INORGANIC STANDARDS CATALOG

Transcription

1 INORGANIC STANDARDS CATALOG

2

3 TABLE OF CONTENTS SINGLE ELEMENT INORGANIC ISO GUIDE 34 REFERENCE MATERIALS ISO Guide 34 CRM...9 Enviroconcentrate TM Kits...12 ICP/ICP-MS Standards...13 AA Standards...18 Ion Chromatography Standards...22 MULTI-ELEMENT INORGANIC ISO GUIDE 34 REFERENCE MATERIALS Inorganic QC Standards...25 ICP/ICP-MS Standards...26 ICP, GFAA & Ion Chromatography Standards...28 EPA Method Blends...30 Contract Laboratory Program (CLP)...38 Safe Drinking Water Act (SDWA) Standards...42 Total Organic Carbon (TOC) Standards...43 Cyanide Standards (CN)...43 ULTRACheck Blind QC Samples Blind QC Samples for Drinking Water Methods...46 Blind QC Samples for Waste Water Methods...56 Blind QC Samples for USTs, Fuels and TPH...64 Blind QC Samples from PCBs and HAPs...65 REAGENTS & BUFFERS Certified ph Buffers...67 Certified Conductivity Solutions...68 High Purity Solvent & Titrants...69

4 ULTRA SCientific When chemical analysis is performed, ULTRA Scientific offers the chemical solutions and standards that support quality results. Founded in 1976, ULTRA Scientific, Inc. is a global leader in analytical chemical solution manufacturing, offering Certified Reference Materials, QC standards, reagents, and other laboratory solutions to meet the needs of laboratory professionals worldwide. Our extensive catalog listing of chemical standards is complemented by a flexibility to manufacture custom solutions to exacting specifications. ULTRA Scientific sells products and services direct to end-user laboratories, through international and regional distribution, and under OEM partnerships with multinational instrument manufacturers. In 2012, ULTRA Scientific acquired Omnion Scientific Instruments and expanded its footprint in Food & Beverage and Petroleum Testing, as a manufacturer of analytical instrumentation and reagents for in-line process controls and nutritional labeling. Rely on ULTRA Scientific s 35+ years of technical experience in measurement science, working to provide innovative, quality products in a timely, cost-effective and efficient manner. PRODUCTS Certified Reference Materials (CRM) IQ/OQ/PQ Buffers & Reagents Reference Materials (RM) Mobile Phase Titrants & Indicators Calibration Standards Linearity Standards Diluents & Wash Solutions MARKETS Environmental Life Science Research Agricultural Diagnostic University Petrochemical Pharmaceutical Governmental Forensics Bioscience Food & Beverage Feed & Grain Industrial & Mining DistributioN Wherever you are, access ULTRA Scientific. With worldwide drop shipping capabilities from our Corporate Headquarters in Rhode Island, USA, ULTRA Scientific also operates two European sales and distribution centers and maintains close relationships with selected distributors for sales support across the globe. ULTRA Scientific Europe, GmbH PO Box Wesel, Germany ultra@ultrasci.de Office: Fax: ULTRA Scientific Italia, s.r.l. Via Fosse Ardeatine Bologna, Italy ultra@ultrasci.it Office: Fax: International Distribution Visit our website for contacts across the globe:

5 ORDERING INFORMATION Order Same Day Shipment Shipping Payment Terms and Conditions of Sales Minimum Order Satisfaction Guaranteed Warranty Technical Service Packaging Return Policy Online: Register an account at ULTRA Scientific, Inc Smith Street Phone: North Kingstown, RI Fax: United States of America Order by 3:00 p.m. Eastern Time and in-stock items can be shipped the same day if requested. Please specify Saturday delivery when required. Shipments via Federal Express or UPS. Freight forwarding and other 3PLs as required. 1) Net 30 Days 2) Mastercard, VISA, Discover, American Express 3) C.O.D. 4) Pre-Pay 5) Proforma Invoice 6) Wire Transfer Net 30 Days; FOB; North Kingstown, RI USA Prices are subject to change without notice. No minimum order is required. ULTRA Scientific standards are guaranteed to be of started specification during the life of the standard, or they will be replaced. ULTRA Scientific products are warranted to be of stated quality. No warranties are implied or expressed to merchantibility or fitness to a particular purpose. ULTRA s products are available only through ULTRA Scientific or its authorized distributors. No warranties, claims for damages, or other claims will be honored if products are purchased through unauthorized channels. Our Chemists are trained to quickly and expertly assist you with your technical inquiries, problem solving or selection of appropriate standards for a particular testing method. For Technical Service, please call OPTION #3, (M-F) 8:30 a.m. to 5:00 p.m., or tech@ultrasci.com. Standards are shipped in specially cleaned borosilicate glass ampoules, glass vials, polyethylene bottles or the most appropriate packaging to ensure product integrity. All solutions and neat chemicals offered in this catalog require D.O.T packaging. Please inspect all packages upon receipt. If material is defective or missing, please contact us immediately. If it is necessary to return material, please contact our Customer Service Department for a Return Materials Authorization (RMA). No return will be accepted without an RMA. All returned material may be subject to a 30% restocking or disposal fee. Chemicals offered by ULTRA Scientific are for research and development use only and are not for clinical use. Products in this catalog may be hazardous; they should only be used by researchers familiar with their properties. Data included in this catalog are considered correct and reliable to the best of our knowledge. Please refer to our website for up-to-date product specifications. TO ORDER FROM ULTRA SCIENTIFIC CALL VISIT solutions@ultrasci.com TRIPLE ISO CERTIFICATION ISO ISO GUIDE 34 ISO 9001

6 PRODUCTION Flexible Scale Manufacturing Neat Chemicals Single Analyte Solutions Multi Analyte Solutions Custom Solutions Extensive Compatibility and Stability Database 7,000+ Raw Materials Neat Identity and Purity Analysis Organic Synthesis DEA and ATFE Licensed Accuracy and Precision Electronic Notebook with Data Capture Class A Volumetric Glassware Balances calibrated to NIST Traceable Weights Aseptic Filling ISO Class 5 and 7 Clean Room Development and Commercialization OEM Product Formulation Custom Packaging Private Labeling QUALITY CONTROL LABORATORY ULTRA Scientific operates an ISO Accredited Quality Control Laboratory and is accredited to ISO Guide 34 as a Reference Material Producer for the manufacture of Certified Reference Materials (CRM). Rely on the expertise of our Applications Development Group for: Method Development Pre- and Post- fill Analysis Stability Testing and Protocols Homogeneity View ULTRA Scientific s Certifications and Scopes of Accreditations online at: INSTRUMENTATION Differential Scanning Calorimeter (DSC) High Performance Liquid Chromatography Triple Quad Mass Spectrometer (HPLC-MS/MS) High Performance Liquid Chromatography Single Quad Mass Spectrometer (HPLC-MS) High Performance Liquid Chromatography-Diode Array Detector/HPLC-Fluorescence Detector (HPLC-FLD) High Performance Liquid Chromatography-Diode Array Detector/HPLC-Refractive Index Detector (HPLC-RID) Gas Chromatography-Mass Spectrometer (GC-MS) Gas Chromatography-Mass Spectrometer/Gas Chromatography-Flame Ionization Detector (FID) Gas Chromatography-Electron Capture Detector (ECD)/ Gas Chromatography-Flame Ionization Detector (FID) Gas Chromatography-Flame Ionization Detector (FID) Gas Chromatography-Flame Ionization Detector/Gas Chromatography-Flame Ionization Detector (FID) UV-Vis Spectrophotometer Total Organic Carbon Analyzer (TOC) Oxidative Stability Instrument (OSI) Ion Selective Electrode Meter (ISE) Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES) Inductively Coupled Plasma-Mass Spectrometer (ICP-MS) Ion Chromatograph (IC) Cyanide Analyzer w/ UV Digester (CN) Refractometer Density Meter Auto-Titrator Karl Fisher Titrator ph/ion Meter ph/conductivity Meter 6 TOLL FREE CALL FAX

7 COMPOUNDS Acids Anilines Aroclors Aromatics Benzidines Biphenyls Controlled Substances Custom Synthesis Dioxins & Furans Explosives Fatty Acids Halocarbons Hydrocarbons Inorganics Lipids Metals Nitrosamines Organochlorides Organometallics PAHs PBBs & PCBs Pesticides Phenols Pthalates Solvents svoc Titrants TOC Toxicology Veterinary Drug VOC... and many more! ONLINE CATALOG Designed with the customer in mind, ULTRA Scientific s website is easy to use and informative. Search functions allow you to easily find the catalog items you need. If we don t have the items you need in our listings, you can request a custom quote online. You can also order our latest brochures and catalog. Need product information? Search by method, analyte, catalog number, CAS number or product line. And when you order online, ground shipping is free! Additional shipping fees for HAZMAT materials may apply. Discover the ULTRA difference order online today! CUSTOM PRODUCTS Do you need a custom defined reference material or other chemical solution? We will be happy to prepare it for you on a custom basis. Our custom standards and analytical solutions are a fast, economical way to address your specific applications. Log on to and use our convenient quotation request web page. You will receive a quote within 24 hours. Quality Control Validations: Validation Reported Value Reported Uncertainty Former Name Solutions Neats Level I ISO Guide 34 RM True (Calculated) Uchar Gravimetric Level II ISO Guide 34 RM True (Analytical) Uchar Full Validation Level III ISO Guide 34 CRM Certified Uexp ISO Guide 34 Level I: This Reference Material (RM) was gravimetrically prepared in accordance with ISO Guide 34 and under ULTRA Scientific s ISO 9001 registered Quality System. The neat materials used for this product have been verified by ULTRA s ISO laboratory and under ULTRA Scientific s ISO Guide 34 accreditation. For each analyte, the true value, with its uncertainty value calculated at the 95% confidencve level, is reported. Level II: This Reference Material (RM) was gravimetrically prepared in accordance with ISO Guide 34 and under ULTRA Scientific s ISO 9001 registered Quality System. The neat materials used for this product have been verified by ULTRA s ISO laboratory and under ULTRA Scientific s ISO Guide 34 accreditation. The analyte concentrations were verified by ULTRA s ISO accredited laboratory. For each analyte, the true value, with its uncertainty value calculated at the 95% confidence level, is reported. Level III: This Certified Reference Material (CRM) was gravimetrically prepared in accordance with ISO Guide 34 and under ULTRA Scientific s ISO 9001 registered Quality System. The neat materials used for this product have been verified by ULTRA s ISO laboratory and under ULTRA Scientific s ISO Guide 34 accreditation. The analyte concentrations were verified by ULTRA s ISO accredited laboratory. For each analyte, the certified value is reported with its uncertainty value calculated as the expanded uncertainty, in accordance with ISO Guide 35. solutions@ultrasci.com VISIT 7

8 Single Elements SINGLE ELEMENT INORGANIC STANDARDS For ICP, ICP-MS, AA, and Ion Chromatography ULTRA Scientific offers hundreds of NIST traceable inorganic products specifcially designed to meet the testing needs of EPA, TCLP, and other municipal and international testing methods. ULTRAgrade Quality Manufactured in accordance with ISO Guide 34 and under our ISO 9001 registered Quality System Analyte concentrations verified by our ISO Accredited Laboratory Starting materials have a purity of % (ICP) and 99.99% (AA), wherever possible High purity acids and ASTM Type I water (>18 megohm) Traceable to NIST SRM, wherever possible Analyzed for trace metal impurities Confirmed against an independent second-source standard Packaged in an ISO Class 7 Clean Room TABLE OF CONTENTS ULTRAGold ISO Guide 34 CRM...9 Enviroconcentrate TM Kits...12 ICP Standards...13 AA Standards...18 Anions & Cations for IC TOLL FREE CALL FAX

9 ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL ULTRAGOLD ISO GUIDE 34 CERTIFIED REFERENCE MATERIALS (CRM) As technology improves and regulatory bodies keep pace with identifying new analytes and detection limits and setting new regulatory requirements, certified reference material producers must stay ahead of the curve with better-defined standards and calibrators with validated and stated uncertainties. In the absence of ISO Guide 34 CRM, laboratory technicians assume the arduous and time-consuming task of assessing and documenting the uncertainty of calibration standards in use. ISO Guide 34 Accreditation requires the CRM manufacturer to identify and document the major components of uncertainty including homogeneity, short-term stability, long-term stability and the uncertainty due to analytical characterization. ULTRAgold fulfills international need with ISO Guide 34 CRM at ideal concentrations of 1000 and 10 ppm for a complete line of inorganic standards. All products are provided with an ISO Guide 34 Certificate Analysis, prepared according to ISO Guide 31. ULTRAGOLD ISO GUIDE 34 CRM SINGLE ELEMENT CRM 10 μg/ml Element Volume Catalog # Catalog # Aluminum (Al) ICP-313 ICP-413 Antimony (Sb) ICP-351 ICP-451 Arsenic (As) ICP-333 ICP-433 Barium (Ba) ICP-356 ICP-456 Beryllium (Be) ICP-304 ICP-404 Boron (B) ICP-305 ICP-405 Cadmium (Cd) ICP-348 ICP-448 Calcium (Ca) ICP-320 ICP-420 Chromium (Cr) ICP-324 ICP-424 Hexavalent Chromium (Cr(VI)) ICP-324A ICP-424A Copper (Cu) ICP-329 ICP-429 Cobalt (Co) ICP-327 ICP-427 Gold (Au) ICP-379 ICP-479 Iron (Fe) ICP-326 ICP-426 Lead (Pb) ICP-382 ICP-482 Lithium (Li) ICP-303 ICP-403 Manganese (Mn) ICP-325 ICP-425 Magnesium (Mg) ICP-312 ICP-412 Mercury (Hg) ICP-380 ICP-480 solutions@ultrasci.com VISIT 9

10 ULTRAGOLD ISO GUIDE 34 CRM SINGLE ELEMENT CRM (continued) 10 μg/ml Element Volume Catalog # Catalog # Molybdenum (Mo) ICP-342 ICP-442 Nickel (Ni) ICP-328 ICP-428 Phosphorus (P) ICP-315 ICP-415 Potassium (K) ICP-319 ICP-419 Selenium (Se) ICP-334 ICP-434 Silicon (Si) ICP-314 ICP-414 Silver (Ag) ICP-347 ICP-447 Sodium (Na) ICP-311 ICP-411 Strontium (Sr) ICP-338 ICP-438 Sulfur (S) ICP-316 ICP-416 Thallium (Tl) ICP-381 ICP-481 Tin (Sn) ICP-350 ICP-450 Titanium (Ti) ICP-322 ICP-422 Vanadium (V) ICP-323 ICP-423 Zinc (Zn) ICP-330 ICP-430 ANION & CATION CRM Element Volume Catalog # Ammonium ICC-451 Bromide ICC-401 Chloride ICC-402 Floride ICC-403 Free Cyanide ICC-408 Nitrate ICC-404 Phosphate ICC-405 Sulfate ICC TOLL FREE CALL FAX

11 ISO GUIDE 34 CRM DOCUMENTATION Producer Name Producer Part No. Material Name General Description ULTRAGOLD ISO GUIDE 34 CRM Instructions for Appropriate Storage Conditions Certified Property Value w/ Statement of Uncertainty Intended Use Instructions for Proper Use Period of Validity Certified by ULTRA Scientific VISIT 11

