Micro Center Jackscrew

Transcription

1 The jackscrew series provides a reliable interconnect for boardtoboard, boardtocable and inline cabletocable applications. Layouts accommodating up to 76 MIROPIN/MIROSOKET TM contacts are available, with the same wide range of options as are offered with the other MIRO Line products offered in this catalog. How to Order RoHS OMPLINE SERIES INSULTOR MTERIL ONTT RRNGEMENT ONTT TYPE TERMINTION TYPE TERMINTION OES R * 26 P H 00 SERIES ONTT TYPE TERMINTION OE* INSULTOR MTERIL iallyl phthalate V Polyester U Polyetherimide R Polyphenylene sulfide ONTT RRNGEMENTS Unshrounded Receptacle: 0, 26, 5, 66 Shrouded Receptacle; 0, 26, 34, 38, 42, 76 Low Profile Plug and Receptacle (shrouded): 28 Standard Wire Termination odes P Pin S Socket TERMINTION TYPE H Insulated wire harness. I Integral tail (V28S only). L Solid uninsulated wire. S Solder pot to accept #26 WG harness wire. T Thru bundle pigtail (V28P only). (H) 00 (H) 003 (L) (L) 2 8", 7/34 strand, #26 WG, MILW6878/4, Type E Teflon, yellow. 8", 7/34 strand, #26 WG, MILW6878/4, Type E Teflon, color coded to MILST68 System I. /2" uninsulated solid #25 WG gold plated copper. " uninsulated solid #25 WG gold plated copper. * See Termination odes shown below. The following termination codes are listed for your information. For additional codes please refer to ppendix on page 79 and 8. ll wire lengths are minimum. Harness Type (H) #26 WG per MILW6878/4 Type E Teflon, 7/34 stranded. 3 (76.2) H 020 H (52.4) H 09 H 06 8 (203.2) H 026 H (254.0) H 029 H (304.8) H 028 H (457.2) H 00 H (508.0) H 038 H 023 Solid Uninsulated Type (L) #25 WG gold plated solid copper. ll Yellow olor oded ll Yellow olor oded Termination 24 (609.6) 30 (762.0) 36 (94.4) 48 (29.2) 72 (828.8) 20 (3048.0) H 009 H 00 H 0 H 03 H 07 H 042 H 004 H 005 H 006 H 048 H 046 H 04 ode L6 L56 L57 L39 L58 L.25 (3.8).50 (3.8).250 (6.35).375 (9.53).500 (2.70) Termination ode L4 L2 L7 L6 L6 L0.750 (9.05).000 (25.40).500 (38.0) (50.80) (63.50) (76.20) ontact rrangements Face view of pinuse reverse order for socket ontacts ontacts 6 ontacts** 28 ontacts** ontacts ontacts /U (unshrouded) Identification numbers are for reference only and do not appear on connectors *Low profile configuration **V & R 34 ontacts V (shrouded)

