TEST REPORT Job No./Report No TR Date: 3 October Page 1 of 10

Transcription

1 TEST REPORT Job No./Report No TR Date: 3 October Page 1 of 10 URAS TEKSTIL KIMYA TURIZM SAN.VE TIC. A Ş BAĞLAR MEVKII FIDAN SOK 2 C GÜNEŞLI ISTANBUL TEL: FAX: To the attention of Gul Hanım The following sample(s) was (were) submitted and identified by/on behalf of the client as: Sample No. A B Dye in white Panel in white Sample Description Client s reference No. : TR Buyer : GOTS Order No. : Not Provided Model/Style No. : Not Provided Article No. : ECOFLEX S20 WHITE Age Grade : Not Provided Manufacturer : URAS KIMYA Country of Origin : Not Provided Country of Destination : Not Provided Shipment Date : Not Provided Fiber Composition : Not Provided Fabric Weight : Not Provided End Use : Not Provided Agency : Not Provided Sample Receiving Date : 26 September 2016 Test Performing Period : 26 September 2016 ~ 3 October 2016 Overall : PASS Test Results : Please refer to the next page(s). Performed Test Summary: Selected test(s) as requested by client against Client s performance standard.

2 TEST REPORT Job No./Report No TR Date: 3 October Page 2 of 10 Test Parameters Result Chemical tests A1 B1 Adsorbable Organic Halogens (AOX) - M ph value - M Extractable Heavy Metal - M Phthalates M - Azo Dyes Raw Material - Natural Method M - Alkylphenol Ethoxylates M - Alkylphenols M - Free Formaldehyde in Liquid and Powder Samples by Steam Distillation M - Remarks : M = Meets client s requirement F = Below client s requirement I = Inconclusive * = No specified requirement The sample was not submitted in polyethylene bag and wrapped in aluminium foil. Notes: s on meet/fail are based on the test result from the actual sampling of the received sample(s). Residual sample can be returned to client if requested.

3 TEST REPORT Job No./Report No TR Date: 3 October Page 3 of 10 The test results relate to the tested items only. Test reports without SGS seal and authorized signatures are invalid. Reported results do not include uncertainties. Issued in Istanbul Signed for and on behalf of Servisleri A.Ş. Aydın Oktay Customer Services Supervisor Arzu Yılmaz yetkilimüdür Customer Services Team Leader

4 TEST REPORT Job No./Report No TR Date: 3 October Page 4 of 10 Component List / List of Materials for Chemical Test Sample No. Sample Description Material No. Component Material Colour Fiber Type* A Dye A1 Dye Other material White N/A B panel B1 Printed Main Coating White N/A *This fiber type identification is for the selection of azo dye testing procedure(i.e. EN /3:2012) Note: Type A=Textile contains natural fibers only and/or regenerated fibers exclude the group of acetate. Type B=Textile contains polyester fibers only Type C=Textile contains man-made fibers and/or man-made blended fibers(except polyester fibers) N/A:Not Applicable

5 TEST REPORT Job No./Report No TR Date: 3 October Page 5 of 10 Azo Dyes Raw Material - Natural Method¹ With reference to BS EN :2012 Annex F- Analysis by GC-MS/HPLC-DAD Component Cas No A1 4-Aminobiphenyl Benzidine Chlor-o-toluidine Naphthylamine o-aminoazotoluene nitro-o-toluidine / 2-Amino-4-nitrotoluene Chloroaniline methoxy-m-phenylenediamine / 2,4-Diaminoanisole ,4'-Diaminodiphenylmethane ,3'-Dichlorobenzidine ,3'-Dimethoxybenzidine ,3'-Dimethylbenzidine ,4'-methylenedi-o-toluidine / 3,3'-Dimethyl-4,4'-diaminodiphenylmethane p-cresidine ,4'-Methylene-bis-(2-chloroaniline) ,4'-Oxydianiline ,4'-Thiodianiline o-toluidine methyl-m-phenylenediamine / 2,4- Toluendiamine ,4,5-Trimethylaniline aminoazobenzene O-Anisidine = not detected Detection Limit = 5 mg/kg (for individual compound) Requirement by the client= 20 mg/kg

