Lista de lucrări. a) 10 lucrări considerate a fi cele mai relevante

Transcription

1 Lista de lucrări a) 10 lucrări considerate a fi cele mai relevante 1) T.F. Marinca, H.F. Chicinaş, B.V. Neamţu, O. Isnard, I. Chicinaş, Structural, thermal and magnetic characteristics of Fe3O4/Ni3Fe composite powder obtained by mechanosynthesis-annealing route, Journal of Alloys and Compounds, 652 (2015) ) T.F. Marinca, B.V. Neamţu, I. Chicinaş, P. Pascuta, Influence of mechanical activation time, annealing and Fe/O ratio on Fe3O4/Fe composites formation from Fe2O3 and Fe powders mixture, Journal of Thermal Analysis and Calorimetry, 118 (2014) ) T.F. Marinca, B.V. Neamţu, I. Chicinaş, O. Isnard, Structural and magnetic characteristics of composite compacts of Fe/Fe3O4 type obtained by sintering, IEEE Transaction on Magnetics, 50(4) (2014) ) T.F. Marinca, B.V. Neamţu, F. Popa, V.F.Tarţa, P. Pascuta, A.F. Takacs, I. Chicinaş, Synthesis and characterization of the NiFe2O4/Ni3Fe nanocomposite powder and compacts obtained by mechanical milling and spark plasma sintering, Applied Surface Science, 285P (2013) ) T.F. Marinca, I. Chicinaş, O. Isnard, Structural and magnetic properties of the copper ferrite obtained by reactive milling and heat treatment, Ceramics International, 39 (2013) ) T.F. Marinca, I. Chicinaş, O. Isnard, V. Popescu, Nanocrystalline/nanosized Ni1-γFe2+γO4 ferrite obtained by contamination with Fe during milling of NiO-Fe2O3 mixture. Structural and magnetic characterization, Journal of the American Ceramic Society, 96 (2013) ) T.F. Marinca, I. Chicinaş, O. Isnard, Synthesis, structural and magnetic characterization of nanocrystalline CuFe2O4 as obtained by a combined method reactive milling, heat treatment and ball milling, Ceramics International, 38 (2012) ) T.F. Marinca, I. Chicinaş, O. Isnard, V. Pop, F. Popa, Synthesis, structural and magnetic characterisation of nanocrystalline nickel ferrite NiFe2O4 obtained by reactive milling, Journal of Alloys and Compounds, 509 (2011) ) V.F. Tarţa, T.F. Marinca, I. Chicinaş, F. Popa, B.V. Neamţu, P. Pascuta, A.F. Takacs, Study on stability of phases in ball milled ZnFe2O4/Fe composite during spark plasma sintering, Materials and Manufacturing Processes, 28 (2013) ) B.V. Neamţu, T. F. Marinca, I. Chicinaş, O. Isnard, F. Popa Structural and magnetic characteristics of Co-based amorphous powders prepared by wet mechanical alloying, Advanced Powder Technology, 26(1) (2015)

2 b) Teza de doctorat Titlul tezei : MATERIALE NANOCOMPOZITE MAGNETICE MOI OBŢINUTE PRIN ALIERE/MĂCINARE MECANICĂ Conducător ştiinţific: prof.dr.ing.fiz. Ionel CHICINAŞ Domeniul: ingineria materialelor Universitatea Tehnică din Cluj-Napoca c) Brevete de invenţie 1) I. Chicinaş, T.F. Marinca, F. Popa, B.V. Neamţu, Pulbere nanostructurată de tipul Permalloy(Supermalloy)/Rhometal si procedeu de obținere, Cerere depusă la OSIM ȋn și publicată cu numărul RO A0. 