AD 2000 Specifications

Transcription

1 AD 2000 Specifications * Equipment, installation and marketing (Series A) * Design (Series B) * Fundamentals (Series G) * Manufacturing and testing (Series HP) * Non-metallic materials (Series N) * Special cases (Series S) * Materials (Series W) * Additional notes (Series Z) Equipment, installation and marketing (Series A) AD 2000-Merkblatt A 1 Technical rule, Safety devices against excess pressure - Bursting safety devices AD 2000-Merkblatt A 2 Technical rule, Safety devices against excess pressure - Safety valves AD 2000-Merkblatt A 4 Technical rule, Accessory housings AD 2000-Merkblatt A 5 Technical rule, Openings, closures and closure elements AD 2000-Merkblatt A 5 Anlage 1 Technical rule, Directives for the arrangement of manholes and inspection ports AD 2000-Merkblatt A 5 Anlage 2 Technical rule, Guidelines for component testing of clamp-bolts AD 2000-Merkblatt A 6 Technical rule, Safety devices against excess pressure PCE-safety devices AD 2000-Merkblatt A 401 Technical rule, Pressure vessel equipment; Marking AD 2000-Merkblatt A 403 Technical rule, Pressure vessels equipment - Equipment for detecting and limiting pressure and temperature - Equipment, installation and marking of pressure vessels AD 2000-Merkblatt A 404 Technical rule, Pressure vessel equipment - Accessories - Equipment, installation and marking of pressure vessels

2 Design (Series B) AD 2000-Merkblatt B 0 Technical rule, Design of pressure vessels AD 2000-Merkblatt B 1 Technical rule, Cylindrical and sherical shells subjected to internal overpressure This document has been modified forward AD 2000-Merkblatt B 1 Anlage 1 Technical rule, Berechnung von Rohrbiegungen und Bögen AD 2000-Merkblatt B 2 Technical rule, Conical shells subjected to internal and external overpressure AD 2000-Merkblatt B 3 Technical rule, Domed ends subject to internal or external pressure AD 2000-Merkblatt B 4 Technical rule, Dished heads AD 2000-Merkblatt B 5 Technical rule, Unstayed and stayed flat ends and plates AD 2000-Merkblatt B 5/1 Technical rule, Berechnung von glatten Vierkantrohren und Teilkammern AD 2000-Merkblatt B 6 Technical rule, Cylindrical shells subjected to external overpressure AD 2000-Merkblatt B 7 Technical rule, Boltings Fundamentals (Series G) AD 2000-Merkblatt G 1 Technical rule, AD 2000-Regulations - Structure, application and method guidelines AD 2000-Merkblatt G 2 Technical rule, List of all standards quoted in the AD 2000 Code Manufacturing and testing (Series HP) AD 2000-Merkblatt HP 0 Technical rule, Genral principles of design, manufacture and associated tests AD 2000-Merkblatt HP 1 Technical rule, Design and construction

3 AD 2000-Merkblatt HP 2/1 Technical rule, Procedure qualification testing for joining processes - Procedure qualification testing for welding joints AD 2000-Merkblatt HP 3 Technical rule, Welding supervisors, welder AD 2000-Merkblatt HP 4 Technical rule, Test supervisors and testers in non-destructive testing AD 2000-Merkblatt HP 5/1 Technical rule, Manufacture and testing of joints - Principles of welding practice AD 2000-Merkblatt HP 5/2 Technical rule, Manufacture and testing of joints - Production testing of welds, testing of the parent metal after post-weld heat treatment AD 2000-Merkblatt HP 5/3 Technical rule, Manufacture and testing of joints - Non-destructive testing of welded joints AD 2000-Merkblatt HP 5/3 Anlage 1 Technical rule, Non-destructive testing of welded joints - Minimum requirements for non-destructive testing methods AD 2000-Merkblatt HP 7/1 Technical rule, Heat treatment - General principles AD 2000-Merkblatt HP 7/2 Technical rule, Heat treatment - Ferritic steels AD 2000-Merkblatt HP 7/3 Technical rule, Heat treatment - Austenitic steels AD 2000-Merkblatt HP 7/4 Technical rule, Heat treatment - Aluminium and aluminium alloys AD 2000-Merkblatt HP 8/1 Technical rule, Testing of pressings made from steel, aluminium and aluminium alloys AD 2000-Merkblatt HP 8/2 Technical rule, Testing of steel sections AD 2000-Merkblatt HP 8/3 Technical rule, Manufacture and testing of fittings made of unalloyed and alloyed steels AD 2000-Merkblatt HP 30 Technical rule, Performance of pressure tests

