Novelties. New. Simply find solutions. WEICON App Available now! Trade fairs. Favourite. Products. Current developments.

Transcription

1 Favourite New Novelties Products WEICON App Available now! Current developments Print media Adhesive Company Trade fairs Code scanner Simply find solutions. Downloads of

2 PTFE-Fluid Dry lubricant for sensitive areas PTFE-Fluid is a special dry lubricant with strong anti-adhesive effect, and has an NSF registration for the foodstuffs sector. This means that it can be used in the foods and beverages industry and in the pharmaceuticals and cosmetics industries. Due to the high proportion of PTFE, the spray provides an antiadhesive effect through which the friction value on the coated surfaces is substantially reduced. PTFE-Fluid is grease-free and adheres to all metal, plastic and wooden surfaces. The coating repels dirt, dust and water and is resistant against oils, greases and many chemicals. Due to its special formula and the resulting NSF registration, WEICON PTFE-Fluid can contribute towards the improvement of workplace safety and health protection. The spray can be used as permanent lubrication in many sensitive industrial applications such as on sliding and running rails and guides, on conveyor belts, transport rollers and slides, on tilt mechanisms, locks and hinges, on cutting tools and packaging machines, for shafts in plastic bearings and as a coating for solid seals and assembly aid for seal packs. Lubricating a dough mixer's drive coupling Top-Lub-Fluid Adhesive lubricant for sensitive areas Top-Lub-Fluid is a special adhesive lubricant and has an NSF registration for the foodstuffs sector, meaning that it can be used in the foods and beverages industry and in the pharmaceuticals and cosmetics industries. Technical data Colour whitish, transparent Odour Features Temperature resistance almost odour-free PTFE basis -180 C to +260 C (-292 F to +500 F) Storage 24 months stability Clearance certificate for direct use with foods in accordance with USDA H2 400 ml Top-Lub-Fluid is particularly adherent and pressure- resistant, with excellent penetration properties, and is also noise-damping and water-repellent. The spray prevents elongation, friction and wear. Due to its special formula and the resulting NSF registration, WEICON Top-Lub-Fluid can contribute towards the improvement of workplace safety and health protection. The spray can be used on toothed wheels and worm gears, on joints and couplings, on rollers and bearings, on chains and wire cables or on spring assemblies as well as in numerous industrial fields. Technical data Colour slightly yellowish Odour neutral Features synthetic, transparent Temperature resistance -20 C to +250 C (-4 F to 482 F) 2 Maintenance of a cooler unit's rubber gaskets Storage stability 24 months Clearance certificate for direct use with foods in accordance with USDA H2 400 ml

3 Novelties 2016 W 44 T -Fluid Multifunctional oil for sensitive areas W44T-Fluid is a physiologically harmless multifunctional oil and has an NSF registration for the foodstuffs sector. This means that it can be used in the foods and beverages industry and in the pharmaceutical and cosmetics industries. The resin and acid-free oil unites lubrication, water displacement, corrosion protection, cleaning and conservation in one product due to a special active ingredient formula and excellent penetration properties. W44T-Fluid loosens seized screw connections, bolts, fittings, locks and valves, and penetrates and dissolves rust. It displaces Rust Loosener Fluid Penetrating oil for sensitive areas Rust Loosener Fluid is physiologically harmless and has an NSF registration for the foodstuffs sector. This means that it can be used in the foods and beverages industry and in the pharmaceuticals and cosmetics industries. Rust Loosener Fluid loosens rusted and oxidised screw connections, bolts, levers, joints and hinges as well as seized mechanisms on components. Due to its excellent penetrating properties, Rust Loosener Fluid can also penetrate into the smallest cavities. It secures the function of mechanical parts and electrical contacts. The spray lastingly protects against corrosion and oxidation. It cleans and cares for metal surfaces, mechanical parts and electrical systems. Due to its special formula and the resulting NSF registration, Rust Loosener Fluid can contribute towards the improvement of workplace safety and health protection. the humidity from electrical contacts, prevents leakage currents and facilitates the start-up of wet motors. Technical data Colour Odour Features Temperature resistance Storage stability beige Fast Cleaner almost odour-free Loosens, lubricates, protects, separates and maintains -20 C to +150 C (-4 F to +302 F) 24 months Clearance certificate for direct use with foods in accordance with USDA H1 Cleaner and degreasing agent for sensitive areas Fast Cleaner is used to clean and degrease surfaces which are bonded or sealed using WEICON adhesives and sealants, or which should be coated using WEICON metal sprays. Fast Cleaner is ph-neutral and material-compatible, and can be used on many different materials such as metals, glass, ceramics and most rubbers and plastics. Due to its special formula and the resulting NSF registration, the Fast Cleaner can contribute towards improvements in occupational safety and health protection. 400 ml Technical data Colour Odour Features Temperature resistance Storage stability beige almost odourless loosens, lubricates, cleans and protects -20 C to +150 C (-4 F to +302 F) 24 months Clearance certificate for direct use with foods in accordance with USDA H1 400 ml Technical data Colour Odour Features Temperature resistance Storage stability colourless solvent NSF K1/K3 approval -10 C to +50 C (-14 F to -58 F) 24 months NSF K1: Solvent cleaners Nonprocessing area products; NSF K3: Solvent cleaners Adhesives/glue removers 500 ml