2) I. Chicinaş, T.F. Marinca, F. Popa, B.V. Neamţu, Pulberi compozite de tipul fe sau aliaj feromagnetic/ferită magnetic moale cu structură de tipul pseudo core-shell și procedeu de obținere, Cerere redactată și înregistrată la OSIM cu numărul Nr. A10083/ d) Cărţi şi capitole în cărţi B.V. Neamțu, T.F. Marinca, F. Popa, Tehnici de analiză a materialelor - Aplicații practice, U.T. Press, Cluj-Napoca, 2015 ISBN e) Articole/studii in extenso, publicate în reviste din fluxul ştiinţific internaţional principal: 37 I. Articole în reviste cotate ISI: 21 1) T.F. Marinca, H.F. Chicinaş, B.V. Neamţu, O. Isnard, I. Chicinaş, Structural, thermal and magnetic characteristics of Fe3O4/Ni3Fe composite powder obtained by mechanosynthesis-annealing route, Journal of Alloys and Compounds, 652 (2015) ) T.F. Marinca, B.V. Neamţu, I. Chicinaş, P. Pascuta, Influence of mechanical activation time, annealing and Fe/O ratio on Fe3O4/Fe composites formation from Fe2O3 and Fe powders mixture, Journal of Thermal Analysis and Calorimetry, 118 (2014) ) T.F. Marinca, B.V. Neamţu, I. Chicinaş, O. Isnard, Synthesis of Fe3O4/Fe nanocomposite powder from Fe2O3 and Fe powder by mechanosynthesis. Structural, thermal and magnetic characterisation, Journal of Alloys and Compounds, 608 (2014) ) T.F. Marinca, B.V. Neamţu, I. Chicinaş, O. Isnard, Structural and magnetic characteristics of composite compacts of Fe/Fe3O4 type obtained by sintering, IEEE Transaction on Magnetics, 50(4) (2014) ) T.F. Marinca, B.V. Neamţu, F. Popa, V.F.Tarţa, P. Pascuta, A.F. Takacs, I. Chicinaş, Synthesis and characterization of the NiFe2O4/Ni3Fe nanocomposite powder and compacts obtained by mechanical milling and spark plasma sintering, Applied Surface Science, 285P (2013)

3 6) T.F. Marinca, I. Chicinaş, O. Isnard, Structural and magnetic properties of the copper ferrite obtained by reactive milling and heat treatment, Ceramics International, 39 (2013) ) T.F. Marinca, I. Chicinaş, O. Isnard, V. Popescu, Nanocrystalline/nanosized Ni1-γFe2+γO4 ferrite obtained by contamination with Fe during milling of NiO-Fe2O3 mixture. Structural and magnetic characterization, Journal of the American Ceramic Society, 96 (2013) ) T.F. Marinca, I. Chicinaş, O. Isnard, Influence of the heat treatment conditions on the formation of CuFe2O4 from mechanical milled precursors oxides, Journal of Thermal Analysis and Calorimetry, 110 (2012) ) T.F. Marinca, I. Chicinaş, O. Isnard, Synthesis, structural and magnetic characterization of nanocrystalline CuFe2O4 as obtained by a combined method reactive milling, heat treatment and ball milling, Ceramics International, 38 (2012) ) T.F. Marinca, I. Chicinaş, O. Isnard, V. Pop, F. Popa, Synthesis, structural and magnetic characterisation of nanocrystalline nickel ferrite NiFe2O4 obtained by reactive milling, Journal of Alloys and Compounds, 509 (2011) ) T.F. Marinca, I. Chicinaş, O. Isnard, B.V. Neamţu, Nanocrystalline/nanosized manganese substituted nickel ferrites - Ni1-xMnxFe2O4 obtained by ceramic-mechanical milling route. Structural, thermal and magnetic investigations, Ceramics International - doi: /j.ceramint ) I. Chicinas T.F. Marinca, F. Popa B.V. Neamțu, Rhometal interface in pseudo-core shell powders like Permalloy/Rhometal type, Applied Surface Science, 358, (2015) ) T.F. Marinca, I. Chicinaş, O. Isnard, B.V. Neamțu, Nanocrystalline/nanosized