Test Report. No. CANEC Date: 23 Mar Page 1 of 6.

Transcription

1 Test Report. No. CANEC Date: 23 Mar Page 1 of 6. DONGGUAN CITY EATTO ELECTRONIC MATERIAL.CO.,LTD. GANGWAN INDUSTRIAL, XINWAN,HUMEN TOWN,DONGGUAN CHINA SUZHOU CITY EATTO ELECTRONIC MATERIAL CO.,LTD. NO.69 YAOFENG ROAD MUDU TOWN WUZHONG DISTRICT.. The following sample(s) was/were submitted and identified on behalf of the clients as : EPOXY. SGS Job No. : Model No. :. CP GZ. E-500. Lot No. : Client Ref. Info. :. SEE REMARK. Date of Sample Received :. 20 Mar Testing Period :. 20 Mar Mar Test Requested :. Test Method :. Test Results :. Conclusion :. Selected test(s) as requested by client.. Please refer to next page(s).. Please refer to next page(s).. Based on the performed tests on submitted samples, the results of Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated diphenyl ethers (PBDE) comply with the limits as set by RoHS Directive 2011/65/EU Annex II; recasting 2002/95/EC.. Signed for and on behalf of SGS-CSTC Ltd.. Silva Zhou. Approved Signatory.

2 Test Report. No. CANEC Date: 23 Mar Page 2 of 6. Test Results :. Test Part Description :. Specimen No.. SGS Sample ID. Description. 1. CAN Black solid material. Remarks :. (1) 1 mg/kg = 1 ppm = %. (2) MDL = Method Detection Limit. (3) ND = Not Detected ( < MDL ). (4) "-" = Not Regulated. RoHS Directive 2011/65/EU. Test Method :. With reference to IEC 62321:2008 (1) Determination of Cadmium by ICP-OES. (2) Determination of Lead by ICP-OES. (3) Determination of Mercury by ICP-OES. (4) Determination of Hexavalent Chromium by Colorimetric Method using UV-Vis. (5) Determination of PBBs / PBDEs content by GC-MS.. Test Item(s). Limit. Unit. MDL Cadmium (Cd). 100 mg/kg. 2 ND Lead (Pb). 1,000 mg/kg. 2 ND Mercury (Hg). 1,000 mg/kg. 2 ND Hexavalent Chromium (CrVI). 1,000 mg/kg. 2 2 Sum of PBBs. 1,000 mg/kg. - ND Monobromobiphenyl. - mg/kg. 5 ND Dibromobiphenyl. - mg/kg. 5 ND Tribromobiphenyl. - mg/kg. 5 ND Tetrabromobiphenyl. - mg/kg. 5 ND Pentabromobiphenyl. - mg/kg. 5 ND Hexabromobiphenyl. - mg/kg. 5 ND Heptabromobiphenyl. - mg/kg. 5 ND Octabromobiphenyl. - mg/kg. 5 ND Nonabromobiphenyl. - mg/kg. 5 ND Decabromobiphenyl. - mg/kg. 5 ND Sum of PBDEs. 1,000 mg/kg. - ND Monobromodiphenyl ether. - mg/kg. 5 ND

3 Test Report. No. CANEC Date: 23 Mar Page 3 of 6. Test Item(s). Limit. Unit. MDL Dibromodiphenyl ether. - mg/kg. 5 ND Tribromodiphenyl ether. - mg/kg. 5 ND Tetrabromodiphenyl ether. - mg/kg. 5 ND Pentabromodiphenyl ether. - mg/kg. 5 ND Hexabromodiphenyl ether. - mg/kg. 5 ND Heptabromodiphenyl ether. - mg/kg. 5 ND Octabromodiphenyl ether. - mg/kg. 5 ND Nonabromodiphenyl ether. - mg/kg. 5 ND Decabromodiphenyl ether. - mg/kg. 5 ND Notes :. (1) The maximum permissible limit is quoted from the directive 2011/65/EU, Annex II.

4 Test Report. No. CANEC Date: 23 Mar Page 4 of 6. REMARK : E-500Series& HL 3300ZH 3300L E-500 E E-500-D-1 E-604H-1 E-664H-1 E-516 E-500BZ E-509 E-08 E-089 E-507 E-508 E-506B E-2000K G-500 E F 3300A-1(ZH) 3300A-1(504H-1) 3300H A B K BZ 3300SH E-509-E W E E F E-600T E-600HS E H-1 E-504H AB R 3300A-1(3300A/B-K) E-506D 5090R 3300B 3300AB AB-2 E-506-CY E E500 E-500(G) E-500HB E-506-K

5 Test Report. No. CANEC Date: 23 Mar Page 5 of 6. ATTACHMENTS RoHS Testing Flow Chart 1) Name of the person who made testing: Bella Wang / Cutey Yu / Ross Zhan 2) Name of the person in charge of testing: Adams Yu / Ryan Yang 3) These samples were dissolved totally by pre-conditioning method according to below flow chart (Cr 6+ and PBBs/PBDEs test method excluded). Sample Preparation Sample Measurement Pb/Cd/Hg PBBs/PBDEs Cr 6+ Acid digestion with microwave/ hotplate Sample solvent extraction Nonmetallic material Metallic material Filtration Concentration/ Dilution of extraction solution Adding digestion reagent Positive Spot test Solution Residue Filtration Heating to 90~95 for extraction Negative Boiling water extraction ICP-OES/AAS 1) Alkali Fusion / Dry Ashing 2) Acid to dissolve GC-MS Filtration and ph adjustment Adding 1,5- diphenylcarbazide for color development UV-Vis Adding 1,5- diphenylcarbazide for color development A red color indicates the presence of Cr 6+. If necessary, confirm with UV-Vis.

6 Test Report. No. CANEC Date: 23 Mar Page 6 of 6. Sample photo:. CANEC CAN SGS authenticate the photo on original report only. *** End of Report ***.