Grade Compositions (ASTM)

Transcription

1 WEDX-00A Grade Serie (Polybutylene terephthalate) Grade Compoition (ASTM)

2 A Rein with Outtanding Heat Reitance and Electrical Property (Polybutylene terephthalate) NOTES TO USERS All property value hown in thi brochure are the typical value obtained under varying condition precribed by applicable tandard and tet method. Thi brochure ha been prepared baed on our own experience and laboratry tet data, and therefore all data hown here are not alway applicable to part ued under different condition. We do not guarantee that thee data are directly applicable to the application condition of uer and we ak each uer to make hi own deciion on the application. It i the uer' reponibility to invetigate patent right, ervice life and potentiality of application introduced in thi brochure. Material we upply are not intended for the implant application in the medical and dental field, and therefore are not recommended for uch ue. For all work done properly, it i advied to refer to the appropriate Technical Catalog for pecific material proceing. For afe handling of material we upply, it i advied to refer to the Material Safety Data Sheet MSDS of the proper material. Thi brochure i edited baed on reference literature, information and data currently available to u. So the content of thi brochure are ubject to change without notice due to new data. Pleae contact our office for any quetion about product we upply, decriptive literature or any decription in thi brochure. * DURANEX i a regitered trademark of Polyplatic Co., Ltd in Japan and other countrie, under licene to WinTech Polymer Ltd. * WinTech Polymer Ltd. i a member of the Polyplatic Group, while the DURANEX rein manufactured and old by that firm i marketed by Polyplatic affiliated companie. 1

3 DURANEX i upplied in a variety of grade, for example, a reinforced grade which i reinforced by gla fiber to exhibit excellent characteritic, a elf-extinguihing grade which i with a flame retardant and the one that ha combined all thee excellent characteritic. DURANEX not only ha uch excellent characteritic a low moiture aborption, high hert Property,, FR, 50 regrind Low warpage Hydrolyi reitant, heat hock reitant Rein adheion improved for multiple injection molding Epoxy Adheion Improved Higher glo, Better urface appearance Low friction, Weather reitant Electric conductive Un for film, extruion 94 Segment Unreinforced, High Flow Toughne Aniotropy improvement Low denity, Aniotropy improvement Low denity, HR HR, HSR /HR High tiff, Low warp, Low ink Unreinforced Lower melting point ditortion temperature, chemical reitance, electrical propertie and dimenional tability, but alo ha excellent proceability which i an inherent characteritic of all thermoplatic polymer. Taking advantage of thee excellent characteritic, DURANEX i finding increaing application in electric and electronic appliance, automotive part and many other indutrial part. DURANEX H 3105H 3300H LD 7307B K 7400W 6300B 601SA 304SA 701SA 711SA 750LD 7195W 7390W 6370B 361SA 652SA 751SA 330HR 531HS 313RA 303RA 353RA 3105A MS 407EP 02K 6302T 6300T 7400F 9AW 02U 7300E 0FP 300FP 500FP 700FP 800FP 600JP Characteritic -GF15 -GF -GF30 -GF40 -GF45 -GF10 -GF15 -GF30 FR(17) -GF10 FR(17) -GF15 FR(17) -GF FR(17) -GF30 FR(17) +ABS-GF30 -GB30 +PC-(GF+GS)30 +PC-(GF+GS)40 +PC-GF50 -(GF+GS)40 -GB30 +ABS-TD +ABS-GF15 +ABS-(GF+GS)30 +ABS-(GF+PS) +ABS-GF30 FR(17) -(GF+GS)15 FR(17) -(GF+GS)30 FR(17) -GB30 FR(17) +ABS-GF15 FR(17) +ABS-(PS+TD) FR(17) +ABS-(GF+GS)30 FR(17) -GF30 +A/MMA-GF30 SP-GF15 SP-GF30 SP-GF30 FR(17) +E/EA-GF15 +PET-GF30 SP-(GF+PS)55 FR(17) -TD5 +MH30 +MH30 +PTFE-GF30 +PE FR(17) -(GF+CD)35 SP 2

4 Un High flow Un G F 15 G F G F 40 High rigidity G F 45 High rigidity > ,540 5,390 6,570 9,1 12,060 14, , under load (1.82) C / C ~ 8 3 ~ 8 breakdown (125) (125) Tracking reitance (550) (500) All figure in the table are the typical value of the material and not the minimum value of the material pecification. For qualified value of (Underwriter Laboratorie Inc.) refer to the yellow card (File No.E213445) iued by 3

5 , FR, 50 Regrind 3100H 3105H 3300H G F 7.5 Toughne G F 15 Toughne Toughne Un G F 7.5 G F ,430 5,090 8,8 2,840 4,410 6, under load (1.82) C / C 3 ~ 8 9 breakdown (62) (65) (70) Tracking reitance (250) (250) (250) All figure in the table are the typical value of the material and not the minimum value of the material pecification. For qualified value of (Underwriter Laboratorie Inc.) refer to the yellow card (File No.E213445) iued by 4

