PLCC Lamps. Package Dimensions

Transcription

1 PLCC Lamps Features Package in 8mm tape on 7" diameter reels. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. EIA STD package. I.C. compatible. AIGaAs Red AIGaAs Red Amber Pure Package Dimensions Description The AIGaAs Red source color devices are made with Aluminum Gallium Arsenide Red Light Emitting Diode. The Orange and Amber source color devices are made with Arsenide Gallium Phosphide on Gallium Phosphide Orange Light Emitting Diode. The source color devices are made with Gallium Phoshpide on Gallium Phoshide Light Emitting Diode. The source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yelow Light Emitting Diode. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2mm(.008")unless otherwise noted. 3.,,,,,"A" identify cathode.,, "A" identify anode. Devices Lens Source Color AlGaAs Red Pure Amber -28

2 Absolute Maximum Ratings at Ta=2 Power Dissipation AlGaAs Red Pure 60 Unit mw Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) ma Continuous Forward Current 40 ma Derating Linear From ma/ Reverse oltage Operating Temperature Range - to + Storage Temperature Range - to + Infared Soldering Condition 260 for Seconds apor phase Soldering Condition 21 for 3 minutes Wave Soldering Condition 260 for Seconds Electrical / Optical Characteristics and Curves at Ta = 2 Symbol Min. Typ. Max. Unit. Test Condition. Luminous lntensity I mcd IF= ma Note 1 iewing Angle 2 1 deg Note 2 (FIG.22) Peak Emission P 660 (FIG.1) Dominant d 638 Note 3 Spectral Line Half Width Forward oltage F IF=mA Reverse Current Capacitance IR C Notes:1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eyeresponse curve is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength, d is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. A PF R= F=0 f=1mhz SMD LAMPS -29

3 Electrical / Optical Characteristics at Ta=2 Symbol Min. Typ. Max. Unit. Test Condition. Luminous lntensity I mcd IF=10 ma Note 1 iewing Angle 2 All 1 deg Note 2 (Fig.7) Peak Emission P (Fig.1) Dominant d Note 3 Spectral Line Half Width Forward oltage F IF=mA Reverse Current IR A R= Capacitance C PF F=0 f=1mhz Notes:1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eyeresponse curve is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength, d is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. -

4 Typical Electrical/Optical Characteristics Curves (2 Ambient Temperature Unless Otherwise Noted) SMD LAMPS -31

5 User Guide Cleaning Do not use unspecified chemical liquid to clean LED they could harm the package. If cleaning is necessary,immerse the LED in ethyl alcohol or isopropyl alcohol at normal temperature for less one minute. Soldering Pad Dimensions Package Dimensions of Tape / / // / Package Dimensions of Tape and Reel -32 Notes:1. Empty component pockets sealed with top cover tape inch reel pieces per reel. 3. The maximum number of consecutive missing lamp are two. 4. In accordance with ANSI/EIA RS-481 specifications the cathode is oriented towards the tape sprocket hole.. All dimensions are in millimeters (inchs).