30 GEGZ04ES-2RS GEGZ02ES-2RS 40 GEGZ0ES-2RS Race ia all idth Race idth O Flat ia all mfr M Race mfr. Static Misalign. Limit Load ngle apacity 4,300,4 0, 9,00 23,2,000,0 39,4 4,92 30,2 9, 4,3 932,9 9,,90 rg. t

51 SPERIL PLIN ERINGS eavy uty Metric Open & Sealed GEG..ES GEG..ES-2RS OPEN SELE all - steel, heat treated, protective coated for corrosion resistance. GEG..ES GEG..ES-2RS OPEN SELE RIL STTI LO PITY These loads are the maximum safe operating loads for stationary applications, and assumes a sufficiently rigid housing and shaft. The radial static load capacity provides a. factor of safety against static fracture earings should be adequately lubricated before installation, and relubricated at suitable intervals based on application demands. emand factors include load and load direction, misalignment angle and frequency, ambient temperature and contamination level. ERING NO. OPEN GEGE GEGES GEGES GEGES GEG2ES GEG30ES GEG3ES GEG40ES GEG4ES GEG0ES GEG0ES GEG0ES GEG0ES GEG90ES GEG0ES GEGES GEG0ES GEG0ES GEG0ES SELE IMENSIONS IN MILLIMETERS ore ia. Race ia. all idth GEGES-2RS GEGES-2RS GEGES-2RS GEG2ES-2RS GEG30ES-2RS GEG3ES-2RS GEG40ES-2RS GEG4ES-2RS GEG0ES-2RS GEG0ES-2RS GEG0ES-2RS GEG0ES-2RS GEG90ES-2RS GEG0ES-2RS GEGES-2RS GEG0ES-2RS GEG0ES-2RS GEG0ES-2RS Race idth O Flat all ia. mfr M Race mfr Static Misalign. Limit Load ngle apacity kn ,0,0 2,000 2,440 3,030 3,0 4,0,30,00,0 METRI LURITION earings should only be used as delivered for static applications. For dynamic applications, a lithium-based grease with EP and MOS2 additives is especially suitable. Lubricants of this type are recommended for operating temperatures between -40 F and + 20 F (-40 and + ). For operating temperatures outside of this range, consult lubricant manufacturer. Fax Race - steel, heat treated, protective coated for corrosion resistance. rg. t. Grams ,4 2,090 3,0 3,,00,040 9,40,0,900 24,00

52 SPERIL PLIN ERINGS Extended idth all Inch Open & Sealed GEZ..ES GEZ..ES-2RS Fax OPEN SELE Race - steel, heat treated, protective coated for corrosion resistance. all - steel, heat treated, protective coated for corrosion resistance. GEZ..ES GEZ..ES-2RS OPEN SELE RIL STTI LO PITY These loads are the maximum safe operating loads for stationary applications, and assumes a sufficiently rigid housing and shaft. The radial static load capacity provides a. factor of safety against static fracture. LURITION earings should only be used as delivered for static applications. For dynamic applications, a lithium-based grease with EP and MOS2 additives is especially suitable. Lubricants of this type are recommended for operating temperatures between -40 F and + 20 F (-40 and + ). For operating temperatures outside of this range, consult lubricant manufacturer. earings should be adequately lubricated before installation, and relubricated at suitable intervals based on application demands. emand factors include load and load direction, misalignment angle and frequency, ambient temperature and contamination level. ERING NO. OPEN 2 GEZ00ES GEZ0ES GEZ0ES GEZ0ES GEZ0ES GEZ0ES GEZ0ES GEZ024ES GEZ02ES GEZ032ES GEZ03ES GEZ040ES GEZ044ES GEZ04ES GEZ02ES GEZ0ES GEZ00ES GEZ04ES GEZ02ES GEZ00ES GEZ09ES SELE IMENSIONS IN INES ore ia. GEZ00ES-2RS 0 GEZ0ES-2RS.20 GEZ0ES-2RS 0 GEZ0ES-2RS 0 GEZ0ES-2RS 0 GEZ0ES-2RS 0 GEZ0ES-2RS 0 GEZ024ES-2RS GEZ02ES-2RS GEZ032ES-2RS GEZ03ES-2RS GEZ040ES-2RS GEZ044ES-2RS GEZ04ES-2RS GEZ02ES-2RS GEZ0ES-2RS 30 GEZ00ES-2RS 30 GEZ04ES-2RS GEZ02ES-2RS 40 GEZ00ES-2RS.0000 GEZ09ES-2RS Race ia all idth Race idth O Flat ia all mfr M Race mfr Static Misalign. Limit Load ngle apacity 9,2,,3 2,0 3,3,44 9, 4,300,4 0, 9,00 23,2,000,0 39,4 4,92 30,2 9, 4,3 932,9,,90 rg. t

