of HASE Thickener HISOL

Transcription

1 of HASE Thickener HISOL Less syneresis Less color floating Less pigment settling Cost savings APEO free Microbe Resistant

2 Alkali Swellable Associative Thickeners HISOL

3 New thickeners HISOL 301, 303, 305, 307, 308 and 700 are HASE(hydrophobically modified alkali swellable emulsion) thickeners for water based paints, inks and putties. Compared with previous HISOL D HASE thickeners, New HISOL thickeners have excellent pigment wetting properties and show less syneresis of paints based on new HISOL thickeners during long term storage. The Main advantages of New HISOL thickener emulsions are the following. Paints thickened with HISOL 301, 303, 305, 307 and 308 thickeners show excellent syneresis and settling resistance in long term storage, and less color floating problem during drying. Paints thickened with new HISOL thickeners exhibit no remarkable viscosity change in long term storage. They are stable under tropical and freeze-thaw conditions. Paints thickened with new HISOL thickeners are highly resistant to attack by microbes and their enzymes, thereby eliminating viscosity loss. You can design more biologically stable paints. Because low dosages of new HISOL thickeners are enough to achieve the required paint viscosity, it is possible to improve water sensitivity of the paints. Paints thickened with new HISOL thickeners are less costly to achieve the same viscosity than paints thickened with HEC and other HASE thickeners. New HISOL thickeners do not contain any APEO surfactants or additives. PHYSICAL PROPERTIES Appearance : milky white liquid emulsion Solid content : 29-31% Viscosity : 50 cps max at 25 o C Sp/Gr : at 25 o C ph : Ionic charge : Anionic Surfactant : APEO Free 01 / 02

4 RHEOLOGICAL PROPERTIES High Stomer Viscosity (KU) 700 D201 D D D105 D D108 D85 D D65 Low D50 Low High Shear Viscosity(P) High Thixotropic flow Lower sagging High in can viscosity Flow & Levelling Less roll spatter High film build Comparison of HISOL HASE thickeners Grade HISOL D New HISOL Main Application Low Shear HISOL D160 HISOL D180 HISOL D201 HISOL 700 HISOL 305 Putties & Texture paints High in can viscosity paints Medium Shear HISOL D203 HISOL D108 HISOL D105 HISOL 303 HISOL 307 HISOL 301 Medium flow paints High Shear HISOL D206 HISOL 308 Good flow paints Among the low shear grades, the main application of HISOL 700 is for putties and texture paints, and HISOL 305 is for high in can viscosity paints. HISOL 301, 303 and HISOL 307 are for medium shear paints, and HISOL 308 is for good flow paints. In case of high PVC paints, the paints based on Styrene-Acrylic copolymer emulsion and Polyvinylacetate-Acrylate emulsion thickened with combination of HEC and new HISOL thickeners, they have good viscosity stability and less syneresis in long term storage. Selection Guide Product Name APEO free High in-can Viscosity Reduce color floating Reduce Syneresis Paint flow Reduce spatter Tropical stability (St*) Water resistance HISOL 700 HISOL 305 HISOL D201 HISOL D180 HISOL D160 HISOL D105 HISOL 301 HISOL D203 HISOL 303 HISOL D108 HISOL 307 HISOL D85 HISOL D206 HISOL 308 HISOL D65 HISOL D50 Highly recommended Recommended St* Styrene-Acrylic paint

5 MANUFACTURING OF THE PAINTS When new HISOL thickener emulsions meet any base, they creat a gel. To save dispersing time, it is preferable to pre-dilute the HISOL thickeners with water before adding to the paint and to agitat slowly in the tank. After adding the HISOL thickeners, appropriate (amount CA 10% based on thickener weight) of (base ammonia or AMP95) should be added to get the (ph Up to 8). If ph is low, paints show abnormal rheology and worse viscosity stability. HISOL thickener emulsions can be added not only to the grinding stage in order to raise the viscosity during the grinding, but also to the letdown stage, in order to get the desired final viscosity. But when adding in the grinding stage, it is preferable to add the AMP 95 rather than ammonia to maintain the viscosity, because of high temperature of grinding media. SAFETY AND HANDLING New HISOL thickener emulsions are slightly irritating to the skin and eyes and contact with these areas should be avoided. When handling, wear impervious rubber gloves and goggles/ facemask. For handling/operation where possible contact may occur, a safety shower and eye wash station/facility should be available. Handling should be available in well ventilated place. Use stainless steel or plastic vessel when handling. Store in a closed container between 5-40 Further detailed information can be found in MSDS. High PVC interior paints based on HISOL (Vinylacetate-Acrylic copolymer emulsion binder) Grind Let down Total Components Control3000 HV3001 HV3002 HV3003 HV3004 HV3005 Deionized water HIDIS Triton CF Mergal K Tipure R Talc # OMYA CARB Propylene glycol HISOL VC Deionized water Natrosol 250HBR(3%) HISOL HISOL HISOL HISOL HISOL Ammonia Texanol HIQUE Total PVC, % Stormer, equilibrated, KU Tropical stability (60 5days), KU ICI, poise(p) / 04

