Publications : : 2012

Transcription

1 Publications : : S.C. Heck, F.A.P. Fernandes, G.E. A. Lombardi Neto, L.C. Casteletti, Boronizing Maraging Steel (C-250 Grade): Evaluation Wear Behavior, Rechuli (Heat Treatment), 2012, Vol. 27, No. 1, p G.E. Totten and L.L.M. Albano, IFHTSE Global 21: Heat treatment and surface engineering in the 21 st century Part 18: Quenching: current status and future developments, International Heat Treatment and Surface Engineering, 2012, Vol.6, No.1, p F.A.P. Fernandes, G.E. J. Gallego, L.C. Casteletti, Plasma Nitriding and Nitrocarburising a Supermartensitic Stainless Steel, International Heat Treatment and Surface Engineering, 2012, Vol.6, No.1, p F.A.P. Fernandes, S.C. Heck, G.E. C.A. Picon, L.C. Casteletti, Effect Strain hardening on the wear and corrosion behavior a Fe-Mn-Al-C alloy, Int. J. Microstructure and Properties, 2012, Vol. 7, Nos. 2/3, p Ester C. Sousa, Diego S. Schicchi, Analia Gaston, Gustavo S. Sarmiento, George E. Lauralice C.F. Canale, Residual Stresses and Heat Transfer Properties a Series Oxidized and Unoxidized Vegetable Oils in Comparison with Petroleum Oil-Based Quenchants, 15 th International Conference on Experimental Mechanics (ICEM-15), Faculty Engineering, University Porto, Porto, Portugal, July 22-27, 2012, Paper No F.A.P. Fernandes, S.C. Heck, C.A. Picon, G.E. Totten and L.C. Casteletti, Wear and Corrosion Resistance Pack Chromised Carbon Steel, Surface Engineering, 2012, Vol. 28, No. 5, p Patricia Mariane Kavalco, Rosa L. Simencio Otero, Lauralice C.F. Canale, George E. Redução da Distorcão de Ligas de Aluminio por Meio de Tempera em Solução Aquosa de Polimero, Industrial Heating (Brazil), 2012, June, p

2 607. F.A.P. Fernandes, L.C. Casteletti, G.E. Totten and J. Gallego, Decomposition Expanded Austenite in AISI 316L Stainless Steel Nitrided at 723K, International Heat Treatment and Surface Engineering, 2012, Vol.6, No.3, p I. Felde, G.E. Estimation Heat Transfer Coefficient Obtained During Immersion Quenching, in Conf. Proceed. 6 th International Conference on Quenching and Control OH, 2012, p ISBN: D.S. Schicchi, G. Belinato, G.S. Sarmiento, A. Gastón, G.E. L.C.F. Canale, Effect Soybean Oil and Palm Oil Oxidation Stability on the Variation Heat Transfer Coefficients and Residual Stress, in Conf. Proceed. 6 th International Conference on Quenching and Control OH, 2012, p ISBN: D.S. Schicchi, E.C. de Souza, A. Gastón, G.S. Sarmiento, G.E. L.C.F. Canale, Effect Vegetable Oil Oxidation on Heat Transfer and Residual Stress during Quenching, in Conf. Proceed. 6 th International Conference on Quenching and Control Distortion, Ed. D.S. MacKenzie, September 9-13, 2012, Chicago, IL, ASM International,, OH, 2012, p ISBN: D.E. Lozano, R.D. Mercado-Solís, R.Colás, L.F. Canale, G.E. Surface Temperature and Heat Transfer Coefficient Determination during Quenching for Martensite Fraction Prediction Using a Parabolic Heat Transfer Model, in Conf. Proceed. 6 th International Conference on Quenching and Control Distortion, Ed. D.S. MacKenzie, September 9-13, 2012, Chicago, IL, ASM International,, OH, 2012, p ISBN: T. Giordani, T.R. Clarke, C.E.F. Kwietniewski, M.A. Aronov, N.I. Kobasko, G.E. Preliminary Evaluation Fatigue in Carburized, Conventionally and Intensively Quenched Steels, in Conf. Proceed. 6 th International Conference on Quenching and Control Distortion, Ed. D.S.

