Model 410 Threaded Straight Thermowell. Model 411 Threaded Tapered Thermowell. Model 412 Threaded Reduced Tip Thermowell 1.

Transcription

1 Model 410 Threaded Straight Thermowell T 3/4 NT NT Model 411 Threaded Tapered Thermowell T 3/4 NT NT Model 412 Threaded Reduced Tip Thermowell T 2.5 3/4 NT NT Note: All dimensions for bore and 1/2 NT probe connection. For other dimensions consult factory. Rev. 4 / Instrumentation ynatherm inc 1

2 Model 420 Flanged Straight Thermowell Model 421 Flanged Tapered Thermowell Model 422 Flanged Reduced Tip Thermowell Note: All dimensions for bore and 1/2 NT probe connection. For other dimensions consult factory. 2 Instrumentation ynatherm inc Rev. 4 / 12-16

3 Model 430 Van Stone Straight Thermowell ipe R R Model 431 Van Stone Tapered Thermowell ipe R R Model 432 Van Stone Reduced Tip Thermowell 2.5 ipe R R Note: All dimensions for bore and 1/2 NT probe connection. For other dimensions consult factory. Rev. 4 / Instrumentation ynatherm inc 3

4 1.1 odes se the table below to select appropriate thermowell material. onsult factory for materials not listed. ode A Stainless Steel 304 B Stainless Steel 310 Stainless Steel 316 Stainless Steel 446 E Inconel 600 ode F G H I J Monel Titanium opper Brass Hastelloy X 1.2 Options odes se the table below to select thermowell options, if several options are required, separate by comma (ex....-a,b,). ode Option ode Option A lug And hain F Oxygen leaning B Hydrostatic Test G Tantalum Sheath ye enetrant Test H X-Ray Test Full enetration Weld I oating (Specify) E Mill Test Report X Special (Specify) 1.3 Flange odes se the table below to specify flange rating and construction. Flange Face Type And Rating odes Flange Face Flange Rating 150# 300# 600# 900# 1500# Flat Face 1F 2F 3F 4F 5F Raised Face 1R 2R 3R 4R 5R Ring Type Joint 1J 2J 3J 4J 5J 4 Instrumentation ynatherm inc Rev. 4 / 12-16

5 E Threaded Thermowell rofile 0 - Straight Thermowell 1 - Tapered Thermowell 2 - Reduced Tip Thermowell 3 - Thermowell rocess onnection - 1/2 NT Male E - 3/4 NT Male F - 1 NT Male 5 - Extension Length (T) Ex. 2-1/4 = 2.25 If no extension is required use Thermowell ode Select ode In Section Immersion Length () Ex. 12-1/2 = Options odes Select Options odes In Section 3.2 If none required, enter H -1R Flanged Thermowell rofile 0 - Straight Thermowell 1 - Tapered Thermowell 2 - Reduced Tip Thermowell 2 - Thermowell ode Select ode In Section Flange Size E - 3/4 F - 1 G H I - 2 J Flange ode Select Flange Face Type And Rating ode In Section Flange ode Select ode In Section Immersion Length () Ex. 12-1/2 = Extension Length (T) Ex. 2-1/4 = 2.25 If no extension is required use Options odes Select Options odes In Section 3.2 If none required, enter 0 Rev. 4 / Instrumentation ynatherm inc 5

6 H Van Stone Thermowell rofile 0 - Straight Thermowell 1 - Tapered Thermowell 2 - Reduced Tip Thermowell 2 - Thermowell ode Select ode In Section Nominal ipe Size 4 - Immersion Length () F - 1 H Ex. 12-1/2 = I Extension Length (T) Ex. 2-1/4 = 2.25 If no extension is required use Options odes Select Options odes In Section 3.2 If none required, enter 0 Ask about our other thermowell models ; Socket Weld Ground Joint Weld-In Limited Space 6 Instrumentation ynatherm inc Rev. 4 / 12-16

