Cutting and Grinding Discs

Transcription

1 Cutting and Grinding Discs 168 echnical Information 169 Structure and Components 170 Safety 171 Labelling Grinding discs line marking he product lines are illustrated by star symbols at the top of the table; please refer to page 14 and

2 Cutting and Grinding Discs echnical Information Durability Resin bonded grinding and cutting wheels for free-hand application must be used within three years of manufacture. Please see metal ring for the expiry date which is specified by month and year; for instance V07/2018. Labelling system for resin bonded grinding wheels Example: Abrasive Grit size A 30/36 V BF ardness Bond Abrasive ype Grit ardness Grade Bond coarse medium fi n e soft medium hard A aluminium oxide M R U BA resin bond C silicon carbide up to up to bis Q S V BF resin bond, fibre-reinforced Z zirconia alumina P Z Working speed LUKAS grinding discs are developed and tested for specific maximum working speeds and grinding processes. Prior to mounting the grinding tool on the machine, it must be ensured that the machine s nominal speed (as specified on nameplate) does not exceed the maximum operating speed indicated on the grinding wheel or disc. Maximum operating speed Diameter of Disc [] /RPM [min-1] m/s m/s

3 Cutting and Grinding Discs Structure and Components Metal ring with expiry date (see page 168) Label (see page 171) Strong fibre glass reinforcement for additional safety and lateral stability Active fillers for better cutting performance Bonding matrix = fillers + phenolic resins Bonded abrasive Mixture with high-quality grains Abrasive Abrasive Semi-friable aluminium oxide Zirconia aluminia Vitrified coated roasted aluminium oxide Ceramic grain 169

4 Cutting and Grinding Discs Safety With regards to occupational safety and operational convenience, LUKAS responsibility to the customer is taken very seriously. Our products are designed, manufactured and produced in accordance with the most stringent quality standards to provide a maximum of customer value at minimum risk. We are a member of both, the German Abrasive Association (VDS) and the Organisation for the Safety of Abrasives (osa) and thus actively contribute to users health and safety. Applied standards: Safety Requirements for Bonded Abrasives s: EN12413 Safety Requirements for Diamond Blades: EN13236 Safety recoendations Don t handle wheels roughly. Don t use non-reinforced cut-off wheels on portable machines. Don t store wheels in a damp atmosphere or in extreme temperatures. Don t mount a damaged wheel. Don t ever exceed the maximum operating speed marked on the wheel. Don t force a wheel onto a machine spindle. Don t use mounting flanges which are incorrect, damaged, dirty or burred. Don t tighten the mounting nut or locking flange excessively. o do so can distort the flanges and discs. Don t use a machine without a wheel guard. Don t use wheels without proper ventilation or dust protection equipment. Don t apply side pressure to cut-off wheels. You should not bend the wheel. Don t stop the wheel by applying pressure to the periphery or face. Always switch the machine off and allow the wheel to stop revolving. Don t allow the wheel to be trapped or pinched in the cut. Don t apply excessive pressure onto the wheel so that the driving motor slows down. Don t drop or lower a portable machine by the cable or airline onto the floor. A wheel can be easily cracked, if it is put down hard, by the weight of the machine. his is a coon cause of wheel breakage. Don t grind with a depressed centre grinding wheel at an angle below 30 degrees to the work piece. Don t use a machine in a position where you do not have full control of the machine and you are not well balanced. Clamping System he use of flanges with unequal diameters is not allowed. Both flanges between which the bonded abrasive is mounted must have the same outer diameter and similar contact areas (according to EN :2007 and ANSI B.7.1). correct incorrect 170