12 ENVIROCONCENTRATES TM EnviroConcentrate KITS The proven quality of ULTRA Scientific without the HAZMAT fees! High concentration (10,000 μg/ml) ULTRAgrade standards ideally suited for: Eliminating HAZMAT Fees Calibration Curve Construction At 10,000 μg/ml, dilutions can be performed to meet any additional concentrations requirements Custom Blending Convenient and economical stock solutions for preparing in-house custom blends Product numbers are listed with corresponding ICP and AA Single Element Solutions. Kit Includes: 20 ml of analyte 10,000 μg/ml 500 ml of ASTM Type I water pre-cleaned LDPE bottle for storage Yields 2 x 100 ml 1000 ppm standards Order from ULTRA Scientific Ordering is easy. Visit us online anytime designed with our customers in mind, ULTRA Scientific s website is easy to use and informative. Search functions allow you to easily find the catalog items you need. If we don t have the items you need in our listings, you can request a custom quote online. You can also call our experienced customer service representatives Monday through Friday, 8:30 am to 5:00 pm, and they can tell you what you want to know about ULTRA Scientific s products and, more importantly, your order. Online solutions@ultrasci.com Phone :30 am 5:00 pm (M-F) Fax TOLL FREE CALL FAX

13 ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL ISO GUIDE 34 REFERENCE MATERIALS for ICP/ICP-MS ULTRAgrade Quality Manufactured in accordance with ISO Guide 34 and under our ISO 9001 registered Quality System Analyte concentrations verified by our ISO Accredited Laboratory Starting materials have a purity of % (ICP), wherever possible High purity acids and ASTM Type I water (>18 megohm) Traceable to NIST SRM, wherever possible Analyzed for trace metal impurities Confirmed against an independent second-source standard Packaged in an ISO Class 7 Clean Room Single Element ICP / ICP-MS Single Element ISO GUIDE 34 RM FOR ICP/ICP-MS NIST 10,000 μg/ml Enviroconcentrate Element SRM Volume Catalog # Catalog # Kit # * Aluminum (Al) 3101 ICP-013 ICP L ICP-013-L ICP-113-L ECK-013 Antimony (Sb) 3102 / tr. tartaric ICP-051 ICP L ICP-051-L ICP-151-L ECK-051 Arsenic (As) 3103 ICP-033 ICP L ICP-033-L ICP-133-L Barium (Ba) 3104 ICP-056 ICP L ICP-056-L ICP-156-L Beryllium (Be) 3105 ICP-004 ICP L ICP-004-L ICP-104-L Bismuth (Bi) 3106 ICP-083 ICP L ICP-083-L ECK-033 ECK-056 ECK-004 Boron (B) 3107 in H 2 O / trace NH 4 OH ICP-005 ICP L ICP-005-L ICP-105-L ECK-005 Cadmium (Cd) 3108 ICP-048 ICP L ICP-048-L ICP-148-L Calcium (Ca) 3109 ICP-020 ICP L ICP-020-L ICP-120-L Cerium (Ce) 3110 ICP-058 ICP L ICP-058-L ECK-048 ECK-020 *SAVE on HAZARDOUS SHIPPING CHARGES! Refer to Pg 12 for Enviroconcentrate configurations. solutions@ultrasci.com VISIT 13

14 Single Element ICP / ICP-MS Single Element ISO GUIDE 34 RM FOR ICP/ICP-MS NIST 10,000 μg/ml Enviroconcentrate Element SRM Volume Catalog # Catalog # Kit # * Cesium (Cs) 3111 ICP-055 ICP L ICP-055-L Chromium (Cr) 3112 ICP-024 ICP L ICP-024-L ICP-124-L Hexavalent Chromium (Cr(VI)) 3112 ICP-024A in H 2 O 1 L ICP-024A-L Cobalt (Co) 3113 ICP-027 ICP L ICP-027-L ICP-127-L (continued) ECK-024 ECK-027 Copper (Cu) 3114 ICP-029 ICP L ICP-029-L ICP-129-L Dysprosium (Dy) 3115 ICP-066 ICP L ICP-066-L Erbium (Er) 3116 ICP-068 ICP L ICP-068-L Europium (Eu) 3117 ICP-063 ICP L ICP-063-L Gadolinium (Gd) 3118 ICP-064 ICP L ICP-064-L Gallium (Ga) 3119 ICP-031 ICP L ICP-031-L ECK-029 Germanium (Ge) in H 2 O / trace HF 3120 Gold (Au) in dilute HCl 3121 Hafnium (Hf) in dilute HCl 3122 ICP-032 ICP L ICP-032-L ICP-079 ICP L ICP-079-L ICP-179-L ICP-072 ICP L ICP-072-L Holmium (Ho) 3123 ICP-067 ICP L ICP-067-L Indium (In) 3124 ICP-049 ICP L ICP-049-L Iridium (Ir) in dilute HCl N/A ICP-077 ICP L ICP-077-L Iron (Fe) 3126 ICP-026 ICP L ICP-026-L ICP-126-L ECK-026 *SAVE on HAZARDOUS SHIPPING CHARGES! Refer to Pg 12 for Enviroconcentrate configurations. 14 TOLL FREE CALL FAX

15 Single Element ISO GUIDE 34 RM FOR ICP/ICP-MS NIST 10,000 μg/ml Enviroconcentrate Element SRM Volume Catalog # Catalog # Kit # * Lanthanum (La) 3127 ICP-057 ICP L ICP-057-L Lead (Pb) 3128 ICP-082 ICP L ICP-082-L ICP-182-L Lithium (Li) 3129 ICP-003 ICP L ICP-003-L ICP-103-L Lutetium (Lu) 3130 ICP-071 ICP L ICP-071-L (continued) ECK-082 ECK-003 Single Element ICP / ICP-MS Magnesium (Mg) 3131 ICP-012 ICP L ICP-012-L ICP-112-L Manganese (Mn) 3132 ICP-025 ICP L ICP-025-L ICP-125-L Mercury (Hg) 3133 ICP-080 ICP L ICP-080-L ICP-180-L ECK-012 ECK-025 ECK-080 Molybdenum (Mo) 3134 in H 2 O / trace NH 4 OH ICP-042 ICP L ICP-042-L ICP-142-L ECK-042 Neodymium (Nd) 3135 ICP-060 ICP L ICP-060-L Nickel (Ni) 3136 ICP-028 ICP L ICP-028-L ICP-128-L ECK-028 Niobium (Nb) 3137 in H 2 O / trace HF ICP-041 ICP L ICP-041-L Palladium (Pd) 3138 ICP-046 ICP L ICP-046-L Phosphorus (P) 3139 ICP-015 ICP L ICP-015-L ICP-115-L ECK-015 Platinum (Pt) 3140 in dilute HCl ICP-078 ICP L ICP-078-L ICP-178-L Potassium (K) 3141 ICP-019 ICP L ICP-019-L ICP-119-L Praseodymium (Pr) 3142 ICP-059 ICP L ICP-059-L ECK-019 Rhenium (Re) 3143 in H 2 O ICP-075 ICP L ICP-075-L *SAVE on HAZARDOUS SHIPPING CHARGES! Refer to Pg 12 for Enviroconcentrate configurations. solutions@ultrasci.com VISIT 15

16 Single Element ICP / ICP-MS Single Element ISO GUIDE 34 RM FOR ICP/ICP-MS NIST 10,000 μg/ml Enviroconcentrate Element SRM Volume Catalog # Catalog # Kit # * Rhodium (Rh) 3144 in dilute HCl ICP L Rubidium (Rb) 3145 ICP-037 ICP L ICP-037-L Ruthenium (Ru) in dilute HCl N/A ICP-044 ICP L ICP-044-L Samarium (Sm) 3147 ICP-062 ICP L ICP-062-L (continued) Scandium (Sc) 3148 ICP-021 ICP L ICP-021-L ICP-121-L Selenium (Se) 3149 ICP-034 ICP L ICP-034-L ICP-134-L Silicon (Si) 3150 ICP-014 ICP L ICP-014-L ICP-114-L ECK-034 ECK-014 Silica (SiO2) in dilute NaOH N/A ICP-014A 1 L ICP-014A-L Silver (Ag) 3151 ICP-047 ICP L ICP-047-L ICP-147-L Sodium (Na) 3152 ICP-011 ICP L ICP-011-L ICP-111-L Strontium (Sr) 3153 ICP-038 ICP L ICP-038-L ICP-138-L ECK-047 ECK-011 ECK-038 Sulfur (S) in H 2 O 3154 Tantalum (Ta) in H 2 O / trace HF 3155 Tellurium (Te) in dilute HCl 3156 ICP-016 ICP L ICP-016-L ICP-116-L ICP-073 ICP L ICP-073-L ICP-052 ICP L ICP-052-L Terbium (Tb) 3157 ICP-065 ICP L ICP-065-L Thallium (Tl) 3158 ICP-081 ICP L ICP-081-L ICP-181-L Thorium (Th) 3159 ICP-090 ICP L ICP-090-L ECK-081 *SAVE on HAZARDOUS SHIPPING CHARGES! Refer to Pg 12 for Enviroconcentrate configurations. 16 TOLL FREE CALL FAX

17 Single Element ISO GUIDE 34 RM FOR ICP/ICP-MS NIST 10,000 μg/ml Enviroconcentrate Element SRM Volume Catalog # Catalog # Kit # * Thulium (Tm) 3160 ICP-069 ICP L ICP-069-L Tin (Sn) 3161 ICP-050 ICP L ICP-050-L ICP-150-L Titanium (Ti) 3162 in dilute NH 4 OH Tungsten (W) 3163 in H 2 O / trace NH 4 OH ICP-022 ICP L ICP-022-L ICP-122-L ICP-074 ICP L ICP-074-L (continued) ECK-050 ECK-022 Single Element ICP / ICP-MS Uranium (U) 3164 ICP-092 ICP L ICP-092-L Vanadium (V) 3165 / trace HF ICP-023 ICP L ICP-023-L ICP-123-L ECK-023 Ytterbium (Yb) 3166 ICP-070 ICP L ICP-070-L Yttrium (Y) 3167 ICP-039 ICP L ICP-039-L Zinc (Zn) 3168 ICP-030 ICP L ICP-030-L ICP-130-L Zirconium (Zr) 3169 ICP-040 ICP L ICP-040-L ECK-030 *SAVE on HAZARDOUS SHIPPING CHARGES! Refer to Pg 12 for Enviroconcentrate configurations. Single Element Kit for the CLP ULTRA Scientific has assembled all the necessary elemental standards required for Contract Laboratory Program (CLP) work. Each element is ULTRAgrade quality, and traceable to a NIST SRM. Kit contains twenty-three bottles: of : aluminum (Al) calcium (Ca) magnesium (Mg) silver (Ag) antimony (Sb) chromium (Cr) manganese (Mn) sodium (Na) mercury (Hg) barium (Ba) vanadium (V) beryllium (Be) iron (Fe) potassium (K) zinc (Zn) ICPK-3 Kit solutions@ultrasci.com VISIT 17

18 Single Element AA ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL Single Element ISO GUIDE 34 RM for ATOMIC ABSORPTION (AA) ULTRAgrade Quality Manufactured in accordance with ISO Guide 34 and under our ISO 9001 registered Quality System Analyte concentrations verified by our ISO Accredited Laboratory Starting materials have a purity of 99.99% (AA), wherever possible High purity acids and ASTM Type I water (>18 megohm) Traceable to NIST SRM, wherever possible Analyzed for trace metal impurities Confirmed against an independent second-source standard Packaged in an ISO Class 7 Clean Room Single Element ISO GUIDE 34 RM for AA NIST Enviroconcentrate Element SRM Volume Catalog # Kit # * Aluminum (Al) 3101 IAA-213 IAA-013 Antimony (Sb) 3102 IAA-251 IAA-051 / tr. tartaric Arsenic (As) 3103 IAA-233 IAA-033 Barium (Ba) 3104 IAA-256 IAA-056 Beryllium (Be) 3105 IAA-204 IAA-004 Bismuth (Bi) 3106 IAA-283 IAA-083 Boron (B) 3107 IAA-205 IAA-005 in H 2 O / trace NH 4 OH Cadmium (Cd) 3108 IAA-248 IAA-048 Calcium (Ca) 3109 IAA-220 IAA-020 Cerium (Ce) 3110 IAA-258 IAA-058 Cesium (Cs) 3111 IAA-255 IAA-055 Chromium (Cr) 3112 IAA-224 IAA-024 Cobalt (Co) 3113 IAA-227 IAA-027 Copper (Cu) 3114 IAA-229 IAA-029 *SAVE on HAZARDOUS SHIPPING CHARGES! Refer to Pg 12 for Enviroconcentrate configurations. 18 TOLL FREE CALL FAX

19 Single Element ISO GUIDE 34 RM for AA (continued) NIST Enviroconcentrate Element SRM Volume Catalog # Kit # * Dysprosium (Dy) 3115 IAA-266 IAA-066 Erbium (Er) 3116 IAA-268 IAA-068 Single Element AA Europium (Eu) 3117 IAA-263 IAA-063 Gadolinium (Gd) 3118 IAA-264 IAA-064 Gallium (Ga) 3119 IAA-231 IAA-031 Germanium (Ge) 3120 IAA-232 IAA-032 in H 2 O / trace HF Gold (Au) 3121 IAA-279 in dilute HCl Hafnium (Hf) 3122 IAA-272 in dilute HCl Holmium (Ho) 3123 IAA-267 IAA-067 Indium (In) 3124 IAA-249 IAA-049 Iridium (Ir) N/A IAA-277 in dilute HCl Iron (Fe) 3126 IAA-226 IAA-026 Lanthanum (La) 3127 IAA-257 IAA-057 Lead (Pb) 3128 IAA-282 IAA-082 Lithium (Li) 3129 IAA-203 IAA-003 Lutetium (Lu) 3130 IAA-271 Magnesium (Mg) 3131 IAA-212 IAA-012 Manganese (Mn) 3132 IAA-225 IAA-025 Mercury (Hg) 3133 IAA-280 IAA-080 Molybdenum (Mo) 3134 IAA-242 IAA-042 in H 2 O / trace NH 4 OH *SAVE on HAZARDOUS SHIPPING CHARGES! Refer to Pg 12 for Enviroconcentrate configurations. solutions@ultrasci.com VISIT 19

20 Single Element AA Single Element ISO GUIDE 34 RM for AA (continued) NIST Enviroconcentrate Element SRM Volume Catalog # Kit # * Neodymium (Nd) 3135 IAA-260 IAA-060 Nickel (Ni) 3136 IAA-228 IAA-028 Niobium (Nb) 3137 IAA-241 IAA-041 in H 2 O / trace HF Palladium (Pd) 3138 IAA-246 Phosphorus (P) 3139 IAA-215 IAA-015 Platinum (Pt) 3140 IAA-278 in dilute HCl Potassium (K) 3141 IAA-219 IAA-019 Praseodymium (Pr) 3142 IAA-259 IAA-059 Rhenium (Re) 3143 IAA-275 in H 2 O Rhodium (Rh) 3144 IAA-245 in dilute HCl Rubidium (Rb) 3145 IAA-237 Ruthenium (Ru) N/A IAA-244 in dilute HCl Samarium (Sm) 3147 IAA-262 IAA-062 Scandium (Sc) 3148 IAA-221 Selenium (Se) 3149 IAA-234 IAA-034 Silicon (Si) 3150 IAA-214 IAA-014 Silver (Ag) 3151 IAA-247 IAA-047 Sodium (Na) 3152 IAA-211 IAA-011 Strontium (Sr) 3153 IAA-238 IAA-038 Sulfur (S) 3154 IAA-216 IAA-016 in H 2 O *SAVE on HAZARDOUS SHIPPING CHARGES! Refer to Pg 12 for Enviroconcentrate configurations. 20 TOLL FREE CALL FAX