53 SPERIL PLIN ERINGS Extended idth all Metric Open & Sealed GEE..ES GEE..ES-2RS OPEN SELE all - steel, heat treated, protective coated for corrosion resistance. RIL STTI LO PITY These loads are the maximum safe operating loads for stationary applications, and assumes a sufficiently rigid housing and shaft. The radial static load capacity provides a. factor of safety against static fracture LURITION earings should only be used as delivered for static applications. For dynamic applications, a lithium-based grease with EP and MOS2 additives is especially suitable. Lubricants of this type are recommended for operating temperatures between -40 F and + 20 F (-40 and + ). For operating temperatures outside of this range, consult lubricant manufacturer. Fax Race - steel, heat treated, protective coated for corrosion resistance. earings should be adequately lubricated before installation, and relubricated at suitable intervals based on application demands. emand factors include load and load direction, misalignment angle and frequency, ambient temperature and contamination level. OPEN GEEES GEEES GEEES GEEES GEEES GEE2ES GEE30ES GEE32ES GEE3ES GEE40ES GEE4ES GEE0ES GEE0ES GEE3ES GEE0ES GEE0ES GEE90ES GEE0ES GEEES GEEES GEE0ES GEE0ES GEE20ES GEE3ES SELE IMENSIONS IN MILLIMETERS ore ia. Race ia GEEES-2RS GEEES-2RS GEEES-2RS GEEES-2RS GEE2ES-2RS GEE30ES-2RS GEE32ES-2RS GEE3ES-2RS GEE40ES-2RS GEE4ES-2RS GEE0ES-2RS GEE0ES-2RS GEE3ES-2RS GEE0ES-2RS GEE0ES-2RS GEE90ES-2RS GEE0ES-2RS GEEES-2RS GEEES-2RS GEE0ES-2RS GEE0ES-2RS GEE20ES-2RS GEE3ES-2RS all idth Race idth O Flat ia all mfr M Race mfr Static Misalign. Limit Load ngle apacity kn ,0 4, 4,0 4 2, , , ,0 4 4,0 4,00 4,00 4, ,00 rg. t. Grams METRI ERING NO ,,0,90 2,0 3,040 4,0,30,90,00 3,00,000,000 3

54 NGULR ONTT SPERIL PLIN ERINGS Inch GZ..S Fax OPEN Race - steel, heat treated, protective coated for corrosion resistance all - steel, heat treated, protective coated for corrosion resistance. LURITION earings should only be used as delivered for static applications. For dynamic applications, a lithium-based grease with EP and MOS2 additives is especially suitable. Lubricants of this type are recommended for operating temperatures between -40 F and + 20 F (-40 and + ). For operating temperatures outside of this range, consult lubricant manufacturer. earings should be adequately lubricated before installation, and relubricated at suitable intervals based on application demands. emand factors include load and load direction, misalignment angle and frequency, ambient temperature and contamination level. ERING NO. OPEN 4 GZ00S GZ0S GZ0S GZ0S GZ0S GZ0S GZ0S GZ024S GZ02S GZ032S GZ03S GZ040S GZ044S GZ04S GZ02S GZ0S GZ00S GZ04S GZ02S GZ00S GZ09S IMENSIONS IN INES ore ia Race ia all idth Race idth T Static Thrust,M S Misalign. Load rg. t. Spherical Loc. End to all, Race ia. mfr. ngle apacity Sphere ole ia , , , , , , , , , , , , , , , , , , , , ,

55 NGULR ONTT SPERIL PLIN ERINGS Metric G..S OPEN all - steel, heat treated, protective coated for corrosion resistance. LURITION earings should only be used as delivered for static applications. For dynamic applications, a lithium-based grease with EP and MOS2 additives is especially suitable. Lubricants of this type are recommended for operating temperatures between -40 F and + 20 F (-40 and + ). For operating temperatures outside of this range, consult lubricant manufacturer. earings should be adequately lubricated before installation, and relubricated at suitable intervals based on application demands. emand factors include load and load direction, misalignment angle and frequency, ambient temperature and contamination level. ERING NO. IMENSIONS IN MILLIMETERS ore ia. G2S G2S G30S G32S G3S G40S G4S G0S GS G0S GS G0S GS G0S GS G90S G9S G0S GS GS G0S G0S G0S G0S G0S G0S G0S G90S G0S Race ia all idth Race idth T Spherical ia S Loc. Sphere ia METRI OPEN Static Thrust,M Misalign. Load rg. t. End to all, Race mfr. ngle apacity Grams ole kn ,030,040.0.,9, ,290, ,4, ,0 2, ,0 2,0.00..,923 2, , 2, ,3 3, ,3 3, ,0, ,40, ,0, ,0 9, ,90, ,90, ,00, ,4 23,00 Fax Race - steel, heat treated, protective coated for corrosion resistance.

56 NGULR ONTT SPERIL PLIN ERINGS Metric PTFE Lined Fax G..T Race - steel, heat treated, PTFE lined. all - steel, heat treated, hard chrome LURITION Self lubricating PTFE liner. ERING NO. METRI OPEN G2T G2T G30T G32T G3T G40T G4T G0T GT G0T GT G0T GT G0T GT G90T G9T G0T GT GT G0T G0T G0T G0T G0T G0T G0T G90T G0T IMENSIONS IN MILLIMETERS ore ia Race ia all idth Race idth T Spherical ia S Loc. Sphere ia Static Thrust,M Misalign. Load rg. t. all, Race mfr. ngle apacity Grams kn , ,0. 3.,0,40. 2,240,. 3.,30 2,090. 2,30 2,0..,0 2, ,0 2, ,0 3, ,390 3, ,,9 2. 3,0, ,30, ,240 9,90 3.0,0, ,0, ,0,0 3.0.,30 23,00

