440 F S 031 M B P T. Connector Designator. O-Ring Length **.135 (3.4) Typ..075 (1.9) Ref (9.7) Typ. F (Table IV) B (Table I)

Transcription

1 MI/RFI anding and Shrink oot dapter irect Coupling - Standard Profile CONNCTOR SINTORS - * -C---F ---K-L-S * Conn. esig. See Note 5 IRCT COUPLIN Product Series Connector esignator ngle and Profile = 45 = 90 S = Straight asic Part No. Finish (Table II) 4 F S 031 M -8 P T Shrink oot (Table V - Omit for none) Polysulfide (Omit for none) = and K = Precoiled and (Omit for none) Length: S only (1/2 inch increments, e.g. 8 = inches) Length ±.060 (1.52) Min. Order Length 2.0 Inch (See Note 3) Shell Size Thread O-Ring Length **.5 (3.4) Typ..075 (1.9) Ref. Cable ntry (Table V) ** Length ±.060 (1.52) Min. Order Length 1.5 inch (See Note 3) STYL 2 (STRIT See Note 1) Typ..380 (9.7) Typ. K * L * M *.060 (1.5) Typ. * (Table V) (Table III) (Table III) F Termination rea Free of Cadmium. Knurl or Ridges Mfr's Option and Option (K Option Shown - Polysulfide Stripes See Note 6) P Option 05 lenair, Inc. C Code 063 LNIR, INC. 11 IR WY LNL, C FX Series 4 - Page -Mail: sales@glenair.com

2 4-031 MI/RFI anding and Shrink oot dapter irect Coupling - Standard Profile 4 See inside back cover fold-out or pages and for Tables I and II. Shell Size /09 /11 / /15 /17 /19 /21 /23 /25 /29 /33 TL III: FRONT PTR - Conn. esignator --F --L-S 1.6 (.9) 1.6 (.9) 1.6 (.9) 1.6 (.9) ---K C (44.1) ash No.(s) & & 04 & & & & & & (.1).781 (19.8).841 (21.4).866 (.0).893 (.7).9 (23.3) 1.4 (.8) 1.4 (.8) 1.5 (30.1) 1.5 (30.1) 1.5 (31.1) 1.5 (31.1) TL IV: LOW IMNSIONS F.9 (23.9).7 (.6).9 (23.9).7 (.6).757 (19.2) (26.7).781 (19.8).825 (21.0) 1.8 (30.2).896 (.8) 1.8 (30.7) (27.8) 1.8 (31.7) (.5) 1.3 (33.3) (.8) (34.9) (.8) (34.9) (37.8) (42.8) (37.8) (42.8) (39.1) 1.8 (46.0) (39.1) 1.8 (46.0) (27.4) (27.4) 1.8 (.1) 1.8 (.7) (29.9) (30.2) 1.3 (33.5) (35.1) 1.6 (41.1) 1.6 (41.1) ash No. K 01.5 (3.2) 31.8 (4.8) (6.4).3 (7.9) (9.5) (11.1) (.7).562 (.3).8 (.6).875 (.2).938 (23.8) 1.5 (.6) (34.9) (41.3) (47.6) (50.8) TL V: CL NTRY L.250 (6.4).3 (7.9).375 (9.5).438 (11.1).500 (.7).562 (.3).8 (.6).875 (.2).938 (23.8) 1.5 (.6) 1.8 (30.2) (34.9) (41.3) (47.6) (50.8) 2.5 (54.0) M.3 (7.9).374 (9.5).437 (11.1).500 (.7).562 (.3).6 (15.8).687 (17.4).8 (.6).874 (.2).937 (23.8) 1.4 (.5) 1.7 (30.1) 1.3 (33.3) (.5) (39.7) (42.8) 1.8 (46.0) (49.2) (52.4) 2.7 (55.5) Shrink oot S S S S S S S S S S S S S S S S S S S9 1. When maximum cable entry (page ) is exceeded, Style 2 will be supplied. (Function S only). 2. Metric dimensions (mm) are indicated in parentheses. 3. Consult factory for shorter lengths on straight backshells. 4. See page for Shrink oot Reference Information. 5. When using Connector esignator refer to pages and 19 for part number development. 6. ackshells supplied with * band, see lenair Series 600 Tool Catalog for installation. 05 lenair, Inc. C Code 063 LNIR, INC. 11 IR WY LNL, C FX Series 4 - Page 19 -Mail: sales@glenair.com