21 Single Element ISO GUIDE 34 RM for AA (continued) NIST Enviroconcentrate Element SRM Volume Catalog # Kit # * Tantalum (Ta) 3155 IAA-273 IAA-073 in H 2 O / trace HF Tellurium (Te) 3156 IAA-252 IAA-052 in dilute HCl Single Element AA Terbium (Tb) 3157 IAA-265 IAA-065 Thallium (Tl) 3158 IAA-281 IAA-081 Thorium (Th) 3159 IAA-290 IAA-090 Thulium (Tm) 3160 IAA-269 Tin (Sn) 3161 IAA-250 IAA-050 Titanium (Ti) 3162 IAA-222 IAA-022 in dilute NH 4 OH Tungsten (W) 3163 IAA-274 IAA-074 in H 2 O / trace NH 4 OH Uranium (U) 3164 IAA-292 IAA-092 Vanadium (V) 3165 IAA-223 IAA-023 / trace HF Ytterbium (Yb) 3166 IAA-270 IAA-070 Yttrium (Y) 3167 IAA-239 IAA-039 Zinc (Zn) 3168 IAA-230 IAA-030 Zirconium (Zr) 3169 IAA-240 IAA-040 *SAVE on HAZARDOUS SHIPPING CHARGES! Refer to Pg 12 for Enviroconcentrate configurations. Need a custom defined chemical solution? We will be happy to prepare it for you on a custom basis. Our custom standards and analytical solutions are a fast, economical way to address your specific applications. Log on to and use our convenient quotation request web page. You will receive a quote within 24 hours. solutions@ultrasci.com VISIT 21

22 ANIonS IC ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL Anion Standards for Ion Chromatography Ion Volume Catalog # Ion Volume Catalog # Acetate ICC-014 Benzoate ICC-015 Bromate ICC-010 Bromide ICC-001 Chlorate ICC-011 Chloride ICC-002 Chlorite ICC-012 Chromate ICC-016 Citrate ICC-017 Fluoride ICC-003 Formate ICC-018 Glycolate ICC-019 Iodide ICC-020 Lactate ICC-021 Malate ICC-022 Maleate ICC-023 Nitrate ICC-004 Nitrate (as N) ICC-004A Nitrilotriacetate ICC-025 Nitrite ICC-007 Nitrite (as N) ICC-007A Oxalate ICC-026 Perchlorate ICC-013 Phosphate ICC-005 ortho-phosphate (as P) ICC-005A Phthalate ICC-027 Propionate ICC-028 Succinate ICC-029 Sulfate ICC-006 Tartrate ICC-030 Thiocyanate ICC-031 Thiosulfate ICC-032 Methanesulfonate ICC-024 Anion Mixtures for Ion Chromatography IC Anions Mixture #1 IC Anions Mixture #2 IC Detector Linearity Kit 5 Analytes chloride (Cl - ) fluoride (F - ) nitrate (NO 3 -) -3 phosphate (PO 4 ) -2 sulfate (SO 4 ) in H 2 O ICC μg/ml 20 μg/ml Analytes bromide (Br - ) chloride (Cl - ) fluoride (F - ) nitrate (NO 3 -) -3 phosphate (PO 4 ) -2 sulfate (SO 4 ) in H 2 O ICC μg/ml 400 μg/ml 600 μg/ml 400 μg/ml Kit contains five ampoules: 1 x 10 ml of each individual standard in H 2 O nitrate 5 μg/ml nitrate 10 μg/ml nitrate 25 μg/ml nitrate nitrate ICC-759 Kit 22 TOLL FREE CALL FAX

23 ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL Cation Standards for Ion Chromatography Ion Volume Catalog # Ion Volume Catalog # CATIonS IC Ammonium (NH 4+ ) ICC-101 in H 2 O Barium (Ba +2 ) ICC-102 in 0.2% HNO 3 Calcium (Ca +2 ) ICC-103 in 0.2% HNO 3 Lithium (Li + ) ICC-104 in 0.2% HNO 3 Magnesium (Mg +2 ) ICC-105 in 0.2% HNO 3 Potassium (K + ) ICC-106 in 0.2% HNO 3 Sodium (Na + ) ICC-107 in 0.1% HNO 3 Strontium (Sr +2 ) ICC-108 in 0.2% HNO 3 Cation MIXTURES for Ion Chromatography IC Cations Mixture #1 IC Cations Mixture #2 IC Cations Mixture #3 6 Analytes 4 Analytes 4 Analytes ammonium (NH 4+ ) calcium (Ca +2 ) lithium (Li + ) magnesium (Mg +2 ) potassium (K + ) sodium (Na + ) 400 μg/ml ammonium (NH 4+ ) lithium (Li + ) potassium (K + ) sodium (Na + ) in 0.2% HNO 3 ICC μg/ml barium (Ba +2 ) calcium (Ca +2 ) magnesium (Mg +2 ) strontium (Sr +2 ) in 0.2% HNO 3 ICC μg/ml 400 μg/ml 600 μg/ml in 0.2% HNO 3 ICC-300 Order from ULTRA Scientific Ordering is easy. Visit us online anytime designed with our customers in mind, ULTRA Scientific s website is easy to use and informative. Search functions allow you to easily find the catalog items you need. If we don t have the items you need in our listings, you can request a custom quote online. You can also call our experienced customer service representatives Monday through Friday, 8:30 am to 5:00 pm, and they can tell you what you want to know about ULTRA Scientific s products and, more importantly, your order. Online solutions@ultrasci.com Phone :30 am 5:00 pm (M-F) Fax solutions@ultrasci.com VISIT 23

24 MULTI-ELEMENT MULTI-ELEMENT INORGANIC STANDARDS ULTRA Scientific prepares hundreds of inorganic solutions which meet or exceed all testing requirements for use in EPA methods, the Contract Laboratory Program, and Ion Chromatography methods. ULTRAgrade Quality Manufactured in accordance with ISO Guide 34 and under our ISO 9001 registered Quality System Analyte concentrations verified by our ISO Accredited Laboratory Starting materials have a purity of % (ICP) and 99.99% (AA), wherever possible High purity acids and ASTM Type I water (>18 megohm) Traceable to NIST SRM, wherever possible Analyzed for trace metal impurities Confirmed against an independent second-source standard TABLE OF CONTENTS Inorganic QC Standards...25 ICP Calibration Standards...26 ICP, GFAA & Ion Chromatography Standards...28 ICP-MS Standards...29 EPA Method EPA Method EPA Method 6010C...36 Contract Laboratory Program (CLP) and GFAA...38 Safe Drinking Water Act (SDWA) Standards...42 Toxicity Characteristic Leaching Procedure (TCLP) Standards...42 TOC & TIC Standards...43 Cyanide Standards TOLL FREE CALL FAX

25 ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL Inorganic QC Standards Quality Control Standard #1 Quality Control Standard #2 7 Analytes 19 Analytes Combined Quality Control Standard 26 Analytes QC Standards aluminum (Al) barium (Ba) boron (B) potassium (K) silicon (Si) silver (Ag) sodium (Na) IQC-007 IQC ml Quality Control Standards Kit Kit contains two bottles: of each of the following standards IQC-007 IQC-019 IQCK Kit antimony (Sb) magnesium (Mg) manganese (Mn) beryllium (Be) molybdenum (Mo) calcium (Ca) chromium (Cr) titanium (Ti) vanadium (V) iron (Fe) zinc IQC-019 IQC ml aluminum (Al) antimony (Sb) barium (Ba) beryllium (Be) boron (B) calcium (Ca) chromium (Cr) iron (Fe) magnesium (Mg) manganese (Mn) molybdenum (Mo) potassium (K) silicon (Si) silver (Ag) sodium (Na) titanium (Ti) vanadium (V) zinc (Zn) IQC-026 IQC ml solutions@ultrasci.com VISIT 25

26 ICP Multi-Element Mixes ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL ULTRAGRADE ICP/ICP-MS MULTI-ELEMENT REFERENCE MATERIALS Compare to Merck CertiPUR Inorganic Mixes Manufactured in accordance with ISO Guide 34 and under our ISO 9001 registered Quality System Analyte concentrations verified by our ISO Accredited Laboratory Starting materials have a purity of % (ICP) and 99.99% (AA), wherever possible High purity acids and ASTM Type I water (>18 megohm) Traceable to NIST SRM, wherever possible Analyzed for trace metal impurities Confirmed against an independent second-source standard Competitive Pricing Larger Standard Size ICP CALIBRATION STANDARDS ICP Calibration Standard (I) 19 Analytes ICP Calibration Standard (IV) 23 Analytes ICP Calibration Standard (VIII) 24 Analytes aluminum (Al) barium (Ba) beryllium (Be) bismuth (Bi) boron (B) chromium (Cr) gallium (Ga) indium (In) iron (Fe) manganese (Mn) silver (Ag) strontium (Sr) zinc (Zn) ICM µg/ml 1 µg/ml 200 µg/ml 15 µg/ml 20 µg/ml 25 µg/ml 20 µg/ml 20 µg/ml 150 µg/ml 200 µg/ml 15 µg/ml 200 µg/ml 5 µg/ml 50 µg/ml 50 µg/ml 1 µg/ml 400 µg/ml 20 µg/ml aluminum (Al) barium (Ba) bismuth (Bi) boron (B) calcium (Ca) chromium (Cr) gallium (Ga) indium (In) iron (Fe) lithium (Li) magnesium (Mg) manganese (Mn) potassium (K) silver (Ag) sodium (Na) strontium (Sr) zinc (Zn) 1000 µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml aluminum (Al) barium (Ba) beryllium (Be) bismuth (Bi) boron (B) calcium (Ca) chromium (Cr) gallium (Ga) iron (Fe) lithium (Li) magnesium (Mg) manganese (Mn) potassium (K) sodium (Na) strontium (Sr) tellurium (Te) zinc (Zn) ICM-103 with trace HCl ICM TOLL FREE CALL FAX

27 ICP Calibration Standard Toxic Elements (IX) 9 Analytes beryllium (Be) chromium (VI) (Cr+6) mercury (Hg) ICM-105 ICP Calibration Standard Trace Metals (XIII) 15 Analytes aluminum (Al) beryllium (Be) chromium (Cr) iron (Fe) manganese (Mn) mercury (Hg) vanadium (V) zinc (Zn) with trace HF ICM-104 ICP Calibration Standard Earth Alkali Elements (III) 4 Analytes 500 µg/ml 25 µg/ml 5 µg/ml 25 µg/ml 250 µg/ml ICP Calibration Standard Surface Water (X) 23 Analytes barium (Ba) beryllium (Be) bismuth (Bi) boron (B) calcium (Ca) chromium (Cr) iron (Fe) magnesium (Mg) manganese (Mn) molybdenum (Mo) potassium (K) sodium (Na) strontium (Sr) vanadium (V) zinc (Zn) with trace HF ICM-106 ICP Calibration Standard HCl Soluble Elements (XVII) 7 Analytes 50 ng/ml 50 ng/ml 20 ng/ml 10 ng/ml 100 ng/ml 20 ng/ml ng/ml 20 ng/ml 25 ng/ml 20 ng/ml 100 ng/ml 25 ng/ml ng/ml 30 ng/ml 100 ng/ml 50 ng/ml 3000 ng/ml 10 ng/ml 8000 ng/ml 100 ng/ml 10 ng/ml 50 ng/ml 50 ng/ml ICP Calibration Standard Sewage Sludge (XI) 7 Analytes chromium (Cr) mercury (Hg) zinc (Zn) ICM-109 ICP Calibration Standard Quality Control (XVI) 2s antimony (Sb) beryllium (Be) calcium (Ca) chromium (Cr) iron (Fe) lithium (Li) magnesium (Mg) manganese (Mn) molybdenum (Mo) strontium (Sr) titanium (Ti) vanadium (V) zinc (Zn) 900 µg/ml 800 µg/ml 8 µg/ml 200 µg/ml 900 µg/ml 2500 µg/ml with trace HF, tartaric acid ICM-108 ICP Multi-Element Mixes barium (Ba) calcium (Ca) magnesium (Mg) strontium (Sr) ICM µg/ml 1000 µg/ml 1000 µg/ml 1000 µg/ml antimony (Sb) hafnium (Hf) iridium (Ir) tantalum (Ta) tin (Sn) titanium (Ti) zirconium (Zr) in 15% HCl with trace HNO 3, HF, tartaric ICM-107 solutions@ultrasci.com VISIT 27

28 ICP Multi-Element Mixes ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL ICP Wavelength Calibration Standard (V) 26 Analytes aluminum (Al) barium (Ba) beryllium (Be) boron (B) calcium (Ca) chromium (Cr) iron (Fe) lithium (Li) magnesium (Mg) manganese (Mn) mercury (Hg) phosphorus (P) potassium (K) scandium (Sc) sodium (Na) strontium (Sr) tellurium (Te) titanium (Ti) yttrium (Y) zinc (Zn) with trace HF ICM ml IC Cations Mixture (VII) 9 Analytes ammonium (NH 4+ ) barium (Ba +2 ) calcium (Ca +2 ) lithium (Li + ) magnesium (Mg +2 ) manganese (Mn) potassium (K + ) sodium (Na + ) strontium (Sr +2 ) ICP, GFAA & Ion Chromatography Standards 20 µg/ml 20 µg/ml 2 µg/ml 1 µg/ml 2 µg/ml 2 µg/ml 2 µg/ml 2 µg/ml 2 µg/ml 20 µg/ml 2 µg/ml 1 µg/ml 1 µg/ml 5 µg/ml 5 µg/ml 1 µg/ml 20 µg/ml 20 µg/ml 1 µg/ml 20 µg/ml 2 µg/ml 1 µg/ml 2 µg/ml ICP Tuning Standard (XXIV) 15 Analytes aluminum (Al) barium (Ba) chromium (Cr) manganese (Mn) molybdenum (Mo) potassium (K) strontium (Sr) zinc (Zn) in 1% HNO 3 ICM ml Graphite Furnace AA Calibration Standard (XVIII) 16 Analytes aluminum (Al) antimony (Sb) barium (Ba) beryllium (Be) chromium (Cr) iron (Fe) manganese (Mn) silver (Ag) 50 µg/ml 50 µg/ml 50 µg/ml 50 µg/ml 50 µg/ml 50 µg/ml 50 µg/ml 50 µg/ml 50 µg/ml 50 µg/ml 50 µg/ml 500 µg/ml 50 µg/ml 50 µg/ml 50 µg/ml 50 µg/ml 5 µg/ml 5 µg/ml 20 µg/ml 50 µg/ml 50 µg/ml 20 µg/ml 20 µg/ml 50 µg/ml ICP Wavelength Calibration Standard (XIV) 1s lanthanum (La) lithium (Li) manganese (Mn) molybdenum (Mo) phosphorus (P) potassium (K) scandium (Sc) sodium (Na) sulfur (S) in 2% HCl with trace HNO 3 ICM ml 20 µg/ml 20 µg/ml 20 µg/ml 20 µg/ml 20 µg/ml 20 µg/ml 20 µg/ml 20 µg/ml in 0.2% HNO 3 ICC-330 with trace tartaric ICM TOLL FREE CALL FAX

