SABIC Innovative Plastics Valox 412 PBT (Europe-Africa-Middle East)

Transcription

1 SABIC Innovative Plastics Valox 412 PBT (Europe-Africa-Middle East) Category : Polymer, Thermoplastic, Polyester, TP, Polybutylene Terephthalate (PBT) Material Notes: sales@lookpolymers.com VALOX 412 is 20% glass reinforced PBT injection moulding resin. Applications: Spotlights, appliance housings and handles. Order this product through the following link: Physical Properties Metric English Comments Specific Gravity 1.45 g/cc 1.45 g/cc ASTM D792 Density 1.45 g/cc lb/inⳠISO 1183 Filler Content 20 % 20 % ASTM D229 Moisture Absorption % % 23 / 50% RH; ISO 62 Water Absorption at Saturation 0.28 % 0.28 % ISO 62 Viscosity cp cp Melt Viscosity, 260, 1500 sec-1; ISO Linear Mold Shrinkage, Flow cm/cm in/in on Tensile Bar; SABIC Method cm/cm in/in SABIC Method Linear Mold Shrinkage, Transverse cm/cm in/in on Tensile Bar; SABIC Method Melt 3.80 kg, Temperature 8.38 lb, Temperature 392 ASTM D g/10 min 40 g/10 min Temperature 266 Temperature 511 ASTM D1238 Melt Index of 2.16 kg, Temperature 4.76 lb, Temperature g/10 min 23 g/10 min Temperature 250 Temperature g/10 min 35 g/10 min Temperature 265 Temperature 509 1/5

2 Mechanical Properties Metric English Comments Hardness, Rockwell R ISO Hardness, H358/ MPa psi ISO Tensile Strength at Break 110 MPa psi Type I, 5 mm/min; ASTM D MPa psi 5 mm/min; ISO 527 Tensile Strength, Yield 115 MPa psi Type I, 5 mm/min; ASTM D MPa psi 5 mm/min; ISO 527 Elongation at Break 3.0 % 3.0 % Type I, 5 mm/min; ASTM D % 3.0 % 5 mm/min; ISO % 5.0 % Flexural Strain, break, 2 mm/min; ISO 178 Elongation at Yield 3.0 % 3.0 % Type I, 5 mm/min; ASTM D % 3.0 % 5 mm/min; ISO 527 Tensile Modulus 7.20 GPa 1040 ksi 5 mm/min; ASTM D GPa 1040 ksi 1 mm/min; ISO 527 Flexural Strength 165 MPa psi 1.3 mm/min, 50 mm span; ASTM 170 MPa psi 2 mm/min; ISO 178 Flexural Yield Strength 165 MPa psi 1.3 mm/min, 50 mm span; ASTM 170 MPa psi 2 mm/min; ISO 178 Flexural Modulus 5.80 GPa 841 ksi 1.3 mm/min, 50 mm span; ASTM 5.90 GPa 856 ksi 2 mm/min; ISO 178 Izod Impact, Notched J/cm 1.50 ft-lb/in ASTM D J/cm ft-lb/in ASTM D256 ASTM D256 Izod Impact, Unnotched 7.30 J/cm 13.7 ft-lb/in ASTM D4812 2/5

3 Mechanical Properties 6.50 J/cm Metric 12.2 ft-lb/in English Comments ASTM D4812 Izod Impact, Notched (ISO) 7.00 kj/mⲠ3.33 ft-lb/inⲠ80*10*4; ISO 180/1A kj/mⲠft-lb/inⲠ80*10*4; ISO 180/1A 80*10*4; ISO 180/1A Izod Impact, Unnotched (ISO) 40.0 kj/mⲠ19.0 ft-lb/inⲠ80*10*4; ISO 180/1U 30.0 kj/mⲠ14.3 ft-lb/inⲠ80*10*4; ISO 180/1U Charpy Impact Unnotched 4.00 J/cm² 19.0 ft-lb/inⲠISO 179/2C 5.00 J/cm² 23.8 ft-lb/inⲠEdgew 80*10*4 sp=62mm; ISO 179/1eU 3.50 J/cm² 5.00 J/cm² 16.7 ft-lb/inⲠ23.8 ft-lb/inⲠISO 179/2C Edgew 80*10*4 sp=62mm; ISO 179/1eU Charpy Impact, Notched J/cm² 2.38 ft-lb/inⲠEdgew 80*10*4 sp=62mm; ISO 179/1eA J/cm² 3.81 ft-lb/inⲠISO 179/2C J/cm² 2.38 ft-lb/inⲠEdgew 80*10*4 sp=62mm; ISO 179/1eA J/cm² 3.81 ft-lb/inⲠISO 179/2C Dart Drop, Total Energy ASTM D3763 Electrical Properties Metric English Comments 3/5

4 Volume Electrical Resistivity Properties >= Metric 1.00e+15 ohm-cm >= English 1.00e+15 ohm-cm ASTM Comments D257 >= 1.00e+15 ohm-cm >= 1.00e+15 ohm-cm IEC Surface Resistance >= 1.00e+15 ohm >= 1.00e+15 ohm ROA; IEC Dielectric Constant Dielectric Strength 16.0 kv/mm 406 kv/in 16.0 kv/mm 406 kv/in mm in mm in mm in mm in Dissipation Factor Arc Resistance sec sec Tungsten; ASTM D495 Comparative Tracking Index 300 V 300 V IEC V V UL 746A Contact Songhan Plastic Technology Co.,Ltd. Website : 4/5

5 sales@lookpolymers.com Tel : Mobile : Skype : lookpolymers Address : United North Road 215,Fengxian District, Shanghai City,China 5/5