MATERIAL SAFETY DATA SHEET

Size: px
Start display at page:

Download "MATERIAL SAFETY DATA SHEET"

Transcription

1 MATERIAL SAFETY DATA SHEET TROLLEY EXPRESS Date-Issued: 10/02/2002 MSDS Ref. No: LUB100 Date-Revised: 03/16/2005 Revision No: 6 1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: TROLLEY EXPRESS PRODUCT DESCRIPTION: Lubricant PRODUCT CODE: LUB100 PRODUCT FORMULATION NAME: LUB100 CHEMICAL FAMILY: Mineral Oil GENERIC NAME: Lubricant MANUFACTURER Zee Company, Inc South Creek Road Chattanooga, TN Contact: James A. Faller Product Stewardship: (423) HR. EMERGENCY TELEPHONE NUMBERS CHEMTREC (800) COMPOSITION / INFORMATION ON INGREDIENTS Chemical Name Wt.% CAS# EINECS# Petroleum Hydrocarbons < HAZARDS IDENTIFICATION EMERGENCY OVERVIEW PHYSICAL APPEARANCE: Slightly hazy liquid IMMEDIATE CONCERNS: May cause slight irritation. POTENTIAL HEALTH EFFECTS EYES: Irritation or burning of eyes SKIN: Irritation of skin is possible with extended contact. SKIN ABSORPTION: N/A INGESTION: Nausea or stomach pains INHALATION: N/A SIGNS AND SYMPTOMS OF OVEREXPOSURE EYES: Irritation and redness SKIN: Drying effect can cause irritation SKIN ABSORPTION: N/A INGESTION: Gastric pain and vomiting INHALATION: Under normal use conditions, inhalation of this product is not expected to be hazardous. ACUTE TOXICITY: Moderate eye irritation and drying of the skin CHRONIC: N/A

2 CARCINOGENICITY: NONE MUTAGENICITY: NONE REPRODUCTIVE TOXICITY REPRODUCTIVE EFFECTS: NONE TERATOGENIC EFFECTS: NONE MEDICAL CONDITIONS AGGRAVATED: NONE ROUTES OF ENTRY: None known TARGET ORGAN STATEMENT: None known 4. FIRST AID MEASURES EYES: Flush eyes with water for at least 15 minutes and get medical attention if symptoms persist. SKIN: Immediately wash skin with soap and plenty of water. Remove contaminated clothing. Get medical attention if symptoms occur. Wash clothing before reuse. INGESTION: Give 1 or 2 glasses of water and induce vomiting. Get medical advice. INHALATION: Move to fresh air. Get medical attention if irritation persists. ANTIDOTES: N/A 5. FIRE FIGHTING MEASURES FLASHPOINT AND METHOD: ~ (400 F) to (410 F)ASTM D-92 FLAMMABLE LIMITS: 1.0% to 7.0% AUTOIGNITION TEMPERATURE: ~ (750 F) FLAMMABLE CLASS: Will burn if involved in a fire. FLAME PROPAGATION OR BURNING RATE OF SOLIDS: None known EXTINGUISHING MEDIA: Use carbon dioxide, dry chemical or alcohol foam when fighting fires involving this material. HAZARDOUS COMBUSTION PRODUCTS: Thermal decomposition can release oxides of carbon. EXPLOSION HAZARDS: None known FIRE FIGHTING PROCEDURES: As in any fire, wear a self-contained breathing apparatus if needed to avoid toxic or irritating fumes. Use water spray to cool fire exposed drums. AUTOIGNITION TEMPERATURE: None known FLAMMABLE LIMIT: None known FLASHPOINT: Not yet Determined 6. ACCIDENTAL RELEASE MEASURES SMALL SPILL: Absorb spill with vermiculite or other inert material, then place in a container for chemical waste.