4 AD 2000-Merkblatt HP 100 R Technical rule, Construction regulations - Metal piping AD 2000-Merkblatt HP 110 R Technical rule, Construction regulations - Piping made of glass reinforced thermosetting plastics (GRP) with and without liner - Manufacture and testing of pressure vessels AD 2000-Merkblatt HP 120 R Technical rule, Construction regulations - Thermoplastic piping - Manufacture and testing of pressure vessels AD 2000-Merkblatt HP 511 Technical rule, Design examination AD 2000-Merkblatt HP 512 Technical rule, Final testing and pressure testing AD 2000-Merkblatt HP 512 R Technical rule, Construction regulations - Design examination, final testing and pressure testing of piping AD 2000-Merkblatt HP 801 Nr. 4 Technical rule, Special pressure vessels - Pressure vessels with gas cushions in hydraulic pressure plants AD 2000-Merkblatt HP 801 Nr. 8 Technical rule, Special pressure vessels - Pressure vessels on assembly and building sites AD 2000-Merkblatt HP 801 Nr. 10 Technical rule, Special pressure vessels - Spray pressure vessels AD 2000-Merkblatt HP 801 Nr. 11 Technical rule, Special pressure vessels - Open vessels heated by steam jackets for cooking preserves, confectionery and meat products AD 2000-Merkblatt HP 801 Nr. 13 Technical rule, Special pressure vessels - Storage containers for beverages AD 2000-Merkblatt HP 801 Nr. 14 Technical rule, Special pressure vessels - Pressure vessels in refrigerating and heatpumping plant AD 2000-Merkblatt HP 801 Nr. 15 Technical rule, Special pressure vessels - Pressure vessels subjected to pulsating stresses AD 2000-Merkblatt HP 801 Nr. 18 Technical rule, Special pressure vessels - Pressure vessels for fire extinguishers and vessels forfire-extinguishing agents

5 AD 2000-Merkblatt HP 801 Nr. 19 Technical rule, Special pressure vessels - Pressure vessels with lining or masonry lining AD 2000-Merkblatt HP 801 Nr. 23 Technical rule, Special pressure vessels - Vehicle containers for liquid, granular and powdery materials AD 2000-Merkblatt HP 801 Nr. 25 Technical rule, Special pressure vessels - Liquefied gas storage vessel installation AD 2000-Merkblatt HP 801 Nr. 26 Technical rule, Special pressure vessels - Pressure for gases or gas mixtures with operating temperatures below -10 C AD 2000-Merkblatt HP 801 Nr. 27 Technical rule, Special pressure vessels - Pressure vessels for gases and gas mixtures in the liquid state AD 2000-Merkblatt HP 801 Nr. 29 Technical rule, Special pressure vessels - Rotating steam-heated cylinders AD 2000-Merkblatt HP 801 Nr. 30 Technical rule, Special pressure vessels - Autoclaves for masonry blocks AD 2000-Merkblatt HP 801 Nr. 34 Technical rule, Special pressure vessels - Ammonia storage vessels AD 2000-Merkblatt HP 801 Nr. 37 Technical rule, Special pressure vessels - Heat transfer installations AD 2000-Merkblatt HP 801 Nr. 38 Technical rule, Special pressure vessels - Experimental autoclaves AD 2000-Merkblatt HP 801 Nr. 39 Technical rule, Special pressure vessels - Pressure vessels in isostatic presses Non-metallic materials (Series N) AD 2000-Merkblatt N 1 Technical rule, Druckbehälter aus textilglasverstärkten duroplastischen Kunststoffen (GFK) AD 2000-Merkblatt N 2 Technical rule, Pressure vessels made of electro-graphite and hard burned carbon AD 2000-Merkblatt N 4 Technical rule, Pressure vessels made of glass AD 2000-Merkblatt N 4 Anlage 1 Technical rule, Assessment of defects in walls of pressure vessels made of glass

