COMBICLICK Fibre Discs with Patented Cooling and Quick-Mounting System

Transcription

1 COMBICLICK Fibre iscs with Patented Cooling and Quick-Mounting System COOL QUICK COMBICLICK Reduction of the thermal load of tool and workpiece Very high stock removal rate and tool life Smooth grinding from coarse to fine GERMAN FEERAL AWAR FOR OUTSTANING INNOVATION PRESENTE ON THE OCCASION OF THE INTERNATIONAL CRAFTS FAIR, MUNICH

2 COMBICLICK Fibre iscs General Information PFER presents a newly developed, patented quick-mounting and cooling system for use with fibre discs. Our COMBICLICK system combines an innovative flexible backing pad with a rugged mounting system at the back of the disc. The new backing pad allows COMBICLICK fibre discs to be used with standard angle grinders. The geometry of the cooling slots ensures a high throughput of air, thus significantly reducing thermal loads on the abrasive material and workpiece. The rugged mounting fixture, secure disc attachment to the backing pad plus optimized cooling help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer service life and improved utilization of abrasive product and up to 30% less tool wear. Reduce process costs and workpiece temperature Up to 25% less process costs Up to 30% lower workpiece temperature Before Improved stock removal and tool life +25 % -25 % -30 % New +30 % GERMAN FEERAL AWAR FOR OUTSTANING INNOVATION PRESENTE ON THE OCCASION OF THE INTERNATIONAL CRAFTS FAIR, MUNICH Before New Before New Up to 25% higher stock removal Up to 30% longer tool life User benefits: System Mounting principle Cooling effect Exceptional ease of handling and convenience. Flexible grinding Extremely easy and fast tool change reduces Very good cooling of the tool and workpiece. process costs. COMBICLICK supports grinding at very flat angles! min. 15 min. 3 give a particularly soft and flexible abrasive performance in face grinding. Before Application with COMBICLICK The COMBICLICK system eliminates surface scratching due to projecting metal parts and maximizes abrasive grit usage. 2

3 COMBICLICK Fibre iscs General Information Safety recommendations The maximum permitted peripheral is 80 m/s. = Wear eye protection! = Wear a respirator! PFER offers a wide range of COMBICLICK fiber discs in various grit sizes, abrasives and dimensions. Our comprehensive product range provides the optimum tool from coarse to fine grinding. Advantages Long tool life Uniform surface finish Extremely high stock removal High flexibility Excellent grit adhesion = Wear hearing protection! = Only permitted with a backing pad! = Read the instructions! = Not permitted for wet grinding! Application examples Working on welds eburring of steel components Rough grinding work Fine grinding of stainless steel components (INOX) Removal of mill and casting skins For work on narrow, hard-to-reach places (e.g. cooling ribs) Recommendations for use are used in combination with the COMBICLICK backing pad on standard commercial angle grinders. The use of the appropriate grinding oil on the different materials can substantially increase tool life and abrasive performance of the tools made from coated abrasives. Extensive information and ordering data on grinding oils can be found in the PFER Tool Manual, catalogue 204. Ordering note Please order COMBICLICK backing pad as a separate item. For detailed information and order data regarding backing pads, refer to page 6. Application recommendations for use of Material groups Abrasive Alum. A Steel, cast steel Non-hardened, non heat-treated steels Hardened, heattreated steels Construction steels, carbon steels, tool steels, non-alloyed steels, cast steels Tool steels, tempering steels, alloyed steels, cast steels Alum. A-COOL Zirconia alum. Z Zirconia alum. Z-COOL Ceramic CO Ceramic CO-COOL Stainless steel (INOX) Non-ferrous metals Rust and acidresistant steels Soft non-ferrous metals Hard non-ferrous metals High-temperature resistant materials Austenitic and ferritic stainless steels Soft alu-alloys Brass, copper, zinc Hard alu-alloys Bronze, titanium Nickel based alloys, cobalt based alloys Cast iron Grey cast iron, white cast iron Cast iron with flake graphite EN-GJL, with nodular graphite cast iron EN-GJS, white annealed cast iron EN-GJMW, black cast iron EN-GJMB Plastics and other materials Plastics, wood, paint Fibre reinforced plastics, thermoplastics, wood, chipboard, paint = highly suitable = suitable 3

