Conforming to IEC Standard The Next-Generation Ethernet Connector for Industrial Equipment

Transcription

1 Conforming to IEC Standard The Next-Generation Ethernet Connector for Industrial Equipment IX Series Contribution to size reduction Compact size 75% reduced size compared to RJ-45 Overview Multi-purpose small-sized I/O connector for industrial machinery. Conforming to IEC Standard IEC PAS Compact size, robust and high speeds. High EMC resistance. Features 1. Contribution to size reduction The ix Industrial offers a reduced size of 75% compared to conventional RJ-45 modular solutions. This size reduction allows for reduced installation space. Parallel-mounting at P=1mm is possible. 2. Single action lock design The connector locks by simply inserting the plug into the receptacle. An audible click insures locking. The lock can be released by pushing a button on the plug leading to smooth removal. 3. Robust design resistant to wrenching forces The PCB-mounted receptacle shell is designed to minimize the influence of wrenching force from the plug on the mated surface. Additionally, the PCBmounted shape is designed to protect the contacts. Unique metal hold down placement which can prevent peeling of contacts. Stainless steel material is used for metal parts to enhance the mechanical strength. 4. High EMC Resistance Optimized shielding design guarantees high EMC resistance to secure safe data transmission. 5. High Data Rate Transmission Cat.5e (1Gbps) and Cat.6A (1Gbps) high-speed Ethernet performance. 6. PIP (Pin-In-Paste) mounting possible The receptacle shell is mounted at the through hole section of the PCB to enhance the mounting strength of the PCB. Both signal contact SMT and PIP mounting allows for reflow-mounting and reduction of man-hours required for board processing. RJ-45 Lock design ix Industrial TM Parallel-mounting at P=1mm is possible Audible Click! Single action lock allows for easy operation Clear tactile click prevents insufficient mating

2 Product Specifications Ratings Voltage Electric current AC 5V / DC 6V Operating temperature range 1.5A All-pin signal Storage 3.A 4 pins of contacts No.1, 2, 6 and 7 temperature range -4 to +85 (Note 1) -3 to +6 Items Specifications Conditions 1. resistance Signal : 3m or less (Note 2) Shield : 1m or less (Note 2) Measured at 1mA 2. Insulation resistance 5M or more Measured at DC 5V 3. Withstanding voltage No flashover or breakdown Apply a voltage of DC 5V for 1 minute. 4. Mechanical Signal : 8m or less (Note 2) operation Shield : 1m or less (Note 2) 5 times 5. Vibration resistance 6. Shock resistance 7. Fretting corrosion resistance Materials / Finish No electrical discontinuity of 1 s or more No damage, crack or loosened parts No electrical discontinuity of 1 s or more No damage, crack or loosened parts Note 1 : Includes temperature rise due to current flow. Note 2 : Conductor resistance of the cable isn't included. Receptacle Plug 1 to 5Hz, half amplitude.35mm, Acceleration of 5m/s². 3m/s², 11ms duration, 3 axis both directions, 3 times each. 49m/s², 3 times/min, 1 times Component Materials Color/Finish Remarks Insulator Liquid crystal polymer Gray UL94V- Copper alloy Partially gold plated Shielding plate Stainless steel Shell Stainless steel Tin plated Component Materials Color/Finish Remarks Copper alloy Partially gold plated Insulator Polyamide resin Black, Dark gray UL94V- Shielding plate Stainless steel Insulated case Polyamide resin Black UL94V- Guide Polycarbonate resin Transparent, Clear yellow UL94V- Shield case Stainless steel Nickel plated Shield shell Stainless steel Nickel plated Cover case Polycarbonate resin Dark gray UL94V- 2

3 Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Receptacle IX 61 G A 1 P (**) Plug IX 4 G A 1 S CV 7. (**) Series name IX IX Series Mounting/connection method 4 Hand soldering 3 IDC (26 to 28 AWG, Cable outer dia meter Ø.95 to IDC (24 to 26 AWG, Cable outer dia meter Ø1.1 to Right angle SMT (vertical right angle type) Correspond to Gigabit Ethernet G Mating key A Akey B Bkey Number of s Diagram of Connector Mating Combinations Receptacle Plug * ** polarity P Male contact S Female contact Plug cover CV Cable outlet direction : Straight Applicable cable diameter (7.) Sheath outside diameter Ø6.3 to 7.2 Plating specifications Blank Gold plated (1) Palladium-Nickel plated + Gold plated * ** * ** Mating key (A, B type) of Plug & Receptacle must be the same for mating. * ** 3