5 Cutting and Grinding Discs Labelling Safety standard Quality igh Performance Industry Base Manufactured according to EN EAN Code Safety recoendations Application max. operating speed max. rpm Application instructions A = Aluminium oxide C = Silicon carbide AC = Aluminium oxide / Silicon carbide ZA = zirconia alumina / aluminium oxide 60 = Grit size (16/very coarse, 36/medium, 60/Fine) B = resin bond F = fibre-reinforced D 125 x 1,0 x 22,23 = D x U x 5 x 0,04 x 7/8 = D x U x Diameter x thickness x bore size U ypes of resin-bonded grinding wheels D D D U = (0,8 4,5 ) (USA: yp 1) U = (0,8 4,5 ) (USA: yp 27) Grinding discs U = (3 10 ) (USA: yp 27) 41 Straight cutting discs 42 Depressed centre cutting discs 27 Depressed centre grinding discs Available in diameters from 50 (2 ) to 230 (9 ) for freehand applications from 300 (12 ) to 500 (20 ) for use in stationary machines Available in diameters from 76 (3 ) to 230 (9 ), allowed for freehand use. Available in diameters from 76 (3 ) to 230 (9 ), allowed for freehand use. 171

6 172

7 174 Qualities and areas of application 176 Free-hand cutting disc for angle grinders 183 Large cutting disc (greater than 230 ) line marking he product lines are illustrated by star symbols at the top of the table; please refer to page 14 and

8 Qualities and areas of application ype line Material Inox/Steel Steel Aluminium Stone/ Cast material Cast material Free-hand cutting disc for angle grinders ( ) Page Page 180 Page 178 Page 181 Page Page Large cutting disc (greater than 230 ) Page

9 Progress optimum cutting performance and service life low odour and dust levels durable stable with regard to quality optimised for top performance maximum service life and cutting performance due to innovative bonding technology high cutting speed at low cutting temperature low odour and dust levels during daily usage ergonomic work position and maximum durability without use of excessive force maximum shelf life with high levels of stability with regard to quality thanks to top quality raw materials energy optimised for your high performance angle grinders environmentally friendly manufacturing process, made in Germany using up-to-date production processes and optimised formulations perfect for a wide variety of Inox and steel materials precise cutting 175

10 for stainless steel PROGRESS Ordering example: A007226V = flat 42 = depressed centre Iron, sulphur and chlorine free Recoended for A007226V x1,0 A60Z-BF Inox 100 1,0 16, A B C D e f G 0 50 A007231V x1,0 A60Z-BF Inox 115 1,0 22, A B C D e f G 0 50 A007235V x1,6 A46Z-BF Inox 115 1,6 22, A B C D e f G 0 50 A007211V x2,5 A30Z-BF Inox 115 2,5 22, A B C D e f G 0 25 A007233V x1,0 A60Z-BF Inox 125 1,0 22, A B C D e f G 0 50 A007237V x1,6 A46Z-BF Inox 125 1,6 22, A B C D e f G 0 50 A007213V x2,5 A30Z-BF Inox 125 2,5 22, A B C D e f G 0 25 A007239V x1,2 A60Z-BF Inox 150 1,2 22, A B C D e f G 0 50 A007241V x1,6 A46Z-BF Inox 150 1,6 22, A B C D e f G 0 25 A007243V x1,6 A46Z-BF Inox 180 1,6 22, A B C D e f G 0 25 A007245V x2,0 A46Z-BF Inox 230 2,0 22, A B C D e f G 0 25 A007219V x2,5 A30Z-BF Inox 230 2,5 22, A B C D e f G 0 25 A005301V x0,8 A60Z-BF Inox 115 0,8 22, A B C D e f G 0 50 A007212V x2,5 A30Z-BF Inox 115 2,5 22, A B C D e f G 0 25 A005302V x0,8 A60Z-BF Inox 125 0,8 22, A B C D e f G 0 50 A007214V x2,5 A30Z-BF Inox 125 2,5 22, A B C D e f G 0 25 A007244V x1,6 A46Z-BF Inox 180 1,6 22, A B C D e f G 0 25 A007220V x2,5 A30Z-BF Inox 230 2,5 22, A B C D e f G

11 Cutting disc set PROGRESS Ordering example: A007231V = flat Iron, sulphur and chlorine free Recoended for A007231V x1,0 A60Z-BF Inox 115 1,0 22, A B C D e f G 0 10 A007233V x1,0 A60Z-BF Inox 125 1,0 22, A B C D e f G 0 10 andy take-away pack for construction sites in safety packaging moisture proof Inox/Steel Steel Aluminium Stone Cast material Plastic itanium 177

