INDUSTRY. Welding Cables. Highly flexible, resistant and robust.

Transcription

1 INDUSTRY Welding Cables Highly flexible, resistant and robust.

2 Flexible welding cables

3 Weather resistant and robust These cables are designed for connection between welding apparatus and electrode as well as for rigid connections in the industry. They can be used indoors and outdoors as well as for installations in demanding environments and under exceptional temperatures. Welding cables are complex and extremely resistant to light, chemicals and mechanical influences. They are available in two versions - standard or highly flexible and with either single or double insulation.

4 WELDING CABLE ARCOFLEX H01N2-D 100 V Application Suitable for use with hand-held electrodes at 100V and for connection to the secondary side of welding transformers where the cables are subject to high mechanical stresses. Also suitable for low voltage power supply (e.g. battery banks). Can be used for flexible installation under extreme temperatures, in dry, humid or moist environments indoors as well as outdoors. Material property > Flame retardant acc. to IEC > Oil resistant acc. to IEC Temperature > Max. conductor temperature: +85 C > Max. short circuit temperature: +250 C > Lowest temp. flexible installation: -25 C Design > Standard: HD 22.6, EN > Specification: DIN VDE > Approval: VDE, <HAR> Mechanical data > Bending radius: max. 5 x D Acc. to DIN VDE 0298 part 3 > Tensile strength: max. 15 N/ Electrical data > Rated voltage: 100 V > Test voltage: 1 kv > Max. operating voltage AC: 110/110 V > Max. operating voltage DC: 165/165 V Construction Conductor: > Tinned or bare copper > Multi-stranded class 6 > Highly flexible Seperator: > Paper tape Sheath: > Cross-linked rubber compound > Acc. to DIN EN > Black 85

5 Conductor diameter min. mm diameter max. mm Weight kg/km Standard length m 10 7,7 9,7 170 T ,8 11,0 201 T ,1 12,7 283 T ,4 14,2 378 T ,2 16,5 534 T ,3 19,2 737 T ,1 21,4 961 T ,2 24, T ,1 26, T ,1 28, T ,8 32, T500 Additional s are available upon request. Conductor corss-section Max. tensile strength N Min. bending radius mm Conductor resistance at 20 C Ω/km , , , , , , , , , , ,080 Values based on 5 min. repetition periods. Current carrying capacity A Content is subject to changes acc. to current product development and or any changes to standards.

6 WELDING CABLE ARCOFLEX ATON 100 V Application Suitable for use with hand-held electrodes at 100V and for connection to the secondary side of welding transformers where the cables are subject to high mechanical stresses. Also suitable for low voltage power supply (e.g. battery banks). Can be used for flexible installation under extreme temperatures, in dry, humid or moist environments indoors as well as outdoors. ATON version was specially developed to operate under very low temperatures. Material property > Flame retardant acc. to IEC > Oil resistant acc. to IEC Temperature > Max. conductor temperature: +85 C > Max. short circuit temperature: +250 C > Lowest temp. flexible installation: -40 C Design > Standard: HD 22.6, EN > Specification: DIN VDE > Approval: VDE, <HAR> Mechanical data > Bending radius: max. 5 x D Acc. to DIN VDE 0298 part 3 > Tensile strength: max. 15 N/ Electrical data > Rated voltage: 100 V > Test voltage: 1 kv > Max. operating voltage AC: 110/110 V > Max. operating voltage DC: 165/165 V Construction Conductor: > Tinned or bare copper > Multi-stranded class 6 > Highly flexible Seperator: > Paper tape Sheath: > Cross-linked rubber compound > Acc. to DIN EN > Black 85

7 Conductor diameter min. mm diameter max. mm Weight kg/km Standard length m 10 7,7 9,7 170 T ,8 11,0 201 T ,1 12,7 283 T ,4 14,2 378 T ,2 16,5 534 T ,3 19,2 737 T ,1 21,4 961 T ,2 24, T ,1 26, T ,1 28, T ,8 32, T500 Additional s are available upon request. Conductor corss-section Max. tensile strength N Min. bending radius mm Conductor resistance at 20 C Ω/km , , , , , , , , , , ,080 Values based on 5 min. repetition periods. Current carrying capacity A Content is subject to changes acc. to current product development and or any changes to standards.

8 WELDING CABLE FLEXIPREN H01N2-E 100 V Application Suitable for use with hand-held electrodes at 100V and for connection to the secondary side of welding transformers where the cables are subject to high mechanical stresses. Also suitable for low voltage power supply (e.g. battery banks). Can be used for flexible installation under extreme temperatures, in dry, humid or moist environments indoors as well as outdoors. Material proterty > Flame retardant acc. to IEC > Oil resistant acc. to EN Temperature > Max. conductor temperature: +85 C > Max. short circuit temperature: +250 C > Lowest temp. flexible installation: -25 C Design > Standard: HD 22,6, EN > Specification: DIN VDE > Approval: VDE, <HAR> Mechanical data > Bending radius: acc. to VDE 0298 part 3 > Tensile load on conductor: max. 15 N/ Electrical data > Rated voltage: 100/100V (300/300 V) > AC test voltage: 1 kv > Max. operating voltage AC: 110/110 V > Max. operating voltage DC: 165/165 V Construction Conductor: > Multi-stranded copper wires > Class 6. > Highly flexible Seperator: > Paper tape > Easy stripping Sheath: > Cross-linked elastomeric compound > Acc. to DIN EN : EM5 > Black 85

9 Conductor diameter min. mm diameter max. mm Weight kg/km Standard length m 10 6,2 7,8 T ,3 9,1 201 T ,6 10,8 283 T ,8 12,3 378 T ,9 14,8 534 T ,6 17,0 737 T ,6 19,5 961 T ,2 21, T ,8 23, T ,4 25, T ,0 28,0 T500 Additional s are available upon request. Conductor corss-section Max. tensile strength N Min. bending radius mm Conductor resistance at 20 C Ω/km , , , , , , , , , , ,080 Values based on 5 min. repetition periods. Current carrying capacity A Content is subject to changes acc. to current product development and or any changes to standards.