4 Plast-o-Seal Permanently plastic universal sealant Solvent free with no unpleasant odour Enables immediate assembly Flex+bond Highly elastic and strong 200 ml White: RAL 9003* 200 ml Black: RAL 9004* 200 ml Grey: RAL 7000* 200 ml transparent Support of a solid seal at a gear block 230 g Properties and advantages: To seal level machined flanges of machine, gearbox and motor housings To support and optimise old and new solid seals made of paper, cork, felt, etc. Free of solvents odourless Infinitely ductile before and after assembly Easy removal Very high resistance against fuels, mineral oils as well as against water and air, methanol and glycose compounds, antifreeze, kerosene, fluorocarbon coolants, etc. Maximum filling of gaps up to 0.10 mm (without solid seal) Non-sagging can also be processed on vertical surfaces Temperature resistant from -50 C to +200 C (-58 F to +392 F); for a short time up to +250 C (+482 F) Non-corrosive Free of substances impairing paint-wetting, such as silicones Fluorescent colour WEICON Flex+bond is strong, permanently elastic, temperature resistant from -40 C to +90 C (-40 F to +194 F), weather resistant, resistant to UV rays, overpaintable (wet in wet), sandable and resistant to ageing and salt water. It is free of silicone, isocyanate, halogens and solvents. 4 *Corresponds approximately with the stated RAL colour shades

5 Novelties 2016 Anti-Seize Reliable protection against corrosion, seizing and cold welding WEICON Anti-Seize is high-temperature resistant (-180 C to +1,200 C/-292 F to +2,192 F) and exhibits exceptionally good release characteristics. Anti-Seize is used as a protecting, separating and lubricating agent for highly stressed parts. Ideally compatible solid contents and selected additives enable a wide range of usage. It protects against corrosion, seizure and wear, stick-slip phenomena, oxidation, fretting corrosion and electrolytic reactions ( cold welding ). 200 ml Copper Paste Protecting, separating and lubricating agent for highly stressed parts in high-temperature applications WEICON Copper Paste is a protective substance, release agent and lubricant, resistant to high temperatures (-20 C to +1,100 C /-4 F to +2,012 F) and corrosionresistant, strongly adhesive and sulphur-, lead- and nickel-free. WEICON Copper Paste is used as an assembly lubricant for all kinds of threaded joints and slising surfaces. It forms an effective lubricating and separating film which protects the functional surfaces on plug-in tools, wear bushings, screws and all kinds of threaded, plug-in and bayonet joints against corrosion and seizing. It can be used to reduce vibration on brake blocks and guides, brake cams and pins, car and truck battery terminals and other electrical connections, wheel bolts and nuts and on wear bushings at electrical, compressed air and hydraulic hammers. The product can be used in many industrial applications. 200 ml Black-Seal Extremely resistant against oil and grease WEICON Black-Seal adhesive and sealant is black, high-temperature resistant (+280 C/+536 F), free of solvents, strong, oil-resistant, grease-resistant, pressure-resistant, resistant to ageing and extremely elastic (breaking elongation of approx. 500%) Black-Seal is suitable for bonding and sealing in applications where particularly high oil and grease resistance is required. WEICON Black-Seal can be used on gearbox, valve and casing covers, oil sumps and oil pumps, water pumps, gearboxes and axles, flanges, tanks and containers and in many other areas. *Corresponds approximately with the stated RAL colour shades 200 ml Black: RAL 9005* Reinforcement of cylinder head gasket 5