12 for stainless steel PROMAX Ordering example: A001657V = flat 42 = depressed centre Iron, sulphur and chlorine free Recoended for A005841V x1,0 A60X-BF Inox 115 1,0 22, A B C D e f G 0 50 A003346V x1,6 A46X-BF Inox 115 1,6 22, A B C D e f G 0 50 A001657V x2,0 A36U-BF Inox 115 2,0 22, A B C D e f G 0 25 A005842V x1,0 A60X-BF Inox 125 1,0 22, A B C D e f G 0 50 A003348V x1,6 A46X-BF Inox 125 1,6 22, A B C D e f G 0 50 A001687V x2,0 A36U-BF Inox 125 2,0 22, A B C D e f G 0 25 A003327V x1,6 A46X-BF Inox 150 1,6 22, A B C D e f G 0 25 A001743V x2,0 A36U-BF Inox 180 2,0 22, A B C D e f G 0 25 A005864V x1,9 A46X-BF Inox 230 1,9 22, A B C D e f G 0 25 A001782V x2,0 A36U-BF Inox 230 2,0 22, A B C D e f G 0 25 A001696V x2,5 A30U-BF Inox 125 2,5 22, A B C D e f G 0 25 A005571V x1,6 A46X-BF Inox 180 1,6 22, A B C D e f G 0 25 A005877V x1,9 A46X-BF Inox 230 1,9 22, A B C D e f G 0 25 A004464V x3,0 A30U-BF Inox 230 3,0 22, A B C D e f G 0 25 Cutting disc set PROMAX Ordering example: A005841V = flat Iron, sulphur and chlorine free Recoended for A005841V x1,0 A60X-BF Inox 115 1,0 22, A B C D e f G 0 10 A005842V x1,0 A60X-BF Inox 125 1,0 22, A B C D e f G 0 10 andy take-away pack for construction sites in safety packaging moisture proof 178

13 for stainless steel PREMIUMFLEX Ordering example: A000647V = flat 42 = depressed centre Iron, sulphur and chlorine free Recoended for A003108V x1,0 A60S-BF Inox 100 1,0 16, A B C D e f G 0 50 A004643V x1,0 A60S-BF Inox 115 1,0 22, A B C D e f G 0 50 A000647V x1,6 A46-BF Inox 115 1,6 22, A B C D e f G 0 50 A002672V x1,0 A60S-BF Inox 125 1,0 22, A B C D e f G 0 50 A000674V x1,6 A46-BF Inox 125 1,6 22, A B C D e f G 0 50 A000700V x1,6 A46-BF Inox 150 1,6 22, A B C D e f G 0 25 A000716V x1,6 A46-BF Inox 180 1,6 22, A B C D e f G 0 25 A000742V x1,9 A46-BF Inox 230 1,9 22, A B C D e f G 0 25 A003568V x3,0 A24/30S-BF Inox 230 3,0 22, A B C D e f G 0 25 A001442V x2,5 A24/30S-BF Inox 115 2,5 22, A B C D e f G 0 25 A004157V x2,5 A24/30S-BF Inox 125 2,5 22, A B C D e f G 0 25 A000718V x1,6 A46-BF Inox 180 1,6 22, A B C D e f G 0 25 A000744V x1,9 A46-BF Inox 230 1,9 22, A B C D e f G 0 25 A005451V x2,5 A24/30S-BF Inox 230 2,5 22, A B C D e f G 0 25 A004168V x3,0 A24/30S-BF Inox 230 3,0 22, A B C D e f G 0 25 Inox/Steel Steel Aluminium Stone Cast material Plastic itanium 179