6 Special cases (Series S) AD 2000-Merkblatt S 1 Technical rule, Simplified analysis for cyclic loading AD 2000-Merkblatt S 2 Technical rule, Analysis for cyclic loading AD 2000-Merkblatt S 3/0 Technical rule, Allgemeiner Standsicherheitsnachweis für Druckbehälter - Grundsätze AD 2000-Merkblatt S 3/1 Technical rule, General verification of stability for pressure vessels - Vessels on skirt supports AD 2000-Merkblatt S 3/2 Technical rule, General verification of stability for pressure vessels - Verification of load-carrying capacity for horizontal vessels on saddle supports AD 2000-Merkblatt S 3/3 Technical rule, General verification of stability for pressure vessels - Vessels with domed ends on feet AD 2000-Merkblatt S 3/4 Technical rule, General verification of stability for pressure vessels - Vessels with support brackets AD 2000-Merkblatt S 3/5 Technical rule, General verification of stability for pressure vessels - Vessels with ring supports AD 2000-Merkblatt S 3/6 Technical rule, General verification of stability for pressure vessels - Vessels with nozzles subject to additional loadings AD 2000-Merkblatt S 3/7 Technical rule, General verification of stability for pressure vessels - Allowing for thermal stresses in heat exchangers with solid headers AD 2000-Merkblatt S 4 Technical rule, Evaluation of stresses determined by way of calculation and experimental stress analysis AD 2000-Merkblatt S 6 Technical rule, Creep stress for steels

7 Materials (Series W) AD 2000-Merkblatt W 0 Technical rule, General principles for materials AD 2000-Merkblatt W 1 Technical rule, Flat products of unalloyed and alloy steels AD 2000-Merkblatt W 2 Technical rule, Austenitic and austenitic-ferritic steels Original language: de AD 2000-Merkblatt W 3/1 Technical rule, Cast iron with lamellar graphite (grey cast iron) non-alloy and low alloy AD 2000-Merkblatt W 3/2 Technical rule, Cast iron materials - Spheroidal-graphite cast iron non-alloy and low alloy AD 2000-Merkblatt W 3/3 Technical rule, Cast iron materials - Austenitic cast iron with lamellar graphite AD 2000-Merkblatt W 4 Technical rule, Tubes made from non-alloyed and alloy steels AD 2000-Merkblatt W 5 Technical rule, Cast steel AD 2000-Merkblatt W 6/1 Technical rule, Aluminium and aluminium alloys - Wrought materials AD 2000-Merkblatt W 6/2 Technical rule, Copper and wrought copper alloys Original language: de AD 2000-Merkblatt W 7 Technical rule, Bolts and nuts mede from ferritic steels AD 2000-Merkblatt W 8 Technical rule, Plattierte Stähle AD 2000-Merkblatt W 9 Technical rule, Steel flanges AD 2000-Merkblatt W 10 Technical rule, Werkstoffe für tiefe Temperaturen - Eisenwerkstoffe

8 AD 2000-Merkblatt W 12 Technical rule, Seamless hollow components made from non-alloyed and alloy steels for pressure vessel shells AD 2000-Merkblatt W 13 Technical rule, Forgings and rolled components made of non-alloy and alloy steels Additional notes (Series Z) AD 2000-Merkblatt Z 1 Technical rule, Guidelines for meeting the essential safety requirements of the pressure equipment - Directive when using AD 2000-Merkblätter on pressure vessels, piping and fittings AD 2000-Merkblatt Z 2 Technical rule, Guidelines for carrying out a systematic analysis of hazards