A-F-H-L-S ROTATABLE COUPLING TYPE B INDIVIDUAL AND/OR OVERALL SHIELD TERMINATION

Transcription

1 I/RFI on-nvironmental ackshell with Strain Relief ype - Rotatable oupling - ow Profile OOR SIGORS I Series I, II (F) I Series III and IV (H) -F-H--S RO OPIG YP IIVI /OR OVR SHI RIIO R hread yp (able I) Product Series 380 F 115 F 15 6 onnector esignator H S - Straight asic umber ength (See ote 2) Finish ash o. Shell Size.880 (.35) Strain Relief Style (H,,, ) ength: S Only (1/2 inch increments e.g. 6 = 3 inches) ength (See ote 2) Sym - 90 S yp (able I) Knurl Style fr Sym S - Straight Style II 45 & 90 (See ote 3) Style II Straight (See ote 3) F O Sym - 90 Sym H - 45 O Sym - 45 SY H Heavy uty (able VI) SY edium uty (able V) SY edium uty (able V) K SY edium uty (able V).135 (3.43) Glenair P Glenair 05 Glenair, Inc. G ode 063 Printed in.s.. GIR, I. 11 IR WY G, FX Series 38 - Page -ail: sales@glenair.com

2 I/RFI on-nvironmental ackshell with Strain Relief ype - Rotatable oupling - ow Profile 38 III: OW ISIOS Shell Size F R S F,,S H (.7) (42.8) 457 (11.6) (42.5).9 (23.11) 1.9 (48.77).780 (19.81) (45.21) (15.1) (45.8).5 (13.2) (44.0).970 (.64) (50.04).8 (.57) 1.8 (45.97) 13.6 (15.5) 1.8 (46.3).582 (.8) (45.6) (26.16) (50.56).830 (21.) (46.48) (17.8) (48.1).645 (16.4) (47.9) (27.68) (53.09).850 (21.59) (46.99) (.5) (50.4).738 (.7) (50.6) ( (54.61).880 (.35) (47.75) (.8) (54.7).926 (23.5) 2.4 (55.5) 1.0 (30.48) 2.0 (55.88).900 (.86) (48.26) (.8) (54.7).926 (23.5) 2.4 (55.5) (.26) (57.66).930 (23.62) (49.02) (.6) (57.5) 1.0 (25.9) (59.3) (33.78) (59.).950 (.13) (49.53) (.6) (57.5) 1.0 (25.9) (59.3) (35.31) (60.71).980 (.13) (50.29) 1.5 (31.1) (61.8) 1.5 (29.1) (60.6) (37.) (62.48) (29.21) (54.61) (.0) (68.2) 1.7 (30.7) (63.1) (.38) (65.79) 1.2 (30.73) 2.2 (56.13) (45.1) (68.2) (31.4) (65.4) (42.93) (68.33) 1.0 (31.50) 2.0 (56.90) / / / / (48.26) 2.0 (55.88) (31.75) (.38) 44 / / / / (51.56) 2.0 (59.94) (33.02) 1.6 (41.65) 48 / / / / 2.0 (53.37) (64.26) (34.79) 1.7 (43.68) 61 / / / / (.76) (37.85).880 (.35) 1.0 (27.94) ash o. IV: P RG P in (19.8).957 (.3).5 (3.2).3 (7.9) (19.8) 1.5 (29.1).250 (6.4).437 (11.1).780 (19.8) 1.3 (33.8).3 (7.9).562 (.3).780 (19.8) 1.3 (33.8).350 (8.9).625 (15.9).811 (.6) (39.4).500 (.7).750 (19.1) (23.0) (45.0).625 (15.9).937 (23.8) (27.7) (53.7).875 (.2) (31.8) 1.1 (.5) 2.3 (60.0) (25.4) (34.9) (35.5) (70.4) (31.8) (41.3) (35.5) 3.0 (76.7) (.5) (47.6) II: FIISHS Sym Finish admium Plate, Olive rab * nodize, lack G* Hard oat, nodic Gold Iridite over admium Plate over ickel admium Plate, right over F admium Plate, Olive rab over ickel Zinc obalt, ark Olive rab ad/o.. over F (00 Hr. Salt Spray) admium Plate, right ip over ickel ** admium Plate, lack Z1** Z Zinc obalt, lack Passivate Zinc ickel, Olive rab V: P RG ash K o. in** 03*.437 (11.1).760 (19.3).843 (21.4).630 (16.0).156 (4.0).250 (6.4) 04*.437 (11.1).760 (19.3).906 (23.0).755 (19.2).8 (4.8).3 (7.9) 06*.500 (.7).760 (19.3) (27.8).942 (23.9).1 (7.1).438 (11.1).563 (.3).760 (19.3) 1.7 (30.1) (27.1).344 (8.7).562 (.3).563 (.3).760 (19.3) 1.1 (.5) (30.3).375 (9.5).625 (15.9).563 (.3).760 (19.3) (38.1) (35.1).438 (11.1).750 (19.1) (16.7) (27.3) (43.7) (39.0).562 (.3).938 (23.8).656 (16.7) 1.3 (33.6) (52.4) (46.9).750 (19.1) (31.8).656 (16.7) 1.3 (33.6) 2.3 (58.7) (57.3).781 (19.8) (34.9) 1.8 (30.2) (39.9) (69.1) (63.6).969 (.6) (41.3) * 1.7 (30.1) (39.9) (75.4) (70.0) 1.5 (.6) (47.6) * 1.5 (.6) (39.9) (89.7) (82.7) (37.3) (60.3) * ot available in Style clamp. ** ot pplicable Style 1. PPIIO OS part number, space permitting. 2. Standard minimum length for Style I is inches, Style II standard length is inches.for shorter lengths consult factory. ppklies to Symbol S only. 3. When cable range exceeds ntry shown in able IV, Style II will be supplied. ote:,,, F, R, S, and dimensions do not apply to Style II. 4. etric dimensions are in parentheses. 5. For effective grounding, connector with conductive 6. Glenair Series 600 ackshell ssembly ools are recommended for assembly and installation. 7. aterial/finish: lbow, adapter, coupling nut, ferrules and clamp - luminim alloy or SS/able II. Hardware - RS/Passivate 8. ngular functions and are currently not available in shell sizes, 44 and 61. onsult factory for suitable alternatives. 05 Glenair, Inc. G ode 063 Printed in.s.. GIR, I. 11 IR WY G, FX Series 38 - Page 21 -ail: sales@glenair.com

3 03 [7] [] 16 [19] 16 [27] [37] * I - KSH IRF ISIOS OOR SIGOR F G H K S I X [9].590 (15.) 09 [] [] [11] 11.7 (.3) 11 [] [13] [] [13].8 (21.3) 13 [].890 (.6) 11 [] [15].970 (.6) [15].970 (.6) 15 [] (26.2) 13 [] 16 [17] (27.7) [] (26.2) 16 [17] (27.7) 17 [] 15 [] 1.0 (29.2) 16 [] [19] 1.0 (31.0) 19 [F] 1.0 (.5) 17 [] 1.3 (34.0) [F] 1.0 (.5) [21] 1.3 (34.0) 21 [G] 1.4 (35.8) 19 [] (37.3) [G] 1.4 (35.8) [23] ( [H] (.4) [H] [25] 23 [F] (.4) 25 [] [] [G] 29 [H] 33 [] * ode, I--992, eft-hand hread. onnector designations depicted thus [ ] are for reference only and are not to be used in part number development. KSH IRF SRS (See pages for more information) SIG. SP. SRIS SIG. SP. SRIS SIG. SP. SRIS SIG. SP. I S30 I P 602 I S30 G H I--8 I III & IV S I--992 S173XX I I & III I I luminum I VG959 1, 2, 3 & 4 F934 P F , 46 F I I & II K I I P 615 VG 969 S, F934 H302 P P 6 P 616 S P 5 P 603 P 6 P 64-1, -2 F934 H3, 9 13 HR* RFR 7/16 F x 1 6H 1/2 F 1/2 F 9/16 F 15 x 1 6H 5/8 F 5/8 11/16 F x 1 6H 3/4 F 13/16 F x 1 6H 7/8 F 7/8 15/16 F 25 x 1 6H 1 F 1-1 1/16 F x 1 6H 1 1/8 F 1 1/8 1 3/16 F 31 x 1 6H 1 1/4 F /16 F 34 x 1-6H 1 3/8 F 1 3/8 1 7/16 F 37 x 1 6H 1 1/2 F 1 1/2 1 9/16 F 1 5/8 F 1 3/4 S 1 7/ S 2 1/16 16 S 2 1/ / /16 16 S 2 3/ / / / / / (46.7) (50.0) (53.1) 2.0 (57.9) 2.3 (59.4) 2.3 (59.4) (64.3) (65.8) (65.8) (70.6) 2.9 (73.9) (77.0) (80.3) 3.0 (81.8) 3.4 (86.6) I X.8 (.8).890 (.6).890 (.6).9 (23.9).9 (23.9) 1.0 (29.2) (26.2) 