14 Cutting disc set PREMIUMFLEX Bestell-Bespiel: A002672V = flat Iron, sulphur and chlorine free Recoended for A004643V x1,0 A60S-BF Inox 115 1,0 22, A B C D e f G 0 10 A002672V x1,0 A60S-BF Inox 125 1,0 22, A B C D e f G 0 10 andy take-away pack for construction sites in safety packaging moisture proof for steel PROGRESS Ordering example: A007271V = flat 42 = depressed centre Recoended for A007276V x1,0 A60Z-BF Steel 115 1,0 22, A B C e 0 50 A007271V x1,6 A46Z-BF Steel 115 1,6 22, A B C e 0 50 A007278V x1,0 A60Z-BF Steel 125 1,0 22, A B C e 0 50 A007273V x1,6 A46Z-BF Steel 125 1,6 22, A B C e 0 50 A007284V x1,9 A46Z-BF Steel 230 1,9 22, A B C e

15 for steel PROMAX Ordering example: A001656V = flat 42 = depressed centre Recoended for A005840V x1,0 A60X-BF Steel 115 1,0 22, A B C e 0 50 A013301V x1,6 A46X-BF Steel 115 1,6 22, A B C e 0 50 A001656V x2,0 A36U-BF Steel 115 2,0 22, A B C e 0 25 A005835V x1,0 A60X-BF Steel 125 1,0 22, A B C e 0 50 A013302V x1,6 A46X-BF Steel 125 1,6 22, A B C e 0 50 A001686V x2,0 A36U-BF Steel 125 2,0 22, A B C e 0 25 A011086V x2,5 A30X-BF Steel 125 2,5 22, A B C e 0 25 A013303V x1,6 A46X-BF Steel 150 1,6 22, A B C e 0 25 A013305V x1,6 A46X-BF Steel 180 1,6 22, A B C e 0 25 A001742V x2,0 A36U-BF Steel 180 2,0 22, A B C e 0 25 A005867V x1,9 A46X-BF Steel 230 1,9 22, A B C e 0 25 A001781V x2,0 A36U-BF Steel 230 2,0 22, A B C e 0 25 A001785V x3,0 A30U-BF Steel 230 3,0 22, A B C e 0 25 A001665V x2,5 A30U-BF Steel 115 2,5 22, A B C e 0 25 A001695V x2,5 A30U-BF Steel 125 2,5 22, A B C e 0 25 A001724V x2,5 A30U-BF Steel 150 2,5 22, A B C e 0 25 A001750V x3,0 A30U-BF Steel 180 3,0 22, A B C e 0 25 A001790V x2,5 A30U-BF Steel 230 2,5 22, A B C e 0 25 Inox/Steel Steel Aluminium Stone Cast material Plastic itanium 181

16 for steel PREMIUMFLEX Ordering example: A000638V = flat 42 = depressed centre Recoended for A006440V x1,0 A60S-BF Steel 115 1,0 22, A B C e 0 50 A000648V x1,6 A46-BF Steel 115 1,6 22, A B C e 0 50 A000656V x2,5 A24R-BF Steel 115 2,5 22, A B C e 0 25 A006710V x1,0 A60S-BF Steel 125 1,0 22, A B C e 0 50 A000675V x1,6 A46-BF Steel 125 1,6 22, A B C e 0 50 A000679V x2,5 A24R-BF Steel 125 2,5 22, A B C e 0 25 A000707V x2,5 A24R-BF Steel 150 2,5 22, A B C e 0 25 A000717V x1,6 A46-BF Steel 180 1,6 22, A B C e 0 25 A000728V x3,0 A24R-BF Steel 180 3,0 22, A B C e 0 25 A000743V x1,9 A46-BF Steel 230 1,9 22, A B C e 0 25 A000967V x2,0 A36-BF Steel 230 2,0 22, A B C e 0 25 A000750V x3,0 A24R-BF Steel 230 3,0 22, A B C e 0 25 A000638V x2,5 A24R-BF Steel 100 2, A B C e 0 25 A000662V x2,5 A24R-BF Steel 115 2,5 22, A B C e 0 25 A000688V x2,5 A24R-BF Steel 125 2,5 22, A B C e 0 25 A000732V x3,0 A24R-BF Steel 180 3,0 22, A B C e 0 25 A000745V x1,9 A46-BF Steel 230 1,9 22, A B C e 0 25 A000754V x3,0 A24R-BF Steel 230 3,0 22, A B C e

