Test Report No. SH /TX Date: Oct 13, 2010 Page 1 of 12

Transcription

1 Test Report No. SH /TX Date: Oct 13, 2010 Page 1 of 12 WANHUA (CHANGZHOU) NEW MATERIALS TECHNOLOGY CO., LTD HONGYUN ROAD, WUJIN ECONOMIC DEVELOPMENT ZONE, CHANGZHOU, JIANGSU The following sample(s) was/were submitted and identified on behalf of the client as: Sample Description Manufacturer Country of Destination Test Performed : One sample of bonded PU+ polyester cutting in black for glove : WANHUA : GERMANY : Selected test(s) as requested by applicant * * * * * Sample Receiving Date : SEP. 30, 2010 Testing Period : OCT. 08, 2010 OCT. 13, 2010 Test (s) : For further details, please refer to the following page(s). Signed for and on behalf of SGS-CSTC Ltd. Kathy Dong (Account Executive)

2 Test Report No. SH /TX Date: Oct 13, 2010 Page 2 of 12 Azo Dyes Test Test Method: Polyester: According to 64 LFGB :2004 Analysis was conducted with GC-MS/HPLC-DAD. Amines (mg/kg) Client requirement / Recommended Max. Limit (mg/kg) CAS No. 4-Aminobiphenyl n.d. 20 Benzidine n.d Chloro-o-toluidine n.d Naphthylamine n.d. 20 o-aminoazotoluene n.d nitro-o-toluidine / 2-Amino-4- n.d nitrotoluene 4-Chloroaniline n.d methoxy-m-phenylenediamine / n.d ,4-Diaminoanisole 4,4'-Diaminodiphenylmethane n.d. 20 3,3'-Dichlorobenzidine n.d. 20 3,3'-Dimethoxybenzidine n.d. 20 3,3'-Dimethybenzidine n.d. 20 4,4'-methylenedi-o-toluidine / n.d. 20 3,3'-Dimethyl-4,4'- diaminodiphenylmethane p-cresidine n.d. 20 4,4'-Methylene-bis-(2-chloroaniline) n.d. 20 4,4'-Oxydianiline n.d. 20 4,4'-Thiodianiline n.d. 20 o-toluidine n.d methyl-m-phenylenediamine / n.d ,4-Toluylendiamine 2,4,5-Trimethylaniline n.d aminoazobenzene n.d. 20 O-Anisidine n.d. 20 Conclusion Pass Note: n.d. = not detected Detection Limit = 5 mg/kg (for individual compound)

3 Test Report No. SH /TX Date: Oct 13, 2010 Page 3 of 12 Remark: Test result for 4-aminoazobenzene (CAS no.: ) is considered as not detected (i.e. <5mg/kg) since both aniline and/or 1,4-phenylenediamine is not found (i.e. <5mg/kg) by mentioned test method ph Value in Textile (DIN EN ISO 3071:2006, 0.1mol/l KCL extraction) 6.7 Free Formaldehyde Content (DIN EN ISO ) (mg/ kg) Note: (1) = Not Detectable (2) Detection Limit = 20 mg/ kg Cadmium Test Method: With reference to EN 1122: 2001, Method B, analysis was performed by ICP-OES. Cadmium (Cd) Method Detection Limit = 2mg/kg = Not Detected(< MDL) Cadmium Reference Information: Entry 23 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC) No 1907/2006 (previously restricted under Directive 91/338/EEC). i) Products containing Cadmium and its compounds are prohibited if their Cadmium content (expressed as Cd metal) exceeds 0.01% by mass of the polymer material and paints listed in 91/338/EEC. ii) The placing on the market of cadmium-plated articles or components of such articles used in the sectors/applications such as equipment and machinery for the production of food, agriculture, cooling and freezing, printing and book-binding, household goods, furniture, sanitary ware, central heating and air conditioning plant, paper and board, textiles and clothing, industrial handling equipment and machinery, road and agricultural vehicles, rolling stock, and vessels listed in 91/338/EEC is prohibited. Please refer to Regulation (EC) No 552/2009 to get more detail information

4 Test Report No. SH /TX Date: Oct 13, 2010 Page 4 of 12 Extractable Heavy metal Test Method: Heavy metals are extracted by acid perspiration solution according to ISO 105/E04, analysis was performed by ICP-MS and UV-VIS Arsenic (As) Cadmium (Cd) Cobalt (Co) Chromium (Cr) Nickel (Ni) Lead (Pb) Copper (Cu) Mercury (Hg) Antimony (Sb) Chromium VI (Cr VI) MDL (Method Detection Limit): Arsenic = 0.1 mg/kg Cadmium = 0.05 mg/kg Cobalt = 0.5 mg/kg Nickel = 0.5 mg/kg Lead = 0.1 mg/kg Copper = 5.0 mg/kg Antimony = 1.0 mg/kg Mercury = 0.01 mg/kg Chromium (total) = 0.5 mg/kg Chromium VI=0.5mg/kg = Not Detected (< MDL) Lead Test Method: With reference to US EPA Method 3052:1996, analysis was performed by ICP-OES. Lead (Pb) MDL(Method Detection Limit)=2mg/kg =Not Detected