1.0 (25.9) 1.2 (30.7) 1.2 (30.7) (31.2) 1.0 ( (43.9) (43.9) (43.2) (42.4) 1.8 (46.2) (50.0) (55.6) 2.0 (56.4) 2.47 (62.7) 2.7 (69.1) (75.4) 3.0 (81.8) I X.890 (.6).890 (.6) 1.0 (25.9) 1.0 (25.9) (.0) (31.2) 1.0 (35.6) (55.6) (68.3) (68.3) (74.4) I X.690 (17.5).9 (.8).690 (17.5).8 (.8).8 (.8).9 (23.8).9 (23.8) (.7) 1.4 (.1) (.7) 1.5 (39.1) 1.4 (.0) (42.4) 1.5 (39.1) 2.0 (51.1) 2.1 (53.8) 2.0 (51.1) (57.4) (64.3) 3.0 (77.2) SRIS H306 How to Order

4 How to Order Reference Information Standard aterials and Finishes GIR SYO SYO RFR OY FIISH II - SR FIISHS SPIFIIO(S) * G* F F W admium Plate, lack S-QQ-P-416, ype II, lass 3 Z** admium Plate, lack S-QQ-P-416, ype II, lass 3 Z Zinc-ickel lloy, Olive rab S , Over 00 Hour Salt * nodize finish; not suitable for I Shielding or grounding applications. Spray ** pplicable to corrosion resisting steel backshells and accessories. onsult factory for other available finishes. he following standard materials are used for the majority of Glenair backshells and connector accessories. However, backshell components are not limited to those items listed, but are representative of SR RIS - KSHS SSORIS RI luminum OPO achined components: such as backshell bodies, fabricated elbows, protective covers, rotatable couplers, dummy stowage receptacles, lock nuts, G-spring support rings, I ground rings, grommet followers, etc. ie cast components: such as angular backshells, strain relief backshells, strain relief bodies, strain relief saddles, special I ground rings, etc. ackshells or strain reliefs: available in optional corrosion resisting steel; and hardware: such as screws, washers, rivets, wire rope, sash chain, band straps, etc. lastomeric seals: such as O-rings, cable jacket seals, grommets, etc. nti-friction and thrust washers nti-rotation device OY SRP admium Plate, right admium Plate, Olive rab nodize, lack Hard oat, nodic Iridite, Gold Over admium Plate Over admium Plate, right Over admium Plate, Olive rab Over Zinc obalt, ark Olive rab admium Plate, Olive rab Over admium Plate, right Over Glenair offers an optional stainless steel body strap for attaching protective covers as illustrated. o specify body strap, add suffix letter to the end of the part number. For example 0S S-QQ-P-416, ype I, lass 2 S-QQ-P-416, ype II, lass 3 S--8625, ype II, lass 2 S--8625, ype III, lass 1 I--5541, lass 3 S-QQ-P-416, ype II, lass 3 over S , lass 4, Grade 00 Hour orrosion Resistance S , lass 4, Grade S-QQ-P-416, ype II, lass 3 over S Hour orrosion Resistance 00 Hour orrosion Resistance S-QQ-P-416, ype I, lass 3 S , S2, ype I, lass 5, I *** the elements used in Glenair's general accessory products. ontact Glenair for applicable specifications on items not listed below. luminum orrosion Resisting Steel Silicone eflon orrosion Resistant aterial SPIFIIO S-QQ--0 S1, 9 QQ--591 S85, 26 S582 (300 Series) S-QQ-S-763 ZZ-R-765, I-R F / OS On all