6 Threadlocking Varnish Protection and safety against manipulation Threadlocking Varnish is a solvent-based, fast drying securing and marking varnish with good adhesion to many materials. The varnish serves as a removable lock, as protection against tampering by unauthorised persons, as a cover for electricallyconductive parts and as protection against corrosion and influencing through contact. The Threadlocking Varnish is durable against water, petrol, diesel, mineral oil, paraffin oil and diluted acids and lyes. The Threadlocking Varnish is essential for locking screw connections of all kinds, protecting against manipulation and unauthorised loosening of screws and connections, documenting quality assurance measures, production control and product inspection through a varnish seal for the visual inspection of connected, adjusted parts. Threadlocking Varnish is available in the colours yellow, green and red. 30 g yellow: RAL 1021* WEICONLOCK AN Pipe and thread sealing for passive materials*, DVGW approval high viscosity medium strength disassembly with normal tools 50 ml ml WEICONLOCK AN Threadlocking for passive materials*, DVGW approval higher viscosity medium strength hard to disassemble 20 ml ml ml fast cure WEICONLOCK also without Activator 30 g green: RAL 6010* 30 g red: RAL 3000* *Corresponds approximately with the stated RAL colour shades * Passive materials: (slow hardening) High-alloy steel Aluminium, nickel, zinc, gold Oxide films Chromate coats Anodic coatings Plastics and ceramics Threadlocking Varnish 6

7 Novelties 2016 i The following products are also available in the new SEMCO cartridge: WEICONLOCK AN Pipe and thread sealing, DGVW approval high viscosity medium strength disassembly with normal tools WEICONLOCK AN Surface seal for bridging large gaps with immediate sealing effect, high-temperature resistant high viscosity high strength hard to disassemble WEICONLOCK AN Pipe and surface seal (with PTFE), immediate sealing effect, tested by the DVGW high viscosity medium strength disassemble with normal tools WEICONLOCK AN Surface seal for sealing flanges high viscosity low strength easy disassemble WEICONLOCK AN Surface seal for sealing flanges high viscosity high strength hard to disassemble WEICONLOCK AN Thread sealing, DVGW and BAM approval for oxygen high viscosity medium strength disassemble with normal tools WEICONLOCK AN Jointing compound for worn out bearing rings and bushes high viscosity high strength hard to disassemblel Bonding of black PE profiles Easy-Mix PE-PP 45 Fast, high strength, process-safe WEICON Easy-Mix PE-PP 45 is a twocomponent construction adhesive on the basis of methyl acrylate. It is in particular suitable for structural, high-strength bonding of low energy plastics like PE, PP and TPE. In addition, WEICON Easy-Mix PE-PP 45 can be used as universal adhesive for plastics like: Rigid PVC (polyvinyl chloride) PA (polyamide) PC (polycarbonate) ABS (acrylnitrile butadiene acrylate) PMMA (polymethyl methacrylate) Fibre reinforced materials (GRP,CRP,fibre glass etc.) and many others. Now also available in black ml black 7