6 TEST REPORT Job No./Report No TR Date: 3 October Page 6 of 10 Remark: # # The BS EN :2012 and ISO methods will enable further cleavage of 4-aminoazobenzene to non-forbidden amines: aniline and 1,4-phenylenediamine. If aniline and/or 1,4-phenylenediamine is not found (i.e. 5mg/kg) by mentioned test method, test result for 4-aminoazobenzene (CAS no ) is considered as not detected (i.e. <5mg/kg). Otherwise, the test method of EN :2012 / ISO will be employed to verify the presence of 4-aminoazobenzene. Whenever 4-aminodiphenyl (CAS number ), 2-naphylamine (CAS number ) and 4-methoxy-m-phenylene-diamine (CAS number ) is found, the use of banned azo colorants cannot be reliably ascertained without additional information, e.g. the chemical structure of the colorants used. In case polyurethane materials are used, e.g. PU foams and coatings and in prints, it cannot be ruled out that certain amines, e.g. 4,4 -methylene-dianiline (MDA, CAS number ) and 2,4-toluylen-diamine (TDA, CAS number ) are released from the PU component and not from a banned azo colorant. In case of pigment prints care has to be taken that 4,4 -methylene-dianiline (MDA, CAS number ) is not released from a source of banned azo colorants but from e.g. a chemical fixing agent. Alkylphenol Ethoxylates¹ Component NPEO OPEO Requirement by the client= Alkylphenols¹ Component NP OP Requirement by the client= = Detection Limit = = Detection Limit = SGS In House Test Method CTSL-SOP-RSTS-CHEM Analysis by HPLC-MS not detected 15mg/kg <20 mg/kg A1 SGS In House Test Method CTSL-SOP-RSTS-CHEM Analysis by HPLC-MS not detected 15 mg/kg <20 mg/kg A1

7 TEST REPORT Job No./Report No TR Date: 3 October Page 7 of 10 ph value¹ With reference to ISO 3071: KCI solution is used Temperature of KCl solution ( o C): 22 ± 2 o C ph (KCl): B1 ph Value 5,4 Requirement by the client= Determination of Adsorbable Organically Bound Halogens (AOX) Extraction with boiling water, adsorption on charcoal; Analysis was performed with AOX analyzer. Result CAS-No. B1 Adsorbable organic halogens (AOX) Note: = not detected mg/kg = ppm Detection limit = 2 mg/kg Client s Requirement < 5 mg/kg

8 TEST REPORT Job No./Report No TR Date: 3 October Page 8 of 10 Phthalates 1 With Reference to DIN EN 15777:2009-Analysis by GC-MS Component Cas No A1 Dibutyl Phthalate (DBP) Benzylbutyl Phthalate (BBP) Bis-(2-ethylhexyl) Phthalate (DEHP) Diisononyl Phthalate (DINP) / ( ) Di-n-octyl Phthalate (DNOP) Diisodecyl Phthalate (DIDP) Bis(2-methoxyethyl) phthalate(dmep) Diisobutyl phthalate(dibp) Free Formaldehyde¹ = Detection Limit = Requirement by the client= not detected * = exceed the limit < = less than 0,01% (DINP, DIDP,DHNUP,DIHP) 0,003% (others ) <100mg/kg With reference to BS EN ISO :2011 Textile Determination of Formaldehyde Part 1: Free and hydrolyzed formaldehyde (Water Extraction Method) - Analysis by UV/VIS spectrophotometer Calibration range: 0.15 mg/l mg/l A1 Formaldehyde Content = Detection Limit = Requirement by the client= not detected 16 mg/kg 75mg/kg

9 TEST REPORT Job No./Report No TR Date: 3 October Page 9 of 10 Extractable Heavy Metals¹ Component Antimony (Sb) Arsenic (As) Cadmium (Cd) Chromium (Cr) Chromium VI (CrVI) Cobalt (Co) Copper (Cu) Lead (Pb) Mercury (Hg) Nickel (Ni) Tin (Sn) Selenium (Se) = SGS In House Test Method CTSL-SOP-RSTS-CHEM (ISO 105 E04 for preparation of perspiration solution) - Analysis by ICP-OES/MS and UV-VIS for Cadmium B1 not detected Detection Limit = Sb: 0,2 mg/kg, As: 0,1 mg/kg, Pb:0,1 mg/kg, Cd: 0,05 mg/kg, Cr: 0,5 mg/kg, Cr VI: 0,5 mg/kg, Co: 0,5 mg/kg, Cu: 5 mg/kg, Ni: 0,5 mg/kg, Hg: 0,01 mg/kg Se:0,1 mg/kg Sn:0,1 mg/kg Requirement by the client= Sb <0,2 mg/kg As Cd Cr Cr VI Co Cu Pb Ni Hg Sn Se <0,2 mg/kg <0,1 mg/kg <1,0 mg/kg <0,5 mg/kg <1,0 mg/kg <25 mg/kg <0,2 mg/kg <1,0 mg/kg <0,02 mg/kg <2,0 mg/kg <0,2 mg/kg

10 TEST REPORT Job No./Report No TR Date: 3 October Page 10 of 10 * * * End of Test Report * * *