Fe3O4 particles obtained by annealing and mechanical milling, Optoelectronics and Advanced Materials - Rapid Communications, 9(5-6) (2015) ) B.V. Neamţu, T. F. Marinca, I. Chicinaş, O. Isnard, F. Popa Structural and magnetic characteristics of Co-based amorphous powders prepared by wet mechanical alloying, Advanced Powder Technology, 26(1) (2015) ) B.V. Neamţu, T. F. Marinca, I. Chicinaş, O. Isnard, Structural, magnetic and thermal characterisation of amorphous FINEMET powders prepared by wet mechanical alloying Journal of Alloys and Compounds, 626 (2015) ) I. Chicinaş, T.F. Marinca, B.V. Neamțu, P. Pascuta, V.Pop, Thermal stability of the manganese-nickel mixed ferrite and iron phases in the Mn0.5Ni0.5Fe2O4/Fe composite/nanocomposite powder, Journal of Thermal Analysis and Calorimetry, 118 (2014)

4 17) I. Chicinaş, T.F. Marinca, B.V. Neamţu, F. Popa, O. Isnard, V. Pop, Synthesis, structural and magnetic properties of nanocrystalline/nanosized manganese-nickel ferrite - Mn0.5Ni0.5Fe2O4, IEEE Transaction on Magnetics, 50(4) (2014) ) B.V. Neamţu, T. F. Marinca, I. Chicinaş, O. Isnard, F. Popa, P. Pascuta, Preparation and soft magnetic properties of spark plasma sintered compacts based on Fe-Si-B glassy powder Journal of Alloys and Compounds, 600 (2014) ) B.V. Neamţu, I. Chicinaş, O. Isnard, I. Ciascai, F. Popa, T. F. Marinca, Consolidation and DC magnetic properties of nanocrystalline Supermalloy/iron composite cores prepared by spark plasma sintering, Journal of Magnetism and Magnetic Materials, 353 (2014) ) V.F. Tarţa, T.F. Marinca, I. Chicinaş, F. Popa, B.V. Neamţu, P. Pascuta, A.F. Takacs, Study on stability of phases in ball milled ZnFe2O4/Fe composite during spark plasma sintering, Materials and Manufacturing Processes, 28 (2013) ) T.F. Marinca, I. Chicinaş, O. Isnard, V. Pop, Structural and magnetic properties of nanocrystalline ZnFe2O4 powder synthesized by reactive ball milling, Optoelectronics and Advanced Materials - Rapid Communications, 5 (1) (2011) II. Articole în reviste indexate ISI: 16 22) H.F. Chicinaş, B.V. Neamţu, T.F. Marinca, I. Chicinaş, Synthesis of Fe75Si20-xB5Mx (M=Ti, Ta or Zr) powders by wet mechanical milling, Advanced Engineering Forum, 13 (2015) ) B.V. Neamţu, T.F. Marinca, H.F. Chicinaş,, I. Chicinaş, O. Isnard, Effect of Process Control Agents on the FeSiB Powder Amorphisation by Wet Mechanical Alloying, Advanced Engineering Forum, 13 (2015) ) T.F. Marinca, B.V. Neamţu, I. Chicinaş, O. Isnard, Nanocrystalline/nanosized Fe3O4 powder obtained by mechanosynthesis, Advanced Engineering Forum, 13 (2015) ) T.F. Marinca, B.V. Neamţu, I. Chicinaş, F. Popa, P. Pascuta, Composite compacts of Fe/Fe3O4 type obtained by mechanical milling-sintering-annealing route, Advanced Engineering Forum, 13 (2015) ) T.F. Marinca, B.V. Neamţu, F. Popa, I. Chicinaş, O. Isnard, Composite powder and compacts of iron/iron oxide type produced by mechanosynthesis and reactive sintering, Solid State Phenomena, 216 (2014) ) I. Chicinaş, T.F. Marinca, B.V. Neamţu, F. Popa, O. Isnard, Nanocrystalline/nanosized mixed nickel-manganese ferrites obtained by mechanical milling, Solid State Phenomena, 216 (2014)