57 FRTURE RE ERINGS INTERNGE GUIE lso known as a split race bearings or light series bearings These types of bearings are first and foremost intended for static situations where potential misalignments exist that can not be accommodated by plane bushings or clevises and pins. hile these bearings are most commonly used in applications with heavy static loads with initial or assembly misalignment, they are also used for dynamic applications with slow dynamic misalignment, either pivotal, rotational, or combination. For dynamic applications subject to regular misalignment, a full swage bearing such as the OM series is recommended. Fax U = pproximate bore in inches. (ex. =., =. ) V = elow, ore in /. bove bore in whole inch + fraction in / (ex. = /2, = /2 ) = ore is nearest metric equivalent for inch size. (ex. =.,. =. mm.) X = ore in /. (ex. = /2, /2 = / ) Y = ore in mm. (ex. = mm.) Y= O in mm. Y= ore in mm. + bore of next size part offered (ex. 2 = mm. bore, 2mm is bore of next larger size part offered) Table to be used as a reference guide. interchangeability should be determined by comparing relevant manufacturers specifications. These are just some of the bearing styles and configurations offered by urora. dditional configurations include special sizes, PTFE liners,stainless Steel, very large bore parts, and more. Please consult factory for further information, specifications, and interchanges to part numbers/manufacturers not listed.

58 SUGGESTE OUSING ORES Spherical Plain earings ISO - Fit recommended for light loads where axial displacement is required after installation. ISO M - Press fit where bearing is subjected to combination, reversing, or shock loads. ISO N - Recommended fit when using a light alloy housing (i.e. aluminum). EXTR EVY PRESS FIT - Recommended fit for applications with extreme shock loads that can also tolerate elevated breakaway torques. sufficiently rigid housing is assumed. Tables are representative of Metal to Metal parts, please consult our engineering department regarding PTFE lined parts. For GEG, GEGZ, GE, GEZ, G, GZ series, consult factory Fax IMENSIONS IN INES ERING SERIES Suggested ousing ore For Press Fit of Spherical Plain earings GEZ..ES GEZ..ES..2RS earing Outside iameter ISO ISO N ISO M Extra eavy Press Fit IMENSIONS IN MILLIMETERS ERING SERIES GE..ES GE..ES..2RS Suggested ousing ore For Press Fit of Spherical Plain earings earing Outside iameter ISO ISO N ISO M Extra eavy Press Fit

59 SUGGESTE OUSING ORES OM, OM, MI, I & SI Spherical earings imensions given in the tables below are for bearings fabricated of standard race materials. Should other materials be used, consult our engineering department for modification of these dimensions. IMENSIONS IN INES ERING SERIES Suggested ousing ore For Press Fit of Spherical earings earing Outside iameter OM OM Steel ousing luminum ousing IMENSIONS IN MILLIMETERS ERING SERIES OM OM Suggested ousing ore For Press Fit of Spherical earings earing Outside iameter Steel ousing luminum ousing Tables are representative of Metal to Metal parts, please consult our engineering department regarding PTFE lined parts. MI, I & SI Series IMENSIONS IN INES ERING SERIES Suggested ousing ore For Press Fit of Spherical earings MI I SI earing Outside iameter Steel ousing Fax OM & OM Series luminum ousing IMENSIONS IN MILLIMETERS ERING SERIES Suggested ousing ore For Press Fit of Spherical earings MI I SI earing Outside iameter Steel ousing luminum ousing

60 SUGGESTE OUSING ORES Fax LOM & OM-M Spherical earings These tables are representative of Metal to Metal parts, please consult our engineering department regarding PTFE lined parts. LOM SERIES OM-M SERIES IMENSIONS IN INES ERING SERIES LOM IMENSIONS IN INES Suggested ousing ore For Press Fit of Spherical earings earing Outside iameter Steel ousing luminum ousing ERING SERIES OM-M Suggested ousing ore For Press Fit of Metric Spherical earings earing Outside iameter IMENSIONS IN MILLIMETERS ERING SERIES LOM Steel ousing luminum ousing luminum ousing IMENSIONS IN MILLIMETERS Suggested ousing ore For Press Fit of Spherical earings earing Outside iameter Steel ousing ERING SERIES OM-M Suggested ousing ore For Press Fit of Metric Spherical earings earing Outside iameter Steel ousing luminum ousing

61 SERIES all earing, Self-aligning Rod Ends Fax OUSING MTERIL UTILE IRON onsult our Engineering epartment for load ratings and RPM information. IMENSIONS IN INES Shaft ia. Unit No. E F G J K O /2 / 3/ /4 3/4 /.2 / / /2 2 / 2 / 2 /4 / / 23/32 /4 /4 3/32 / / / / / 3/4 / / 3/4 3/4 3/4 /.9.9. rg. t. Size 3/32 /2- UNF 3/32 /2- UNF 3/32 /2- UN.3.3. heck for availability. IMENSIONS IN MILLIMETERS Shaft ia. Unit No. E F G J K O Size /2 / 3/ /2- UNF /2- UNF /2- UN rg. t

62 XM & X SERIES MLE RO ENS Fax Extra Strength eavy uty Shank (PTFE Liners vailable) ody - arbon steel, protective coated for corrosion resistance. Race - lloy steel, heat treated protective coated for corrosion resistance. (arbon steel with PTFE liners.) all - lloy steel, heat treated, hard chrome Notes - ll sizes available with studs upon request. Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department. RO EN NO. IMENSIONS IN INES ±.00 ±.0 ±.0 all ia UNF-3 XM-3 XM-4 XM- XM- XM- XM- XM- XM- XM-- XM-- X-3 X-4 X- X- X- X- X- X- X-- X /4-2 /-24 3/-24 /- /2- /- 3/4- /- 3/4- /- RO EN NO. 2 Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: XM-Z F Flush type fitting Ex: XM-F T PTFE Liner Ex: XM-T IMENSIONS IN MILLIMETERS ±. ±.3 ±.2 all ia UNF-3 XM-3 XM-4 XM- XM- XM- XM- XM- XM- XM-- XM-- X-3 X-4 X- X- X- X- X- X- X-- X /4-2 /-24 3/-24 /- /2- /- 3/4- /- 3/4- /- Misalign. Static Load rg. t. apacity ngle 2,.04 3,4.0,323.,0. 9,.2,0.3,.0,03.92,03.92,03.92 Misalign. Static Load rg. t. ngle apacity Grams Newtons 9,00,42 23,2 3, ,94,93 3 3,3 3,424 4,424 4,424 4

