Safety Data Sheet acc. to 91/155/EEC, 1999/45/EG

Transcription

1 I:\sichdb\SDBMilamE.DOC Page 1 of 5 pages 1. General information on material, composition and company details 1.1 Product specification: Trade name: Klinger Mica Laminate Types/identification: Foil Type MilamH Laminate Type MilamHL Laminate Type MilamPSS130, MilamPSS150, MilamPSS Details of the manufacturer: Manufacturer/supplier: Klinger AG Egliswil, Industrie Nord, CH-5704 Egliswil Phone: +41 (0) , Fax: +41 (0) Emergency phone number: +41 (0) Composition/specification of the components 2.1 Chemical characteristics: Mica, silicone bonded. at PSS, Insert stainless steel AISI Hazardous components:, according to the components included in EC Standard 67/548/EEC CAS# Identification according to EC directive Content Unit Reference code Additional remarks: 3. Particular dangers Particular dangers for human beings and environment: Mineral fibres may cause sensitation. Protective gloves are recommended for handling of reinforced laminates with metal inserts prevent laceration. 4. First aid measures General comment: Inhalation: Skin contact: Eye contact: Ingestion: Medical indications:. induce vomiting.

2 I:\sichdb\SDBMilamE.DOC Page 2 of 5 pages 5. Measures against fire Suitable extinguishing agents: Foam, refractory sand, carbon dioxide, water sprinkler Unsuitable extinguishing agents for safety reasons: Particular dangers arising from the material itself, the treatment thereof and its decomposition products or combustion gases: Special protective equipment:: 6. Measures in case of unintentional release Personal precautionary measures: Ecological protective measures: Method of cleaning: Additional remarks: Improper use and use other than in compliance with the stipulations, e.g. grinding, may produce fine dust. In this case suction and filtration facilities are imperative. 7. Handling and storage 7.1 Handling Safety instructions for handling: Protective gloves are recommended for handling of reinforced laminates with metal inserts prevent laceration. Safety instructions to prevent fire and explosion: 7.2 Storage Requirements for store room and containers: Store in dry area Safety instructions for storage together with other materials (incompatibility): Other storage conditions: Storage class:

3 I:\sichdb\SDBMilamE.DOC Page 3 of 5 pages 8. Permissible exposure limits and personal protective equipment 8.1 Additional remarks on the lay-out of technical installations Thorough ventilation and suction facilities at the workplace are imperative to avoid dust generation while treating the material mechanically. 8.2 Components whose exposure limits at the workplace must be observed CAS# Chemical designation of the material Type of limit Limit value Unit Mica MAK 3 mg/m Personal protective kit Respiratory protection: Mask Mod. P-1 in case of working dust accumulation Hand protection: Gloves Eye protection: Safety glasses in case of dust accumulation Physical protection: Other safety and hygienic measures: Wash hands before meals and before smoking. 9. Physical and chemical properties 9.1. Appearance Form: solid sheet Colour: light to dark Odour: a faint solvent odour may be detectable with the laminates HL and PSS. 9.2 Safety data Factors Value/range of application Unit Process Softening point: Boiling point/boiling range: Melting point/melting range: Flash point: Inflammability: Inflammation point: Spontaneous ignition: Fire stimulating properties: on first exposal to extreme high temperature, very little gas from the binder may ignite briefly. Danger of explosion: Limits of explosion lower limit upper limit Vapour pressure: at 20 C Density: at 20 C 1.9 g/cm 3 ph-value: neutral Distribution coefficient (n-octanol/water) Viscosity: Others:

4 I:\sichdb\SDBMilamE.DOC Page 4 of 5 pages 10. Stability and reactivity Stability: binder undergoes changes of state at about 250 C. Conditions to avoid: Materials to avoid: Hazardous decomposition products: CO, CO2, SiO2 from binder When there is a lack of oxygen, a small amout of formaldehyde and its polymerisation products will be formed as intermediate products. Others: 11. Toxicity Delayed and immediate effects from short- and long-term exposure with mica dust. skin contact: mica dust can involve irritation eye contact: mica dust can involve irritation inhalation mica dust can involve irritation ingestion during mechanical transformations, silicon contacting mica dust can be formed. 12. Ecology No negative ecological effects are known. 13. Waste management 13.1 Product Recommendation: No special measures required, apply state, federal or local regulations Contaminated packaging Recommendation: No special measures required, apply state, federal or local regulations. 14. Transportation

5 I:\sichdb\SDBMilamE.DOC Page 5 of 5 pages 15. Regulations 15.1 Identification according to the EC directive Reference code and danger indication of the product: No designation requirement Dangerous components which are named on the label: 15.2 National regulations 15.3 Further informations 16. Others Further information: The information given in this data sheet is to the best of our knowledge and belief. The statements made describe our products with regard to the safety requirements but do not guarantee the product properties nor are they legally binding. Contact person: Mr. Dr. U. Wegmann Date of issue: December, Signed for and on behalf of KLINGER AG EGLISWIL Dr. U. Wegmann, Managing Director duly authorized