5 28) C.D. Stanciu, T.F. Marinca, F. Popa, I. Chicinaş, O. Isnard, Synthesis of the Fe-10%Si nanocrystalline powder by mechanical alloying, Solid State Phenomena, 216 (2014) ) B.V. Neamţu, T. F. Marinca, I. Chicinaş, F. Popa, O. Isnard, Preparation and characterization of amorphous soft magnetic FeSiB powders and spark plasma sintered compacts, Solid State Phenomena, 216 (2014) ) V.F. Tarţa, I. Chicinaş, T.F. Marinca, B.V. Neamţu, F. Popa, C.V. Prică, Synthesis of the nanocrystalline/nanosized NiFe2O4 powder by ceramic method and mechanical milling, Solid State Phenomena, 188 (2012) ) V.F. Tarţa, I. Chicinaş, T.F. Marinca, B.V. Neamţu, F. Popa, Effect of sintering parameters on the properties of ZnFe2O4/α-Fe nanocomposite compacts, Solid State Phenomena, 188 (2012) ) T.F. Marinca, I. Chicinaş, C. Prică, F. Popa, Nickel ferrite powder obtained by high energy reactive ball milling, Materials Science Forum, 672 (2011) ) T.F. Marinca, I. Chicinaş, V. C. Pricǎ, F. Popa, B.V. Neamţu, Zinc Ferrite Powder Synthesized by High Energy Reactive Ball Milling, Materials Science Forum, 672 (2011) ) I. Chicinaş, V. Pop, F. Popa, C.V. Prică, T.F. Marinca, B.V. Neamţu, L.A. Sorcoi Formation of the Hipernik Alloy by Mechanical Alloying, Materials Science Forum, 672 (2011) ) C.V. Prică, T.F. Marinca, F. Popa, I. Chicinaş Ni3Fe Mechanically Alloyed: Shock Mode versus Friction Mode, Materials Science Forum, 672 (2011) ) I. Chicinaş, V. Pop, F. Popa, C. V. Prică, T.F. Marinca, B.V. Neamţu, L.A. Sorcoi Synthesis of the Mümetal Magnetic Powders by Mechanical Alloying, Materials Science Forum, 672 (2011) ) I. Chicinaş, O. Isnard, H. Chiriac, F. Popa, V. Pop, C.V. Prică, B.V. Neamţu, T.F. Marinca, Magnetic and thermomagnetic studies of the formation of the Rhometal powders by high energy mechanical milling, Journal of Physics: Conference Series, 303 (2011) III. Articole indexate în alte baze de date: 1 38) T.F. Marinca, H.F. Chicinaș, B.V. Neamțu, F. Popa, O. Isnard, I. Chicinaș, Nanocrystalline magnetite Fe3O4 particles synthesized by mechanical milling, Studia Universitatis Babes-Bolyai Physica, 60 (1) (2015)

6 f) Publicaţii in extenso, apărute în lucrări ale principalelor conferinţe internaţionale de specialitate: 7 1) I. Chicinaş, T.F. Marinca, F.Popa, B.V. Neamţu, V. Pop, P. Pascuta, Production of Permalloy/Rhometal type nanostructured powders, Presented at Euro PM2014 Congress & Exhibition, Sept. 2014, Salzburg, Austria 2) I. Chicinaş, T.F. Marinca, B.V. Neamţu, F. Popa, V. Pop, O. Isnard, V.F. Tarţa, Producing of NiFe2O4/(metal, alloy) nanocomposite/composite powders and compacts by mechanical milling and spark plasma sintering, Materials Science and Technology Conference and Exhibition 2013, MS&T 2013, Vol. 3 (2013) ) T.F. Marinca, I. Chicinaş, O. Isnard, F. Popa, B.V. Neamţu, Poudre nanocristalline de ferrite de zinc élaborée par broyage réactif, Proc. MATERIAUX2010, oct. 2010, Nantes, France, (2010) CD. 4) T.F. Marinca, I. Chicinaş, O. Isnard, F. Popa, C.V. Prică, V. Pop, Formation de ferrite de nickel