3 MacKenzie, September 9-13, 2012, Chicago, IL, ASM International,, OH, 2012, p ISBN: G.M. Martinez-Cázares, D.E. Lozano, M.P. Guerrero-Mata, R. Colás, L.C. Canale, G.E. Modelling Temperature Distribution a Square Bar During Spray Quenching and Square Edge Cooling Effect, in Conf. Proceed. 6 th International Conference on Quenching and Control, OH, 2012, p ISBN: D.E. Lozano, R.D. Mercado-Solís, R.Colás, L.F. Canale, G.E. Heat Transfer Coefficients During Quenching Inconel and AISO 304 Stainless Steel Cylinders in NaNO2 Aqueous Solutions, in Conf. Proceed. 6 th International Conference on Quenching and Control Distortion, Ed. D.S. MacKenzie, September 9-13, 2012, Chicago, IL, ASM International,, OH, 2012, p ISBN: X. Luo, K. Chen, G.E. Fast Primary Cooling: Alternative to Lead Baths for High- Carbon Steel Wire Patenting, Performance and Characterization, 2012, Vol. 1, No.1, Paper ID MPC L.L.M. Albano, P.M. Kavalco, G.E. L.C.M. Canale, IFHTSE Global 21: Heat Treatment and Surface Engineering in the 21 st Century Part 19: Type I Quenchants for Quenching Aluminum: A Review, International Heat Treatment and Surface Engineering, 2012, Vol.6, No.4, p Diego S. Schicchi, Rosa L. Simencio Otero, Gustavo Sánchez Sarmiento, George E. Lauralice C.F. Canale, Epoxidized Soybean Oil/FAME Blends as Metal Quenchants: Part II Quenching and Residual Stress Performance, 20 th Congress for Heat Treatment and Surface Engineering, Eds. Gao Beijing, China, p

4 618. R.S. Otero, A.F. Farah, O.R. Crnkovic, G.E. L.C.F. Canale, Castor Oil: Studies for Heat Treatment Applications, 20 th Congress for Heat Treatment and Surface Engineering, Eds. Gao Beijing, China, p Antônio C. Canale, Luigi L.M. Albano, George E. Lauralice C.F. Canale, Quench Factor Characterization Quenchants, 20 th Congress for Heat Treatment and Surface Engineering, Eds. Gao Beijing, China, p Ayrton Antonio Batista Junior, Adriana Marques, George E. Lauralice C. Franceschini Canale, Cooling Curve and Rewetting Properties Vegetable Oil Based Quenchants: Comparison a Series Vegetable Oils, 20 th Congress for Heat Treatment and Surface Engineering, Eds. Gao Beijing, China, p Ester Carvalho de Souza, George E. Lauralice de Campos Franceschini Canale, Effect Bath Temperature on the Quenching Performance Vegetable Oils, 20 th Congress for Heat Treatment and Surface Engineering, Eds. Gao Zhi and Han Chong, Chinese Heat Treatment Society (CHTS), October 2012, Beijing, China, p R.L. Simencio Otero, D.S. Schicchi, R.N. Penha, G.S. Sarmiento, L.C.F. Canale, G.E. Utilizaćão do Óleo de Soja Epoxidado e Blendas Com Éster Metilíco de Óleo de Soja Como de Fluidos de Têmpera: Parte II Têmpera e Tensões Residuais, Proceedings 20 0 CBECIMAT Brasileiro de Engenharia e Ciência dos Materiais, 04 a 08 de Novembro de 2012, Joinville, SC, Brasil, p

5 623. E.C. de Souza, S.C.M. Augustinho, G.E. L.C.F. Canale, Caracterização das Físico- Químicas dos Óleos Vegetais Utilizando RMN de H 1, Proceedings 20 0 CBECIMAT Brasileiro de Engenharia e Ciência dos Materiais, 04 a 08 de Novembro de 2012, Joinville, SC, Brasil, p S. Tung and G.E. Handbook Automotive Lubrication and Testing, 2012, ASTM International, West Conshohocken, PA. 495 pp., ISBN: Ester Carvalho de Souza, Rosa L. Simencio Otero, Lauralice C.F. Canale, George E. Fluidos de Tȇmpera Derivados de Óleos Vegetais como Alternativa aos Óleos Minerais, Industrial Heating (Brazil), 2012, December, p Ester Carvalho de Souza, Luiz Fernando de Oliveira Friedel, George E. Lauralice de Campos Franceschini Canale, Quenching and Heat Transfer Properties Aged and Unaged Vegetable Oils, Journal Petroleum Science Research (JPSR), 2012, Vol. 2, No.1, p