Global Rubber Performance. Product and Technical Guide

Transcription

1 Global Rubber Performance Product and Technical Guide

2 Release Agents 1 8 % Active Product Name Chemical Composition Ingredient Appearance / Form Bladder Coatings Rhenodiv D silicone resin dissolved in hydrocarbons 25 cloudy dispersion Rhenodiv 700/2A reactive silicone polymers in water based emulsion 12 white medium viscosity emulsion Compound Release Agents, Dry Powders & Liquids Rhenodiv D combination of silicates, inorganic fillers, soluble soaps and 100 gray powder surface active substances Rhenodiv S combination of inorganic fillers, synthetic fillers and surfactants gray powder Rhenodiv S combination of inorganic fillers, synthetic fillers and surfactants gray powder Rhenodiv D aqueous blend of fatty acid salts and calcium stearate 35 white-yellow dispersion Rhenodiv D A aqueous solution of a blend of fatty acid salt with water 28 white to yellow viscous liquid soluble high molecular weight substances Hose Release Agents Rhenodiv H 687-5A Rhenodiv D mixture of poylols and ethoxylated fatty acids yellow viscous liquid Mold Release Agents Inside Tire Lubes Outside Tire Paints Page 18 of 22: This document contains important information and must be read in its entirety.

3 Specialties 1 9 Density (g/cm3) Mooney Viscosity ML Product Name Chemical Composition (approx) (5 + 4) 100 C Appearance / Form Elastomers Urepan 600 "Polyaddition product made from 1.20 Approx. 26 light brown-beige blocks/slices toluylene diisocyanate and polyester." Urepan 640G Polyaddition product made from 1.20 Approx. 45 light brown-beige pellets diphenyl- methane diisocyanate and polyester; small quantities of a polymeric carbodiimide. Urepan 641G Polyaddition product made from diphenyl Approx. 45 light brown-beige pellets methane diisocyanate and polyester; small quantities of a polymeric carbodiimide. Urepan 643G Polyaddition product made from 1.20 Approx. 50 light brown pellets diphenylmethane diisocyanate and polyester; small quantities of a polymeric carbodiimide. Functional Additives Addolink 30/10 aromatic dihydroxy derivative 1.14 grayish-white flakes Rhenocure TT dimetric toluylene disocanate 1.48 white to yellow powder Rhenofit TAC/S 70% triallyl cyanurate; 30% silica 1.25 white, fine crumbling powder Page 19 of 22: This document contains important information and must be read in its entirety.

4

5 Global Rubber Performance Product and Technical Guide Rhein Chemie Corporation 145 Parker Court Chardon, OH 44024, USA Phone: Fax: Rhein Chemie Rheinau GmbH Duesseldorfer Strasse Mannheim, Germany Phone: +49 (0) Fax: +49 (0) Rhein Chemie Japan Ltd. Marunouchi Kitaguchi, Bldg. 23F Marunouchi, Chiyoida-ku Tokyo , Japan Phone: Fax: Rhein Chemie (Qingdao) Ltd. 43 Siliubei Road Li Chang District Qingdao , PR China Phone: Fax: Customer Service toll free number: BUY CHEM ( ) Health and Safety Information: Appropriate literature has been assembled which provides information concerning the health and safety precautions that must be observed when handling the Rhein Chemie Corporation products mentioned in this publication. For materials mentioned which are not Rhein Chemie Corporation products, appropriate industrial hygiene and other safety precautions recommended by their manufacturers should be followed. Before working with any of these products, you must read and become familiar with the available information on their hazards, proper use, and handling. This cannot be overemphasized. Information is available in several forms, e.g., material safety data sheets and product labels. Consult your Rhein Chemie Corporation representative or contact the Product Safety and Regulatory Affairs Department at Rhein Chemie Corporation. The following are registered trademarks of Rhein Chemie Rheinau GmbH, Germany: Addolink, Aflux, Aktiplast, Antilux, Geniplex, Rhenocure, Rhenofit, Rhenogran, RhenoMAG, Rhenopren, Rhenoslab and Rhenosin. The following are registered trademarks of Rhein Chemie Corporation: Curebead, Elast-O-Flux, Mag-Paste, Poly-Dispersion, Scorchguard O, Wyfire and Zic-Stick. Bayferrox is a registered trademark of Bayer AG, Germany. Porofor is a registered trademark of Lanxess Deutschland GmbH, Germany. Rhenodiv and Rhenofluor are trademarks of Rhein Chemie Rheinau GmbH, Germany. Urepan is a trademark of Lanxess Deutschland GmbH, Germany. The manner in which you use and the purpose to which you put and utilize our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any suggested formulations and recommendations are beyond our control. Therefore, it is imperative that you test our products, technical assistance and information to determine to your own satisfaction whether they are suitable for your intended uses and applications. This application-specific analysis must at least include testing to determine suitability from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been done by us. Unless we otherwise agree in writing, all products are sold strictly pursuant to the terms of our standard conditions of sale. All information and technical assistance is given without warranty or guarantee and is subject to change without notice. It is expressly understood and agreed that you assume and hereby expressly release us from all liability, in tort, contract or otherwise, incurred in connection with the use of our products, technical assistance, and information. Any statement or recommendation not contained herein is unauthorized and shall not bind us. Nothing herein shall be construed as a recommendation to use any product in conflict with patents covering any material or its use. No license is implied or in fact granted under the claims of any patent. R1/2T/D/11.08 Note: The information contained in this publication is current as of November, Please contact Rhein Chemie Corporation to determine if this publication has been revised.