2 Unshrouded Receptacle (026566) /U.26 ±.005 (3.20 ± 0.3).70 ±.00 (4.32 ± 0.25) POLRIZING PIN (OPTIONL WITH LOSS OF ONTT).050 (.27) 64 UN2 THRE 64 UN2 THRE.45 (3.68) I. MX. Rear View.055 (.40).70 (4.32) MX..0 MX. (2.79) Receptacle.332 (8.43) MX. Plug UNSHROUE STNR MTERILS N FINISHES opper alloy, 50 miroinch gold Microsocket opper alloy, 50 microinch gold Retainer, Insert, Threaded Post, Polarizing iallyl phthalate, green color or polyetherimide, natural color & lubricated or U0P or U0S or U26P or U26S or U5P or U5S or U66P or U66S.378 (9.60).378 (9.60).778 (9.76).778 (9.76).028 (26.).028 (26.).280 (32.5).280 (32.5) sc..290 (7.37).290 (7.37).690 (7.53).690 (7.53).940 (23.88).940 (23.88).90 (30.23).90 (30.23) Shrouded Receptacle (628*34) V/R 64 UN2 THRE.205 (5.2) MX..080 (2.03).065 (.65).285 (7.24) MX. Face View Plug 64 UN2 THRE.090 ±.00 (2.29 ± 0.25).285 (7.24) MX..0 (2.79) MX. Face View Receptacle.45 (3.68) I. MX. SHROUE STNR MTERILS N FINISHES opper alloy, 50 miroinch gold Microsocket opper alloy, 50 microinch gold Polyester, black color Retainer, Insert, Threaded Post, Polarizing V or R6P V or R6S.700 (7.78).700 (7.78).320 (8.3).545 (3.84).545 (3.84) ±.006 (0.5).75 (4.45) V28P* or R28P*.020 (25.9) V28S* or R28S*.020 (25.9).232 (5.89).246 (6.25).865 (2.97).865 (2.97).062 (.57) V34P or R34P V34S or R34S.80 (29.97).80 (29.97).330 (8.38).305 (7.75).025 (26.04).025 (26.04).60 (4.06) *Low profile configuration, for "L" (uninsulated solid wire) termination add.090 (2.29) to the "" dimension. For "H" (insulated wire) termination add.200 (5.08) to the "" dimension. For special configurations with backpotted standoffs consult factory. 40

3 Shrouded Receptacle (42) R42P V. #.25 (3.8).322 (33.58).00 (2.54) (.9) V. #3.297 (7.54).420 (0.67) MX. V #42 # (.073) 64 UN2 THREE INSERT.035 (0.89).05 (0.38) R42S.25 (3.8).00 (2.54).328 (33.73) V # (.9).303 (7.70).420 (0.67) MX. V. 42 /6 SOKET HE JKSREW # ( UN 2 THRE.3 (3.33).2 (3.07) TYP.45 (3.68) I. MX..08 MX. (2.74) R42P R42S.445 (36.70).445 (36.70).357 (9.07).250 (3.75).250 (3.75) ±.006 (0.5).42 (3.6) STNR MTERILS N FINISHES opper alloy, 50 miroinch gold Microsocket opper alloy, 50 microinch gold Retainer, Insert, Threaded 4

4 Shrouded Receptacle (76) R76P V. #3.00 (2.54).472 (37.39) V. # (.9) #2 (0.86) 64 UN2 THREE INSERT V. #76 V. # (.35).570 (4.48) MX..035 (0.89).05 (0.38) R76S V. #.478 (37.54).00 (2.54) V. #3 (.9).453 (.5).570 (4.48) MX. V. #62 V. #76 /6 SOKET HE JKSREW #2 ( UN 2 THRE.3 (3.33).2 (3.07) TYP.60 (4.06) MX..50 (3.8) MX. R76P R76S.595 (40.5).595 (40.5).357 (9.07).400 (35.56).400 (35.56) ±.006 (0.5).42 (3.6) STNR MTERILS N FINISHES opper alloy, 50 miroinch gold Microsocket opper alloy, 50 microinch gold Retainer, Insert, Threaded 42

5 Plug (MoldedIn Insert Special) V**P VITY #.00 (2.54) INSERT #64 UN2 INSULTOR MX. ENGGING FE MIROPIN ONTT.62 (4.).300 (7.62) MX..06 (.55) MX. LE LENGTH.09 (2.77) MX. I. V26P** (Shown) V26P** V38P**.868 (22.05).68 (29.67) Receptacle (Special) V**S* MX. MIROSOKET.00 (2.54) #64 UN2 VITY #.67 (4.24).253 (6.43) MX..320 (8.3) MX..55 (3.94) MX. LE LENGTH JKSREW V26S** (Shown) V26S** V38S**.943 (23.95).243 (3.57).874 (22.20).74 (29.82) ontact rrangements Face view of pin use reverse order for socket (.9).050 (.27).00 (2.54) (.9).00 (2.54) (.27) 26 ontacts.050 (.27) 38 ontacts Identification numbers are for reference and do not appear on connectors. 43