5 Test Report No. SH /TX Date: Oct 13, 2010 Page 5 of 12 Pentachlorophenol (PCP), Tetrachlorophenol (TeCP) Test Method: With reference to LFGB 64 BVL B :2001, analysis was performed by GC-ECD. Pentachlorophenol (PCP) 2,3,4,5-Tetrachlorophenol (2,3,4,5-TeCP) 2,3,5,6-Tetrachlorophenol (2,3,5,6-TeCP) 2,3,4,6-Tetrachlorophenol (2,3,4,6-TeCP) Method Detection Limit = 0.5mg/kg = Not Detected(< MDL) Pentachlorophenol (PCP) Reference Information: Entry 22 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC) No 1907/2006 (previously restricted under Directive 1999/51/EC): Shall not be placed on the market, or used: - as a substance, - as a constituent in other substances, or in mixtures, in a concentration equal to or greater than 0.1 % by weight. Please refer to Regulation (EC) No 552/2009 to get more detail information O-phenylphenole (OPP) Test Method: In-house method (SHTC-CHEM-SOP-206-T), analysis was performed by GC-MS. CAS_NO O-phenylphenol (OPP) Notes : Method Detection Limit = 0.5mg/kg = Not Detected(< MDL)

6 Test Report No. SH /TX Date: Oct 13, 2010 Page 6 of 12 phthalates Test Method: With reference to ASTM D 3421: 1975, analysis was performed by GC-MS. Dibutyl Phthalate (DBP) Benzylbutyl Phthalate (BBP) Bis-(2-ethylhexyl) Phthalate (DEHP) Diisononyl Phthalate (DINP) Di-n-octyl Phthalate (DNOP) Diisodecyl Phthalate (DIDP) Total (DBP+BBP+DEHP+DINP+DNOP+DIDP) Notes : MDL(Method Detection Limit): DBP, BBP, DEHP and DNOP = 0.003% (for individual compound) DINP and DIDP = 0.01% (for individual compound) = Not Detected(< MDL) DBP,BBP,DEHP Reference information: Entry 51 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC) No 1907/2006 (previously restricted under Directive 2005/84/EC): i) Shall not be used as substances or in mixtures, in concentrations greater than 0,1 % by weight of the plasticised material, in toys and childcare articles. ii) Toys and childcare articles containing these phthalates in a concentration greater than 0.1 % by weight of the plasticised material shall not be placed on the market. Please refer to Regulation (EC) No 552/2009 to get more detail information DINP, DNOP, DIDP Reference information: Entry 52 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC) No 1907/2006 (previously restricted under Directive 2005/84/EC). i) Shall not be used as substances or in mixtures, in concentrations greater than 0.1 % by weight of the plasticised material, in toys and childcare articles which can be placed in the mouth by children. ii) Such toys and childcare articles containing these phthalates in a concentration greater than 0.1 % by weight of the plasticised material shall not be placed on the market. Please refer to Regulation (EC) No 552/2009 to get more detail information

7 Test Report No. SH /TX Date: Oct 13, 2010 Page 7 of 12 Organic-tin compounds Test Method: With reference to ISO 17353: 2004 with carbamate, analysis was performed by GC-MS. Dibutyl tin (DBT) Tributyl tin (TBT) Dioctyl tin (DOT) Triphenyl tin (TPT) 6.6 mg/kg MDL(Method Detection Limit)=0.02mg/kg = Not Detected(< MDL) Organostannic compounds Reference Information: Entry 20 of Regulation (EC) No 552/2009 and 276/2010 amending Annex XVII of REACH Regulation (EC) No 1907/2006 (previously restricted under Directive 2002/62/EC and 2009/425/EC) (a) Shall not be placed on the market, or used, as substances or in mixtures where the substance or mixture is acting as biocide in free association paint. (b) Shall not be placed on the market, or used, as substances or in mixtures where the substance or mixture acts as biocide to prevent the fouling by micro-organisms, plants or animals of: (b-1) all craft irrespective of their length intended for use in marine, coastal, estuarine and inland waterways and lakes; (b-2) cages, floats, nets and any other appliances or equipment used for fish or shellfish farming; (b-3) any totally or partly submerged appliance or equipment. (c) Shall not be placed on the market, or used, as substances or in mixtures where the substance or mixture is intended for use in the treatment of industrial waters. (d) TBT and TPT compounds shall not be used after 1 July 2010 in articles where the concentration in the article, or part thereof, is greater than the equivalent of 0.1% by weight of tin; otherwise, articles shall not be placed on the market. (e) DBT compounds shall not be used after 1 January 2012 in mixtures and articles for supply to the general public where the concentration in the mixture or the article, or part thereof, is greater than the equivalent of 0.1% by weight of tin; otherwise, articles and mixtures shall not be placed on the market. (f) DOT compounds shall not be used after 1 January 2012 in some textile, childcare article etc. for supply to, or use by, the general public, where the concentration in the article, or part thereof, is greater than the equivalent of 0.1% by weight of tin; otherwise, articles shall not be placed on the market. Please refer to Regulation (EC) No 552/2009 and 276/2010 to get more detail information