17 Stationary cutting discs for stainless steel PREMIUMFLEX Ordering example: A = flat Iron, sulphur and chlorine free Recoended for A x3,5 A30S-BF Inox 300 3,5 32, A B C D e f G 0 10 A x2,6 A30S-BF Inox 350 2,6 25, A B C D e f G 0 10 for steel PREMIUMFLEX Ordering example: A = flat v max. : 100 m/s Recoended for A x4,0 A24R-BF 300 4,0 20, A B C e 0 10 A x4,0 A24R-BF 350 4,0 20, A B C e 0 10 A x4,0 A24R-BF 350 4,0 25, A B C e 0 10 Inox/Steel Steel Aluminium Stone Cast material Plastic itanium 183

18 Stationary cutting discs for steel PREMIUMFLEX Ordering example: A = flat bzw. 100 m/s Recoended for A x2,6 A36S-BF Steel 300 2,6 25, / 80 m/s A B C e 0 10 A x3,5 A30-BF Steel 300 3,5 22, / 100 m/s A B C e 0 10 A x3,5 A30-BF Steel 300 3,5 25, / 100 m/s A B C e 0 10 A x3,5 A30-BF Steel 300 3,5 32, / 100 m/s A B C e 0 10 A x2,6 A36S-BF Steel 350 2,6 25, / 80 m/s A B C e 0 10 A x3,5 A30-BF Steel 350 3,5 25, / 100 m/s A B C e 0 10 A x3,5 A30-BF Steel 350 3,5 32, / 100 m/s A B C e 0 10 A x3,2 A36S-BF Steel 400 3,2 25, / 80 m/s A B C e 0 5 A x4,0 A30-BF Steel 400 4,0 32, / 100 m/s A B C e

19 Grinding discs 186 Qualities and areas of application 188 Free-hand grinding discs for angle grinders line marking he product lines are illustrated by star symbols at the top of the table; please refer to page 14 and

20 Qualities and areas of application Grinding discs ype line Material INOX/Steel Steel Aluminium Stone/ Cast material Cast material Free-hand grinding discs for angle grinders Page 188 Page 190 Page 189 Page 190 Page 192 Page 191 Page 189 Page 191 Page 193 Page

21 Grinding discs Progress optimum cutting performance and service life low odour and dust levels durable stable with regard to quality optimised for top performance maximum service life and cutting performance due to innovative bonding technology high cutting speed at low cutting temperature low odour and dust levels during daily usage ergonomic work position and maximum durability without use of excessive force maximum shelf life with high levels of stability with regard to quality thanks to top quality raw materials energy optimised for your high performance angle grinders environmentally friendly manufacturing process, made in Germany using up-to-date production processes and optimised formulations perfect for a wide variety of inox and steel materials precise cutting 187

22 Grinding discs 2-in-1 Cutting and grinding without tool change. Safe. Precise. Perfect. Grinding and cutting discs to machine stainless steel PROGRESS COOL JOBBER 2-in-1 Ordering example: AS015675V = depressed centre Iron, sulphur and chlorine free Recoended for AS015675V x2,0 A36V-BF Inox COOL JOBBER 115 2,0 22, A B C D F 0 25 AS015676V x2,0 A36V-BF Inox COOL JOBBER 125 2,0 22, A B C D F 0 25 Grinding discs to machine stainless steel PROGRESS Ordering example: AS013491V = depressed centre Iron, sulphur and chlorine free Recoended for AS013491V x7,0 A24U-BF Inox 115 7,0 22, A B C D F 0 10 AS013492V x7,0 A24U-BF Inox 125 7,0 22, A B C D F 0 10 AS013496V x7,0 A24U-BF Inox 230 7,0 22, A B C D F