3 ow to Order Reference Information Standard Materials and Finishes LNIR SYMOL M85049 SYMOL RFRNC ONLY FINIS TL II - STNR FINISS SPCIFICTION(S) C* * LF M N NC NF T N W U Cadmium Plate, lack ZU** Cadmium Plate, lack ZN Zinc-Nickel lloy, Olive rab STM , Over 00 our Salt * nodize finish; not suitable for MI Shielding or grounding applications. Spray ** pplicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes. The following standard materials are used for the majority of lenair backshells and connector accessories. owever, backshell components are not limited to those items listed, but are representative of STNR MTRILS - CKSLLS N CCSSORIS MTRIL luminum COMPONNT Machined components: such as backshell bodies, fabricated elbows, protective covers, rotatable couplers, dummy stowage receptacles, lock nuts, -spring support rings, MI ground rings, grommet followers, etc. ie cast components: such as angular backshells, strain relief backshells, strain relief bodies, strain relief saddles, special MI ground rings, etc. ackshells or strain reliefs: available in optional corrosion resisting steel; and hardware: such as screws, washers, rivets, wire rope, sash chain, band straps, etc. lastomeric seals: such as O-rings, cable jacket seals, grommets, etc. nti-friction and thrust washers nti-rotation device OY STRP Cadmium Plate, right Cadmium Plate, Olive rab nodize, lack ard Coat, nodic Iridite, old Over Cadmium Plate Over Cadmium Plate, right Over Cadmium Plate, Olive rab Over Zinc Cobalt, ark Olive rab Cadmium Plate, Olive rab Over Cadmium Plate, right Over lenair offers an optional stainless steel body strap for attaching protective covers as illustrated. To specify body strap, add suffix letter C to the end of the part number. For example 0S001MM6C. MS-QQ-P-4, Type I, Class 2 MS--8625, Type II, Class 2 MS--8625, Type III, Class 1 MIL-C-5541, Class 3 MS-QQ-P-4, Type II, Class 3 over MS-C-26074, Class 4, rade 00 our Corrosion Resistance MS-C-26074, Class 4, rade over MS-C our Corrosion Resistance 00 our Corrosion Resistance MS-QQ-P-4, Type I, Class 3 STM , SC2, Type I, Class 5, MIL-C-26074*** the elements used in lenair's general accessory products. Contact lenair for applicable specifications on items not listed below. luminum Corrosion Resisting Steel Silicone Teflon Corrosion Resistant Material SPCIFICTION MS-QQ--0 STM1, 9 QQ--591 STM85, 26 STM582 (300 Series) MS-QQ-S-763 ZZ-R-765, MIL-R TF N/ NOTS On all length callouts, tolerance is ±.060 unless otherwise specified. Unless otherwise specified, the following other dimensional tolerances will apply:.xx = ±.03 (0.8).xxx = ±.015 (0.4) Lengths = ±.060 (1.52) ngles = ± 5 Metric dimensions (mm) are indicated in parentheses 2-56 Screw and Nut NOT: For your convenience these tables have been reproduced inside the back cover fold-out. 05 lenair, Inc. C Code 063 LNIR, INC. 11 IR WY LNL, C FX Mail: sales@glenair.com

4 lenair ackshell and ccessory Material and Finish Options ackshell and accessory base materials, plating options, specifications and codes Code Material Finish Finish Specification rs. Salt Spray lectrical Conductivity Operating Temp. Range luminum Cadmium, No Chromate S-MS-QQ-P-4 Type I Class 3 48 Conductive -65 to +175 C Not recommended for new projects. LF is preferred. Marine ronze Unplated 00 Conductive -65 to +0 C Marine and geophysical applications. L luminum lumiplate, Clear Chromate MIL-TL-83488, Class 2, Type II over electroless nickel 00 Conductive -65 to +175 C pproved for MIL-TL-38999L and MIL-TL-835. luminum Cadmium, Olive rab S-MS-QQ-P-4 Type II Class 3 96 Conductive -65 to +175 C Not recommended for new projects. NF is preferred. C luminum nodize, lack MS Type II Class 2 3 Non-Conductive -65 to +175 C lenair s standard black anodize finish. luminum Chem Film MIL-TL-5541 Type 1 Class 3 8 Conductive -65 to +175 C lenair s standard chem film finish. luminum nodize, ardcoat MS Type III, Class 1,.001" thick 