4 Receptacle (Vertical right angle type) No.1 No.1 Receptacle mating key shape AKey BKey No.5 No.6 Part No. HRS No. Plating of the contact area IX61G-A-1P Gold plated.2 m IX61G-A-1P(1) Palladium-Nickel plated.75 m + Gold plated.5 m IX61G-B-1P Gold plated.2 m IX61G-B-1P(1) Palladium-Nickel plated.75 m + Gold plated.5 m Plug No (6.2) 8.4 (8.8) No.1 No No.1 (1) No.6 No Plug mating key shape AKey BKey Ø7.2) 1.25 Part No. HRS No. Plating of the contact area IX4G-A-1S-CV(7.) Gold plated.2 m IX4G-A-1S-CV(7.)(1) Palladium-Nickel plated.75 m + Gold plated.5 m IX4G-B-1S-CV(7.) Gold plated.2 m IX4G-B-1S-CV(7.)(1) Palladium-Nickel plated.75 m + Gold plated.5 m IX3G-A-1S-CV(7.) Gold plated.2 m IX3G-A-1S-CV(7.)(1) Palladium-Nickel plated.75 m + Gold plated.5 m IX3G-B-1S-CV(7.) Gold plated.2 m IX3G-B-1S-CV(7.)(1) Palladium-Nickel plated.75 m + Gold plated.5 m IX31G-A-1S-CV(7.) Gold plated.2 m IX31G-A-1S-CV(7.)(1) Palladium-Nickel plated.75 m + Gold plated.5 m IX31G-B-1S-CV(7.) Gold plated.2 m IX31G-B-1S-CV(7.)(1) Palladium-Nickel plated.75 m + Gold plated.5 m 4

5 Recommended Land Pattern Dimensions * No.1 (9.75) TH 4 R.6 4 R R.5 Board end 1.2 HOLE Mating position LAND LAND.8 TH.6 TH 2 LAND 16 R.6 16 R TH LAND TH LAND 7.5 Pattern forbidden area General tolerance unless specified ±.5. Recommended Panel Thickness * PCB Housing panel Board end IX G- -1S-CV General tolerance unless specified ±.2. Mounting surface 4 R Reference dimensions Cable Clamp Jig Tools Part No. HRS No. Remark HT83/IX3G-1S IX**G-*-1S-CV(7.) 5

6 Powered by TCPDF ( IX Series Conforming to IEC Standard The Next-Generation Ethernet Connector for Industrial Equipment HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE 23 Warrenville Road, Suite 15, Downers Grove, IL 6515 Phone : HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE 2841 Junction Ave, Suite 2 San Jose, CA Phone : Fax : HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) N. Laurel Park Drive, Suite 253, Livonia, MI Phone : Fax : HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE 3 Brickstone Square Suite 21, Andover, MA 181 Phone : GERMANY: HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE Neumeyerstrasse 22-26, 9411 Nurnberg Phone : Fax : UNITED KINGDOM: HIROSE ELECTRIC EUROPE BV (UK BRANCH) 4 Newton Court, Kelvin Drive, Knowlhill, Milton Keynes, MK5 8NH Phone : Fax : CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 9-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, 52 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 5188 Phone : Fax : KOREA: HIROSE KOREA CO.,LTD. 143, Gongdan 1-daero, Siheung-si, Gyeonggi-do, 1584, Korea Phone : Fax : THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 111 CC Amsterdam Z-O Phone : Fax : GERMANY: HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE Bayernstr. 3, Haus C 3855 Langenhagen, Germany Phone : Fax : CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD. 18, Enterprise Center Tower 2, 29# Gong He Road, Jing an District, Shanghai, CHINA 27 Phone : Fax : HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 11, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : Fax : SINGAPORE: HIROSE ELECTRIC SINGAPORE PTE. LTD. 3, Anson Road, #2-1, Springleaf Tower, Singapore 7999 Phone : Fax : GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Schoenbergstr. 2, 7376 ostfildern Phone : Fax : FRANCE: HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE 13 Avenue Joseph Kessel, Bat E, 7896 Voisins le Bretonneux, France Phone : Fax : CHINA: HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH A11, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, 125 Phone : Fax : TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 13 8F, No.87, Zhengzhou Rd., Taipei Phone : Fax : INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE Office NO.552, Regus-Green Boulevard, Level5, Tower C, Sec62, Plot B-9A, Block B, Noida, 2131, Uttar Pradesh, India Phone : Fax : INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE Unit No-43, 4th Floor, No-84, Barton Centre, Mahatma Gandhi (MG) Road, Bangalore 56 1, Karnataka, India Phone : Fax : MALAYSIA: PENANG REPRESENTATIVE OFFICE , Ideal@The One, Jalan Mahsuri, Bayan Lepas Penang, 1195, Malaysia Phone : THAILAND: BANGKOK OFFICE (REPRESENTATIVE OFFICE) Unit 473, 47th FL., 1 Empire Tower, South Sathorn Road, Yannawa, Sathorn, Bangkok 112 Thailand Phone : Fax : ,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi ,JAPAN TEL: Fax: The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 11/217. Contents are subject to change without notice for the purpose of improvements.