63 XM & X SERIES MLE RO ENS igh Strength lloy eavy uty Shank (PTFE Liners vailable) Fax ody - lloy steel, heat treated, protective coated for corrosion resistance. Race - lloy steel, heat treated protective coated for corrosion resistance. (arbon steel with PTFE liners.) all - lloy steel, heat treated, hard chrome Notes - ll sizes available with studs upon request. Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: XM-Z F Flush type fitting Ex: XM-F T PTFE Liner Ex: XM-T Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department. RO EN NO. IMENSIONS IN INES ±.00 ±.0 ±.0 all ia UNF-3 XM-3 XM-4 XM- XM- XM- XM- XM- XM- X-3 X-4 X- X- X- X- X- X /4-2 /-24 3/-24 /- /2- /- 3/4- /- RO EN NO. IMENSIONS IN MILLIMETERS ±. ±.3 ±.2 all ia UNF-3 XM-3 XM-4 XM- XM- XM- XM- XM- XM- X-3 X-4 X- X- X- X- X- X /4-2 /-24 3/-24 /- /2- /- 3/4- /- Misalign. Static Load rg. t. ngle apacity,.04,42.0,9.,0. 23,42.2 3, ,2.0,92.92 Misalign. Static Load rg. t. ngle apacity Grams Newtons 23,39 3,9,2,0 3 4,3 9,2 3 0,4 3 24, 4 3

64 RM, R, RXM, RX SERIES MLE RO ENS Fax igh Strength lloy (PTFE Liners vailable) RM RXM ody - lloy steel, heat treated, nickel or chrome Race - lloy steel, heat treated, nickel all - lloy steel, heat treated, hard chrome heck for availability s UNF-3 PTFE Liners use suffix T Ex: RM-T RM EVY UTY RO EN NO. RM-3 R-3 RM-4 R-4 RM- R- RM- R- RM- R- RM- R- RM- R- RM-- R-- RM- R- IMENSIONS IN INES ±.00 ± all ia UNJF /4-2 /-24 3/-24 /- /2- /- 3/4-3/4- Misalign. Static Load rg. t. ngle apacity 2,.03,.04,.0,939. 9,3.,00.2,.3,0.0,0.0 RXM EXTR EVY UTY RO EN NO. 4 IMENSIONS IN INES ±.00 ± all ia UNJF-3 RXM-3 RXM-4 RXM- RXM- RXM- RXM- RXM- RX-3 RX-4 RX- RX- RX- RX- RX /4-2 /-24 3/-24 /- /2- /- 3/4- Misalign. Static Load rg. t. ngle apacity,.04,42.0,9.,0.,0.2 30,9.3 39,4.0

65 IG MISLIGNMENT SERIES MLE RO ENS & SPERIL ERINGS XM-T Fax ody steel, heat treated, protective coated for corrosion resistance. Race - 40 steel, heat treated, protective coated for corrosion resistance. -T, -TG all - lloy steel, heat treated, hard chrome PTFE liner - (T 30) Permanently bonded to race inside diameter. Qualified to SES (formerly MIL-) XM-T RO EN NO. IMENSIONS IN INES ±.00 ±.0 ±.0 all ia. ±.03 UNJF-3 XM-4T XM-T XM-T XM-T XM-T XM-T XM-T X-4T X-T X-T X-T X-T X-T X-T /-24 /- /- /2- /- 3/4- /- O Misalign. Static Load rg. t. Shoulder ngle apacity ia ,9..,..,.., , , ,0.9 -T ERING NO. IMENSIONS IN INES Grooved Plain ±.00 M O P -.0 S G -.00 R all ia. -4TG -TG -TG -TG -TG -TG -TG -TG -4T -T -T -T -T -T -T -T Static Limit Misalign. rg. t. Load ngle apacity ,0,9,9 9,0 2,23 44, 3,0 2,

66 PERFORMNE RING SERIES Fax PRM-T & PRXM-T Series Male Rod Ends - PTFE Lined PRM-T ody steel, heat treated, protective coated for corrosion resistance. Race - Stainless steel (-4 P per MS 43), heat treated PRXM-T all - lloy steel, heat treated, hard chrome Manufacturers option: 440 stainless steel, heat treated. PTFE liner - (T 30) Permanently bonded to race inside diameter. Qualified to SE-S (formerly MIL--) PRM-T - PERFORMNE RING SERIES RO EN NO. IMENSIONS IN INES ±.00 ±.0 ±.0 all ia. ±.03 PRM-T PRM-T PRM-T PRM-T PRM-T PRM-T PR-T PR-T PR-T PR-T PR-T PR-T No Load Rotational Misalign. Static Load reakaway rg. t. UNJF-3 apacity Torque ngle In- /-24, /-24,94 -. /-, /2-9 23,3 -.2 /- 2, /4-34, PRXM-T - PERFORMNE RING - EVY UTY SNK SERIES RO EN NO. IMENSIONS IN INES ±.00 ±.0 ±.0 all ia. ±.03 PRXM-4T PRXM-T PRXM-T PRXM-T PRXM-T PRXM-T PRX-4T PRX-T PRX-T PRX-T PRX-T PRX-T No Load Rotational Misalign. Static Load reakaway rg. t. UNJF-3 apacity Torque ngle In- /-24, / , -. /-,94 -. /2-, /- 9 23, /4-2,