29 ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL ICP-MS Standards ICP-MS Calibration Standard (XXI) 29 Analytes aluminum (Al) barium (Ba) beryllium (Be) bismuth (Bi) calcium (Ca) cesium (Cs) chromium (Cr) gallium (Ga) indium (In) iron (Fe) lithium (Li) magnesium (Mg) manganese(mn) potassium (K) rubidium (Rb) silver (Ag) sodium (Na) strontium (Sr) uranium (U) vanadium (V) zinc (Zn) IMS-102 ICP-MS Calibration Standard (VI) 30 Analytes aluminum (Al) barium (Ba) beryllium (Be) bismuth (Bi) boron (B) calcium (Ca) 1000 µg/ml chromium (Cr) gallium (Ga) iron (Fe) lithium (Li) magnesium (Mg) manganese (Mn) molybdenum (Mo) potassium (K) rubidium (Rb) silver (Ag) sodium (Na) strontium (Sr) tellurium (Te) uranium (U) vanadium (V) zinc (Zn) with trace HF IMS-120 ICP-MS Mass Calibration Standard (XXIII) 15 Analytes barium (Ba) boron (B) gallium (Ga) indium (In) iron (Fe) lithium (Li) lutetium (Lu) potassium (K) rhodium (Rh) scandium (Sc) sodium (Na) uranium (U) yttrium (Y) with trace HCl IMS ml ICP-MS Plasma Setup Solution (XX) 1s barium (Ba) cerium (Ce) germanium (Ge) magnesium (Mg) rhodium (Rh) scandium (Sc) terbium (Tb) 1 ng/ml 1 ng/ml 1 ng/ml 1 ng/ml 1 ng/ml 1 ng/ml 1 ng/ml 1 ng/ml 1 ng/ml 1 ng/ml 1 ng/ml 1 ng/ml 1 ng/ml 1 ng/ml 1 ng/ml 10 ng/ml 10 ng/ml 10 ng/ml 10 ng/ml 10 ng/ml 10 ng/ml 10 ng/ml 10 ng/ml 10 ng/ml 10 ng/ml 10 ng/ml ICP-MS Multi-Element Mixes in 1% HNO 3 with trace HF IMS-133-L 1 L Mercury ICP-MS Standard (XXI) ICP-MS Optimization Standard (XXII) 5 Analytes ICP-MS Detection Limit Standard (XIX) 5 Analytes mercury 10 μg/ml IMS-121 magnesium (Mg) rhodium (Rh) 200 ng/ml 200 ng/ml 200 ng/ml 200 ng/ml 200 ng/ml beryllium (Be) indium (In) uranium (U) 10 ng/ml 10 ng/ml 10 ng/ml 10 ng/ml 10 ng/ml in 2% HNO 3 with trace HCl IMS-131 in 1% HNO 3 IMS-132 solutions@ultrasci.com VISIT 29

30 200.7 ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL EPA Method Revisions 4.4 and 3.3 Metals and Trace Elements by ICP-AES MIXED Calibration Standards Mixed Calibration Standard (CAL I) 10 Analytes Mixed Calibration Standard (CAL II) 5 Analytes Mixed Calibration Standard (CAL III) 3 Analytes antimony (Sb) barium (Ba) boron (B) calcium (Ca) manganese (Mn) silver (Ag) 5 μg/ml 10 μg/ml 1 μg/ml 1 μg/ml 2 μg/ml 10 μg/ml 2 μg/ml 2 μg/ml 5 μg/ml 0.5 μg/ml lithium (Li) molybdenum (Mo) potassium (K) sodium (Na) strontium (Sr) 10 μg/ml in 2% HNO 3 ICM-232 Mixed Calibration Standard (CAL IV) 20 μg/ml phosphorus (P) vanadium (V) 20 μg/ml in 2% HNO 3 ICM-233 Mercury Standard (CAL IVa) in 2% HNO 3 5 Analytes ICM-231 aluminum (Al) chromium (Cr) silicon (Si) tin (Sn) zinc (Zn) 40 μg/ml mercury 20 μg/ml in 2% HNO 3 ICM-642 in 2% HNO 3 Mixed Calibration Standard (CAL V) 6 Analytes ICM-234 EPA Method Calibration Kit beryllium (Be) iron (Fe) magnesium (Mg) 10 μg/ml 20 μg/ml Kit contains six bottles: of each of the following standards ICM-231 ICM-232 ICM-233 ICM-234 ICM-235 ICM-642 ICK-230A Kit in 2% HNO 3 ICM-235 SPECTRAL INTERFERENCE CHECK STANDARDS Spectral Interference Check (SIC I) Spectral Interference Check (SIC II) 5 Analytes Spectral Interference Check (SIC III) 3 Analytes molybdenum in 2% HNO 3 ICM-241 chromium (Cr) manganese (Mn) vanadium (V) aluminum (Al) iron (Fe) in 2% HNO 3 ICM μg/ml in 2% HNO 3 ICM TOLL FREE CALL FAX

31 Standards Laboratory Performance Check Solution (LPC) A 27 Analytes aluminum (Al) barium (Ba) beryllium (Be) boron (B) calcium (Ca) chromium (Cr) iron (Fe) lithium (Li) magnesium (Mg) manganese (Mn) mercury (Hg) phosphorus (P) potassium (K) silver (Ag) sodium (Na) strontium (Sr) cerium (Ce) vanadium (V) zinc (Zn) in 2% HNO 3 ICM-240A Plasma Solution 4 Analytes 25 μg/ml Laboratory Performance Check Solution (LPC) B 5 Analytes antimony (Sb) molybdenum (Mo) silicon (Si) tin (Sn) titanium (Ti) in 2% HNO 3 ICM-240B Laboratory Fortifying Stock Solution 26 Analytes aluminum (Al) antimony (Sb) barium (Ba) beryllium (Be) boron (B) chromium (Cr) iron (Fe) lithium (Li) manganese (Mn) mercury (Hg) molybdenum (Mo) phosphorus (P) silicon (Si) silver (Ag) strontium (Sr) tin (Sn) vanadium (V) zinc (Zn) in 2% HNO 3 ICM μg/ml 25 μg/ml 25 μg/ml 25 μg/ml 5 μg/ml 25 μg/ml 10 μg/ml 25 μg/ml 10 μg/ml 25 μg/ml 25 μg/ml 25 μg/ml 25 μg/ml 25 μg/ml 5 μg/ml 10 μg/ml 25 μg/ml 25 μg/ml 25 μg/ml 2.5 μg/ml 25 μg/ml 25 μg/ml 10 μg/ml 10 μg/ml 25 μg/ml Laboratory Performance Check Solution (LPC) C 25 Analytes aluminum (Al) barium (Ba) beryllium (Be) boron (B) calcium (Ca) chromium (Cr) iron (Fe) lithium (Li) magnesium (Mg) manganese (Mn) phosphorus (P) potassium (K) silver (Ag) sodium (Na) strontium (Sr) vanadium (V) zinc (Zn) in 2% HNO 3 ICM-240C Tuning Solution 2 10 μg/ml in 2% HNO 3 ICM μg/ml continued on next 10 μg/ml in 2% HNO 3 ICM-237 solutions@ultrasci.com VISIT 31

32 200.7 Calibration Standards EPA Calibration Standard #1 5 Analytes EPA Calibration Standard #2 7 Analytes EPA Calibration Standard #3 3 Analytes ICM-202 barium (Ba) beryllium (Be) iron (Fe) manganese (Mn) vanadium (V) boron (B) molybdenum (Mo) silicon (Si) in H 2 O ICM-204 in 2% HNO 3 ICM-203 EPA Calibration Standard #4 9 Analytes aluminum (Al) calcium (Ca) chromium (Cr) magnesium (Mg) potassium (K) silver (Ag) sodium (Na) zinc (Zn) Antimony Standard antimony in 2% HNO 3 / tr. tartaric acid ICP-051 EPA Method Calibration Standards Kit Kit contains five bottles: of each of the following standards ICM-202 ICM-203 ICM-204 ICM-205 ICK-200A ICP-051 Kit ICM-205 Interference Check Standards Interference Check Standard #1 4 Analytes Antimony Standard (ICS #2) Interference Check Standard #3 16 Analytes boron (B) molybdenum (Mo) 300 μg/ml silicon (Si) 230 μg/ml titanium (Ti) in H 2 O ICM ml Interference Check Standard #4 5 Analytes aluminum (Al) 3000 μg/ml calcium (Ca) 15,000 μg/ml iron (Fe) 12, magnesium (Mg) 7 sodium (Na) 2 antimony in 2% HNO 3 / tr. tartaric acid ICP-051 EPA Method Interference Check Kit Kit contains four bottles: 50 ml of each of the following standards ICM-221 ICM-223 and of each of the following: ICP-051 ICM-224 barium (Ba) beryllium (Be) chromium (Cr) manganese (Mn) potassium (K) silver (Ag) vanadium (V) zinc (Zn) 300 μg/ml 300 μg/ml 300 μg/ml 300 μg/ml 300 μg/ml 300 μg/ml 20,000 μg/ml 300 μg/ml 300 μg/ml 300 μg/ml in 2% HNO 3 ICM-224 ICK-220A Kit ICM ml 32 TOLL FREE CALL FAX

33 Spiking Standards Spiking Addition Standard 12 Analytes Spiking Addition Standard 4 Analytes Spiking Addition Standard 3 Analytes aluminum (Al) barium (Ba) beryllium (Be) chromium (Cr) iron (Fe) manganese (Mn) silver (Ag) vanadium (V) zinc (Zn) 2000 μg/ml 2000 μg/ml 2 calcium (Ca) magnesium (Mg) potassium (K) sodium (Na) ICM ml 2000 μg/ml 10,000 μg/ml 3000 μg/ml boron (B) molybdenum (Mo) silicon (Si) with trace HF ICM ml 60 μg/ml 2000 μg/ml ICM ml Antimony Standard antimony in 2% HNO 3 / tr. tartaric acid ICP-051 Spiking Addition Standard 5 Analytes 800 μg/ml EPA Method Spiking Addition Kit Kit contains five bottles: 50 ml of each of the following standards ICM-211 ICM-212 ICM-213 ICM-215 and of the following standard ICM ml ICP-051 ICK-210A Kit Order from ULTRA Scientific Ordering is easy. Visit us online anytime designed with our customers in mind, ULTRA Scientific s website is easy to use and informative. Search functions allow you to easily find the catalog items you need. If we don t have the items you need in our listings, you can request a custom quote online. You can also call our experienced customer service representatives Monday through Friday, 8:30 am to 5:00 pm, and they can tell you what you want to know about ULTRA Scientific s products and, more importantly, your order. Online solutions@ultrasci.com Phone :30 am 5:00 pm (M-F) Fax solutions@ultrasci.com VISIT 33

34 200.8 ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL EPA Method Trace Elements by ICP-MS Standard Solution A Standard Solution B Mercury Standard 18 Analytes 2 Analytes aluminum (Al) antimony (Sb) beryllium (Be) chromium (Cr) manganese (Mn) molybdenum (Mo) thorium (Th) uranium (U) vanadium (V) zinc (Zn) 10 μg/ml 10 μg/ml 10 μg/ml 10 μg/ml 10 μg/ml 10 μg/ml 10 μg/ml 10 μg/ml 10 μg/ml 10 μg/ml 10 μg/ml 10 μg/ml 10 μg/ml 10 μg/ml 10 μg/ml 10 μg/ml 10 μg/ml barium (Ba) silver 10 μg/ml in 2% HNO 3 ICM-802 ICM ml Tuning Standard 5 Analytes beryllium (Be) magnesium (Mg) indium (In) mercury 0.5 μg/ml IMS-105 IMS ml Gold Stock Std. for Hg Analysis gold ICP-079 ICP ml in 2% HNO 3 / trace tartaric in 2% HNO 3 ICM-801 ICM ml ICM-820 ICM ml Internal Standard Mix 5 Analytes scandium (Sc) yttrium (Y) indium (In) terbium (Tb) bismuth in 2% HNO 3 ICM-810 ICM ml Individual ICP-MS Internal Standard Solutions for Method in 2% HNO 3 Standard Volume Catalog # bismuth (Bi) IMS ml IMS indium (In) IMS ml IMS scandium (Sc) IMS ml IMS terbium (Tb) IMS ml IMS yttrium (Y) IMS ml IMS TOLL FREE CALL FAX

35 ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL Additional Standards for ICP-MS ICP-MS ICP-MS Calibration Standard 17 Analytes ICP-MS Calibration Standard 29 Analytes ICP-MS Calibration Standard 12 Analytes cerium (Ce) praseodymium (Pr) dysprosium (Dy) samarium (Sm) erbium (Er) scandium (Sc) europium (Eu) terbium (Tb) gadolinium (Gd) thorium (Th) holmium (Ho) thulium (Tm) lanthanum (La) ytterbium (Yb) lutetium (Lu) yttrium (Y) neodymium 10 μg/ml IMS-101 aluminum (Al) barium (Ba) beryllium (Be) bismuth (Bi) calcium (Ca) cesium (Cs) chromium (Cr) gallium (Ga) indium (In) iron (Fe) lithium (Li) magnesium (Mg) manganese(mn) potassium (K) rubidium (Rb) silver (Ag) sodium (Na) strontium (Sr) uranium (U) vanadium (V) zinc (Zn) boron (B) germanium (Ge) molybdenum (Mo) niobium (Nb) phosphorus (P) rhenium (Re) silicon (Si) sulfur (S) tantalum (Ta) titanium (Ti) tungsten (W) zirconium 10 μg/ml in H 2 O 10 μg/ml IMS-102 ICP-MS Calibration Standard 10 Analytes antimony (Sb) platinum (Pt) gold (Au) rhodium (Rh) hafnium (Hf) ruthenium (Ru) iridium (Ir) tellurium (Te) palladium (Pd) tin 10 μg/ml in 10% HCl IMS-103 Mercury ICP-MS Standard mercury 10 μg/ml IMS-105 IMS ml ICP-MS Calibration Kit Kit contains five bottles: of each of the following standards IMS-101 IMS-102 IMS-103 IMS-104 IMS-105 IMK-109 Kit ICP-MS Tuning Solution 5 Analytes ICP-MS Verification Standard 9 Analytes beryllium (Be) indium (In) magnesium (Mg) beryllium (Be) bismuth (Bi) cerium (Ce) indium (In) magnesium (Mg) uranium 10 μg/ml in 2% HNO 3 IMS-110 IMS μg/ml in 2% HNO 3 IMS-100 solutions@ultrasci.com VISIT 35