6 High PVC interior paints based oh HISOL (Styrene-Acrylic copolymer emulsion binder) Grind Let down Components Control4000 HA4001 HA4002 HA4003 HA4004 HA4005 Deionized water HIDIS Triton CF Mergal K Tipure R Talc # OMYA CARB Propylene glycol HISOL AC Deionized water Natrosol 250HBR(3%) HISOL HISOL HISOL HISOL HISOL Ammonia Texanol HIQUE Total PVC, % Stormer, equilibrated, KU Tropical stability (60 5days), KU ICI, poise(p) Medium PVC exterior paints based oh HISOL (Styrene-Acrylic copolymer emulsion binder) Grind Let down Components Control700 MP701 MP702 MP703 MP704 MP705 Deionized water HIDIS Triton CF Natrosol 250HBR(3%) Propylene glycol Megal K TRONOX CR TALC # OMYA CARB Deionized water HISOL AC HIQUE Texanol Nopco 8034L Ammonia Natrosol 250HBR(3%) HISOL HISOL HISOL HISOL HISOL Total PVC, % Stormer, equilibrated, KU Tropical stability (60 5days), KU ICI, poise(p)

7 Putties & Texture paints based on HISOL 700 Water base putty Components PU101 Grind : Deionized Water HIDIS 40 5 Triton CF10 3 Nopco NXZ 4 Mergal K Talc# Omya Carb Texture paint based Components TE 201 Grind : Deionized Water HIDIS 40 5 Triton CF10 3 Nopco NXZ 4 Mergal K TRONOX CR Omya Carb Let down : Propylene Glycol 10 Nopco NXZ 3 HISOL AC Deionized Water 5 HISOL Texanol 2 Ammonia 1.2 Let down : Propylene Glycol 10 Nopco NXZ 3 HISOL AC Deionized Water 5 HISOL Texanol 2 Ammonia 1.2 Total : 1,000,0 Solid contents(%) 73.8 Viscosity(cps) 212,000 PH 9.2 Total : 1,000,0 Solid contents(%) 67.6 Viscosity(cps) 80,000 PH 9.2 Suppliers of Raw Materials Name Function Supplier HIDIS 40 Dispersant HLC Triton CF10 Wetting Agent Dow Chemicals Nopco NXZ Defoamer San Nopco Korea Ltd. Mergal K14 Biocide Troy chemical TRONOX CR828 TiO2 TRONOX INCORPORATION Talc #400 Extender DongYang Materials Industrial Co. Ltd. Omya Carb 10 Extender Omya Korea HISOL AC115 Acrylic emulsion HLC HISOL VC200 Vinylacetate- Acrylic emulsion HLC HISOL AC53 Styrene-Acrylic emulsion HLC Texanol Coalescing agent Eastman Natrosol 250HBR Thickener Aqualon HIQUE 388 Opaque Polymer HLC 05 / 06

8 SITE OF MANUFACTORY : 1ST INDUSTRIAL ESTATE, , GONGDAN-DONG, GUMI-SI GYEONGBUK KOREA TEL , 2804 FAX HLC R&D CENTER : 1ST INDUSTRIAL ESTATE, , GONGDAN-DONG, GUMI-SI GYEONGBUK KOREA TEL FAX HLC. Ltd. Note: The statements made herein are based on our research and the research of others, and believed to be accurate. No guarantee of their accuracy is made. However, and the products discussed are sold without warranty, express or implied, including warranty of merchantability and fitness for use of this material, and upon condition that purchasers shall make own tests to determine the suitability of such products for their particular purposes. The user assumes all risk of use or handling, whether or not in accordance with any action arising of the material being supplied shall be limited to replacement of material.