67 PERFORMNE RING SERIES PN-TG & PN-T Series, P-TG & P-T Series Spherical earings - PTFE Lined GROOVE SERIES PLIN SERIES Race - -4 P stainless steel (MS 43), heat treated PTFE Liner - (T 30) Permanently bonded to race inside diameter. Qualified to SE-S (formerly MIL--) Fax all - lloy steel, heat treated, hard chrome Manufacturers option: 440 stainless steel, heat treated. PN-TG & PN-T - PERFORMNE RING SPERIL NRRO SERIES ERING NO. Grooved Plain PN-3TG PN-4TG PN-TG PN-TG PN-TG PN-TG PN-9TG PN-TG PN-TG PN-3T PN-4T PN-T PN-T PN-T PN-T PN-9T PN-T PN-T IMENSIONS IN INES ±.00 O P -.0 S G -.00 R Static Limit Load No Load Rotational all Misalign. reakaway rg. t. xial ia. ngle Torque In , , , ,40, ,0, ,900 2, ,0 3, ,00 4, ,400, P-TG & P-T - PERFORMNE RING SPERIL IE SERIES ERING NO. Grooved Plain P-3TG P-4TG P-TG P-TG P-TG P-TG P-9TG P-TG P-TG P-3T P-4T P-T P-T P-T P-T P-9T P-T P-T IMENSIONS IN INES ±.00 O P -.0 S G -.00 R Static Limit Load No Load Rotational all Misalign. reakaway rg. t. xial ia. ngle Torque In.-.3 2,00, ,00, ,400, ,00 2, ,00 3, ,400 4, ,00, ,000, ,000,

68 LM & L SERIES XLM & XL MLE RO ENS Fax (PTFE Liners vailable) LM XLM ody - luminum 0T, hard anodized. Race - arbon steel, protective coated for corrosion resistance. all - lloy steel, heat treated, hard chrome PTFE Liners use suffix T Ex: XLM-T s are /2- UNJF-3. LM - LUMINUM SERIES RO EN NO. IMENSIONS IN INES ±.00 ±.0 ±.0 all ia UNF-3 LM- LM- LM- L- L- L /2- /- 3/4- Misalign. Static Load rg. t. ngle apacity,9.,.24,39.3 XLM - LUMINUM SERIES RO EN NO. XLM- XL- XLM- XL- IMENSIONS IN INES ±.00 ±.0 ±.0 all ia UNF /- 3/4- Misalign. Static Load rg. t. ngle apacity,9. 9,243.3

69 MILITRY SPEIFITION ERINGS General Information urora earing ompany's reputation for designing and producing high quality commercial rod ends and spherical bearings has grown extensively since the inception of the organization. urora earing has rapidly expanded its various product lines and now serves virtually every major industrial market. ecause of the special skills developed by our engineering and manufacturing personnel in the commercial bearing markets, our recognized expertise attracted the attention of the military specification bearing market, which includes the aircraft/aerospace industry. Frequently, our engineers have been onsequently, urora earing ompany decided to aggressively enter the military specification bearing marketplace. e now offer six standard lines that are presented in the following pages. Please note that the bearings listed utilize T 30, urora's exclusive PTFE bearing liner fully qualified to SE-S (formerly MIL--). The bearings are manufactured to conform to the dimensions, materials and configurations of the appropriate individual military bearing specification. They are fully qualified and approved for procurement under these specifications. In addition, urora also has two standard lines of bearings in the general aviation field. onsult urora earing engineering for additional information. Sales engineers specializing in the aviation field are available to discuss your particular application needs. Fax In all of these markets, urora earing has consistently demonstrated its reputation for furnishing a reliable product. s a result, more and more firms sought help from our engineers and manufacturing specialists to solve difficult applications problems in high performance equipment. For example, urora earing was a pioneer in developing a special line of rod ends for the high temperature turbine engine industry. called upon to develop custom-designed units for sophisticated aerospace applications. In some instances, our standard commercial series of commercial rod ends and spherical bearings were more than adequate for aircraft/aerospace usage. 9

70 SM-T & S-T MLE RO ENS Fax igh Strength erospace Series SE-S93/ ( ) & SE-S93/ ( ) ody lloy steel (MS-S-000), heat treated, cadmium all stainless steel (MS 30), heat treated. Race - -4 P stainless steel (MS 43), heat treated. Liner - T 30 bearing liner, permanently bonded to race I.., qualified to SES. TLE I RO EN NO. SM-3T SM-4T SM-T SM-T SM-T SM-T SM-T SM-T SM-T SM-T IMENSIONS IN INES ±.0 ±.0 O S ousing I.. all ia. G -.0 K P -.00 ±.03 S-3T.900 S-4T.200 S-T.3 S-T.30 S-T S-T 0 S-T.20 S-T 0 S-T 0 S-T Misalign. rg. t. ngle UNJF-3 /-24 /-24 /-24 3/-24 /- /2- /- 3/4- /- / TLE II Temperature Range: - F to + 32 F No load rotational breakaway torque can be varied to meet specific application requirements. dd Letter K to prefix to designate keyway, Ex. : SMK-T. s applicable, keyway will conform to SE-S93/3 or NS 9. ll threads are rolled after heat treatment, and conform to UNJF-3 per S 9. T 30 earing Liner System is qualified for procurement under SE-S. Rod End earings listed are manufactured to conform to the dimensions, materials and configurations of SE-S93/, and are approved for procurement under this specification. onsult factory for additional information. 0 RO EN NO. SM-3T SM-4T SM-T SM-T SM-T SM-T SM-T SM-T SM-T SM-T S-3T S-4T S-T S-T S-T S-T S-T S-T S-T S-T Static Load 2,30 4,0,0,0,000 9,00,900 29,300 34,00 0,300 Fatigue Load xial Proof Load,40 2,30 2,0 3,0 4,00,0 9,0,00,0 30,400,000,000,0,0,0 2,040 2,430 2, 3,3 4,340 No Load Rotational reakaway Torque In