36 6010C ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL EPA Method 6010C Inorganics by ICP - AES Calibration StandardS Mixed Standard Solution (I) 6 Analytes Mixed Standard Solution (II) 5 Analytes Mixed Standard Solution (IIa) 5 Analytes beryllium (Be) manganese (Mn) zinc (Zn) 1 1 barium (Ba) iron (Fe) vanadium (V) in 2% HNO 3 10,000 μg/ml barium (Ba) iron (Fe) vanadium (V) in 2% HNO 3 in 2% HNO 3 ICM-601 ICM ml ICM-602 ICM ml ICM-607 Mixed Standard Solution (III) 2 Analytes Mixed Standard Solution (IV) 8 Analytes Mixed Standard Solution (V) 4 Analytes molybdenum (Mo) in 2% HNO 3 ICM-603 ICM ml aluminum (Al) calcium (Ca) chromium (Cr) lithium (Li) potassium (K) sodium (Na) strontium (Sr) 20 μg/ml 20 μg/ml 400 μg/ml 10 μg/ml antimony (Sb) magnesium (Mg) silver (Ag) in 2% HNO 3 ICM-605 ICM ml in 2% HNO 3 ICM-604 ICM ml Mixed Standard Solution (VI) phosphorus in 2% HNO 3 ICP-015 ICP ml EPA Method 6010C Mixed Standard Solution Kit Kit contains six bottles: of each of the following standards ICM-601 ICM-602 ICM-603 ICM-604 ICM-605 ICP-015 ICK-600A Kit 36 TOLL FREE CALL FAX

37 Interference Check StandardS 6010C Interference Check Standard 5 Analytes Interference Check Standard 16 Analytes Interference Check Standard 5 Analytes lithium (Li) molybdenum (Mo) phosphorus (P) strontium (Sr) titanium (Ti) in 2% HNO 3 ICM-611 ICM ml 300 μg/ml 300 μg/ml barium (Ba) beryllium (Be) chromium (Cr) manganese (Mn) potassium (K) silver (Ag) vanadium (V) zinc (Zn) 300 μg/ml 300 μg/ml 300 μg/ml 300 μg/ml 300 μg/ml 300 μg/ml 20,000 μg/ml 300 μg/ml 300 μg/ml 300 μg/ml aluminum (Al) calcium (Ca) iron (Fe) magnesium (Mg) sodium (Na) in 2% HNO 3 ICM μg/ml 15,000 μg/ml 12, 7 2 ICM ml Interference Check Standard antimony in 2% HNO 3 / tr. tartaric acid ICP-051 EPA Method 6010C Interference Check Kit Kit contains four bottles: 50 ml of the following standard ICM-223 and of each of the following: ICM-611 ICP-051 ICM-224 ICK-610A Kit Need a custom defined chemical solution? We will be happy to prepare it for you on a custom basis. Our custom standards and analytical solutions are a fast, economical way to address your specific applications. Log on to and use our convenient quotation request web page. You will receive a quote within 24 hours. solutions@ultrasci.com VISIT 37

38 CLP ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL Contract Laboratory Program (CLP) Inorganics Analysis Calibration StandardS CLP ICP Calibration Standard 16 Analytes aluminum (Al) 2000 μg/ml barium (Ba) 2000 μg/ml beryllium (Be) calcium (Ca) 5000 μg/ml chromium (Cr) 2 iron (Fe) magnesium (Mg) 5000 μg/ml manganese (Mn) potassium (K) 5000 μg/ml silver (Ag) 2 sodium (Na) 5000 μg/ml vanadium (V) zinc (Zn) CLP ICP Calibration Standard antimony in 2% HNO 3 / tr. tartaric acid ICP-051 CLP ICP Calibration Standard 5 Analytes CLP ICP Calibration Kit Kit contains three bottles: of each of the following standards ICM-411 ICM-413 ICP-051 ICK-410A Kit ICM-411 ICM-413 Spiking StandardS CLP ICP Spike Standard 12 Analytes CLP ICP Spike Standard 12 Analytes CLP ICP Spike Standard 5 Analytes aluminum (Al) barium (Ba) beryllium (Be) chromium (Cr) iron (Fe) manganese (Mn) silver (Ag) vanadium (V) zinc (Zn) 2000 μg/ml 2000 μg/ml 2 antimony ICM-452 CLP ICP Spike Kit Kit contains three bottles: of each of the following standards ICM-451 ICM-452 ICM-453 ICM μg/ml 2000 μg/ml 2000 μg/ml ICM-451 ICK-450 Kit 38 TOLL FREE CALL FAX

39 Calibration Verification Standards CLP ICP Verification Standard * 16 Analytes CLP ICP Verification Standard * aluminum (Al) antimony (Sb) barium beryllium (Be) 25 μg/ml ICM-432 calcium (Ca) 2 chromium (Cr) μg/ml iron (Fe) magnesium (Mg) 2 CLP ICP Verification Standard * manganese (Mn) Analytes potassium (K) 2 silver (Ag) 125 μg/ml 2 sodium (Na) 2 vanadium (V) 2 zinc (Zn) 2 ICM-431 ICM-433 CLP ICP Verification Kit * Kit contains three bottles: of each of the following standards ICM-431 ICM-432 ICM-433 ICK-430 Kit * Meets CLP QA second-source requirements. CLP continued on next page Interference Check Standards CLP ICP Interference Check Standard 12 Analytes CLP ICP Interference Check Standard 4 Analytes CLP ILM-4.0 Interference Check Analytes Standard 16 Analytes barium (Ba) beryllium (Be) chromium (Cr) manganese (Mn) silver (Ag) vanadium (V) zinc (Zn) ICM ml aluminum (Al) 5000 μg/ml calcium (Ca) 5000 μg/ml iron (Fe) 2000 μg/ml magnesium (Mg) 5000 μg/ml ICM ml CLP ICP Interference Check Kit Kit contains two bottles: 500 ml of the following standard ICM-441 antimony (Sb) barium (Ba) beryllium (Be) chromium (Cr) manganese (Mn) silver (Ag) vanadium (V) zinc (Zn) 60 μg/ml 10 μg/ml 5 μg/ml 5 μg/ml 20 μg/ml 10 μg/ml and 50 ml of the following: ICM-442 in 2% HNO 3 ICM-443 ICK-440 Kit solutions@ultrasci.com VISIT 39

40 CLP ICP/AA Detection Limit Standards CLP ICP/AA Detection Limits Standard 9 Analytes CLP ICP/AA Detection Limits Standard CLP ICP/AA Detection Limits Standard 5 Analytes beryllium (Be) chromium (Cr) manganese (Mn) silver (Ag) vanadium (V) zinc (Zn) 300 μg/ml 800 μg/ml 400 μg/ml antimony 600 μg/ml ICM-422 ICM μg/ml ICM-421 CLP ICP/AA Detection Limits Kit Kit contains three bottles: of each of the following standards ICM-421 ICM-422 ICM-423 ICK-420 Kit Complete Standards Kits for the CLP Complete CLP Standards Kit Kit contains nineteen bottles: of each of the following standards ICM-411 ICP-051 ICM-413 ICM-421 ICM-422 ICM-423 ICM-431 ICM-432 ICM-433 ICM-451 ICM-452 ICM-453 ICM-303 and 500 ml of the following: ICM-441 and 50 ml of each of the following: ICM-442 ICM-461 ICM-462 ICM-463 ICM-464 CLP ICP Standards Kit Kit contains fourteen bottles: of each of the following standards ICM-411 ICP-051 ICM-413 ICM-421 ICM-422 ICM-423 ICM-431 ICM-432 ICM-433 ICM-451 ICM-452 ICM-453 and 500 ml of the following: ICM-441 and 50 ml of the following: ICM-442 ICPK-5A Kit ICPK-4A Kit 40 TOLL FREE CALL FAX

41 ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL Graphite Furnace AA Standards CLP CLP GFAA Standard 6 Analytes CLP GFAA Standard (Calibration Verification) 6 Analytes CLP GFAA Standard (P Spike) 6 Analytes antimony (Sb) 10 μg/ml antimony (Sb) 25 μg/ml 5 μg/ml 25 μg/ml 25 μg/ml antimony (Sb) 40 μg/ml 5 μg/ml 20 μg/ml 10 μg/ml ICM ml ICM ml ICM ml CLP GFAA Standard CLP GFAA Standard CLP GFAA Interference Check Kit 6 Analytes antimony (Sb) 120 μg/ml 20 μg/ml 10 μg/ml 20 μg/ml 10 μg/ml 20 μg/ml mercury in 2% HNO 3 ICM-303 Kit contains five bottles: 50 ml of each of the following standards ICM-461 ICM-462 ICM-463 ICM-464 and of the following: ICM-303 ICM ml ICK-460A Kit Matrix Modifiers for Graphite Furnace AA Starting Material Concentration and Matrix Volume Catalog # Palladium 2000 μg/ml in HNO 3 IMM-001 from Palladium Nitrate 5000 μg/ml in HNO 3 50 ml IMM-002 Magnesium Nitrate 10,000 μg/ml in HNO 3 IMM-003 Phosphate from Ammonium Phosphate 40,000 μg/ml in HNO 3 50 ml IMM-004 Ammonium Nitrate 10,000 μg/ml in HNO 3 50 ml IMM-005 Nickel from Nickel Nitrate 4000 μg/ml in HNO 3 50 ml IMM-007 solutions@ultrasci.com VISIT 41

42 SDWA, TCLP ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL Primary Safe Drinking Water Act Standard #1 6 Analytes Safe Drinking Water Act (SDWA) Standards Primary Safe Drinking Water Act Standard #2 Primary Safe Drinking Water Act Standard #3 chromium (Cr) silver (Ag) barium 10,000 μg/ml in 2% HNO 3 ICP-156 mercury ICM-303 in 10% HNO 3 ICM-301 Secondary Safe Drinking Water Act Standard 4 Analytes iron (Fe) manganese (Mn) zinc (Zn) in 2% HNO 3 ICM μg/ml 5 μg/ml Primary Safe Drinking Water Act Kit Kit contains three bottles: of each of the following standards ICM-301 ICP-156 ICM-303 ICK-300A Kit ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL Toxicity Characteristic Leaching Procedure (TCLP) Standards TCLP Analytes Mixture 7 Analytes barium (Ba) chromium (Cr) silver (Ag) 25 μg/ml 5 μg/ml 25 μg/ml 25 μg/ml 5 μg/ml 25 μg/ml TCLP Mercury Standard mercury 20 μg/ml in 2% HNO 3 ICM-642 ICM ml ICM-641 ICM ml 42 TOLL FREE CALL FAX

43 ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL Total Organic Carbon (TOC) & Total Inorganic Carbon (TIC) Total Organic Carbon (TOC) Standards Concentration Volume Catalog # 0.5 mg/l 250 ml IQC-111 benzoquinone in H 2 O 500 ml IQC mg/l 250 ml IQC-107 KHP in H 2 O 500 ml IQC Total Inorganic Carbon (TIC) total inorganic carbon 1000 mg/l in H 2 O ICC-033 ICC ICC-033-L 500 ml 1 L TOC, TIC, CN 10 mg/l 250 ml IQC-108 KHP in H 2 O 500 ml IQC mg/l 250 ml IQC-101 KHP in H 2 O 500 ml IQC mg/l 250 ml IQC-102 KHP in H 2 O 500 ml IQC mg/l 250 ml IQC-103 KHP in H 2 O 500 ml IQC TOC Standard (Preserved) total organic carbon in H 2 O tr. H 2 SO 4 IQC mg/l 250 mg/l 250 ml IQC-104 KHP in H 2 O 500 ml IQC mg/l 250 ml IQC-105 KHP in H 2 O 500 ml IQC ULTRA Low TOC Water water (less than 50 ppb TOC) 1000 mg/l 250 ml IQC-106 KHP in H 2 O 500 ml IQC IQC-100 IQC IQC-100-L 250 ml 500 ml 1 L ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL CYANIDE STANDARDS Free Cyanide Standard Complex Cyanide Standard cyanide (from KCN) 1000 mg/l cyanide (from K 3 Fe(CN) 6 ) 1000 mg/l in dilute NaOH in dilute NaOH ICC-008 ICC-009 solutions@ultrasci.com VISIT 43

44 ULTRAcheck ULTRACHECK BLIND QC CHECK STANDARDS ULTRAcheck is a series of blind quality control standards used to check whether or not an analytical system is in control. ULTRAcheck samples are designed to mimic real-world samples for specific EPA methods, and are run as blind samples. The analytical data generated using the method is then compared to the true values supplied with the ULTRAcheck standard. Agreement between the data generated for ULTRAcheck used as a blind sample and the true values of the ULTRAcheck standard indicates that your analytical system is in control. Use ULTRAcheck on a Regular Basis to: Train and qualify personnel Establish and maintain EPA method proficiency Verify analytical system accuracy and precision Prepare for next state or EPA environmental audit ULTRAcheck true values are provided in a separate, sealed envelope. The envelope can be sent to another site, upon your request. Data obtained using the ULTRAcheck blind sample can be immediately compared against the true values supplied. Complete instructions are included with each sample. Know Your System is in Control The analytical system is shown to be in control when the data generated for the ULTRAcheck blind sample falls within the advisory range listed on the ULTRAcheck certificate of analysis If the data generated for the ULTRAcheck blind sample does not fall within the advisory range, immediate corrective action can be taken prior to proficiency failure and loss of accreditation TABLE OF CONTENTS ULTRAcheck Documentation...45 Inorganic Blind QC for WS Drinking Water Analysis...51 Inorganic Blind QC Samples for WP/DMR-QA Non-Potable Water...56 ULTRAcheck Organic Blind QC Samples for WP Non-Potable Water Analysis...58 Non-Potable Water Analysis...60 ULTRAcheck Blind QC Samples for Underground Storage Tanks (UST), Hydrocarbon Fuels, & Total Petroleum Hydrocarbons (TPH)...64 ULTRAcheck Blind QC Samples for Aroclors...65 ULTRAcheck Blind QC Samples for the EPA Cluster Rule TOLL FREE CALL FAX

45 ULTRACHECK DOCUMENTATION Instruction Sheet Provided to the Analyst: ULTRAcheck Storage instructions Dilution instructions mimic those of PT samples List of applicable EPA Methods Sealed Certificate of Analysis: Every ULTRA single blind sample lot is assigned a unique code number Weights Traceable to NIST Advisory ranges based on EPA/NELAC specifications Analyte list with assigned values Certified by ULTRA Scientific Results sealed in envelope for security solutions@ultrasci.com VISIT 45