8 Flex 310 M Liquid Liquid, self-levelling Flex 310 M Liquid is a self-levelling, onecomponent casting and coating mass based on polyoxypropylene. Flex 310 M Liquid is permanently elastic and can be painted over after curing. The flexible adhesive and sealing substance cures odourless, it is weather and UV-resistant, has excellent anti-aging properties and is free of silicone. Flex 310 M Liquid can be used in diverse applications for bonding and sealing of very different materials such as metals, many plastics, ceramics, wood, glass or stone and for insulation and impregnation. 310 ml White: RAL 9003* Speed-Flex Crystal Crystal-clear adhesion Speed-Flex Crystal is a quick-acting, strong and general-purpose power adhesive on MS polymer basis. Due to its strong adhesive force, it can replace conventional fastening solutions such as screws, dowels or rivets. Speed-Flex Crystal is pasty and tight; thus even adhesions on vertical surfaces in interior and exterior areas can be easily carried out. The new adhesive and sealing substance can be painted over "wet in wet", is resistant to aging, weather-resistant, UV-resistant and free of silicones, isocyanates, halogens and solvents. Due to its crystal-clear curing properties, Speed- Flex Crystal is particularly suitable in areas which should remain visually appealing, where no adhesive seam should be visible. Thus e.g. transparent plastics, acrylic glass or other materials can be quickly, cleanly and appropriately connected with each other. 310 ml Flex 310 RLT Sealant for air conditioning/ventilation construction and cleanroom technology Flex 310 RLT is a special one-component adhesive and sealant based on polyurethane, which was developed for the specific requirements of air conditioning/ventilation construction and for cleanroom technology. Flex 310 RLT complies with the requirements according to VDI 6022 (sheet 1) It can be used in diverse ventilation and air conditioning systems in buildings and rooms for bonding and sealing of very different materials such as metals, many plastics, ceramics, wood, glass or stone. Flex 310 RLT is permanently elastic and strong adhesive, and can be ground and painted over after curing. The flexible adhesive and sealant cures odourless; it is weather and UV-resistant, has excellent aging stability, is pasty and free of silicone. *Corresponds approximately with the stated RAL colour shades certified for cleanroom technology according to VDI Grey: RAL 7000* Smoothing Agent Simple smoothing of many sealants Primer E 500 The Smoothing Agent is a transparent mixture of non-ionic surface activators. Applying it makes it possible to easily and cleanly smooth off all WEICON elastic adhesives and sealants such as silicone, MS polymers, polyurethane, etc. prior to skin formation. 5 L ml Spray bottle Especially for silicones - for pre-treating non-absorbent surfaces such as aluminium, steel, VA steel, brass, copper, zinc, tinplate and enamel, ceramics and glass as well as plastics such as ABS, PVC hard, PA6.6, GFC and many more. 250 ml

9 Novelties O-Ring Bonding Set Using the O-Ring Bonding Set, sealing rings out of all common materials can be produced in no time. WEICON O-Ring Bonding Set consists of: Contact VA 30 Black 12 g Surface Cleaner 150 ml Contact Primer 10 ml WEICON Safety Knife 3 4 Set Contact Primer for Polyolefines Without pre-treatment, many plastics are unable to bond or bond only under certain conditions. When these plastics are pre-treated with WEICON Contact Primer, their surface structure changes. Thereby the joining of plastics, like polyethylene (PE) and polypropylene (PP) belonging to the polyolefine group which are usually difficult to bond, is made possible. Even modern thermoplastic elastomers (TPE), PTFE and related plastics as well as silicones, can be bonded when pre-treated with WEICON Contact Primer. 10 ml Pump Dispenser 100 ml Pump Dispenser 9