71 S-T & SG-T FEMLE RO ENS igh Strength erospace Series SE-S93/2 ( ) & SE-S93/2 ( ) Fax Radius ody lloy steel (MS-S-000), heat treated, cadmium all stainless steel (MS 30), heat treated. Race - -4 P stainless steel (MS 43), heat treated. Liner - T 30 bearing liner, permanently bonded to race I.., qualified to SE-S. TLE I RO EN NO. IMENSIONS IN INES 0 ±.00 ±.0 ± S-3T SG-3T S-4T SG-4T S-T SG-T S-T SG-T S-T SG-T S-T SG-T S-T SG-T S-T SG-T S-T SG-T S-T SG-T S O E ousing ±.0 I.. K ia. J F all ia. P Misalign. rg. t. ngle UNJF /-24 /-24 3/-24 3/-24 /- /2- /- 3/4- /- / TLE II RO EN NO. S-3T S-4T S-T S-T S-T S-T S-T S-T S-T S-T SG-3T SG-4T SG-T SG-T SG-T SG-T SG-T SG-T SG-T SG-T Static Load 2,30 4,0,0,0,000 9,00,900 29,300 34,00 0,300 Fatigue Load xial Proof Load,40 2,30 3,0 3,0 4,00, 9,0,00,0 30,400,000,000,0,0,0 2,040 2,430 2, 3,3 4,340 No Load Rotational reakaway Torque In Temperature Range: - F to + 32 F No load rotational breakaway torque can be varied to meet specific application requirements. dd Letter K to prefix to designate keyway, Ex. : SK-T. s applicable, keyway will conform to SE-S93/3 or NS 9. ll threads conform to UNJF-3 per S 9. T 30 earing Liner System is qualified for procurement under SE-S. Rod End earings listed are manufactured to conform to the dimensions, materials and configurations of SE-S93/2, and are approved for procurement under this specification. onsult factory for additional information.

72 N-T & N-TG SPERIL ERINGS Narrow erospace Series SE-S and SE-S4 PLIN SERIES Fax GROOVE SERIES all stainless steel (MS 30), heat treated. Race - -4 P stainless steel (MS 43), heat treated. Liner - T 30 bearing liner, permanently bonded to race I.., qualified to SES. Temperature Range: - F to + 32 F No load rotational breakaway torque can be varied to meet specific application requirements. T 30 earing Liner System is qualified for procurement under SE-S. earings listed are manufactured to conform to the dimensions, materials and configurations of Military Specifications SE-S (grooved) and SE-S4 (plain), and are approved for procurement under this specification. onsult factory for additional information. ERING NO. 2 IMENSIONS IN INES Grooved Plain ±.00 O P -.0 S G -.00 R all ia. N-3TG N-4TG N-TG N-TG N-TG N-TG N-9TG N-TG N-TG N-TG N-TG N-3T N-4T N-T N-T N-T N-T N-9T N-T N-T N-T N-T Static Limit Load Oscillat -ing xial Load 9 9 3,9,040,0,40,0,900 23,0 30,00 4,400 2,0 2, ,0,400 2,0 3,0 4,,0 9,30,0,00 3,3,40,00,00,400,000,40 23,00 30,20 3,000 No Load Rotational rg. reakaway t. Torque Lb In

73 -T & -TG SPERIL ERINGS ide erospace Series SE-S2 and SE-S3 GROOVE SERIES PLIN SERIES Fax all stainless steel (MS 30), heat treated. Race - -4 P stainless steel (MS 43), heat treated. Liner - T 30 bearing liner, permanently bonded to race I.., qualified to SES. Temperature Range: - F to + 32 F No load rotational breakaway torque can be varied to meet specific application requirements. T 30 earing Liner System is qualified for procurement under SE-S. earings listed are manufactured to conform to the dimensions, materials and configurations of Military Specifications SE-S3 (grooved) and SES2 (plain), and are approved for procurement under this specification. onsult factory for additional information. ERING NO. Grooved Plain -3TG -4TG -TG -TG -TG -TG -9TG -TG -TG -TG -TG IMENSIONS IN INES T.900-4T.200 -T.3 -T.30 -T -T 0-9T.2 -T.20 -T 0 -T 0 -T ±.00 O P -.0 S G -.00 R all ia Static Limit Load Oscillat -ing xial Load 9 2,00,00 9,400,00,00,400 2,00 29,000 3,000,0 4,000,0,0,40 2,30 3,0 4,90,30,0,30,00 9,300 4,900 4,900,00,3,0,90,0,20 2,0,00,20 No Load Rotational rg. reakaway t. Torque Lb In