6 , FR, 50 Regrind Low warp LD 7307B W G F G F30 G B G F G F G F ,250 9,610 9,000 5,190 5,880 9,1 9, under load (1.82) C / C 3 ~ 6 3 ~ 6 breakdown (77) (110) Tracking reitance (265) (325) All figure in the table are the typical value of the material and not the minimum value of the material pecification. For qualified value of (Underwriter Laboratorie Inc.) refer to the yellow card (File No.E213445) iued by 5

7 7507K 6300B 601SA 304SA 701SA 711SA 750LD G F High rigidity 1.69 Aniotropy improvement G B 30 Le inking 1.53 Low denity, Mineral 1.34 Low warp Low denity, G F Low pecific gravity High flow 1.28 Low denity, Low pecific gravity 1.43 Low denity, Low pecific gravity , 4,0 4,400 5,0 7,400 8,000 9, under load (1.82) C / C 8 breakdown (125) Tracking reitance (300) All figure in the table are the typical value of the material and not the minimum value of the material pecification. For qualified value of (Underwriter Laboratorie Inc.) refer to the yellow card (File No.E213445) iued by 6

8 Low Warpage Hydrolyi reitant, Heat hock reitant 7195W 7390W 6370B 361SA 652SA 751SA G F G F Aniotropy improvement Le inking Low denity, G F 15 High flow Low denity, Mineral Low denity, Low pecific gravity 330HR Hydrolyi reitant ,880 8,9 5,780 5,800 5,500 8,300 9, under load (1.82) C / C breakdown (69) Tracking reitance (275) All figure in the table are the typical value of the material and not the minimum value of the material pecification. For qualified value of (Underwriter Laboratorie Inc.) refer to the yellow card (File No.E213445) iued by 7

9 Hydrolyi reitant, Heat hock reitant Rein adheionimproved for multiple injection molding Epoxy adheion improved Higher glo, Better urface appearance 531HS Hydrolyi reitant Heat hock reitant 313RA 303RA 353RA 3105A MS G F 15 Hydrolyi reitant G F 15 High tiff Low warp Low Sinking ,550 5,300 8,600 9,300 5,390 9,1 16, under load (1.82) C / C breakdown (1) (125) Tracking reitance (425) (570) All figure in the table are the typical value of the material and not the minimum value of the material pecification. For qualified value of (Underwriter Laboratorie Inc.) refer to the yellow card (File No.E213445) iued by 8

10 Higher glo, Better urface appearance Low friction, Weather Reitant 407EP Un Toughne 02K 6302T 6300T 7400F 9AW 02U Unreinforced Rigidity up Mineral Mineral PTFE Un Sliding Un > ,646 3,234 9,310 9,610 8,8 2,842 2, ,760 under load (1.82) C / C breakdown (103) (103) (173) Tracking reitance (280) (280) (425) (600+) All figure in the table are the typical value of the material and not the minimum value of the material pecification. For qualified value of (Underwriter Laboratorie Inc.) refer to the yellow card (File No.E213445) iued by 9

11 Electric conductive Un for film, Extruion 7300E G F 0FP 300FP 500FP 700FP 800FP 600JP high flow High flow Cat heet Extruion iamination Duplicate extruion Extruion Extruion iamination Inflation Lower melting point >0 >0 > ,660 2,550 2,550 2,550 2,550 2, , Not detroied 49 Not detroied 29 1,176 under load (1.82) C / C breakdown Tracking reitance All figure in the table are the typical value of the material and not the minimum value of the material pecification. For qualified value of (Underwriter Laboratorie Inc.) refer to the yellow card (File No.E213445) iued by 10

12 ISO 9001:00 Certified JQA-1283 ISO14001 Certified JQA-EM0337 Reearch & Development Div. JQA-EM0414 Fuji Plant Thi regitered mark doe not guarantee quality of our product or ervice. WinTech Polymer Ltd. i a member of the Polyplatic Group, while the DURANEX rein manufactured and old by that firm i marketed by Polyplatic affiliated companie in the region lited below. DURANEX i a regitered trademark of Polyplatic Co., Ltd. Kaumigaeki Bldg. (Flr. 6th) 2-5, Kaumigaeki 3-chome, Chiyoda-ku, Tokyo, Japan Phone: Fax: Kaumigaeki Bldg. (Flr. 6th) 2-5, Kaumigaeki 3-chome, Chiyoda-ku, Tokyo, Japan Phone: Fax: Affiliate Polyplatic Aia Pacific Sdn. Bhd. (Kuala Lumpur) Polyplatic Aia Pacific Singapore Pte. Ltd. (Singapore) Polyplatic China Limited (Hong Kong) Polyplatic Marketing (T) Ltd. (Bangkok) Polyplatic (Shanghai) Ltd. (Shanghai) Polyplatic Trading (Shanghai) Ltd. (Shanghai) Polyplatic Taiwan Co., Ltd. (Taipei) WDX-00A 11