BACOU BAC'RUN 846 S3 HRO SRC REF

Transcription

1 BACOU BAC'RUN 846 S3 HRO SRC REF GENERAL DATA Division : Body Protection Family : Professional Footwear Range : Bac'Run Line : Sport Brand formerly known as : BACOU Business Countries EMEA Middle East Activity Domains : Offshore Petro-chemical Industry Building and Construction Product Use : Safety footwear for professional use PRODUCT ADVANTAGES Feature : 200 J Spacium TM non metallic toe cap Non magnetic Extra wide Chemically neutral Benefit : Ultra light and comfortable Inalterable and excellent thermal insulator Feature : Insole Ergonomic and antistatic Anti-bacteria treatment Benefit : Provides optimal comfort and hygiene Feature : POLYNIT TM multi purpose PU/Nitril outsole Benefit : Resists to heat by contact up to 300 c, fuel oil & acides in weak dilut

2 TECHNICAL DESCRIPTION Sizes : Midsole : Stainless steel midsole for puncture resistance (1100N) Upper : Full grain natural oiled leather upper Fully lined in highly absorbent POROMAX fabric Cordura padded anatomical collar and tongue, with watertight lateral bellows Flexible reinforcements on the front and back of the shoe Toe Cap : 200 J SPACIUM Toe cap : Ultra light (50% lighter than a steel toe cap) non metallic Thermal insulation Inalterable Insole : Full, ergonomical, antistatic, antibacterial and removable insole Outsole : POLYNIT Ousole in PU Nitrile Density of PU comfort layer : 0,5 = optimal comfort Nitrile Outsole density : 1.6 Excellent grip properties due to deep, large self-cleaning studs Adherence coefficient: SRC, according to EN ISO 20345: 2004/Am.1: 2007 Shock absorption capacity > 20 joules Exceptionnal abrasion resistance : * Volume loss < 150 mm3 (under a weight of 1kg = 10 newtons) High stretching resistance (up to breaking point) : 650% Good resistance to repeted flexion > (test carried out with MATTIA flexometer) Excellent resistance to fuel oil : Volume variation (test of 22 hours) * oil ASTM N 1 swelling < 4% Excellent Heat resistance : 300 C Resistant to acids and alkalis in weak concentrations Additionnal Features : HRO SRC ADDITIONAL INFORMATION Accessories : BAC RUN Insole Size : Reference : Life Cycle : If the footwear is supplied with a part of, or the whole sole unit made of polyurethane: We advise that the footwear should be used in the limit of 3 years following the manufacturing date, which figures on the footwear. After this time limit, certain factors such as : exposure to sunlight, hydrometry, temperature changes, could cause a modification in the structure of the material, which would no longer maintain the same performance levels with regards to the requirements defined in the European Directive CEE. If the footwear is supplied with a sole unit made from a material other than polyurethane: We advise that the footwear should be used in the limit of 5 years following the manufacturing date, which figures on the footwear. Storage Information : Footwear should be stored in their original packaging, kept in a controlled stock area, not subject to rapid changes in temperature or humidity levels. Care Instruction : After use leave your footwear to dry in an aired place away from heat. Remove any excess dust or dirt with a brush. Remove any marks using a damp cloth and soap if necessary. Finally polish any grain or pigmented leathers using a commercially available shoe care product.

3 CERTIFICATION AND CONFORMITY European Directives : 89/686/EEC EC Category PPE* : Category II Standards : EN ISO 20345:2007 Tagging : BACOU EN ISO : 2007 S3 HRO SRC Reference : Quality Assurance : ISO 9001 / 2000 EC Attestation Number : 0075/826/161/11/08/0451 ext 03/11/08 Laboratory : CENTRE TECHNIQUE DU CUIR *PPE : Personal Protective Equipment

4 EC CONFORMITY DECLARATION The manufacturer or its legal representative supplier settled in the European Community: Sperian Protection Europe Declares that the next Personal Protective Equipment described here after is in conformity with the provisions of Council Directive 89/686/CEE: Designation: BACOU BAC'RUN 846 S3 HRO SRC Reference: Standard(s): EN ISO 20345:2007 This PPE is the object of the above EC attestation type: 0075/826/161/11/08/0451 ext 03/11/08 Delivered by: CENTRE TECHNIQUE DU CUIR 4 rue Hermann Frenkel Lyon Cedex 07 France Made at Lyon, on the 11/11/2008 By: Ailsa LHOPITAL Division: Body Protection

5

6

7

8