Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Transcription

1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Period of validity: to Holder of certificate: Buderus Edelstahl GmbH Mechanisches Prüflabor / Metallographie Buderusstraße 25, Wetzlar Tests in the fields: mechanical tests and metallographic examinations at metallic materials Abbreviations used: see last page The testing laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use standards or equivalent testing methods listed here with different issue dates. The testing laboratory maintains a current list of all testing methods within the flexible scope of accreditation. 1 Mechanical tests 1.1 Tensile testing DIN EN ISO DIN EN ISO DIN EN ISO Metallic materials - Tensile testing - Part 1: Method of test at room temperature Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature Metallic materials - Tensile testing - Part 3: Method of test at low temperature This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/5

2 DIN EN DIN EN ASTM E 8 / E 8Ma ASTM E Metallic materials - Tensile testing - Part 1: Method of testing at ambient temperature Tensile testing of metallic materials; method of testing at elevated temperature Standard Test Methods for Tension Testing of Metallic Materials Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials 1.2 Hardness testing DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO ASTM E 10 ASTM E 18 ASTM E 92 Steel - Hardenability test by end quencing (Jominy test) Steels - Determination and verification of the depth of carburized and hardened cases Metallic materials - Brinell hardness test - Part 1: Test method Metallic materials - Vickers hardness test - Part 1: Test method Metallic materials - Rockwell hardness test - Part 1: Test method Standard Test Method for Brinell Hardness for Metallic Materials Standard Test Method for Rockwell Hardness for Metallic Materials Standard Test Method for Vickers Hardness and Knoop Hardness for Metallic Materials (here: Vickers Hardness) Period of validity: to Translation - 2/5

3 ASTM A Standard Test Methods for Determining Hardenability of Steel 1.3 Notch impact testing DIN EN ISO DIN ASTM E23b SEP Metallic materials - Charpy pendulum impact test - Part 1: Test method Charpy impact test on metallic materials; part 1: test method Standard Test Methods for Notched Bar Impact Testing of Metallic Materials Determination of brittle-ductile transition temperature FATT and other characteristic properties 1.4 technological sheet testing DIN EN ISO DIN EN ISO Metallic materials - bend test Metallic materials - Sheet and strip - Erichsen cupping test 1.5 Fracture toughness testing ASTM E Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials 1.6 Fatigue testing DIN Load controlled fatigue testing - Execution and evaluation of cyclic tests at constant load amplitudes on metallic specimens and components Period of validity: to Translation - 3/5

4 2 Metallographic examinations and miscellaneous tests 2.1 Metallographic examinations ISO ISO DIN EN ISO DIN EN ISO DIN EN DIN ASTM E ASTM E ASTM E 381 ASTM A ASTM E SEP SEP Steel - Determination of content of non-metallic inclusions - Micrographic method using standard diagrams Tool steels and bearing steels - Micrographic method for assessing the distribution of carbides using reference photomicrographs Steel - Micrographic determination of the apparent grain size Steels - Determination of depth of decarburization Micrographic examination of the non-metallic inclusion content of steels using standard pictures Metallographic examination; microscopic examination of special steels using standard diagrams to assess the content of nonmetallic inclusions Standard Test Methods for Determining the Inclusion Content of Steel Standard Test Methods for Determining Average Grain Size Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens Microscopic examination of carbide structure in steels by means of diagram series Evaluation of inclusions in special steels based on their surface areas Period of validity: to Translation - 4/5

5 SEP SEP SEP SEP Microscopic test of free cutting steels for solid nonmetallic inclusions in metal by means of strip mosaics Blue brittleness test for the testing of steels for macroscopic nonmetallic inclusions Microscopic inspection of hot-work tool steels Microscopic and macroscopic testing of high-speed steels for their carbide distribution by means of strip mosaics 2.2 Miscellaneous testing DIN EN ASTM A 341/A 341M ASTM A 773/A 773M 2014 Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials Standard Test Method for Direct Current Magnetic Properties of Soft Magnetic Materials Using D-C Permeameters and the Point by Point (Ballistic) Test Methods Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs Abbreviations used: ASTM DIN EN ISO SEP American Society for Testing and Materials German Institute for Standard European Standard International Organization for Standardization Steel and iron test sheet of the Association of German Steel Institute Period of validity: to Translation - 5/5