3 Non-Conductive -65 to +0 C lenair s preferred hardcoat finish. luminum Cadmium, old S-MS-QQ-P-4 Type II, Class 2 over electroless nickel 500 Conductive -65 to +175 C Not recommended for new projects. F is preferred. F luminum Cadmium, old S-MS-QQ-P-4 Type II, Class 2 over electroless nickel 00 Conductive -65 to +175 C lenair s preferred gold cadmium finish. LF luminum Cadmium, Clear S-MS-QQ-P-4 Type II Class 2 over electroless nickel 00 Conductive -65 to +175 C lenair s preferred clear cadmium finish. M luminum MS-C Class 4 rade ; STM--733, SC 2, Type IV 48 Conductive -65 to +0 C lenair s standard electroless nickel finish. MT luminum Nickel-PTF MF-002 Type II Class 1 00 Conductive -65 to +175 C pproved for MIL-TL-38999L and MIL-TL-835. N luminum Cadmium, Olive rab S-MS-QQ-P-4 Type II Class 3 over electroless nickel 500 Conductive -65 to +175 C Not recommended for new projects. NF is preferred. NC luminum Zinc-Cobalt, Olive rab STM 8 rade 6 Type over electroless nickel 350 Conductive -65 to +175 C lenair s standard olive drab zinc-cobalt finish. NF luminum Cadmium, Olive rab S-MS-QQ-P-4 Type II Class 2 over electroless nickel 00 Conductive -65 to +175 C lenair s standard olive drab cadmium finish. P Stainless Steel lectrodeposited Nickel S-MS-QQ-N-290 Class 1 rade F 500 Conductive -65 to +0 C Use ZM for electroless nickel alternative. T luminum Cadmium, No Chromate S-MS-QQ-P-4 Type I Class 3 48 Conductive -65 to +175 C Not recommended for new projects. LF is preferred. TP2 Titanium lectrodeposited Nickel S-MS-QQ-N-290 Class 1 rade F 96 Conductive -65 to +0 C lenair s preferred finish for titanium connectors. U luminum Cadmium, lack S-MS-QQ-P-4 Type I Class 3 48 Conductive -65 to +175 C Not recommended for new projects. UF is preferred. UC luminum Zinc-Cobalt, lack STM 8 rade 6 Type over electroless nickel 350 Conductive -65 to +175 C lenair s standard black zinc-cobalt finish. UCR luminum Zinc-Cobalt, lack STM 8 rade 6 Type over electroless nickel 350 Conductive -65 to +175 C RoS version of UC. UF luminum Cadmium, lack S-MS-QQ-P-4 Type II Class 2 over electroless nickel 00 Conductive -65 to +175 C lenair s preferred black cadmium finish. XL Composite lumiplate MIL-TL-86448, Class 2, Type II over electroless nickel 00 Conductive -65 to +175 C pproved for MIL-TL-38999L. X Composite Unplated lack 00 Non-Conductive -65 to +175 C lenair s standard unplated composite. XM Composite MS-C Conductive -65 to +175 C lenair s standard electroless nickel finish over composite. XMT Composite Nickel-PTF MS-002 Class 2 Type II 00 Conductive -65 to +175 C pproved for MIL-TL-38999L. XO Composite Unplated Light rown 00 Non-Conductive -65 to +175 C Not recommended for new projects. Use X. XW Composite Cadmium, Olive rab S-MS-QQ-P-4 Type II Class 3 over electroless nickel 00 Conductive -65 to +175 C lenair s standard olive drab cadmium finish over composite. XZN Composite Zinc-Nickel, lack STM 841 rade 5 over electroless nickel 00 Conductive -65 to +175 C lenair s standard black zinc-nickel finish over composite. Z1 Stainless Steel Passivate S-MS-S-MS-QQ-P-35 Type VI 00 Conductive -65 to +0 C lenair s standard passivated stainless steel. Z2 luminum old MIL-TL-454 Class 1 over electroless nickel 48 Conductive -65 to +0 C lenair s standard gold plating for space programs. ZC Stainless Steel Zinc-Cobalt, lack STM-8, rade 6 Conductive -65 to +175 C lenair s standard zinc-cobalt over stainless steel. ZCR