Copper & Copper Alloys CuZn38Pb2 (OF 2361)

Transcription

1 Copper and Copper Alloys Heiligenstraße Viersen Phone FAX Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014

2 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min Rem max * ,2 incl.* Applications CuZn38Pb2 combines good cold workability with good machinability. Due to a combination of these properties CuZn38Pb2 is highly suitable for all manner of industrial applications, e.g. mechanical apparatus, parts for precision engineering and optical devices. Examples of application: Tubes and bars for application in optical devices Parts for mechanical apparatus Parts of mechanical clocks Parts for fringing, riveting and cold forming At room temperature Physical properties Density 8.4 g/cm 3 Electrical conductivity 13.9 MS/m 24.0 % I.A.C.S Heat conductivity 109 W/(m*K) Heat capacity 377 J/(kg*K) Coefficient of thermal expansion /K Young s modulus 102 GPa Melting range C The microstructures of CuZn38Pb2 provide a mixture of α- and β-phase. Pb is insoluble in the brass matrix and forms fine precipitates improving the machinability of the alloy. Microstructures Heiligenstraße Viersen Phone FAX duelken@otto-fuchs.com Page 2 of 5 no responsibility is taken for the correctness of this information 04/2014

3 Consignment and measurements Strength conditions Spec./ DIN EN 12164/12165/ 12167// 12420/12449 Condition Yield strength R p0.2 [MPa] Tensile strength R m [MPa] Elongation A [%] Brinell- Hardness HB 2.5/62.5 M ** ** ** ** R / R / / / R / / R / R / H070 / / / / / / H075 ( 110) ( 340) ( 20) ( 120) ( 360) ( 20) 80 H / / / H100 / / / H105 / / / H120 / / / H135 / / / 130 DIN EN 12164: Bars for machining DIN EN 12165: Pre-material for forgings DIN EN 12167: Profiles, rectangular bars DIN EN : Hollow bars for machining DIN EN 12420: Forgings DIN EN 12449: Seamless tubes ** Condition M = without specified mechanical properties-as manufactured ( ) The numbers are not requirements of the standard - they are for information only / No requirements in standard or not applicable Specified dimensions for bars, pre-material for forging and forgings R/V Round/Polyhedral bar VS-R/V Pre-material for forging round/polygonal RS Rectangular bar Page 3 of 5 no responsibility is taken for the correctness of this information 04/2014

4 Profiles and rectangular bars can be delivered up to 180 mm in extruded and up to 130 mm in cold drawn condition. Pre-material for forging and forgings is dependent upon each individual case. Specified dimensions for hollow bars and round tubes Further dimensions for hollow bars and round tubes are available on request. Other consignments Rods and tubes in other strength and hardness conditions, and dimensions are available on request. Processing Shaping Machinability (90) (CuZn39Pb3=100%) Cold working Hot working Hot working temperature C Connecting Resistance welding Shielded welding Brazing Soldering poor Soft annealing Stress relieving Heat treatment C C Special notes and remarks There is a risk of stress corrosion cracking (SCC) in case of concurrent presence of mechanical stress and corrosive media (in particular ammoniac atmosphere). Surface treatment Mechanical polishing Electrolytic polishing Galvanisation Tin coating poor Page 4 of 5 no responsibility is taken for the correctness of this information 04/2014

5 Page 5 of 5 no responsibility is taken for the correctness of this information 04/2014