Clean Speed Controller with One-touch Fitting

Transcription

1 Clean Speed Controller with One-touch Fitting Series -FPQ/-FPG Series -FPG Series -FPQ P N Speed controllers for clean room use V S R Q -FPQ: (electroless nickel plated) and -FPG: are now available as a series. 7

2 Low particulate generating speed controllers designed for use in clean rooms Body Metal body -FPQ: (electroless nickel plated) -FPG: Release button -FPQ: Light gray -FPG: Light blue Clean Speed Controller with One-touch Fitting Series -FPQ/FPG Series -FPQ (electroless nickel plated) Series -FPG Elbow type 1FP -M5 22 1FP FP FP FP -0 Port size M5 x 0. R 1/ R 1/ R 3/ R 1/2 Applicable tube O.D. (mm) Applicable cylinder bore size (mm),, 1, 20 20, 25, 32 20, 25, 32, 0 0, 50, 3 3, 0, 0 Low particulate generation Clean performance -FPQ Resin: PP Metal: (electroless nickel plated) --F Resin: PBT, POM Metal: (electroless nickel plated) --FG Resin: PBT, POM Metal: Stainless steel 303 Environmental resistance -FPG Resin: PP Metal: Excellent

3 Clean Speed Controller with One-touch Fitting Elbow Type Series -FPQ/FPG -FPQ/ (electroless nickel plated) Release button color: Light gray Model Elbow type 1FP -M5 22 1FP FP FP FP -0 Port size M5 x 0. R 1/ R 1/ R 3/ R 1/2 Applicable tubing O.D. (mm) Applicable cylinder bore size (mm),, 1, 20 20, 25, 32 20, 25, 32, 0 0, 50, 3 3, 0, 0 Specifications -FPG/ Release button color: Light blue JIS Symbol Fluid Particulate generation grade Proof pressure (20 C) Maximum operating pressure (20 C) Minimum operating pressure Ambient and fluid temperature Oil Air Grade 1 (1) 1.5 MPa (2) 1 MPa (3) 0.1 MPa 5 to 0 C (No freezing) rotations ( rotations () ) Fluorine-based grease Note 1) Refer to particulate generation grade classifications. Note 2) Proof pressure is 1.5 times higher than maximum operating pressure. Note 3) The value of the maximum operating preasure is at a temperature of 20 C. In other cases, refer to Relationship between Operating Temperature and Max. Operating Pressure below. Note ) For 1FP Flow Rate and Effective Area Model 1FP -M5 22 1FP FP FP FP -0 ø ø ø ø ø ø ø ø ø ø ø Tubing O.D. Metric sizes ø ø ø ø Controlled Flow rate l/min (ANR) (free) flow Effective area mm Note) Flow rate values are at a pressure of 0.5MPa, and temperature of 20 C. Recommended Applicable Tubing Tubing material Clean series polyurethane tubing: Series Tubing O.D. ø, ø, ø, ø, ø Polyurethane tubing: Series TU, Nylon tubing: Series T and Soft nylon tubing: Series TS can also be used. However, the degree of clean performance will decline. Particulate Generation Grade Classifications Relation between Operating Temp. and Max. Operating Pressure P N V S R Q Flow Direction Symbols on Body Meter-out type Meter-in type JIS Symbol Symbol Average particle concentration Particles/ft 3 Grade 3 2 Grade 3 1 Grade Grade Particle size μm or less 1 Max. operating pressure MPa Operating temperature C Note) Refer to back page for details. 9

4 Series -FPQ/FPG How to Order F P Q Body size M5 standard 1/, 1/ standard 3/ standard 1/2 standard 0 1 Elbow Control type Meter-out Meter-in With One-touch fitting Clean specifications Port size M5 M5 x R 1/ 02 R 1/ 03 R 3/ 0 R 1/2 Applicable tubing O.D. Metric sizes ø ø ø ø ø Q G Metal parts material (electoless nickel plated) Needle Valve/Flow Characteristics 1FP -M5 22 1FP FP -02 0,0 0 0, FP -03, FP -0 90

5 Clean Speed Controller with One-touch Fitting Elbow Type Series -FPQ/FPG Construction Meter-out type M5 type Meter-in type M5 type P N V S Component Parts No. Description 1 Body A 2 Knob 3 Body B Needle 5 Needle guide Seat ring 7 Lock nut U seal 9 Cassette Material H 1FPQ, Note parts are electroless nickel plated Material H 1FPG Note R Q Seal Stopper Cushion O-ring O-ring Gasket,, 91

6 Series -FPQ/FPG Dimensions Applicable tubing O.D. ød H (Hexagon width across flats) M5 type ød2 M1 L1 L2 T Applicable tubing O.D. ød H (Hexagon width across flats) L3 L A ød1 L3 L A ød1 ød2 M1 L1 L2 T Model 1FP -M5-0 1FP -M FP FP FP FP FP FP FP FP FP FP FP FP FP -0- Tubing O.D. d Mass (g) T H D1 D2 L1 L2 L3 () L (1) () A (2) M1 (3) Max. Min. Max. Min. 1 2 M5 x 0. R 1/ R 1/ R 3/ R 1/ (.2) 13. (1.3).7 (1.2) 1.3 (1.) 19. (20.9) 2.5 (25.) 2. (2.) 35.5 (3.) 0.3 (0.) 5. (.9) 57.2 (5.1) 2 (2) 30.5 (31.) 35.3 (35.) 0. (1.9) 9.7 (50.) Note 1) Reference dimensions Note 2) Reference dimension for threads after installation Note 3) 1 is the weight for type 2 1FPQ (brass + electroless nickel plated), 2 is the weight for type 2 1FPG (). Note ) Dimensions of 2 1FPQ, ( ): 2 1FPG

7 Series -FPQ/FPG Specific Product Precautions Be sure to read before handling. Refer to front matters 5 and 59 for Safety Instructions and pages to 1 for Flow Control Equipment Precautions. Handling Caution 1. Store away from direct sunlight at 0 C or less. 2. Open the inner package of the double packaging in a clean room or other clean environment. Piping Caution 1. Be sure to use sealant tape or liquid gasket at the taper thread part. Using without sealant tape or liquid gasket can cause air leakage. P N V S R Q 93