4 COMBICLICK Fibre iscs COMBICLICK Fibre iscs For general-purpose grinding work from coarse to fine grinding in industry and crafts. Abrasive: Aluminium A CC-FS 180 A = ia. A = Aluminium A Aluminium A type Order No. Grit size ia. CC-FS 115 A CC-FS 125 A CC-FS 180 A For coarse grinding with high stock removal and long tool life. The high-performance abrasive zirconia aluminia performs best on high-performance angle grinders with increased grinding pressure. Abrasive: Zirconia alumina Z CC-FS 180 Z = ia. Z = Zirconia alumina Z Zirconia alumina Z type Order No. Grit size ia. CC-FS 115 Z CC-FS 125 Z CC-FS 180 Z For aggressive grinding with maximum stock removal and excellent tool life. The ceramic grit is especially designed for work on hard materials and coatings. It is most effective when used with high-performance angle grinders. Abrasive: Ceramic CO CC-FS 180 CO = ia. CO = Ceramic CO Ceramic CO type Order No. Grit size ia. CC-FS 115 CO CC-FS 125 CO CC-FS 180 CO

5 COMBICLICK Fibre iscs COMBICLICK Fibre iscs For general-purpose grinding work from fine to finest grinding of poorly heat-conducting materials. Grinding additives in the coating clearly improve stock removal, prevent clogging and allow cooler grinding. Abrasive: Aluminium A-COOL CC-FS 180 A-COOL = ia. A = Aluminium A COOL = Bond Aluminium A-COOL type Order No. Grit size ia CC-FS 115 A-COOL CC-FS 125 A-COOL CC-FS 180 A-COOL For coarse grinding work; high stock removal with cool grinding. The high-performance abrasive zirconia alumina grinds best on high-performance angle grinders with increased grinding pressure. Grinding additives in the coating clearly improve stock removal, prevent clogging and result in cooler grinding of materials which do not conduct heat well. Abrasive: Zirconia aluminia Z-COOL CC-FS 180 Z-COOL = ia. Z = Zirconia alumina Z COOL = Bond Zirconia alumina Z-COOL type Order No. Grit size ia CC-FS 125 Z-COOL CC-FS 180 Z-COOL For highly-abrasive grinding with maximum stock removal on hard materials which do not conduct heat well. Grinding additives in the coating clearly improve stock removal, prevent clogging and result in cooler grinding. Abrasive: Ceramic CO-COOL CC-FS 180 CO-COOL = ia. CO = Ceramic CO COOL = Bond Ceramic CO-COOL type Order No. Grit size ia. CC-FS 115 CO-COOL CC-FS 125 CO-COOL CC-FS 180 CO-COOL

6 COMBICLICK Fibre iscs COMBICLICK Backing Pads COMBICLICK backing pads This backing pad permits the use of on all common angle grinders. The cooling slot geometry ensures a high throughput of air, thus significantly reducing thermal loads of the abrasive material and workpiece. The patented COMBICLICK mounting system minimizes tool changing times. Order No. EAN Safety note: The maximum permitted peripheral is 80 m/s. Thread Suitable for Suitable for machine types CC-GT M M14 CC-FS 115, CC-FS 125 Angle grinders 115 and 125 with M 14 spindle CC-GT / /8 CC-FS 115, CC-FS 125 Angle grinders 115 and 125 with 5/8 spindle CC-GT 180 M M14 CC-FS 180 Angle grinder with M 14 spindle CC-GT 180 5/ /8 CC-FS 180 Angle grinder with 5/8 spindle /2011 Subject to technical modifications. Printed in Germany. The original PFER Tool Manual! With more information on fine grinding tools and more than 7,500 innovative solutions for surface processing and cutting materials. Request your own free personal copy at info@pferd.com PFER quality certified according to EN ISO 9001.