WE ARE CASTING YOUR WISHES

Transcription

1 WE ARE CASTING YOUR WISHES COMPANY PRESENTATION HISTORY - together for over a century The first Company in Romania was founded in 1884, producing valve items. The range at that time was represented by fittings for gas, water and steam. SC ARMATURA SA is listed on the Bucharest Stock Exchange and since 2004 the main shareholder has been HERZ ARMATUREN Austria. The company has made the first steps in an investment program this began in 2006 and will last until The main investments are regarding research and product development, environmental protection, improved working conditions, optimization and automation of production processes. MEMBER OF THE HERZ AUSTRIA GROUP MISSION AND VALUES Our set of values defines the whole way we think about our business: 1

2 SPECIAL PRODUCTS. CONTRACT PRODUCTION We supply bespoke products for a number of large companies in Romania and abroad, the quality and our ability to adapt to our partners requirements ensures a long-term collaboration with a range of companies from various fields: natural gas supply, heating installations, extractive industry, shipbuilding, machinery industry etc. 2

3 PRODUCT RANGE VALVES FOR WATER OR GAS INSTALLATIONS We are traditional manufacturers for taps and valves for water and gas installations. The diversity and quality of the products have made it possible for these products to be marketed both at home and in the EU. PRODUCTS FOR USE IN GAS INSTALLATIONS Armatura SA offers you a complete range of valves, regulators, meter panels, burners and other accessories used in gas supply installations. FITTINGS FOR WATER OR GAS INSTALLATIONS Armatura SA offers you a complete range of cast iron fittings and sockets for water and gas installations in a full range of sizes. FENCE ORNAMENTS We offer a range of Ornaments for decorating the columns as well as the fence panels. These are positioned at the ends of bars and at the middle of them so that they allow the full decoration of the panels. These are available in a variety of models and add a touch of prestige to your home. 3

4 TECHNICAL PRODUCTION CAPABILITY IRON FOUNDRY Main characteristics of cast iron: - gray cast iron: EN-GJL200, ENGJL250,EN-GJL 300, according EN ; - malleable cast iron: EN-GJMB300-6,EN-GJMB and ENGJMB500-5, according EN ; - maximum dimensions for castings: 400 mm x 300mm x200mm; - weight of castings: 0,020 kg up to 20 kg; Process control: - optical emission spectrometer ARL 3460 Switzerland, for chemical composition; - mechanical testing laboratory (hardness, tensile strength, elongation, metallographic structure analysis). BRASS FOUNDRY Main characteristics of cast brass: - marks of brass: CuZn39Pb1AlB with fine granulation, CuZn35Pb2Al, CuZn36Pb2As according EN1982; - casting weight between 0,1 and 6 kg (depending on the procedure and equipment); - roughness Ra maximum 12,5 μm; - dimensional accuracy according ISO 8062 CT8 for dimensions; CT9 for wall thickness. BRASS AND STEEL FORGING Main characteristics of forged parts: - maximum weight of the part: 1,5 kg;- roughness Ra: maximum 3,2 μm;- dimensional accuracy according EN MECHANICAL PROCESSING DEPARTMENT The parts are manufactured by methods of complex machining of casted, forged semi-finished product or from laminates: turnery, drilling, threading, radial processing, milling, stamping, embossing, bending. - specialized line for cutting, shaping and bending of brass and copper pipes for sanitary tapware; ASSEMBLY DEPARTMENT The parts are manufactured by mechanical and manual operations: adjustment, drilling, tapping, assembly, testing, protective coatings. Technological equipment: - 5 mechanized assembly lines, each product is checked at the end of the assembly line by pressure; - stand for the pressure test: hydraulic up to 500 bar; pneumatic up to 100 bar; - mechanized line for spray painting; - temporary conservation line for corrosion protection; - installation for painting in electrostatic field. 4

5 TOOLSHOP All tools for casting / forging and about 80% of manufacturing and assembling tools are made in the toolshop. Technological equipment: - 2 CNC machining centers with vertical axis Hurco VMX42; - coordinated drilling and grinding machines, electro-erosion processing machines, lathes, milling machines, drilling and threading machines, sharpening machines; - secondary heat treatment sector. TECHNICAL DEPARTMENT Makes the design of the product, of the technologies and the production tools by using: - three-dimensional computer-aided design Unigraphics NX7 (CAD/CAM); - advanced techniques for product quality planning, APQP (risk analysis,fmea, Paretto diagrams, cause-effect diagrams, PPAP, SPC, QFD). QUALITY DEPARTMENT - spectral analysis laboratory equipped with optical emission spectrometer ARL 3460 Switzerland, for determining the chemical composition for: cast iron, brass, bronze, aluminum, alloyed and unalloyed steel; - mechanical testing laboratory (hardness, tensile strength, elongation, metallographic structure analysis); - metallographic microscope and a PC with a software for image analysis of metallographic structure; - metrological laboratory (length, weights, pressure, electrical measuring equipment, temperature measuring equipment, forces). CONTACT S.C. ARMATURA S.A Cluj Napoca Str. Garii, Nr. 19 Tel.: +40 (0) Fax: +40 (0) Web office@armatura.ro Sales Marketing Department Tel: +40 (0) , int 165 Fax +40 (0) sorin.avram@armatura.ro 5