par broyage réactif de haute énergie, Proc. MATERIAUX2010, oct. 2010, Nantes, France, (2010) CD. 5) I. Chicinaş, F. Popa, V. Pop, O. Isnard, C.V. Prica, T.F. Marinca, B.V. Neamţu, L.A. Sorcoi Elaboration des alliages magnétiques Rhometal et Hipernik par broyage mécanique de haute énergie, Proc. MATERIAUX2010, oct. 2010, Nantes, France, (2010) CD. 6) T.F. Marinca, I. Chicinaş, F. Popa, C.V. Prică, O. Isnard, A. Sorcoi, Synthesis of ZnFe2O4/α-Fe nanocomposite powders by high energy mechanical milling, Proc. World Powder Metallurgy Congress&Exhibition, PM 2010, oct. 2010, Florence, Italy, Vol. 5 (2010) ) T.F. Marinca, I. Chicinaş, F. Popa, C.V. Prică, O. Isnard, A. Sorcoi, High energy mechanical milling synthesis of NiFe2O4/Supermalloy nanocomposite powders, Proc. World Powder Metallurgy Congress&Exhibition, PM 2010, oct. 2010, Florence, Italy, Vol. 5 (2010) g) Alte lucrări: 31 1) T.F. Marinca, H.F. Chicinaş, B.V. Neamţu, O. Isnard, I. Chicinaş, Fe3O4/Ni3Fe nanocomposite powder obtained by mechanosynthesis-annealing route, Presented at 7 th International Workshop on Amorphous and Nanostructured Magnetic Materials - ANMM 2015, September 2015, Iaşi, România. 2) T.F. Marinca, H.F. Chicinaş, B.V. Neamţu, O. Isnard, P. Pascuta, N. Lupu, G. Stoian, I. Chicinaş, Mechanosynthesis of oleic acid coated Fe3O4 nanoparticles. structural, thermal and magnetic characteristics, Presented at 7 th International Workshop on Amorphous and Nanostructured Magnetic Materials - ANMM 2015, September 2015, Iaşi, România. 6

7 3) I. Chicinaş, T.F. Marinca, F. Popa, B.V. Neamţu, O. Isnard, V. Pop, Pseudo core-shell powders like Permalloy/Rhometal type, Presented at 7 th International Workshop on Amorphous and Nanostructured Magnetic Materials - ANMM 2015, September 2015, Iaşi, România. 4) B.V. Neamţu, H.F. Chicinaş, T.F. Marinca, O. Isnard, O. Pană, I. Chicinaş Amorphisation of Fe-based alloy via wet mechanical alloying assisted by PCA decomposition, Presented at 7 th International Workshop on Amorphous and Nanostructured Magnetic Materials - ANMM 2015, September 2015, Iaşi, România. 5) C. Nicolicescu, M. Criveanu, V. Nicoară, A. Rotaru, F. Popa, T. F. Marinca, Effect of milling time on the thermal behaviour of W/Cu composite powders, Presented at 3 st Central and Eastern European Conference on Thermal Analysis and Calorimetry, CEEC-TAC3, August 2015, Ljubljana, Slovenia. 6) H.F. Chicinaș, T.F. Marinca, B.V. Neamțu,, I. Chicinaș, O. Isnard, Synthesis of soft magnetic composite Fe3O4/Ni3Fe obtained by mechanosynthesis. Effect of milling on the chemical composition, formation of phases, and magnetic properties, 20 th International Conference on Magnetism ICM2015, 5-10 July 2015, Barcelona, Spain. 7) B.V. Neamţu, H.F. Chicinaş, T. F. Marinca, I. Chicinaş, O. Isnard, Preparation of Co-based amorphous powders by wet mechanical alloying. The influence of Si and/or B substitution by Ti and/or Zr over their properties, 20 th International Conference on Magnetism ICM2015, 5-10 July 2015, Barcelona, Spain. 