Scratch Polishing Compound OSHA PEL, ACGIH TLV Mixture Scratch Polishing Compound Scratch Removal from glass. David Pettersson Miljökonsulterna MHS AB

Transcription

1 1. NAME OF PRODUCT AND COMPANY Scratch Polishing Compound Page 1 of 5 TRADE NAME CHEMICAL NAME ART. No. APPLICATION Scratch Polishing Compound OSHA PEL, ACGIH TLV Mixture Scratch Polishing Compound Scratch Removal from glass COMPANY Glas-Weld System AB ADDRESS Fjärrviksvägen 13 POSTAL ADDRESS KARLSTAD TELEPHONE +46-(0) esbjorn@glasweld.se WEBSITE OWNERS ISSUER David Pettersson Miljökonsulterna MHS AB 2. HAZARD IDENTIFICATION 2.1 Classification according to CLP (Regulation (EC) no 1272/2008) and KIFS 2010: 5 The product is harmful to health, concentration and composition of the constituent chemicals resulting in labelling requirement under existing regulations. This product may cause damage by improper use. Deemed not human health hazards under normal use. Follow the instructions for use. High concentration may cause irritation of the eyes, respiratory system and skin. Classification of the mixture under CLP: Not assessed as dangerous for the environment 2.2 Marking of the mixture according to the CLP regulation R-PHRASES Dust in high concentration may cause irritation of the eyes, respiratory system and skin S-PHRASES S2 Keep out of the reach of children; S3/7 Keep container tightly closed in a cool place; S20/21 When using do not eat, drink or smoke; S24/25 Avoid contact with skin and eyes; S28 After contact with eyes flush thoroughly with plenty of water. In case of irritation consult a doctor; S36/37/39 Wear suitable protective clothing, protective gloves and safety glasses/goggles or face protection 2.3. other hazards Use the product only for its intended purpose. Skin contact may cause slight transient irritation and rapid and/or increased sensitivity. DANGER SYMBOL: No hazard symbol

2 Scratch Polishing Compound Page 2 of 5 3. COMPOSITION/INFORMATION ON THE COMPONENTS 1. Name of product and company CAS No. Name: Conc. WT% Classification Rare Earth Oxide >60 Includes OSHA PEL and ACGIH TLV See point 11 exposure limits Neodymimum Oxide <40 R 36/37/38; 48/20/21/22; Aluminum Silicate <40 S 22/24/25 4. FIRST AID MEASURES GENERELLT This information sheet should be kept and displayed for ev. hired doctor. Contact your doctor at the lingering irritation. INHALATION Fresh air and relax. SKIN CONTACT Wash skin thoroughly with SOAP and water. Rinse off with plenty of water. EYE CONTACT Flush eyes immediately with water for minutes. Use tepid water of low pressure. Keep an eye during the spraying. Contact your doctor if irritation persists. 5. FIRE FIGHTING MEASURES GENERAL MEASURES IN THE EVENT OF A FIRE OR THREAT OF FIRE Alerting the emergency services Tel Save the first persons in danger. EXTINGUISHING MEDIA Use carbon dioxide or powder for small fires, water-based foam or water for large fires. FIRE AND EXPLOSION HAZARDS - OTHER INSTRUCTIONS - 6. SPILL/ACCIDENTAL RELEASE MEASURES Avoid discharge into sewers. Collect waste in well sealed approved packaging for disposal/destruction in accordance with local regulations. 7. HANDLING AND STORAGE MANAGEMENT Keep container well closed. MANAGEMENT REGULATIONS Non-smoking or swallowed in conjunction with management. Ensure that the existing occupational safety rules are followed STORAGE Keep out of the reach of children. Keep in a dry place and in tight container

3 Scratch Polishing Compound Page 3 of 5 8. EXPOSURE CONTROLS/PERSONAL PROTECTION MEASURES PREVENTIVE MEASURES Use only in well-ventilated areas. Observe normal precautions when handling chemicals. EYE PROTECTION Protective Goggles HAND PROTECTION Protective gloves made of neoprene recommended RESPIRATORY PROTECTION Use respiratory protective equipment when much dust is formed. OTHER PROTECTIVE CLOTHING Regular protective clothing at normal handling of this product. Follow the directions for use. 9. PHYSICAL AND CHEMICAL PROPERTIES Product shape Color Odour Solubility Specific weight Cream Pale blue Slight odor Soluble in water 6,0 kg/m3 Flash Point STABILITY AND REACTIVITY.Stability Polymerisation Hazardous decomposition products Stable under recommended storage and handling conditions No polymerisation No specific hazardous decomposition products 11. TOXICOLOGICAL INFORMATION EXPOSURE LIMIT VALUES Namne CAS No OSHA PEL ACGIH - TLV Iritable dust total - 15 mg / m 3 10 mg / m 3 Iritable dust inhalerbart - 5 mg / m 3 5 mg / m 3 Acute toxicity Health hazards, General Eye Contact No acute toxicity at normal handling Deemed not health hazardous under normal conditions of use and the use of the prescribed protective equipment Flush eyes immediately with water for minutes. Use tepid water of low pressure. Keep an eye during the spraying. Contact your doctor if irritation persists.

4 Scratch Polishing Compound Page 4 of TOXICOLOGICAL INFORMATION Dermal No specific information is available. Contain substances that may be toxic to easily. 12. ECOTOXICOLOGICAL INFORMATION ECOTOXICOLOGICAL DATA Dissemination in the environment are not assessed as dangerous for the environment Other information Under the guidelines for preparation and compound products the product was classified using the calculation method Environmental Protection Measures No effect Concentration NOEC, > 100 mg/l/96 hr. fish 13. DISPOSAL CONSIDERATIONS DISPOSAL CONSIDERATIONS Spills, residues and contaminated absorption material collected in containers that are declared with the content and are disposed of in accordance with local regulations Disposed of according to local regulations 14. TRANSPORT INFORMATION The product is not classified as dangerous goods according to international rules in the ADR, The product is not classed as hazardous goods under international regulations in ADR,IMDG and ICAO-IT, IATA-DGR 15. APPLICABLE REGULATIONS NATIONAL REGULATIONS: Chemical Inspectorate's regulations: Regulation (KIFS 2005: 7 consolidated even KIFS 2010: 5) the classification of chemical products Working Environment Authority's statute book (AFS 2011: 18) the exposure limit values and measures against air contaminants Working Environment Authority's statute book (AFS 2011: 19) Waste Chemical risks related to occupational safety and Health Ordinance (SFS 2011: 927) ADR-regulations on the transport of dangerous goods by road and in terrain (MSBFS 2011: 1)

5 Scratch Polishing Compound Page 5 of OTHER INFORMATION INFORMATION SOURCES: The supplier's declaration on material composition/consumption and classification This product may cause damage by improper use. Not responsible for damage resulting from use other than that for which the product is intended. CONTACT PERSON: David Pettersson Miljökonsulterna MHS AB Tel: +46 (0)