74 GMM-M & GM-M SERIES MLE RO ENS General viation Precision Fax ETIL ETIL ody - arbon steel, protective coated for corrosion resistance. Race - arbon steel, protective coated for corrosion resistance. all - lloy steel, heat treated, hard chrome Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please contact our engineering department. Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: GMM-3MZ-40 F Flush type fitting Ex: GMM-3MF-40 ERING NO. 4 GMM-3M-40 GMM-3M-0 GMM-3M-0 GMM-3M-0 GMM-4M-40 GMM-4M- GMM-4M-0 GM-3M-40 GM-3M-0 GM-3M-0 GM-3M-0 GM-4M-40 GM-4M- GM-4M-0 Notes - Units are magnetic particle inspected after assembly. IMENSIONS IN INES all Shoulder +.00 onfiguration ±.00 ±.0 O all ±.0 Shoulder ia. ia. See etail See etail See etail See etail See etail See etail See etail Static F rg. t. Misalign. Load rilled ngle apacity ole UNF-3 ia ref.99 /4-2 2,.0. /-24 2, /-24 2, /-24 3, /4-2 2,.0. 3/-24 3,0..9 3/-24. 2,9.

75 GM-M & GMG-M SERIES FEMLE RO ENS General viation Precision ETIL Fax ETIL ody - arbon steel, protective coated for corrosion resistance. Race - arbon steel, protective coated for corrosion resistance. all - lloy steel, heat treated, hard chrome hand units identification groove near end of shank. Notes - Units are magnetic particle inspected after assembly. Units are supplied without grease fittings. hen a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: GM-3MZ-40 F Flush type fitting Ex: GM-3MF-40 Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department. ERING NO. GM-3M-40 GM-3M-4 GM-3M-40 GM-3M-0 GM-4M-40 GM-4M-9 GMG-3M-40 GMG-3M-4 GMG-3M-40 GMG-3M-0 GMG-4M-40 GMG-4M-9 IMENSIONS IN INES all J N all K O Shoulder +.00 ±.00 ±.0 ±.0 ±.0 ±.0 ±.00 Shoulder ia. ia. onfiguration See etail See etail See etail See etail See etail See etail Misalign. Static rg. t. Load +.02 UNF- ngle apacity /4-2 2,.0 /4-2 2,.0 /4-2 3,2.0 /-24 2,.0 /4-2 2, /-24 3,39.

76 INSTLLTION OF SPERIL ERING Fax Figure SPERIL ERING INSTLLTION Proper installation of the bearing is important to prevent bearing failure as well as housing damage. Under no circumstances should a tool that induces shock or impact to the bearing be used. The use of an arbor press or hydraulic press is recommended. tool as shown above (Figure ) is advised. ll force is to be applied on the bearing race face (not on ball). lead chamfer or radius on the bearing and/or housing is vital. OUSING MFER - GROOVE ERINGS MFER FOR GROOVE TYPES GROOVE TYPE.0 ±.00 GROOVE TYPE.030 ±.00 GROOVE TYPE.00 ±.00 STKING GROOVE TYPES

77 INSTLLTION OF SPERIL ERING IT STKING GROOVES TOOLS N STKING METOS Figure 2 Fax SPERIL ERING INSTLLTION The bearings have grooves in each side of the bearing race face, leaving a small lip. Staking tools (as shown above in Figure 2) are then used to stake the lip over the chamfer edges of the housing. typical arrangement consists of two identical anvils and one guide pin which is secured by a set screw in the bottom anvil. PROEURES. Install bearing into housing as shown in Figure (pg. ) and position bearing symmetrical about housing centerline. 2. lign bearing with staking tool and guide pin as shown in Figure trial stake assembly should be made to determine staking force necessary to meet thrust load requirements. Proper staking force is required because excessive pressure could result in bearing distortion along with life. 4. Pressure established by trial assembly is to be applied. fter first stake is completed rotate assembly 90 and re-apply. Repeat operation through a minimum of three rotations to insure 30 uniformity of stake.. fter staking, a slight gap may exist between race lip and housing chamfer. This slight gap (shown below) may not be cause for rejection if bearing meets or exceeds thrust loads.

78 REFERENE Special Size Race ar Parts Parts commonly used in the race car industry, along with common part number references. hile not cataloged, many of these parts are stocked. heck with dealer or factory for availability. Fax urora Part # ommon Part # M-4T-9 M-T- M-T- M-T- M--2 M-T- M-T-0 M-- OM-T- OM-T- OM-T- OM-T-4 OM-T- -TG-3 XM-T- LOM-T PRXM-T- P-T-3 RXM-T-3 RM-T- RM-T-3 XM-T- XM-T-2 XM-T- XM- R04 P P NZ0 30P 43 0P YT-V LS, RS RR0/E 0P MNR0U /-24 /2- /- /2-3/4- - /- 3/4- escription / Note Solid rod eye eat treated race eat treated race Mild steel race rag Shocks 2.2 /2-2 / /4- - /4- /2-3/4- /2- /- igh Misalignment 0,43 lb. RSL 0,43 lb. RSL 2 piece. Lined:VXM- Note: imensions are for reference only, and may not fully reflect actual part specifications. heck catalog or factory for related series material specifications, tolerances, etc.