3 LARGE SPILL: Dike spill and vacuum or pump spilled material into proper storage container for hazardous waste disposal. 7. HANDLING AND STORAGE GENERAL PROCEDURES: Wash thoroughly after handling. STORAGE: Keep container closed when not in use. Follow label instructions. STORAGE TEMPERATURE: Not Determined LOADING TEMPERATURE: Not Determined SHELF LIFE: 1 year 8. EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE GUIDELINES: OSHA HAZARDOUS COMPONENTS (29 CFR ) EXPOSURE LIMITS Chemical Name OSHA PEL ACGIH TLV Supplier OEL ppm mg/m 3 ppm mg/m 3 ppm mg/m 3 Petroleum Hydrocarbons TWA 5 mg/m3 [1] OSHA TABLE COMMENTS: 1. (mists) 2. Mists 5 mg/m3 [2] PERSONAL PROTECTIVE EQUIPMENT EYES AND FACE: Wear eye/face protection. SKIN: Wear chemical-resistant gloves RESPIRATORY: N/A PROTECTIVE CLOTHING: N/A WORK HYGIENIC PRACTICES: After contact with skin, wash immediately with plenty of water and soap. 9. PHYSICAL AND CHEMICAL PROPERTIES PHYSICAL STATE: Liquid ODOR: Oil APPEARANCE: Clear COLOR: Straw ph: NOT APPLICABLE PERCENT VOLATILE: Not Determined VAPOR PRESSURE: Not Determined VAPOR DENSITY: > 10 (Air=1) BOILING POINT: > (210 F) FREEZING POINT: Not Determined MELTING POINT: Not Known SOLUBILITY IN WATER: Insoluble EVAPORATION RATE: < 1 (Water = 1) SPECIFIC GRAVITY: 0.87 g/ml at 25 C

4 VISCOSITY: Not Determined VISCOSITY #2: Not Determined WEIGHT PER VOLUME: 7.25 lb/gal 10. STABILITY AND REACTIVITY STABLE: YES HAZARDOUS POLYMERIZATION: NO HAZARDOUS DECOMPOSITION PRODUCTS: Oxides of carbon, acrid fumes on decomposition 11. TOXICOLOGICAL INFORMATION 12. ECOLOGICAL INFORMATION 13. DISPOSAL CONSIDERATIONS DISPOSAL METHOD: Dispose of in accordance with Federal, State and local regulations. EMPTY CONTAINER: Since emptied containers retain product residue, follow label warnings even after container is emptied. Residual vapors may explode on ignition; do not cut, drill, grind, or weld on or near this container. RCRA/EPA WASTE INFORMATION: N/A 14. TRANSPORT INFORMATION DOT (DEPARTMENT OF TRANSPORTATION) PROPER SHIPPING NAME: NON REGULATED 15. REGULATORY INFORMATION UNITED STATES SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT) 311/312 HAZARD CATEGORIES: ACUTE: YES TSCA (TOXIC SUBSTANCE CONTROL ACT) TSCA STATUS: YES RCRA STATUS: N/A 16. OTHER INFORMATION APPROVED BY: James A. Faller TITLE: Director of Operations PREPARED BY: Walter Brown INFORMATION CONTACT: James Faller REVISION SUMMARY Revision #: 6 This MSDS replaces the September 22, 2004 MSDS. Any changes in information are as follows: In Section 1 24 Hour Emergency Phone Numbers

5 HMIS RATING HEALTH: 1 FLAMMABILITY: 1 PHYSICAL HAZARD: 0 PERSONAL PROTECTION: A NFPA CODES GENERAL STATEMENTS: The information contained herein is believed to be accurate but is not warranted to be so. Users are advised to confirm in advance of need that information is current, applicable, and suited to the circumstances of use. Vendor assumes no responsibility for injury to vendee or third persons proximately caused by the material if reasonable safety procedures are not adhered to as stipulated in the data sheet. Furthermore, vendor assumes no responsibility for injury caused by abnormal use of this material even if reasonable safety procedures are followed.