46 WS Inorganics ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL ULTRAcheck Blind QC Samples for WS Drinking Water Analysis Formulated to Match NELAC & US EPA WS Program Samples ULTRAcheck samples are designed to mimic real world samples for specific EPA methods, and are run as blind samples. Agreement between the data generated for ULTRAcheck used as a blind sample and the true values of the ULTRAcheck standard indicates that the analytical system is in control. ULTRAcheck true values are provided in a separate, sealed envelope. True values fall within the ranges listed for each analyte, and may vary from lot to lot. Complete instructions are included with each sample. INORGANIC BLIND QC FOR WS ULTRAcheck WS Metals #1 1s ULTRAcheck WS Metals #2 4 Analytes ULTRAcheck WS Mercury antimony (Sb) barium (Ba) beryllium (Be) chromium (Cr) 6-50 µg/l 5-50 µg/l µg/l 2-20 µg/l 2-50 µg/l µg/l µg/l µg/l µg/l µg/l 2-10 µg/l boron (B) µg/l manganese (Mn) µg/l molybdenum (Mo) µg/l zinc (Zn) µg/l Dilute 10 ml of sample to 1 L for final QCI-706B 1 x 20 ml mercury (Hg) µg/l Dilute 1 ml of sample to 1 L for final QCI-706C 1 x 5 ml Dilute 10 ml of sample to 1 L for final QCI-706A 1 x 20 ml ULTRAcheck WS Corrosivity 5 Analytes alkalinity as CaCO mg/l hardness as CaCO mg/l ph 5-10 units total filterable residue mg/l sodium mg/l Sample consists of two solutions. Dilute 10 ml of each solution to 1 L in the same flask for final QCI x 20 ml ULTRAcheck Complete Inorganic WS Drinking Water Kit Kit contains 10 samples: 1 each of the following samples WS Metals #1 WS Metals #2 WS Mercury WS Corrosivity WS Anions WS Sulfate / TOC WS Residual Free Chlorine WS Turbidity WS Free Cyanide WS Disinfection By-Products QCI-706A QCI-706B QCI-706C QCI-717 QCI-757 QCI-718 QCI-786 QCI-795 QCI-756 QCI-787 QCK-812 Kit 46 TOLL FREE CALL FAX

47 ULTRAcheck WS Anions 4 Analytes fluoride 1-8 mg/l nitrate as N 3-10 mg/l nitrite as N mg/l orthophosphate as P mg/l Sample consists of two solutions. Dilute 10 ml of each solution to 1 L in the same flask for final ULTRAcheck WS Sulfate / TOC 2 Analytes sulfate mg/l total organic carbon (TOC) mg/l Dilute 10 ml of sample to 1 L for final QCI x 20 ml ULTRAcheck WS Disinfection By-Products 4 Analytes bromate bromide chlorate chlorite 7-50 µg/l µg/l µg/l µg/l Sample consists of two solutions. Dilute 10 ml of each solution to 1 L in the same flask for final WS Inorganics QCI x 20 ml QCI x 20 ml ULTRAcheck WS Residual Free Chlorine ULTRAcheck WS Turbidity ULTRAcheck WS Cyanide (Free) residual free chlorine mg/l turbidity NTU cyanide (free) mg/l Dilute 10 ml of sample to 1 L for final QCI x 20 ml Dilute 10 ml of sample to 200 ml for final QCI x 20 ml Dilute 10 ml of sample to 1 L for final QCI x 20 ml Need a custom defined chemical solution? We will be happy to prepare it for you on a custom basis. Our custom standards and analytical solutions are a fast, economical way to address your specific applications. Log on to and use our convenient quotation request web page. You will receive a quote within 24 hours. solutions@ultrasci.com VISIT 47

48 WS Organics ORGANIC BLIND QC FOR WS ULTRAcheck WS Regulated VOCs 16-2s from the Following List: ULTRAcheck WS Unregulated VOCs Analytes from the Following List: ULTRAcheck WS Trihalomethanes 5 Analytes benzene 2-20 µg/l carbon tetrachloride 2-20 µg/l chlorobenzene 2-20 µg/l 1,2-dichlorobenzene 2-20 µg/l 1,4-dichlorobenzene 2-20 µg/l 1,2-dichloroethane 2-20 µg/l 1,1-dichloroethene 2-20 µg/l cis-1,2-dichloroethene 2-50 µg/l trans-1,2-dichloroethene 2-50 µg/l dichloromethane 5-20 µg/l 1,2-dichloropropane 2-20 µg/l ethylbenzene 2-20 µg/l styrene 2-20 µg/l tetrachloroethene 2-20 µg/l toluene 2-20 µg/l 1,2,4-trichlorobenzene 2-20 µg/l 1,1,1-trichloroethane 2-20 µg/l 1,1,2-trichloroethane 2-20 µg/l trichloroethene 2-20 µg/l vinyl chloride 2-50 µg/l xylenes (total) 2-50 µg/l Dilute 20 µl of sample to 100 ml for final QCM x 2 ml bromobenzene bromochloromethane bromomethane n-butylbenzene sec-butylbenzene tert-butylbenzene chloroethane chloromethane 2-chlorotoluene 4-chlorotoluene dibromomethane 1,3-dichlorobenzene dichlorodifluoromethane 1,1-dichloroethane 1,3-dichloropropane 2,2-dichloropropane 1,1-dichloropropene cis-1,3-dichloropropene trans-1,3-dichloropropene hexachlorobutadiene isopropylbenzene 4-isopropyltoluene n-propylbenzene 1,1,1,2-tetrachloroethane 1,1,2,2-tetrachloroethane 1,2,3-trichlorobenzene trichlorofluoromethane 1,2,3-trichloropropane 1,2,4-trimethylbenzene 1,3,5-trimethylbenzene bromodichloromethane 5-50 µg/l bromoform 5-50 µg/l chloroform 5-50 µg/l dibromochloromethane 5-50 µg/l total trihalomethanes µg/l Dilute 20 µl of sample to 100 ml for final QCM x 2 ml ULTRAcheck WS DBCP / EDB 2 Analytes 1,2-dibromo-3-chloropropane 1,2-dibromoethane µg/l each analyte Dilute 20 µl of sample to 100 ml for final QCM x 2 ml 2-50 µg/l each analyte Dilute 20 µl of sample to 100 ml for final QCM x 2 ml 48 TOLL FREE CALL FAX

49 ULTRAcheck WS Pesticides #1 10-1s from the Following List: aldrin µg/l dieldrin µg/l endrin µg/l heptachlor µg/l heptachlor epoxide µg/l hexachlorobenzene µg/l hexachlorocyclopentadiene 2-20 µg/l lindane µg/l methoxychlor 2-20 µg/l propachlor 1-10 µg/l trifluralin 1-10 µg/l ULTRAcheck WS Pesticides #2 3 Analytes alachlor 2-20 µg/l atrazine 2-20 µg/l simazine 2-20 µg/l Dilute 1 ml of sample to 1 L for final QCM x 2 ml ULTRAcheck WS Carbamates 6 Analytes aldicarb µg/l aldicarb sulfone µg/l aldicarb sulfoxide µg/l carbofuran µg/l methomyl µg/l oxamyl µg/l Dilute 1 ml of sample to 100 ml for final QCM x 2 ml WS Organics Dilute 1 ml of sample to 1 L for final QCM x 2 ml ULTRAcheck WS Herbicides ULTRAcheck WS Chlordane ULTRAcheck WS Toxaphene 8 Analytes acifluorfen 2,4-D dalapon dicamba dinoseb pentachlorophenol picloram silvex (2,4,5-TP) µg/l µg/l µg/l µg/l 7-70 µg/l 1-25 µg/l µg/l µg/l chlordane 2-20 µg/l Dilute 1 ml of sample to 1 L for final QCM x 2 ml toxaphene 2-20 µg/l Dilute 1 ml of sample to 1 L for final QCM x 2 ml Dilute 1 ml of sample to 1 L for final QCM x 2 ml ULTRAcheck WS Regulated SOCs 3 Analytes diquat 8-40 µg/l endothall µg/l glyphosate 8-40 µg/l Dilute 1 ml of sample to 1 L for final QCM x 2 ml ULTRAcheck WS PCBs Aroclor µg/l Dilute 1 ml of sample to 1 L for final QCM x 2 ml solutions@ultrasci.com VISIT 49

50 WS Inorganics Organic Blind QC Samples for WS Drinking Water Analysis ULTRAcheck WS Phthalate and Adipate 2 Analytes bis(2-ethylhexyl) adipate bis(2-ethylhexyl) phthalate 8-50 µg/l 5-50 µg/l Dilute 1 ml of sample to 1 L for final QCM x 2 ml ULTRAcheck WS Disinfection By-Products 6 Analytes bromoacetic acid bromochloroacetic acid chloroacetic acid dibromoacetic acid dichloroacetic acid trichloroacetic acid µg/l each analyte Dilute 1 ml of sample to 100 ml for final QCM x 2 ml ULTRAcheck Organic WS Drinking Water Kit Kit contains thirteen samples: 1 x 2 ml of each of the following samples Regulated VOCs Unregulated VOCs Trihalomethanes EDB/DBCP Pesticides #1 Pesticides #2 Toxaphene Chlordane PCBs Carbamates PAHs Phthalates and Adipates Herbicides QCM-115 QCM-116 QCM-125 QCM-135 QCM-211 QCM-212 QCM-220 QCM-230 QCM-249 QCM-251 QCM-311 QCM-312 QCM-501 QCK-915 Kit ULTRAcheck WS PAH ULTRAcheck WS Chloral Hydrate benzo[a]pyrene µg/l chloral hydrate 4-30 µg/l Dilute 1 ml of sample to 1 L for final QCM x 2 ml Dilute 1 ml of sample to 100 ml for final QCM-551A 1 x 2 ml Need a custom defined chemical solution? We will be happy to prepare it for you on a custom basis. Our custom standards and analytical solutions are a fast, economical way to address your specific applications. Log on to and use our convenient quotation request web page. You will receive a quote within 24 hours. 50 TOLL FREE CALL FAX

51 ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL ULTRAcheck Blind QC Samples for Drinking Water Analysis ULTRAcheck samples are designed to mimic real world samples for specific EPA methods, and are run as blind samples. Agreement between the data generated for ULTRAcheck used as a blind sample and the true values of the ULTRAcheck standard indicates that the analytical system is in control. DW Inorganics ULTRAcheck true values are provided in a separate, sealed envelope. True values fall within the ranges listed for each analyte, and may vary from lot to lot. Complete instructions are included with each sample. Inorganic Blind QC FOR DW ULTRAcheck Metals ULTRAcheck Minerals ULTRAcheck Hardness 18 Analytes 9 Analytes 3 Analytes aluminum (Al) antimony (Sb) barium (Ba) beryllium (Be) calcium (Ca) chromium (Cr) iron (Fe) manganese (Mn) mercury (Hg) silver (Ag) zinc (Zn) µg/l 6-50 µg/l 5-50 µg/l µg/l 2-20 µg/l 2-50 µg/l mg/l µg/l µg/l µg/l µg/l µg/l µg/l µg/l µg/l µg/l 2-10 µg/l µg/l alkalinity as CaCO mg/l ph 5-10 units conductivity µmhos/cm potassium 4-40 mg/l sodium mg/l chloride mg/l sulfate mg/l fluoride mg/l nitrate as N 2-25 mg/l Ready-to-use, whole volume standard QCI ml calcium (Ca) mg/l magnesium (Mg) 4-40 mg/l hardness as CaCO mg/l Ready-to-use, whole volume standard QCI ml Sample consists of two solutions. Dilute 10 ml of QCI-701A and 1 ml of QCI-701B to 2 L in the same flask for final working test sample. QCI-701 Kit solutions@ultrasci.com VISIT 51

52 DW Organics Inorganic Blind QC Samples for ICR Drinking Water Analysis ULTRAcheck ICR Minerals 5 Analytes ULTRAcheck TOC ULTRAcheck Cyanide 3 Analytes alkalinity as CaCO mg/l total organic carbon mg/l free cyanide mg/l ph 5-10 units Dilute 10 ml of sample to 2 L for final complex cyanide mg/l calcium hardness mg/l total cyanide mg/l total hardness as CaCO mg/l QCI x 10 ml Dilute 10 ml of sample to 2 L for final bromide 1-10 mg/l Ready-to-use, whole volume standard QCI x 10 ml QCI ml ULTRAcheck Solids 3 Analytes suspended solids mg/l dissolved solids mg/l total solids mg/l Ready-to-use, whole volume standard QCI ml QCI ml ULTRAcheck Nitrite nitrite as N mg/l Dilute 10 ml of sample to 1 L for final QCI x 10 ml ULTRAcheck Turbidity turbidity NTU Dilute 10 ml of sample to 1 L for final QCI x 10 ml ULTRAcheck Total Residual Chlorine total residual chlorine mg/l Dilute 10 ml of sample to 2 L for final QCI x 10 ml ULTRAcheck Complete Inorganic Drinking Water Kit Kit contains 8 samples: 1 each of the following samples Metals Minerals Nitrite Total Residual Chlorine Turbidity Solids Hardness Cyanide QCI-701 QCI-710 QCI-751 QCI-780 QCI-790 QCI-711 QCI-720 QCI-750 QCK-810 Kit 52 TOLL FREE CALL FAX

53 ORGANIC Blind QC Samples for Drinking Water Analysis ULTRAcheck Unregulated VOCs 29 Analytes bromobenzene bromomethane n-butylbenzene sec-butylbenzene tert-butylbenzene chloroethane chloroform chloromethane 2-chlorotoluene 4-chlorotoluene dibromomethane 1,3-dichlorobenzene 1,1-dichloroethane 1,3-dichloropropane 2,2-dichloropropane 1,1-dichloropropene cis-1,3-dichloropropene trans-1,3-dichloropropene hexachlorobutadiene isopropylbenzene 4-isopropyltoluene n-propylbenzene 1,1,1,2-tetrachloroethane 1,1,2,2-tetrachloroethane ULTRAcheck Regulated VOCs 23 Analytes benzene carbon tetrachloride chlorobenzene 1,2-dichlorobenzene 1,4-dichlorobenzene 1,2-dichloroethane 1,1-dichloroethene cis-1,2-dichloroethene trans-1,2-dichloroethene 1,2-dichloropropane ethylbenzene methylene chloride styrene tetrachloroethene toluene 1,2,4-trichlorobenzene 1,1,1-trichloroethane 1,1,2-trichloroethane trichloroethene vinyl chloride o-xylene m-xylene p-xylene 1-20 µg/l each analyte 1,2,3-trichlorobenzene trichlorofluoromethane 1,2,3-trichloropropane Dilute 5 µl of sample to 100 ml for final 1,2,4-trimethylbenzene QCM x 2 ml 1,3,5-trimethylbenzene ULTRAcheck Trihalomethanes 4 Analytes bromodichloromethane bromoform chloroform dibromochloromethane 1-20 µg/l each analyte Dilute 20 µl of sample to 100 ml for final QCM x 2 ml ULTRAcheck EDB/DBCP 2 Analytes 1,2-dibromo-3-chloropropane 1,2-dibromoethane 1-20 µg/l each analyte Dilute 5 µl of sample to 100 ml for final QCM x 2 ml DW Organics 1-20 µg/l each analyte ULTRAcheck Volatiles Dilute 5 µl of sample to 100 ml for final Analytes from the Following List: QCM x 2 ml benzene bromodichloromethane bromoform n-butylbenzene sec-butylbenzene tert-butylbenzene carbon tetrachloride chlorobenzene chloroform 2-chlorotoluene 4-chlorotoluene dibromochloromethane 1,2-dibromo-3-chloropropane 1,2-dibromoethane dibromomethane 1,2-dichlorobenzene 1,3-dichlorobenzene 1,4-dichlorobenzene 1,2-dichloroethane 1,1-dichloroethene cis-1,2-dichloroethene trans-1,2-dichloroethene 1,1-dichloropropene ethylbenzene isopropylbenzene 4-isopropyltoluene methylene chloride n-propylbenzene styrene 1,1,1,2-tetrachloroethane 1-20 µg/l each analyte 1,1,2,2-tetrachloroethane tetrachloroethene toluene 1,2,4-trichlorobenzene 1,1,1-trichloroethane 1,1,2-trichloroethane trichloroethene 1,2,4-trimethylbenzene 1,3,5-trimethylbenzene vinyl chloride o-xylene m-xylene p-xylene Dilute 5 µl of sample to 100 ml for final QCM x 2 ml solutions@ultrasci.com VISIT 53