Stainless Steel Zinc-Cobalt, lack STM-8, rade 6 Conductive -65 to +175 C RoS version of ZC. ZL Stainless Steel lectrodeposited Nickel S-MS-QQ-N-290 Class 1 rade F 00 Conductive -65 to +0 C Used on hermetic connectors. Use ZM for other applications. ZM Stainless Steel MS-C Class 1 rade Conductive -65 to +0 C lenair s preferred nickel-plated stainless steel. ZMT Stainless Steel Nickel-PTF MF-002 Type II Class 3 00 Conductive -65 to +175 C lenair s new 00 our rey over stainless steel. ZN luminum Zinc-Nickel, Olive rab STM 841 rade 5 over electroless nickel 00 Conductive -65 to +175 C lenair s standard olive drab zinc-nickel finish. ZNU luminum Zinc-Nickel, lack STM 841 rade 5 over electroless nickel 00 Conductive -65 to +175 C lenair s standard black zinc-nickel finish. ZR luminum Zinc-Nickel, lack STM 841 rade 5 over electroless nickel 500 Conductive -65 to +175 C lenair s Ros compliant black zinc-nickel. ZU Stainless Steel Cadmium, lack S-MS-QQ-P-4 Type II Class 3 00 Conductive -65 to +175 C lenair s standard black cadmium over stainless steel. ZW Stainless Steel Cadmium, Olive rab S-MS-QQ-P-4 Type II Class 2 over electroless nickel 00 Conductive -65 to +175 C lenair s standard olive drab cadmium over stainless steel. Notes

5 03 [7] [] [19] [27] [37] C* TL I - CKSLL INTRFC IMNSIONS CONNCTOR SINTOR F K L S [9].590 (15.) 09 [] [] [11] 11.7 (.3) 11 [] [] [] [].8 (21.3) [C].890 (.6) 11 [] [15].970 (.6) [15].970 (.6) 15 [] (26.2) [] [17] (27.7) [] (26.2) [17] (27.7) 17 [] 15 [C] 1.0 (29.2) [] [19] 1.0 (31.0) 19 [F] 1.0 (.5) 17 [] 1.3 (34.0) [F] 1.0 (.5) [21] 1.3 (34.0) 21 [] 1.4 (35.8) 19 [] (37.3) [] 1.4 (35.8) [23] ( [] (.4) [] [25] 23 [F] (.4) 25 [] [] 25 [] 29 [] 33 [] * Code C, MIL-C-992, Left-and Thread. Connector designations depicted thus [ ] are for reference only and are not to be used in part number development. CKSLL INTRFC STNRS (See pages for more information) SI. SPC. SRIS SI. SPC. SRIS SI. SPC. SRIS SI. SPC. MIL-TL-5015 MS30 MIL-TL PTT 602 MIL-TL-5015 MS30 MIL-C-8 MIL-TL III & IV L N3372 N 03 S C MIL-C-992 MS173XX N45 LN MIL-TL I & III M39569 MIL-TL MIL-TL luminum MIL-C V959 1, 2, 3 & 4 NFC934 PN F 56-3 N 2997, 46 F MIL-TL I & II M38277 K MIL-TL I PTT 615 V 969 SC, 11 LN NFC PN PTT 6 PTT 6 S PTT 5 PTT 603 PTT 6 PN 64-1, -2 NFC934 3, 9 TR* RFRNC 7/ UNF M x 1 6 1/2 UNF 1/2 UNF 9/ UNF M15 x 1 6 5/8 UNF 5/8 UN 11/ UNF M x 1 6 3/4 UNF / UNF M x 1 6 7/8 UNF 7/8 UN 15/ UNF M25 x UNF 1 - UN 1 1/ UNF M x /8 UNF 1 1/8 UN 1 3/ UNF M31 x /4 UNF UN 1 5/ UNF M34 x /8 UNF 1 3/8 UN 1 7/ UNF M37 x /2 UNF 1 1/2 UN 1 9/ UNF 1 5/8 UNF 1 3/4 UNS 1 7/8 UN 2 UNS 2 1/ UNS 2 1/8 UN 2 1/4 UN 2 5/ UNS 2 3/8 UN 2 1/2 UN 2 5/8 UN 2 3/4 UN 2 7/8 UN 3 UN 3 1/ UN 1.8 (46.7) (50.0) (53.1) 2.0 (57.9) 2.3 (59.4) 2.3 (59.4) (64.3) (65.8) (65.8) (70.6) 2.9 (73.9) (77.0) 3.0 (80.3) 3.0 (81.8) 3.4 (86.6) C.8 (.8).890 (.6).890 (.6).9 (23.9).9 (23.9) 1.0 (29.2) (26.2) 1.0 (25.9) 1.2 (30.7) 1.2 (30.7) 1.0 (34.5) (31.2) 1.0 (34.5) 1.0 (34.5) 1.0 ( (.6) (.6) (43.9) (43.9) (43.2) (42.4) 1.9 (49.3) 1.8 (46.2) (50.0) 2.0 (56.4) 2.4 (62.0) 2.47 (62.7) 2.7 (69.1) (75.4) 3.0 (81.8).890 (.6).890 (.6) 1.0 (25.9) 1.0 (25.9) (.0) (31.2) 1.0 (35.6) 1.0 (34.5) (.6) (.6) 1.9 (49.3) 1.9 (49.3) 2.4 (62.0) 2.4 (62.0) (68.3) (68.3) (74.4).690 (17.5).9 (.8).690 (17.5).8 (.8).8 (.8).9 (23.8).9 (23.8) (.7) 1.4 (.1) (.7) 1.5 (39.1) 1.4 (.0) (42.4) 1.5 (39.1) 2.0 (51.1) 2.0 (53.8) 2.0 (51.1) (57.4) (64.3) 3.0 (77.2) SRIS 306 ow to Order