8 Test Report No. SH /TX Date: Oct 13, 2010 Page 8 of 12 Chlorinated Organic Carriers Test Method: With reference to DIN 54232:2007, analysis was conducted with GC-MS. Sum of chlorinated organic carriers 2-Chlorotoluene 3-Chlorotoluene 4-Chlorotoluene 1,3-Dichlorobenzene 1,4-Dichlorobenzene 1,2-Dichlorobenzene 2,4-Dichlorotoluene 2,5-Dichlorotoluene 2,6-Dichlorotoluene 1,3,5-Trichlorobenzene 2,3-Dichlorotoluene / 3,4-Dichlorotoluene 1,2,4-Trichlorobenzene 1,2,3-Trichlorobenzene 2,4,5-Trichlorotoluene 2,3,6-Trichlorotoluene 1,2,3,5-Tetrachlorobenzene 1,2,4,5-Tetrachlorobenzene 1,2,3,4-Tetrachlorobenzene Pentachlorobenzene Pentachlorotoluene Hexachlorobenzene 3.5 mg/kg# 3.5 mg/kg MDL(Method Detection Limit)=0.1mg/kg(for individual compound) = Not Detected(< MDL) Recommended Max. Limit :1.0mg/kg (sum) #=Exceed the limit.

9 Test Report No. SH /TX Date: Oct 13, 2010 Page 9 of 12 Polynuclear Aromatic Hydrocarbons (PAHs) Test Method: With reference to ZEK : 2008, analysis was performed by GC-MS. Total 16 PAHs Naphthalene(NAP) Acenaphthylene(ANY) Acenaphthene(ANA) Fluorene(FLU) Phenanthrene(PHE) Anthracene(ANT) Fluoranthene(FLT) Pyrene(PYR) Benzo(a)anthracene(BaA) Chrysene(CHR) Benzo(b)fluoranthene(BbF) Benzo(k)fluoranthene(BkF) Benzo(a)pyrene(BaP) Indeno(1,2,3-c,d)pyrene(IPY) Dibenzo(a,h)anthracene(DBA) Benzo(g,h,i)perylene(BPE) 3.4 mg/kg 1.6 mg/kg 1.1 mg/kg 0.7 mg/kg MDL(Method Detection Limit)=0.2mg/kg(for individual compound) = Not Detected(< MDL) ZEK : Restraining maximum values for products Parameter Category 1 Category 2 Category 3 Material indented to be put in Materials those are not Materials those are not the mouth or material for toys included in Category 1, included in Category 1 or with normal skin contact for with predictable contact 2, with predictable skin children aged < 36 months with the skin longer than contact up to 30 s 30 s. (long-term skin (short-term skin contact). contact) Benzo[a]pyrene <MDL (<0.2)*** 1 20 (mg/kg) Sum of 16 PAH(US <MDL (<0.2)*** EPA) (mg/kg)**

10 Test Report No. SH /TX Date: Oct 13, 2010 Page 10 of 12 Remark : ** = Only PAH substances >0.2 mg/kg are taken into account while calculating the sum of PAHs *** = In case that the maximum values exceed the limits of category 1, but are within the limits of category 2, one may confirm the suitability of the tested material which is indented to be put in the mouth by additional specific migration tests of PAH components based on DIN EN 1186ff and 64 LFGB The conclusion of the migration test results must be made based on food law criteria. Carcinogenic Dyes Test Method : With reference to DIN 54231:2005, analysis was performed by HPLC-DAD-MSD. CAS_NO Acid Red (CI No: 16150) Basic Red (CI No: 42500) Direct Black (CI No: 30235) Direct Blue (CI No: 22610) Direct Red (CI No: 22120) Basic Violet (CI No: 42510) Disperse Orange (CI No: 60700) Disperse Blue (CI No: 64500) Disperse Yellow (CI No: 11855) Notes : MDL(Method Detection Limit)=1mg/L = Not Detected(< MDL)

11 Test Report No. SH /TX Date: Oct 13, 2010 Page 11 of 12 Allergenic Dyes Test Method : With reference to DIN 54231:2005, analysis was performed by HPLC-DAD-MSD. CAS_NO Disperse Blue (CI No ) Disperse Blue (CI No: 61505) Disperse Blue (CI No: 62500) Disperse Blue (CI No: 63305) Disperse Blue 35 (CI No: 42500) Disperse Blue Disperse Blue Disperse Blue Disperse Brown Disperse Orange (CI No: 11080) Disperse Orange (CI No: 11005) Disperse Orange 37/ (CI No: 11132) Disperse Red (CI No: 11110) Disperse Red (CI No: 62015) Disperse Red (CI No: 11210) Disperse Yellow (CI No: 10345) Disperse Yellow (CI No: 11855) Disperse Yellow (CI No: 10375) Disperse Yellow Disperse Yellow

12 Test Report No. SH /TX Date: Oct 13, 2010 Page 12 of 12 Notes : The CAS number of Disperse Blue 35: and MDL(Method Detection Limit)=1mg/L = Not Detected(< MDL) ***End of Report***