54 DW Organics Organic Blind QC Samples for Drinking Water Analysis (continued) ULTRAcheck samples are designed to mimic real world samples for specific EPA methods, and are run as blind samples. Agreement between the data generated for ULTRAcheck used as a blind sample and the true values of the ULTRAcheck standard indicates that the analytical system is in control. ULTRAcheck true values are provided in a separate, sealed envelope. True values fall within the ranges listed for each analyte, and may vary from lot to lot. Complete instructions are included with each sample. ULTRAcheck Semi-Volatiles Analytes from the Following List: acenaphthylene anthracene benz[a]anthracene benzo[b]fluoranthene benzo[k]fluoranthene benzo[ghi]perylene benzo[a]pyrene bis(2-ethylhexyl) adipate bis(2-ethylhexyl) phthalate butyl benzyl phthalate dibenz[a,h]anthracene di-n-butyl phthalate diethyl phthalate dimethyl phthalate fluorene hexachlorobenzene hexachlorocyclopentadiene indeno[1,2,3-cd]pyrene pentachlorophenol phenanthrene pyrene 1-20 µg/l each analyte Dilute 1 ml of sample to 1 L for final QCM x 2 ml ULTRAcheck Pesticides 8-12 Analytes from the Following List: alachlor dieldrin aldrin endosulfan I atrazine endosulfan II a-bhc endosulfan sulfate b-bhc endrin d-bhc endrin aldehyde g-bhc (lindane) heptachlor 4,4 -DDD heptachlor epoxide 4,4 -DDE methoxychlor 4,4 -DDT µg/l each analyte Dilute 1 ml of sample to 1 L for final QCM x 2 ml ULTRAcheck Carbamate Pesticides 5-7 Analytes from the Following List: aldicarb aldicarb sulfoxide aldicarb sulfone carbaryl carbofuran methomyl propoxur µg/l each analyte Dilute 1 ml of sample to 1 L for final QCM x 2 ml 54 TOLL FREE CALL FAX

55 ULTRAcheck Pesticides #3 4 Analytes ULTRAcheck Regulated SOCs 3 Analytes ULTRAcheck Herbicides 4-7 Analytes from the Following List: DW Organics butachlor metolachlor metribuzin prometon µg/l each analyte diquat 8-40 µg/l endothall µg/l glyphosate µg/l Dilute 1 ml of sample to 1 L for final 2,4-D MCPA dalapon MCPP 2,4-DB silvex (2,4,5-TP) dinoseb 2,4,5-T µg/l each analyte Dilute 1 ml of sample to 1 L for final QCM x 2 ml Dilute 1 ml of sample to 1 L for final QCM x 2 ml QCM x 2 ml ULTRAcheck Chlordane ULTRAcheck Toxaphene ULTRAcheck PCB chlordane 2-20 µg/l toxaphene 2-20 µg/l Aroclor µg/l Dilute 1 ml of sample to 1 L for final QCM x 2 ml Dilute 1 ml of sample to 1 L for final QCM x 2 ml Dilute 1 ml of sample to 1 L for final QCM x 2 ml ULTRAcheck Organic Drinking Water Kit Kit contains seven ampoules: 1 x 2 ml of each of the following samples ULTRAcheck Organic Regulated Drinking Water Kit Kit contains eleven ampoules: 1 x 2 ml of each of the following samples Volatiles Pesticides Toxaphene Chlordane Carbamate Pesticides Semi-Volatiles Herbicides QCK-910 Kit QCM-110 QCM-210 QCM-220 QCM-230 QCM-250 QCM-310 QCM-500 Regulated Volatiles Trihalomethanes EDB/DBCP Pesticides Toxaphene Chlordane PCB Screening Carbamate Pesticides Regulated SOCs Semi-Volatiles Herbicides QCM-111 QCM-120 QCM-130 QCM-210 QCM-220 QCM-230 QCM-249 QCM-250 QCM-260 QCM-310 QCM-500 QCK-913 Kit solutions@ultrasci.com VISIT 55

56 WP/DMR-QA Inorganics ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL ULTRAcheck Blind QC Samples for WP/DMR-QA Non-Potable Water Analysis Formulated to Match NELAC & US EPA WS Program Samples ULTRAcheck samples are designed to mimic real world samples for specific EPA methods, and are run as blind samples. Agreement between the data generated for ULTRAcheck used as a blind sample and the true values of the ULTRAcheck standard indicates that the analytical system is in control. ULTRAcheck true values are provided in a separate, sealed envelope. True values fall within the ranges listed for each analyte, and may vary from lot to lot. Complete instructions are included with each sample. INORGANIC BLIND QC SAMPLES FOR WP/DMR-QA NON-POTABLE WATER ULTRAcheck WP/DMR-QA Trace Metals #1 13 Analytes ULTRAcheck WP Trace Metals #2 7 Analytes ULTRAcheck WP/DMR-QA Mercury aluminum (Al) chromium (Cr) iron (Fe) manganese (Mn) vanadium (V) zinc (Zn) µg/l µg/l µg/l µg/l µg/l µg/l µg/l µg/l µg/l µg/l µg/l µg/l µg/l antimony (Sb) µg/l beryllium (Be) µg/l molybdenum (Mo) µg/l silver (Ag) µg/l strontium (Sr) µg/l µg/l titanium (Ti) µg/l Dilute 10 ml of sample to 1 L for final QCI-705B 1 x 20 ml mercury (Hg) 3-30 µg/l Dilute 1 ml of sample to 1 L for final QCI-705C 1 x 5 ml Dilute 10 ml of sample to 1 L for final QCI-705A 1 x 20 ml ULTRAcheck Complete Inorganic WP Waste Water Kit Kit contains 12 samples: 1 each of the following samples ULTRAcheck Inorganic DMR-QA Waste Water Kit Kit contains 10 samples: 1 each of the following samples WP Trace Metals #1 WP Trace Metals #2 WP Mercury WP Minerals WP Nutrients WP Demands WP Total Residual Chlorine WP Non-Filterable Residue WP Total Cyanide WP Oil & Grease WP Total Phenolics WP ph QCI-705A QCI-705B QCI-705C QCI-715 QCI-745 QCI-735 QCI-785 QCI-716 QCI-755 QCI-770 QCI-765 QCI-713 WP Trace Metals #1 WP Mercury WP Nutrients WP Demands WP Total Residual Chlorine WP Non-Filterable Residue WP Total Cyanide WP Oil & Grease WP Total Phenolics WP ph QCK-804 Kit QCI-705A QCI-705C QCI-745 QCI-735 QCI-785 QCI-716 QCI-755 QCI-770 QCI-765 QCI-713 QCK-803 Kit 56 TOLL FREE CALL FAX

57 ULTRAcheck WP Minerals 1s calcium mg/l chloride mg/l fluoride mg/l magnesium 4-40 mg/l potassium 4-40 mg/l sodium mg/l spec. conductance µmhos/cm sulfate mg/l total dissolved solids mg/l total alkalinity as CaCO mg/l total hardness as CaCO mg/l ULTRAcheck WP/DMR-QA Nutrients 5 Analytes ammonia as N 1-20 mg/l nitrate as N 2-25 mg/l orthophosphate as P mg/l total kjeldahl nitrogen as N 3-35 mg/l total phosphorus as P mg/l Sample consists of two solutions. Dilute 10 ml of each solution to 1 L in separate flasks for final working test samples. QCI x 20 ml ULTRAcheck WP/DMR-QA Demands 4 Analytes TOC COD 5-day BOD carbonaceous BOD mg/l mg/l mg/l mg/l Dilute 20 ml of sample to 1 L for final QCI x 20 ml WP/DMR-QA Inorganics Sample consists of two solutions. Dilute 10 ml of each solution to 1 L in the same flask for final QCI x 20 ml ULTRAcheck WP/DMR-QA Oil & Grease ULTRAcheck WP/DMR-QA Total Phenolics ULTRAcheck WP/DMR-QA ph total oil & grease mg/l total phenolics mg/l ph 5-10 units Dilute 10 ml of sample to 1 L for final QCI x 10 ml Dilute 10 ml of sample to 1 L for final QCI x 20 ml Ready-to-use, whole volume standard. QCI x 250 ml ULTRAcheck WP/DMR-QA Total Residual Chlorine ULTRAcheck WP/DMR-QA Non-Filterable Residue ULTRAcheck WP/DMR-QA Total Cyanide (Complex) total residual chlorine mg/l non-filterable residue mg/l total cyanide (complex) mg/l Dilute 10 ml of sample to 1 L for final QCI x 20 ml Add 500 mg of sample to 1 L of water for final QCI x 1 gm Dilute 10 ml of sample to 1 L for final QCI x 20 ml solutions@ultrasci.com VISIT 57

58 WP Organics ULTRAcheck Organic Blind QC Samples for WP Non-Potable Water Analysis ULTRAcheck WP Volatile Halocarbons 10-1s from the Following List ULTRAcheck WP Volatile Aromatics 6 Analytes bromodichloromethane bromoform carbon tetrachloride chlorobenzene chloroform dibromochloromethane 1,2-dichloroethane methylene chloride tetrachloroethene 1,1,1-trichloroethane trichloroethene µg/l µg/l µg/l µg/l µg/l µg/l µg/l µg/l µg/l µg/l µg/l benzene µg/l 1,2-dichlorobenzene µg/l 1,3-dichlorobenzene µg/l 1,4-dichlorobenzene µg/l ethylbenzene µg/l toluene µg/l Dilute 20 µl of sample to 100 ml for final QCM x 2 ml Dilute 20 µl of sample to 100 ml for final QCM x 2 ml 58 TOLL FREE CALL FAX

59 ULTRAcheck WP Pesticides ULTRAcheck WP Chlordane ULTRAcheck Organic WP Waste Water Series Kit WP Organics 6-7 Analytes from the Following List aldrin µg/l dieldrin µg/l 4,4 -DDD 2-10 µg/l 4,4 -DDE 2-10 µg/l 4,4 -DDT 1-10 µg/l heptachlor µg/l heptachlor epoxide µg/l Dilute 1 ml of sample to 1 L for final chlordane 2-20 µg/l Dilute 1 ml of sample to 1 L for final QCM x 2 ml Kit contains four ampoules: 1 x 2 ml of each of the following samples WP Volatile Halocarbons WP Volatile Aromatics WP Pesticides WP Chlordane QCK-902 Kit QCM-105 QCM-106 QCM-205 QCM-230 QCM x 2 ml ULTRAcheck WP PCBs in Water ULTRAcheck WP PCBs in Transformer Oil Aroclor 1016/1242 Aroclor 1232 Aroclor 1248 Aroclor 1254 Aroclor µg/l; the Aroclor used is randomly selected from the above list Dilute 1 ml of solution to 1 L in for final Aroclor 1016/1242 Aroclor 1254 Aroclor mg/kg; the Aroclor used is randomly selected from the above list Dilute 1 gm of solution to 100 ml in for final QCM x 2 gm QCM x 2 ml Order from ULTRA Scientific Ordering is easy. Visit us online anytime designed with our customers in mind, ULTRA Scientific s website is easy to use and informative. Search functions allow you to easily find the catalog items you need. If we don t have the items you need in our listings, you can request a custom quote online. You can also call our experienced customer service representatives Monday through Friday, 8:30 am to 5:00 pm, and they can tell you what you want to know about ULTRA Scientific s products and, more importantly, your order. Online solutions@ultrasci.com Phone :30 am 5:00 pm (M-F) Fax solutions@ultrasci.com VISIT 59

60 NPW Inorganics ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL ULTRAcheck Blind QC Samples for Non-Potable Water Analysis ULTRAcheck samples are designed to mimic real world samples for specific EPA methods, and are run as blind samples. Agreement between the data generated for ULTRAcheck used as a blind sample and the true values of the ULTRAcheck standard indicates that the analytical system is in control. ULTRAcheck true values are provided in a separate, sealed envelope. True values fall within the ranges listed for each analyte, and may vary from lot to lot. Complete instructions are included with each sample. INORGANICS FOR NON-POTABLE WATER ANALYSIS ULTRAcheck Trace Metals 22 Analytes aluminum (Al) µg/l antimony (Sb) µg/l µg/l barium (Ba) µg/l beryllium (Be) µg/l boron (B) µg/l µg/l chromium (Cr) µg/l µg/l µg/l iron (Fe) µg/l µg/l manganese (Mn) µg/l mercury (Hg) 3-30 µg/l molybdenum (Mo) µg/l µg/l µg/l silver (Ag) µg/l strontium (Sr) µg/l µg/l vanadium (V) µg/l zinc (Zn) µg/l Sample consists of two solutions. Dilute 10 ml of QCI-700A and 1 ml of QCI-700B to 1 L in the same flask for final working test sample. QCI-700 Kit ULTRAcheck Minerals 9 Analytes alkalinity as CaCO mg/l ph 5-10 units conductivity µmhos/cm potassium 4-40 mg/l sodium mg/l chloride mg/l sulfate mg/l fluoride mg/l nitrate as N 2-25 mg/l Ready-to-use, whole volume standard QCI ml ULTRAcheck Cyanide 3 Analytes free cyanide mg/l complex cyanide mg/l total cyanide mg/l Dilute 10 ml of sample to 2 L for final QCI x 10 ml ULTRAcheck Hardness 3 Analytes calcium mg/l magnesium 4-40 mg/l hardness as CaCO mg/l Ready-to-use, whole volume standard QCI ml ULTRAcheck Total Residual Chlorine total residual chlorine mg/l Dilute 10 ml of sample to 2 L for final QCI x 10 ml ULTRAcheck Oil & Grease ULTRAcheck Phenolics ULTRAcheck ph total oil & grease mg/l total phenolics mg/l ph 5-10 units Dilute 10 ml of sample to 1 L for final QCI x 10 ml Dilute 10 ml of sample to 2 L for final QCI x 10 ml Ready-to-use, whole volume standard. QCI x 250 ml 60 TOLL FREE CALL FAX

