provides remarkable cutting performance, durability and cost reduction.

Transcription

1 provides remarkable cutting performance, durability and cost reduction. 1 2 Thanks to superior, wear resistant, anti-welding TiN coating, this tool is suitable for cutting in stainless steels and hard materials. Features We have strengthened the stock of blank materials based on cutting machine function. 3 Base materials are selected based on machine functions, such as manual and automatic, in order to prevent chipping and cracking. Tools for automatic machines are heat treated, which allows for long-term continuous and un-manned operations. TOOL COMMUNICTION

2 Stock List of TiN Coated Products for Manual Machines (Molybdenum HSS) HCS Surface Treatment Tool Material Type of Cutting Half-finished Stockwithout teeth , , , , HY-PRO CIRCULR SW TiN TiN Coating Molybdenum HSS Continuous Cutting by Manual Machines For Stainless and Hardened Steels Manual Machine KCMCU IBP NTC IBP CU KCM KCMCUNTC KCM of Stock Stockwith teeth Pitch P4 P4 Manual Machine KCMCUNTC of Stock

3 Stock List of TiN Coated Products for utomatic Machines (Cobalt HSS) Half-finished Stockwithout teeth HCS Surface Treatment Tool Material Type of Cutting , , , , HY-PRO CIRCULR SW TiN TiN Coating Cobalt HSS Continuous Cutting by utomatic Machines For Stainless and Hardened Steels utomatic Machine CM CM CM of Stock

4 Stock List of Steam Oxided Prodects for General Use Cutting (Molybdenum HSS) HCS Surface Treatment Tool Material Type of Cutting HY-PRO CIRCULR SW Steam Oxided Molybdenum HSS General Use Cutting Half-finished Stockwithout teeth Stockwith teeth utomatic Machine Manual Machine CM CM CM KCMCU IBP NTC IBP CU KCM KCMCUNTC KCM Pitch utomatic Machine Manual Machine P P4 KCMCUNTC of Stock of Stock

5 d2 D 2mm 0 S 0.05mm 0 d1 ISO H mm 0 d2 d3 s D d1 d3 Tolerance of size :D 2mm 0 :S 0.05mm 0 :d1 ISO H7 Tolerance mm Pitch Circle DiameterPCD Pin Shape of Cutting Edge Shape of Cutting Edge BW pplication 5mm Type BW (Mutual Helical Bevel Blade) For General Steels For Precise Cutting(extra fine pitch) less than 5mm C 6mm Type C For Difficult to Machine Materials (Double-Sided Mutual (course pitch, rough pitch) Helix Bevel Blade) over 6mm P R R Shape Rake ngle Rake ngle Characteristics 3/5 This tool is for general materials and used for cutting in sheet metals, thin-walled pipes and steels with small diameter. In order to reduce load on the cutting edge, each edge cuts 3/5 depth sequentially. 1/3 The High and Low edges are sequentially placed on the course and rough pitch type circular saw. The corner of the high edges are removed up to 30. Selecting pitch based on work material <Selecting pitch> Selecting work material Selecting the shape of work piece Deciding the pitch Work Material luminum lloy Copper Steel for Structural Use Cast Steels Brass Bronze Cast Iron Stainless Steels Tool Steels High Speed Steels Thick-walled Pipe Medium-walled Pipe Thin-walled Pipe Shape of Work Piece (section) Graph B C D E Relationship Between Work Material and Pitch E 7 6 Pitch of 5 Cutting Edge Pmm 4 Hard Material 3 Mild Material of Work MaterialDmm B C D

6 Rake ngle based on Work Material(for general) Work Material Rake ngle Work Material Rake ngle Mild Steels 20 Cast Iron 10 General Steels 18 Brass 15 Hardened Steels 1015 Copper High-hardened Steels 58 luminum Recommended Cutting Conditions based on Work Materials Type of Work Material Carbon Steels Steel for Structural Use lloy Steels Chrome Steels High Tension Steels Special Steels High Speed Steels Stainless Steels Shape Steels Steel Pipe Cast Steels Cast Iron luminum lloy Magnesium lloy Copper Non-ferrous Metals Bronze Brass Zinc lloy Nickel Silver kg/mm 2 Tensile Strength Rake ngle Without OX Treatment Without OX Treatment m/min Cutting Speed , mm/ Feed per Teethmm/Teeth Safe use of cutting tools Use a safety cover, safety glasses and safety shoes during operation. Do not touch cutting edges with bare hands. Do not touch cutting chips with bare hands. Chips will be hot after cutting. Stop cutting when the tool becomes dull. Stop cutting operation immediately if you hear any strange cutting sounds. Do not modify tools. Please use the correct tools for this operation. Check dimensions to ensure proper selection Honnogahara, Toyokawa-city, ichi-pref., Japan Phone : (0533) /1119 Facsimile : (0533) tcp-ip.or.jp H-13,914,I,IW