length callouts, tolerance is ±.060 unless otherwise specified. nless otherwise specified, the following other dimensional tolerances will apply:.xx = ±.03 (0.8).xxx = ±.015 (0.4) engths = ±.060 (1.52) ngles = ± 5 etric dimensions (mm) are indicated in parentheses 2-56 Screw and ut O: For your convenience these tables have been reproduced inside the back cover fold-out. 05 Glenair, Inc. G ode 063 Printed in.s.. GIR, I. 11 IR WY G, FX ail: sales@glenair.com

5 Glenair ackshell and ccessory aterial and Finish Options ackshell and accessory base materials, plating options, specifications and codes ode aterial Finish Finish Specification Hrs. Salt lectrical Operating emp. Spray onductivity RoHS otes luminum admium, o hromate S-S-QQ-P-416 ype I lass 3 48 onductive -65 to +175 ot recommended for new projects. F is preferred. arine ronze nplated 00 onductive -65 to +0 arine and geophysical applications. luminum lumiplate, lear hromate I , lass 2, ype II over electroless nickel 00 onductive -65 to +175 pproved for I and I G. luminum admium, Olive rab S-S-QQ-P-416 ype II lass 3 96 onductive -65 to +175 ot recommended for new projects. F is preferred. luminum nodize, lack S ype II lass 2 3 on-onductive -65 to +175 Glenair s standard black anodize finish. luminum hem Film I ype 1 lass onductive -65 to +175 Glenair s standard chem film finish. G luminum nodize, Hardcoat S ype III, lass 1,.001" thick 3 on-onductive -65 to +0 Glenair s preferred hardcoat finish. luminum admium, Gold S-S-QQ-P-416 ype II, lass 2 over electroless nickel 500 onductive -65 to +175 ot recommended for new projects. F is preferred. F luminum admium, Gold S-S-QQ-P-416 ype II, lass 2 over electroless nickel 00 onductive -65 to +175 Glenair s preferred gold cadmium finish. F luminum admium, lear S-S-QQ-P-416 ype II lass 2 over electroless nickel 00 onductive -65 to +175 Glenair s preferred clear cadmium finish. luminum S lass 4 Grade ; S--733, S 2, ype IV 48 onductive -65 to +0 Glenair s standard electroless nickel finish. luminum ickel-pf GF-002 ype II lass 1 00 onductive -65 to +175 pproved for I and I G. luminum admium, Olive rab S-S-QQ-P-416 ype II lass 3 over electroless nickel 500 onductive -65 to +175 ot recommended for new projects. F is preferred. luminum Zinc-obalt, Olive rab S 8 Grade 6 ype over electroless nickel 350 onductive -65 to +175 Glenair s standard olive drab zinc-cobalt finish. F luminum admium, Olive rab S-S-QQ-P-416 ype II lass 2 over electroless nickel 00 onductive -65 to +175 Glenair s standard olive drab cadmium finish. P Stainless Steel lectrodeposited ickel S-S-QQ--290 lass 1 Grade F 500 onductive -65 to +0 se Z for electroless nickel alternative. luminum admium, o hromate S-S-QQ-P-416 ype I lass 3 48 onductive -65 to +175 ot recommended for new projects. F is preferred. P2 itanium lectrodeposited ickel S-S-QQ--290 lass 1 Grade F 96 onductive -65 to +0 Glenair