10 WELDING CABLE AUTO-FLEX V Application AUTO-FLEX 360 cable is specially designed for installation in welding robots with 360 articulation. It utilize a unique copper conductor stranding and a slim, reduced diameter to exceed even the most extreme bend radius in a transgun welding dress-out. AUTO-FLEX 360 installs easily and offers a cost-saving alternative to traditional transgun welding cables Material property > Flame resistant acc. to CSA FT-1 & FT-5 > Oil resistant > Chemical resistant > UV-resistant Temperature > Max. conductor temperature: 90 C Design > Approval: ETL listed acc. to UL 1276 > Approval: MSHA for size > 2 AWG > Certification: CSA FT-1 & FT - portable power cable / Arc welding cable Electrical data > Rated voltage: 600 V DC Construction Conductor: > Multi-stranded copper wires > Class M. - softly drawn uncoated > Acc. to ASTM B-3, ASTM B-172, UL-62 > Rope standing > Highly flexible Seperator: > Paper tape Sheath: > Thermoset CPE compound > Acc. to ANSI/NEMA WC58 ICEA S > Yellow (other colours on request) 90

11 Conductor AWG Conductor diamter mm Ampacity * 4 21,2 0, ,6 0, ,4 0, /0 53,4 0, /0 67,5 0, /0 85,0 0, /0 107,2 0, Additional s are available upon request. Conductor Stranding Weight kg/km 4 AWG 1061/ (309) 2 AWG 1666/ (476) 1 AWG 2107/ (565) 1/0 AWG 2646/ (737) 2/0 AWG 3325/ (885) 3/0 AWG 4256/ (1139) 4/0 AWG 5320/ (1324) * Based on continuous duty 30 C ambient temp. at 90 C Content is subject to changes acc. to current product development and or any changes to standards.

12 WELDING CABLE INDUSTRITE WELDING 600 V Application Halogen-free cable designed and manufactured for use in welding and other flexing applications where flame, abrasion, chemicals, moisture, impact, tearing, and temperature extremes are considerations. Applications include welding electrode leads, welding stingers, welding ground leads, battery cable, bus welding boxes, jumper cables, ground cables, lift trucks, and other portable power applications where extreme flexibility is required. Material proterty > Flame resistant acc. to CSA FT-1 & FT-5 > Oil resistant > Chemical resistant > UV-resistant Temperature > Max. conductor temperature: 90 C Design > Approval: ETL listed acc. to UL 1276 > Approval: MSHA for size > 2 AWG > Certification: CSA FT-1 & FT - portable power cable / Arc welding cable Electrical data > Rated voltage: 600 V DC Construction Conductor: > Multi-stranded copper wires > Class M. - softly drawn uncoated > Acc. to ASTM B-3, ASTM B-172, UL-62 > Rope standing > Highly flexible Seperator: > Paper tape Sheath: > Thermoset CPE compound > Acc. to ANSI/NEMA WC58 ICEA S > Orange (other colours on request) 90

13 Conductor AWG Conductor diamter mm Ampacity * 4 21,2 0, ,6 0, ,4 0, /0 53,4 0, /0 67,5 0, /0 85,0 0, /0 107,2 0, Additional s are available upon request. Conductor Stranding Weight kg/km 4 AWG 1061/ (309) 2 AWG 1666/ (476) 1 AWG 2107/ (565) 1/0 AWG 2646/ (737) 2/0 AWG 3325/ (885) 3/0 AWG 4256/ (1139) 4/0 AWG 5320/ (1324) * Based on continuous duty 30 C ambient temp. at 90 C Content is subject to changes acc. to current product development and or any changes to standards.

14 Nov DK Linking the future Prysmian Group Denmark A/S Roskildevej 22 DK-2620 Albertslund Danmark Draka Kabel Sverige AB Vallgatan Nässjö Sweden Draka Norsk Kabel AS Postboks 369 Bragernes 3001 Drammen Norway Sales Telephone: kim.laursen@prysmiangroup.com dk-ti-sales@prysmiangroup.com Sales Telephone: Telephone: info.se@prysmiangroup.com order.se@prysmiangroup.com offert.se@prysmiangroup.com Sales Telephone: Telephone: no-kundesenter@prysmiangroup.com Prysmian Finland OY Mailbox: Kaapelitie Pikkala Visit: Johdintie 5, Oulu Finland Sales Telephone: fi-info@prysmiangroup.com Draka Keila Cables AS Paldiski mnt Keila Estonia Sales Telephone: (Latvia) Telephone: (Lithuania) info.keila@prysmiangroup.com