79 REFERENE Inch / Metric onversion Table Most commonly used conversions in old. IN FRT. 3/4 / /4 3/32 /4 / 9/4 /32 /4 3/ /4 /32 /4 /4 E FRT. /4 / 29/4 E / /32 9/4 / /4 /32 23/4 3/ 2/4 /32 /4 3/4 /2 /4 /32 3/4 9/ 3/4 9/32 39/4 / 4/4 /32 IN MM FRT. 43/4 / 4/4 23/32 4/4 3/4 49/4 2/32 /4 / 3/4 /32 /4 E / /4 29/32 9/4 / /4 3/32 3/4 /4 IN MM FRT /2 3/4 2 2 /4 2 /2 2 3/4 3 3 /4 3 /2 3 3/4 4 4 /4 4 /2 4 3/4 /2 MM E Fax /4 /32 IN MM IN/METRI ONVERSION FTORS Inches x 2.4 Millimeters x 3 = Inches Sq. Inches x.4 = Sq. entimeters per In.2 Sq. entimeters x. = Millimeters = Sq. Inches Pounds x.43 = Kilograms Pounds(Force)x 4.44 = Newtons Kilograms x 2.4 = Pounds Newtons x.003 = kg per cm2 Temperature onversion (pproximate) kg per cm2 x.3= per In.2 x.4 = Pounds(Force) egrees = (egrees F -32)(.) egrees F = (egrees )(.)+ 32 9

80 REFERENE Engineering Information TP RILL SIZE METRI TRES TP RILL SIZES FOR IN TRES ommercial Tap rills Fax Screw size Root ia. Size or Number ecimal Equiv /4-2 /-24 3/-24 /- /2- /2- /- /- 3/4- /- - - /4- /2-3/ I Q 2/4 /4 29/4 /32 3/4 / / 9/4 / /4 /4 /32 29/ TRE SIZE/TP METRI RILL SIZE M3 X 0. M X 0. M X M X.2 M X. M X. M X 2.0 M X 2.0 M X. M X. M X. M24 X 2.0 M30 X The tables above are to be used as guides only. onsult the appropriate reference to determine best size based on fit requirements, materials used, etc. STEEL ESIGNTION ROSS REFERENE TLE US RITIN FRNE GERMNY ITLY JPN ISI.S. FNOR IN UNI JIS 00 M X k S 00 0 M 9 2 M M M Mn G Mn 3 S SMn 3 F 9 Mn 3 SMn 4 SUM 43 SUM 23 S rmo 4 2 rmo 4 SM 4 0 M TS 4 rmo 4 4 rmo SM M 40 3 N 24 rnimo 3 NirMo SNM r 0 r SUJ S Z NF.09 X rnis 9 X rnis 09 SUS S Z 3 X r X r SUS 440 Z 0 X rmo SUS -4 Z NU.4 X rniunb SUS 0 This table is to be used as a guide to assist in finding comparable metal designations only. True interchange can be determined only by comparing chemical composition, mechanical properties, and manufacturing technologies. 0

81 REFERENE Terms Translations English French German Italian Portugese erospace érospatial luminum luminium Spanish Luftfahrt erospaziale eroespacial eroespacial luminium lluminio luminio luminio xiale xial ssiali xial xial all ague interieure Innenringe nello Interno anel intero Esfera orps Gehaeuse Testa orpo cuerpo ase to enter ody base pour centrer longueur bstand, Unterseite zur Mitte lunghezza, da base al centro distância, base ao centro altura, base a centro ore lesages ohrung foro Furo agujero Kommerziell uso generico omercial omercial ommercial hrome plate chromage verchromt cromatura Placa do cromo cromado iametre urchmesser iametro iametro iametro Female thread Filetages Femelle Innengewinde Filettatura intera Rosca Femea rosca hembra Grease Fitting Graisseur Schmiernippel Ingrassatore lubrificador lubricador iameter ead or Race idth á largeur de logement Gehaeusebreite / Lagersschalenbreite spessore testa / spessore boccola largura externa do anel anchura de la pista Industrial grade Industriel Industrie-Qualitaet qualità industriale Industrial Keyway Rainure de lavette Keilnute Scanalatura gauche Links sinistra Load capacity capacite de charges belastbar capacità di carico apacidade da carga apacidad de arga Male thread Filetages male ussengewinde maschio filettato Rosca macho Rosca macho cunero inversa Rosca izquierda Military Specification Spécifications Militaires Militär-Vorschrift Specifica Militare Especificação Militar Especificacion Militar Misalignment ribaltamento inclinacao desalineamiento angulaires Kippwinkel Race Logement Lagerschale boccola / anello esterno anel externo Pista e i Normes, roite Rechts a destra normal Rosca erecha statische Tragzahl arico Statico apacidades de carga estatica arga radial maxima Static Load apacity charge statique Rod end Embouts Gelenkkopf, pl. Gelenkkoepfe Teste a Snodo Terminais Rotulares abezas de articulación Spherical bearing Rotules Gelenklager Snodi Sferici Rotulas Rotula Esferica Stainless steel cier Inoxydable Rostfrei cciaio inox co inox cero inoxidable Steel cier Stahl cciaio co cero Filetage Gewinde Filettatura Rosca Rosca Length longueur du filetage Gewindelaenge lunghezza del filetto comprimento da rosca Longitud de Rosca idth of ball largeur bille Innenringbreite spessore anello interno largura interna do anel anchura de la esfera Fax xial guide to translate common rod end industry terms from English to noted language. This is a guide only. onsultation with appropriate language references is recommended for best accuracy.

82 UROR ERING OMPNY... EXLUSIVE: SPEILLY ESIGNE RO ENS N LINKGES Fax I Illustrated are a variety of special linkages and rod ends. Let us design specials to meet your specific applications. 2