s preferred finish for titanium connectors. luminum admium, lack S-S-QQ-P-416 ype I lass 3 48 onductive -65 to +175 ot recommended for new projects. F is preferred. luminum Zinc-obalt, lack S 8 Grade 6 ype over electroless nickel 350 onductive -65 to +175 Glenair s standard black zinc-cobalt finish. R luminum Zinc-obalt, lack S 8 Grade 6 ype over electroless nickel 350 onductive -65 to +175 RoHS version of. F luminum admium, lack S-S-QQ-P-416 ype II lass 2 over electroless nickel 00 onductive -65 to +175 Glenair s preferred black cadmium finish. X omposite lumiplate I , lass 2, ype II over electroless nickel 00 onductive -65 to +175 pproved for I X omposite nplated lack 00 on-onductive -65 to +175 Glenair s standard unplated composite. X omposite S onductive -65 to +175 Glenair s standard electroless nickel finish over composite. X omposite ickel-pf GS-002 lass 2 ype II 00 onductive -65 to +175 pproved for I XO omposite nplated ight rown 00 on-onductive -65 to +175 ot recommended for new projects. se X. XW omposite admium, Olive rab S-S-QQ-P-416 ype II lass 3 over electroless nickel 00 onductive -65 to +175 Glenair s standard olive drab cadmium finish over composite. XZ omposite Zinc-ickel, lack S 841 Grade 5 over electroless nickel 00 onductive -65 to +175 Glenair s standard black zinc-nickel finish over composite. Z1 Stainless Steel Passivate S-S-S-S-QQ-P-35 ype VI 00 onductive -65 to +0 Glenair s standard passivated stainless steel. Z2 luminum Gold I--454 lass 1 over electroless nickel 48 onductive -65 to +0 Glenair s standard gold plating for space programs. Z Stainless Steel Zinc-obalt, lack S-8, Grade 6 onductive -65 to +175 Glenair s standard zinc-cobalt over stainless steel. ZR Stainless Steel Zinc-obalt, lack S-8, Grade 6 onductive -65 to +175 RoHS version of Z. Z Stainless Steel lectrodeposited ickel S-S-QQ--290 lass 1 Grade F 00 onductive -65 to +0 sed on hermetic connectors. se Z for other applications. Z Stainless Steel S lass 1 Grade onductive -65 to +0 Glenair s preferred nickel-plated stainless steel. Z Stainless Steel ickel-pf GF-002 ype II lass 3 00 onductive -65 to +175 Glenair s new 00 Hour Grey over stainless steel. Z luminum Zinc-ickel, Olive rab S 841 Grade 5 over electroless nickel 00 onductive -65 to +175 Glenair s standard olive drab zinc-nickel finish. Z luminum Zinc-ickel, lack S 841 Grade 5 over electroless nickel 00 onductive -65 to +175 Glenair s standard black zinc-nickel finish. ZR luminum Zinc-ickel, lack S 841 Grade 5 over electroless nickel 500 onductive -65 to +175 Glenair s RoHs compliant black zinc-nickel. Z Stainless Steel admium, lack S-S-QQ-P-416 ype II lass 3 00 onductive -65 to +175 Glenair s standard black cadmium over stainless steel. ZW Stainless Steel admium, Olive rab S-S-QQ-P-416 ype II lass 2 over electroless nickel 00 onductive -65 to +175 Glenair s standard olive drab cadmium over stainless steel.