7 2.1 Metal rotection Tubes 1 ode Specify protection tube material. ipe ode SST SST SST arbon Steel 4 SST Inconel Size ode Specify protection tube size. ipe Size (O) ode 1/4 (.540 ) B 3/8 (.675 ) 1/2 (.840 ) 3/4 (1.050 ) E 1 (1.315 ) F 1.25 (1.660 ) G 3 Schedule ode Specify protection tube schedule. ipe Schedule ode Hot End ode Specify hot end configuration. Hot End onfiguration Open End losed End ode O 5 Weld Bushing ode Specify weld bushing material and size. se order code 0 if not required. Size (NT Male) 1/2 3/ arbon Steel A B E F Stainless Steel H I J K L M L X ing Information E K L 4 5 X Rev. 4 / Instrumentation ynatherm inc 7

8 2.2 eramic rotection Tubes Mullite protection tubes can be used up to ue to the silica content, should be used with inner alumina protection tube when using noble metal sensing element. Low cost, generally used with base metal thermocouple elements. Alumina protection tubes can be used up to ompatible with noble and base metal thermocouple elements. Better strength and thermal shock resistance than mullite. Hexoloy protection tubes can be used up to ompatible with noble and base metal thermocouple elements. Exceptional wear resistance (50% harder than tungsten carbide) and thermal conductivity (5 X that of alumina). Model 460 eramic Tube 1 eramic Tube And Size ode Specify protection tube material and size. 2 Hot End ode Specify hot end configuration. Tube Tube Size (O X I) 3/8 X 1/4 11/16 X 7/16 3/4 X 1/2 1 X 1/2 1 X 3/4 Hot End onfiguration ode Mullite 1B 1 1E - 1G Alumina 2B 2 2E - 2G Hexoloy 5B - 5E 5H - Open End losed End O L ing Information L 2 8 Instrumentation ynatherm inc Rev. 4 / 12-16

9 Model 461 eramic Tube 1 eramic Tube And Size ode Specify protection tube material and size. Tube Tube Size (O X I) 3/8 X 1/4 11/16 X 7/16 3/4 X 1/2 1 X 1/2 1 X 3/4 Mullite 1B 1 1E - 1G Alumina 2B 2 2E - 2G Hexoloy 5B - 5E 5H - 2 Hot End ode Specify hot end configuration. Hot End onfiguration Open End losed End ode O Bushing 3 ement Bushing ode Specify cement bushing material and size. Bushing Threads (1 X 2) 1/2 X 3/4 1/2 X 1 1/2 X 1.25 arbon Steel 4E 4F 4G Stainless Steel 3E 3F 3G 1 2 L ing Information E 1 L 2 3 Rev. 4 / Instrumentation ynatherm inc 9

10 Model 462 eramic Tube 1 eramic Tube And Size ode Specify protection tube material and size. Tube Tube Size (O X I) 3/8 X 1/4 11/16 X 7/16 3/4 X 1/2 1 X 1/2 1 X 3/4 Mullite 1B 1 1E - 1G Alumina 2B 2 2E - 2G Hexoloy 5B - 5E 5H - 2 Hot End ode Specify hot end configuration. Hot End onfiguration Open End losed End ode O 3 Support Sleeve Size And ode Specify support sleeve size and material. Sleeve Size (1) Support Sleeve arbon Steel SST 316 SST 446 Inconel 601 1/2 NT /4 NT 4E 3E 5E 6E L N 1 ing Information E 6 1 L 2 3 N 10 Instrumentation ynatherm inc Rev. 4 / 12-16

11 Model 463 eramic Tube 1 eramic Tube And Size ode Specify protection tube material and size. Tube Tube Size (O X I) 3/8 X 1/4 11/16 X 7/16 3/4 X 1/2 1 X 1/2 1 X 3/4 Mullite 1B 1 1E - 1G Alumina 2B 2 2E - 2G Hexoloy 5B - 5E 5H - 2 Hot End ode Specify hot end configuration. Hot End onfiguration Open End losed End ode O 3 Support Sleeve Size And ode Specify support sleeve size and material. Sleeve Size (1) Support Sleeve arbon Steel SST 316 SST 446 Inconel 601 1/2 NT /4 NT 4E 3E 5E 6E 4 Weld Bushing And Size ode Specify weld bushing material and size. Size 2 (NT Male) 1/2 3/ arbon Steel A B E F Stainless Steel H I J K L M L Z 1 N ing Information E 6 -J L 2 3 N 4 Z Rev. 4 / Instrumentation ynatherm inc 11