8) T.F. Marinca, B.V. Neamţu, I. Chicinaş, O. Isnard, H.F. Chicinaş, Structural and magnetic characteristics of nanocrystalline iron-magnetite composite powder obtained by mechanosynthesis, 20 th International Conference on Magnetism ICM2015, 5-10 July 2015, Barcelona, Spain. 9) T.F. Marinca, I. Chicinaş, O. Isnard, F.Popa, B.V. Neamţu, Poudres composites des types Fe2O3/Fe et Fe3O4/Fe obtenues par broyage mécanique. Investigations structurale, thermique et magnétique, Presented at Materiaux2014, nov. 2014, Montpellier, France. 10) I. Chicinaş, T.F. Marinca, B.V. Neamţu, F. Popa, V. Pop, O. Isnard, Matériaux nanocomposites/nanostrucurees de type MeFe2O4/(Métal, alliage) obtenus par broyage mécanique de haute énergie et frittage flash, Presented at Materiaux2014, nov. 2014, Montpellier, France. 11) B.V. Neamţu, O. Isnard, I. Chicinaş, F. Popa, T.F. Marinca, Caractérisations structurale, magnétique et thermique de poudres amorphes de type FINEMET préparé par broyage mécanique humide, Presented at Materiaux2014, nov. 2014, Montpellier, France. 7

8 12) I. Chicinaş, T.F. Marinca, F.Popa, B.V. Neamţu, V. Pop, O. Isnard, Production de poudres nanostructurés de type Permalloy/Rhometal, Presented at Materiaux2014, nov. 2014, Montpellier, France. 13) B.V. Neamţu, T.F. Marinca, I. Chicinaş, O. Isnard, V. Pop, P. Pascuta, Fabrication and soft magnetic properties of spark plasma sintered compacts prepared from Fe-Si- B glassy powder, Presented at Soft Magnetic Conference, SMM21, 1-4 sept. 2013, Budapest, Hungary. 14) T.F. Marinca, B.V. Neamţu, F. Popa, I. Chicinaş, O. Isnard, P. Pascuta, Soft magnetic composite compacts of Fe/Fe3O4 type. Synthesis, magnetic and structural investigation, Presented at Joint European Magnetic Symposia, JEMS2013, aug. 2013, Rhodos, Greece. 15) B.V. Neamţu, T.F. Marinca, F. Popa, I. Chicinaş, O. Isnard, P. Păşcuţă, Synthesis and properties of Fe-Si-B amorphous soft magnetic powders produced by mechanical alloying, Presented at Joint European Magnetic Symposia, JEMS2013, aug. 2013, Rhodos, Greece. 16) I. Chicinaş, T.F. Marinca, F. Popa, B.V. Neamţu, V.F. Tarţa, O. Isnard, V. Pop, NiFe2O4/Ni-Fe alloy nanocomposite obtained by mechanical milling and spark plasma sintering, Presented at 8 th International Conference on Materials Science and Engineering, BRAMAT 2013, 28 feb. - 2 mar. 2013, Brașov, Romania. 17) F. Popa I. Chicinas, O. Isnard, B.V. Neamtu, T.F. Marinca, V. Pop, Influence of contamination with iron on the magnetic properties of mechanically alloyed Supermalloy powders, Presented at Joint European Magnetic Symposia, JEMS 2012, 9 14 sept. 2012, Parma, Italy. 18) I. Chicinaş, T.F. Marinca, O. Isnard, V. Pop, F. Popa, B.V. Neamţu, ZnFe2O4/α-Fe soft magnetic nanocomposite powders obtained by mechanical milling, Presented at Joint European Magnetic Symposia, JEMS 2012, 9 14 sept. 2012, Parma, Italy. 19) B.V. Neamţu, I. Chicinaş, I. Ciascai, O. Isnard, H. Chiriac, T.F. Marinca, F. Popa Magnetic properties of spark plasma sintered Ni3Fe powder prepared by mechanical alloying Presented at Joint European Magnetic Symposia, JEMS 2012, 9 14 sept. 2012, Parma, Italy. 