10 W 44 T Multi-Spray Multifunctional oil with multiple effect WEICON W44T is a multifunctional product which, thanks to its special formula and outstanding creeping capacity, combines corrosion protection, water displacement, lubrication, conservation and cleaning in a single product. W44T loosens seized threads, bolts, fittings and valves, penetrates and dissolves rust, dispels moisture and makes it easier to start wet motors. It eliminates squeaky and creaky noises on hinges, guides, bearings and all types of joints and couplings. It cleans solled metal surfaces and leaves a long-lasting razor thin film which does not smear or stick and does not attract dust. It protects and preserves all types of tools, machines and electrical and mechanical precision devices and keeps them functional. NEW 500 ml Double Nozzle Only for the 500 ml product Bio-Cut Cutting oil WEICON Bio-Cut contains no mineral oil, has water pollutant class 1 as a self-classification according to VwVwS (Verwaltungsvorschrift wassergefährdene Stoffe = German Administrative Regulation Regarding Water Pollutants), and is completely biodegradable. Thanks to its particularly high lubricating effect, Bio-Cut enables high cutting speeds, long tool lives and thus also high tool cutting performance. WEICON Bio-Cut can be used for drilling, turning, milling, grinding, sawing, punching and thread cutting in all industrial applications. 250 ml Bearing lubrication on a labelling machine 500 ml Lubrication of a fork mounting for forklifts 10

11 MESSERSTAHL Qualität aus Solingen Novelties 2016 Quadro-Stripper No. 16 Stripping and dismantling of all common round cables from 8-13 mm ø, hook blade and stripping range are integrated. Fast and easy longitudinal cut due to optimised cable routing in casing. Integrated stripping range for all flexible and solid conductors with the cross sections 0.5 mm 2, 0.75 mm 2, 1.5 mm 2, 2.5 mm 2, 4.0 mm 2 and 6.0 mm 2. Retractable hook blade that can be firmly locked in any position and is easy to exchange. Cable Scissors No. 35 For cutting and stripping Cu/Al cables and for crimping wire ends from mm². The blades of the cable scissors are made of stainless special steel. The blade is equipped with a fine micro toothing to achieve a flush cut and to prevent the cable from slipping. The handles are made from an impact resistant, glass fibre reinforced plastic. Longitudinal cut on a NYM wire Cut through a NYM wire Electrical Installation Sets These four special 2-piece sets offer suitable tools for very different applications in virtually any sector of industry. Duo-Crimp No. 300 Round Cable Stripper No. 13 Wire Stripper No. 5 Cable Stripper No. S 4-28 Wire Stripper No. 5 Coax-Stripper No Wire Stripper No. 5 Round Cable Stripper No. 13 Crimp Set Pro Wire Stripper No. 7 Magic Duo-Crimp No. 300 Shaker with wire ends Starter Set Pro Wire Stripper No. 5 Coax-Stripper No. 2 Cable Stripper No. S 4-28 Round Cable Stripper No

12 WEICON GmbH & Co. KG (Headquarters) Königsberger Str. 255 DE Münster P.O. Box DE Münster Germany Phone: +49 (0) info@weicon.de WEICON Middle East L.L.C. Jebel Ali Ind Area 3 P.O. Box Dubai United Arab Emirates Phone: info@weicon.ae WEICON Kimya Sanayi Tic. Ltd. Şti. Yenibosna Mahallesi Yalçın Koreş Caddesi Arifağa Sokak No: 29 Kat: Yenibosna Istanbul Turkey Phone: +90 (0) info@weicon.biz.tr WEICON Inc. 20 Steckle Place Unit 20 Kitchener Ontario N2E 2C3 Canada Phone: info@weicon.ca WEICON Romania SRL Str. Podului Nr Budiu Mic (Targu Mures) Romania Phone: +40 (0) office@weicon.com WEICON SA (Pty) Ltd Unit No. D1 Enterprise Village Capricorn Drive Capricorn Park Muizenberg 7945 (Cape Town) South Africa Phone: +27 (0) info@weicon.co.za WEICON South East Asia Pte Ltd 5 Soon Lee Street Pioneer Point #03-56 Singapore Phone: (+65) info@weicon.com.sg weicon.com Novelties 2016 Distributed by All specifications and recommendations in this brochure are not guaranteed properties. They are based on our research results and experience. However, they are non-binding because we cannot be responsible for compliance with the processing conditions as we are not aware of the user's special application conditions. We can only provide a guarantee for the consistently high quality of our products. We recommend that you carry out your own appropriate tests to determine whether the properties you require can be achieved with the specified product. No claims can be derived. The user bears the sole responsibility for non-appropriate or other than specified applications. BL/ / 01/16/2