61 ULTRAcheck Nutrients 5 Analytes ammonia as N 1-20 mg/l nitrate plus nitrite as N 2-25 mg/l phosphate as P mg/l total phosphorus as P 1-10 mg/l total Kjeldahl nitrogen as N 3-35 mg/l Sample consists of two solutions. Dilute 10 ml of each solution to 2 L in separate flasks for final working test samples. ULTRAcheck Demands 4 Analytes TOC mg/l COD mg/l 5-day BOD mg/l carbonaceous BOD mg/l Dilute 20 ml of sample to 1 L for final QCI x 20 ml ULTRAcheck Solids 3 Analytes suspended solids mg/l dissolved solids mg/l total solids mg/l Ready-to-use, whole volume standard QCI ml QCI ml NPW Inorganics QCI x 10 ml ULTRAcheck Inorganic Waste Water Kit ULTRAcheck Basic Waste Water Kit ULTRAcheck Cations Kit contains 10 samples: 1 each of the following samples Trace Metals Minerals Solids Hardness Demands Nutrients Total Cyanide Phenolics Oil & Grease Total Residual Chlorine QCK-800A Kit QCI-700 QCI-710 QCI-711 QCI-720 QCI-735 QCI-740 QCI-750 QCI-760 QCI-770 QCI-780 Kit contains 5 samples: 1 each of the following samples Minerals Solids Demands Nutrients Oil & Grease QCK-801A Kit QCI-710 QCI-711 QCI-735 QCI-740 QCI Analytes calcium (Ca) mg/l magnesium (Mg) 4-40 mg/l potassium (K) 4-40 mg/l sodium (Na) mg/l Dilute 10 ml of sample to 1 L for final QCI x 10 ml ULTRAcheck TOX total organic halides µg/l Dilute 2 ml of sample to 2 L for final QCI x 2 ml solutions@ultrasci.com VISIT 61

62 NPW Organics ORGANICS FOR NON-POTABLE WATER ANALYSIS ULTRAcheck Volatiles ULTRAcheck Base/Neutrals Analytes from the Following List: Analytes from the Following List: benzene acenaphthene bromodichloromethane anthracene bromoform benz[a]anthracene carbon tetrachloride benzo[b]fluoranthene chlorobenzene benzo[ghi]perylene chloroform benzo[a]pyrene dibromochloromethane bis(2-ethylhexyl) phthalate 1,2-dichlorobenzene 4-bromophenyl phenyl ether 1,3-dichlorobenzene butyl benzyl phthalate 1,4-dichlorobenzene chrysene 1,2-dichloroethane dibenz[a,h]anthracene 1,1-dichloroethene dibenzofuran trans-1,2-dichloroethene 1,2-dichlorobenzene 1,2-dichloropropane 1,4-dichlorobenzene ethylbenzene diethyl phthalate methylene chloride dimethyl phthalate 4-methyl-2-pentanone (MIBK) 2,4-dinitrotoluene 1,1,2,2-tetrachloroethane di-n-octyl phthalate tetrachloroethene fluoranthene toluene hexachlorobenzene 1,1,1-trichloroethane isophorone 1,1,2-trichloroethane naphthalene trichloroethene nitrobenzene 5-20 µg/l each analyte phenanthrene pyrene Dilute 5 µl of sample to 100 ml for final 1,2,4-trichlorobenzene µg/l each analyte QCM x 2 ml Dilute 1 ml of sample to 1 L for final QCM x 2 ml 62 TOLL FREE CALL FAX

63 ULTRAcheck Acids 5-8 Analytes from the Following List: 4-chloro-3-methylphenol 2-chlorophenol o-cresol 2,4-dichlorophenol 2,4-dimethylphenol 2-nitrophenol 4-nitrophenol pentachlorophenol phenol 2,4,6-trichlorophenol µg/l each analyte Dilute 1 ml of sample to 1 L for final QCM x 2 ml ULTRAcheck Pesticides 9-14 Analytes from the Following List: aldrin endosulfan I a-bhc endosulfan II b-bhc endosulfan sulfate d-bhc endrin g-bhc endrin aldehyde 4,4 -DDD heptachlor 4,4 -DDE heptachlor epoxide 4,4 -DDT methoxychlor dieldrin µg/l each analyte Dilute 1 ml of sample to 1 L for final QCM x 2 ml ULTRAcheck Chlordane chlordane 2-20 µg/l Dilute 1 ml of sample to 1 L for final QCM x 2 ml ULTRAcheck Toxaphene toxaphene 2-20 µg/l Dilute 1 ml of sample to 1 L for final QCM x 2 ml NPW Organics ULTRAcheck Organic Waste Water Series Kit ULTRAcheck Organic Water Pollution (WP) Kit ULTRAcheck PCBs Kit contains seven ampoules: 1 x 2 ml of each of the following samples Volatiles Pesticides Toxaphene Chlordane PCBs Base/Neutrals Acids QCM-100 QCM-200 QCM-220 QCM-230 QCM-240 QCM-300 QCM-400 Kit contains five ampoules: 1 x 2 ml of each of the following samples Volatiles Pesticides PCBs Base/Neutrals Acids QCK-901 Kit QCM-100 QCM-200 QCM-240 QCM-300 QCM Aroclors from the Following List: Aroclor 1016 Aroclor 1248 Aroclor 1221 Aroclor 1254 Aroclor 1232 Aroclor 1260 Aroclor µg/l each analyte Dilute 1 ml of sample to 1 L for final QCM x 2 ml QCK-900 Kit Need a custom defined chemical solution? We will be happy to prepare it for you on a custom basis. Our custom standards and analytical solutions are a fast, economical way to address your specific applications. Log on to and use our convenient quotation request web page. You will receive a quote within 24 hours. solutions@ultrasci.com VISIT 63

64 UST, Fuels, TPH ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL ULTRAcheck Gasoline ULTRAcheck Blind QC Samples for Underground Storage Tanks (UST), Hydrocarbon Fuels, & Total Petroleum Hydrocarbons (TPH) unleaded regular gasoline mg/l Dilute 1 ml of sample to 1 L for final QCM x 2 ml ULTRAcheck Diesel Fuel diesel fuel mg/l Dilute 1 ml of sample to 1 L for final QCM x 2 ml ULTRAcheck TPH In Water TPH (without fatty acids) mg/l One 250 ml whole volume sample to be analyzed for total petroleum hydrocarbons. QCM ml TPH (with fatty acids) mg/l ULTRAcheck BTEX 6 Analytes benzene ethylbenzene toluene o-xylene m-xylene p-xylene µg/l each analyte Dilute 5 µl of sample to 100 ml for final QCM x 2 ml ULTRAcheck Gasoline Additives 4 Analytes methyl tert-butyl ether (MTBE) ethylene dibromide dibromomethane 1,2-dichloroethane µg/l each analyte Dilute 1 ml of sample to 1 L for final QCM x 2 ml One 250 ml whole volume sample to be analyzed for total petroleum hydrocarbons in the presence of interfering fatty acids. QCM ml ULTRAcheck Underground Storage Tank (UST) Kit Kit contains five samples: 1 x 2 ml of each of the following samples Gasoline QCM-600 Diesel Fuel QCM-610 Gasoline Additives QCM-620 BTEX QCM-140 plus 1 x 250 ml of the following sample ULTRAcheck Hydrocarbon Fuels Kit Kit contains four ampoules: 2 x 2 ml of each of the following samples Gasoline Diesel Fuel QCK-920 Kit QCM-600 QCM-610 ULTRAcheck TPH in Water Kit Kit contains two bottles: 1 x 250 ml of each of the following samples TPH (no fatty acids) QCM-630 TPH (with fatty acids) QCM-631 QCK-922 Kit TPH (no fatty acids) QCM-630 QCK-921 Kit 64 TOLL FREE CALL FAX

65 ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL ULTRAcheck Blind QC Samples for Aroclors ULTRAcheck Aroclors in Transformer Oil Aroclor mg/kg in Transformer Oil Aroclor mg/kg in Transformer Oil QCM x 5 ml QCM x mg/kg in Transformer mg/kg in Transformer Oil QCM x 5 ml QCM x 5 ml Aroclor 1248 Aroclor 1260 ULTRAcheck PCBs in Transformer Oil 1 Aroclor from the Following List: Aroclor 1016/1242 Aroclor 1254 Aroclor mg/kg Dilute 1 gm of solution to 100 ml for final working test samples. QCM x 2 gm Aroclors, EPA Cluster mg/kg in Transformer Oil QCM x mg/kg in Transformer Oil QCM x mg/kg in Transformer Oil QCM x mg/kg in Transformer Oil QCM x 5 ml ULTRAcheck PCBs Aroclor µg/l Dilute 1 ml of sample to 1 L for final working test sample. QCM x 2 ml ULTRAcheck PCBs 1-2 Aroclors from the Following List: Aroclor 1016 Aroclor 1248 Aroclor 1221 Aroclor 1254 Aroclor 1232 Aroclor 1260 Aroclor µg/l each analyte Dilute 1 ml of sample to 1 L for final QCM x 2 ml ULTRAcheck PCBs in Water 1 Aroclor from the Following List: Aroclor 1016/1242 Aroclor 1232 Aroclor 1248 Aroclor 1254 Aroclor µg/l Dilute 1 ml of solution to 1 L for final working test samples. QCM x 2 ml ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL ULTRAcheck Blind QC Samples for the EPA Cluster Rule ULTRAcheck Methanol Sample methanol mg/l Ready-to-use, whole volume sample. QCM x 5 ml ULTRAcheck HAP Sample 4 Analytes methanol mg/l acetaldehyde mg/l propionaldehyde (propanal) mg/l 2-butanone (MEK) mg/l Ready-to-use, whole volume sample. QCM x 5 ml solutions@ultrasci.com VISIT 65

66 BUFFERS & REAGENTS BUFFERS & REAGENTS The reliability of your wet chemistry analytical data is directly dependent upon the quality of your buffers and reagents. ULTRA Scientific offers a complete selection of certified conductivity solutions manufactured to provide reliable solutions for virtually any electrochemical analysis. ULTRA Scientific offers the ph buffers most widely used in laboratories today. These popular buffers are available as color-coded formulations for easy identification by laboratory personnel and the labels contain expiration dates and lot numbers. ULTRA Scientific ph buffers are carefully manufactured to provide chemists with a means of keeping ph at a nearly constant value in a wide variety of chemical applications. Conductivity solutions and ph buffers are NIST SRM traceable. TABLE OF CONTENTS Certified ph Buffers...67 Certified Conductivity Solutions...68 Certified Water...68 Certified High Purity Solvents...69 Certified Titrants and Test Solutions TOLL FREE CALL FAX

67 ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL CERTIFIED PH BUFFERS Product Description ISO Guide 34 Unit Catalog # 500 ml IBF-020 ph 2.00 ph Buffer 2.00 Reference Standard 1 L IBF-020-L 4 L IBF-020-4L 20 L IBF L 500 ml IBF L IBF-040-L ph 4.01 ph Buffer 4.01 Reference Standard (Color Coded Red) 4 L IBF-040-4L 5L Spigot IBF-040-5L 20 L IBF-040A-20L 1L IBF-040-L ph 4.00 Acetate Buffer 4 L IBF-040A-4L 6X1L IBF-040A-CS 20 L IBF-040A-20L BUFFERS & REAGENTS continued on next page ph 7.00 ph Buffer 7.00 Reference Standard (Color Coded Yellow) 500 ml IBF L IBF-070-L 4 L IBF-070-4L 5L Spigot IBF-070-5L 20 L IBF L 500 ml IBF-074 ph ph Buffer Reference Standard 1 L IBF-074-L 5 L IBF-074-5L ph 8.00 ph Buffer Reference Standard (250C) 20 L IBF L 500 ml IBF-092 ph 9.21 ph Buffer Reference Standard 1 L IBF-092-L 5 L IBF-092-5L 500 ml IBF-100 ph ph Buffer Reference Standard (Color Coded Blue) 1 L IBF-100-L 4 L IBF-100-4L 20 L IBF L 500 ml IBF-120 ph ph Buffer Reference Standard 1 L IBF-120-L 4 L IBF-120-4L 20 L IBF L solutions@ultrasci.com VISIT 67

68 BUFFERS & REAGENTS ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL CERTIFIED CONDUCTIVITY SOLUTIONS Product Description Unit Catalog # Conductivity, TDS as NaCl C, 23.6 PPM 500 ml IBF L IBF-500-L Conductivity, TDS as NaCl C, 47.2 PPM 500 ml IBF L IBF-501-L Conductivity, TDS as NaCl Conductivity, TDS as NaCl Conductivity, TDS as NaCl Conductivity, TDS as NaCl Conductivity, TDS as NaCl Conductivity, TDS as NaCl Conductivity Standard, KCl Conductivity Standard, KCl Conductivity Standard, KCl C, 95.0 PPM C, 240 PPM 1, C, 495 PPM 2, C, 1000 PPM 5, C, 2620 PPM 10, C, 5400 PPM C, mol/ L KCl C, 0.01 mol/ L KCl C, 0.1 mol/ L KCl 500 ml IBF L IBF-502-L 500 ml IBF L IBF-505-L 500 ml IBF L IBF-510-L 500 ml IBF L IBF-520-L 500 ml IBF L IBF-550-L 500 ml IBF L IBF-600-L 500 ml IBF L IBF-560-L 500 ml IBF L IBF-570-L 500 ml IBF L IBF-580-L ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL CERTIFIED PURE WATER Product Description Unit Catalog # 250 ml IQC-100 ULTRA Low TOC Water < 50 ppb TOC 500 ml IQC L IQC-100-L 68 TOLL FREE CALL FAX

69 ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL CERTIFIED HIGH PURITY SOLVENTS For additional solvents, custom blends or bulk pricing and delivery options, please call sales: Product Description Unit Catalog # Acetone GC Grade, % 4 x 4 L Case SLV-0015G Acetone HPLC/Spectro Grade, % 4 x 4 L Case SLV-0015H Acetonitrile HPLC/Spectro Grade, % 4 x 4 L Case SLV-0016H BUFFERS & REAGENTS Methanol HPLC/Spectro Grade, % 4 x 4 L Case SLV-0364H Methylene Chloride (dichloromethane) GC Grade, % 4 x 4 L Case SLV-0196G n-hexane GC Grade, 95+ % 4 x 4 L Case SLV-0650G ISO GUIDE 34 CERTIFIED REFER ENCE MATERIAL CERTIFIED TITRANTS AND TEST SOLUTIONS Product Description Unit Catalog # Ammonium Hydroxide Boric Acid Boric Acid Calcium Chloride Disodium EDTA Ferric Chloride Methyl Orange Sodium Hydroxide Reagent, ACS, Ammonia Water 2% (w/v), without indicator 2% (w/v), with methyl red-methylene, ph indicator 2.75% (w/v), aqueous solution, APHA for BOD M, titrant, standardized 0.025% (w/v), aqueous solution, APHA for BOD 0.1% (w/v), aqueous solution, indicator, ASTM D N, standardized 500 ml INR-0710S 1 L INR-0710S-L 500 ml INR-0129S 1 L INR-0129S-L 500 ml INR-0129SX 1 L INR-0129SX-L 500 ml INR-2017S 1 L INR-2017S-L 500 ml ITR L ITR-011-L 500 ml INR-2617S 1 L INR-2617S-L 500 ml IND L IND-110-L 500 ml ITR L ITR-021-L Sodium Hydroxide 1.00 N, standardized, N/1 Sodium Hydroxide N, standardized, N/ ml ITR L ITR-022-L 500 ml ITR L ITR-024-L solutions@ultrasci.com VISIT 69

70

71

72 EACH CUSTOMER TOTAL SUPPORT COMPLETE SATISFACTION 2014 ULTRA Scientific, Inc. 250 SMITH STREET N. KINGSTOWN, RHODE ISLAND USA CATALOG #29