20) T.F. Marinca, I. Chicinaş, O. Isnard, F. Popa, B.V. Neamţu, Structural and magnetic properties of CuFe2O4 synthesized by reactive milling and heat treatment, Presented at Joint European Magnetic Symposia, JEMS 2012, 9 14 sept. 2012, Parma, Italy. 21) I. Chicinaş, I. Isnard, V.F. Tarţa, V. Pop, T.F. Marinca, F. Popa, B.V. Neamţu, ZnFe2O4/α-Fe nanocomposite obtained by mechanical milling and sintered by SPS technique, Presented at European Congress and Exhibition on Advanced Materials and Processes, Euromat 2011, Sept. 2011, Montpellier, France. 22) T.F. Marinca, I. Chicinaş, I. Isnard, V. Pop Nanocrystalline soft magnetic ferrites synthesized by reactive milling route, Presented at European Congress and Exhibition on Advanced Materials and Processes, Euromat 2011, Sept. 2011, Montpellier, France. 8

9 23) T.F. Marinca, I. Chicinaş, I. Isnard, V. Pop, Structural, magnetic and electric properties of ZnFe2O4/α-Fe soft magnetic nanocomposite obtained by mechanical milling, Presented at European Congress and Exhibition on Advanced Materials and Processes, Euromat 2011, Sept. 2011, Montpellier, France. 24) T. F. Marinca, I. Chicinaş, O. Isnard, Thermal stability of the NiFe2O4/Fe nanocomposite powders synthesized by ball milling, Presented at 1 st Central and Eastern European Conference on Thermal Analysis and Calorimetry, CEEC-TAC1, 7-10 sept. 2011, Craiova, România. 25) I. Chicinaş, T.F. Marinca, O. Isnard, V. Pop, ZnFe2O4/α-Fe nanocomposite powders obtained by high energy mechanical milling: structural, magnetic and electrical proprieties, Presented at Conferinţa Naţională de Fizică, CNF2010, sept. 2010, Iaşi, România. 26) I. Chicinaş, T.F. Marinca, I. Isnard, V. Pop, F. Popa, Magnetic, electric and structural proprieties of NiFe2O4/Supermalloy nanocomposite powders synthesized by high energy mechanical milling, Presented at Conferinţa Naţională de Fizică, CNF2010, sept. 2010, Iaşi, România. 27) T.F. Marinca, I. Chicinaş, I. Isnard, V. Pop, Cations inversion induced in nanocrystalline spinel zinc ferrite by high energy reactive milling and its thermal stability, Presented at Conferinţa Naţională de Fizică, CNF2010, sept. 2010, Iaşi, România. 28) I. Chicinaş, O. Isnard, H. Chiriac, F. Popa, C.V. Prica, B.V. Neamţu, T.F. Marinca, V. Pop, Hipernik soft magnetic powders obtained by mechanical alloying, Presented at Joint European Magnetic Symposia, JEMS 2010, aug. 2010, Krakaw, Poland. 29) T.F. Marinca, I. Chicinaş, I. Isnard, V. Pop, Magnetic and structural proprieties of nanocrystalline nickel ferrite powder synthesized by high energy reactive ball milling, Presented at Joint European Magnetic Symposia, JEMS 2010, aug. 2010, Krakaw, Poland. 30) T.F. Marinca, I. Chicinaş, O. Isnard, V. Pop, F. Popa, B.V. Neamţu, Zinc ferrite/α-fe soft magnetic nanocomposite synthesized by mechanical milling, Presented at Joint European Magnetic Symposia, JEMS 2010, aug. 2010, Krakaw, Poland. 31) I. Chicinaş, T.F. Marinca, O. Isnard, F. Popa, B.V. Neamţu, V. Pop Structural and magnetic properties of ZnFe2O4 synthesized by reactive ball milling, Presented at International Conference on Magnetism, ICM 2009, iul. 2009, Karlsruhe, Germany. Cluj-Napoca Traian Florin Marinca 9