23 Grinding discs Grinding discs for stainless steel PROMAX Ordering example: AS003100V = depressed centre Iron, sulphur and chlorine free Recoended for AS003100V x6,0 A24X-BF Inox 115 6,0 22, A B C D F 0 10 AS003101V x6,0 A24X-BF Inox 125 6,0 22, A B C D F 0 10 AS003103V x6,0 A24X-BF Inox 180 6,0 22, A B C D F 0 10 AS003104V x6,0 A24X-BF Inox 230 6,0 22, A B C D F 0 10 Grinding discs for stainless steel PREMIUMFLEX Ordering example: AS000105V = depressed centre Iron, sulphur and chlorine free Recoended for AS002037V x6,0 A24/30S-BF Inox 100 6,0 16, A B C D 0 10 AS000105V x6,0 A24/30S-BF Inox 115 6,0 22, A B C D 0 10 AS000106V x6,0 A24/30S-BF Inox 125 6,0 22, A B C D 0 10 AS000107V x6,0 A24/30S-BF Inox 150 6,0 22, A B C D 0 10 AS000108V x6,0 A24/30S-BF Inox 180 6,0 22, A B C D 0 10 AS000109V x6,0 A24/30S-BF Inox 230 6,0 22, A B C D 0 10 Inox/Steel Steel Aluminium Stone Cast material Plastic itanium 189

24 Grinding discs Grinding discs for steel PROGRESS Ordering example: AS012451V = depressed centre Recoended for AS012451V x7,0 A24X-BF Steel 115 7,0 22, A B C 0 10 AS012453V x7,0 A24X-BF Steel 125 7,0 22, A B C 0 10 AS012458V x7,0 A24X-BF Steel 150 7,0 22, A B C 0 10 AS012466V x7,0 A24X-BF Steel 180 7,0 22, A B C 0 10 AS012468V x7,0 A24X-BF Steel 230 7,0 22, A B C 0 10 Grinding discs for steel PROMAX Ordering example: AS001679V = depressed centre Recoended for AS001679V x6,0 A24/30-BF Steel 115 6,0 22, A B C e 0 10 AS001710V x6,0 A24/30-BF Steel 125 6,0 22, A B C e 0 10 AS001811V x6,0 A24/30-BF Steel 230 6,0 22, A B C e

25 Grinding discs Grinding discs for steel PREMIUMFLEX Ordering example: AS000667V = depressed centre Recoended for AS000667V x6,0 A24/30S-BF Steel 115 6,0 22, A B C 0 10 AS000690V x4,0 A24/30S-BF Steel 125 4,0 22, A B C 0 10 AS000692V x6,0 A24/30S-BF Steel 125 6,0 22, A B C 0 10 AS000712V x6,0 A24/30S-BF Steel 150 6,0 22, A B C 0 10 AS000737V x7,0 A24/30S-BF Steel 180 7,0 22, A B C 0 10 AS000762V x6,0 A24/30S-BF Steel 230 6,0 22, A B C 0 10 Grinding discs for cast iron PROMAX Ordering example: AS001711V = depressed centre Recoended for AS001711V x6,0 ZA24R-BF Cast 125 6,0 22, A B C E 0 10 AS001773V x6,0 ZA24R-BF Cast 180 6,0 22, A B C E 0 10 AS001812V x6,0 ZA24R-BF Cast 230 6,0 22, A B C E 0 10 Inox/Steel Steel Aluminium Stone Cast material Plastic itanium 191

26 Grinding discs Grinding discs for cast iron PREMIUMFLEX Ordering example: AS000867V = depressed centre Recoended for AS000867V x8,0 AC24P-BF Cast 180 8,0 22, E 0 10 Grinding discs for stone and cast iron Promax Ordering example: AS000320V = depressed centre Recoended for AS000320V x6,0 C24R-BF Stone 180 6,0 22, E G

27 Grinding discs Grinding discs for stone and cast iron PREMIUMFLEX Ordering example: AS001600V = flat Recoended for AS001600V x6,0 AC24S-BF Stone 230 6,0 22, E J K L 0 10 Inox/Steel Steel Aluminium Stone Cast material Plastic itanium 193