BNR LTD. BELL, SCOTT & CO. LTD.

Transcription

1 Tungsten carbide hole saws, shallow cut Cutting edges: tungsten carbide steel and cast steel, non-ferrous and light metals, plastics, reinforced fabrics, Material thickness: up to 4mm Cutting depth: up to max. 10mm Cutting angle: works standard Right hand cutting Ø mm Ø inch Through Tube Shank Ø dimensions M dimensions mm /8 ~ PG 9 10 R M R R R PG R /4 3/8 10 R R /16 M 20/PG R R /2 10 R /8 PG R Characteristics: R /16 10 R Pilot drill HSS Co R Split point in accordance with DIN 1412C M R High rotational precision R Sturdy construction /16 10 R Hole saw and shank in one piece /32 10 R Triangular shank /8 PG R With cutting-depth limiter /4 10 R Positive chipping angle with /16 10 R specially ground cutting edge /32 10 R Good chip removal /4 10 R Exchangeable centring drill R Regrindable tungsten-carbide R blades R Unsuitable for percussion-drill / R operation R Only slight pressure required to start /16 PG R /2 10 R Drill with light, steady pressure R Avoid pendulum movements while /16 10 R M R Observe table of speeds /8 10 R Use prescribed cooling agents R /16 10 R RUKO tungsten-carbide-tipped hole /4 1 1/4 10 R saws can be used in hand and pillar drills. When employing pillar drills, R use manual advance only R /8 PG R R R /32 10 R M R /2 13 R R R /8 PG R R R /4 13 R R R /8 ~PG R /2 M R R May 2007 Page 25

2 Tungsten carbide hole saws, shallow cut Cutting edges: tungsten carbide Material thickness: up to 4mm Cutting depth: up to max. 10mm Cutting angle: works standard steel and cast steel, non-ferrous and light metals, plastics, reinforced fabrics, Right hand cutting Ø mm Ø inch Through dimensions M Tube dimensions Shank Ø mm R /4 13 R R R R R /4 13 R R R R /8 13 R /2 13 R R Pilot drills for tungsten carbide hole saws, shallow cut Version HSS Co 5 ground blade split point in accordance steel and cast steel, non-ferrous and light metals, plastics, reinforced fabrics, with DIN 1412 C tungsten carbide blade Material Ø mm Length mm For hole saws Ø mm For hole saws cutting depth HSS Co shallow R HSS Co shallow R tungsten carbide tungsten carbide Ejector spring shallow R shallow R R May 2007 Page 26

3 HSS bi-metal hole saws, with varied toothing Through Tube Ø mm Ø inch dimensions M dimensions For arbor holders 14 9/16 A1 / A4 / A5 R /8 ~ PG 9 A1 / A4 / A5 R A1 / A4 / A5 R Cutting edges: HSS 19 3/4 ~ PG 11 3/8 A1 / A4 / A5 R Jacket: special steel 20 A1 / A4 / A5 R Cutting depth: up to max. 38mm (1 1/2") 21 ~ PG 13.5 A1 / A4 / A5 R Cutting teeth: varied toothing 22 7/8 1/2 A1 / A4 / A5 R Right hand cutting 24 15/16 ~ PG 16 A1 / A4 / A5 R Packing unit: individual carton 25 1 A1 / A4 / A5 R /16 A1 / A4 / A5 R /32 A1 / A4 / A5 R /8 ~ PG 21 3/4 A1 / A4 / A5 R /16 A1 / A4 / A5 R /4 A2 / A6 / A7 R A2 / A6 / A7 R /8 1 A2 / A6 / A7 R A2 / A6 / A7 R PG 29 A2 / A6 / A7 R /2 A2 / A6 / A7 R A2 / A6 / A7 R /8 A2 / A6 / A7 R /16 A2 / A6 / A7 R /4 1 1/4 A2 / A6 / A7 R /16 A2 / A6 / A7 R /8 ~ PG 36 A2 / A6 / A7 R /2 A2 / A6 / A7 R A2 / A6 / A7 R /8 PG 42 A2 / A6 / A7 R A2 / A6 / A7 R /4 A2 / A6 / A7 R A2 / A6 / A7 R /8 ~ PG 48 A2 / A6 / A7 R A2 / A6 / A7 R /2 2 A2 / A6 / A7 R A2 / A6 / A7 R /8 A2 / A6 / A7 R A2 / A6 / A7 R /4 A2 / A6 / A7 R /8 A2 / A6 / A7 R /2 A2 / A6 / A7 R /8 A2 / A6 / A7 R /4 A2 / A6 / A7 R /8 A2 / A6 / A7 R /2 A2 / A6 / A7 R /8 3 A2 / A6 / A7 R /4 A2 / A6 / A7 R /8 A2 / A6 / A7 R A2 / A6 / A7 R /2 A2 / A6 / A7 R /4 A2 / A6 / A7 R /8 A2 / A6 / A7 R /2 4 A2 / A6 / A7 R /4 A2 / A6 / A7 R A2 / A6 / A7 R /2 A2 / A6 / A7 R A2 / A6 / A7 R /16 A2 / A6 / A7 R /8 A2 / A6 / A7 R A2 / A6 / A7 R /32 A2 / A6 / A7 R Suitable for unalloyed steel (up to 700 N/mm² strength), non-ferrous and light metals, plastics, plasterboard and light building boards, fibreboard, plywood and wood. Characteristics: High rotational precision Sturdy construction Hole saw and shank in two parts, so hole saws of different diameters can be exchanged and fitted more rapidly A1, A2, A5, A6 arbor with hexagonal shank and A7 arbor with SDS-plus shank A4 arbor with cylindrical shank Positive chipping and cutting angles ensure more aggressive cutting Varied toothing ensures: -smoother cutting -less effort -less vibration and heat production during cutting -up to three times longer tool life The HSS teeth are welded onto a jacket of special steel Good chip removal Slots in the jacket side assist removal of cutouts Exchangeable centring drill Unsuitable for percussion-drill operation Only slight pressure required to start Drill with light, steady pressure Avoid pendulum movements while Observe table of speeds Use prescribed cooling agents RUKO HSS bi-metal hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only. Also suitable for other makes of drill. Prices without arbor. May 2007 Page 27

4 Arbor holders including pilot drill for HSS and HSS Co 8 bi-metal hole saws Packing unit: in individual carton Ø mm Type Shank Ø mm Shank shape Thread A /2" x 20 R A /8" x 18 R A /2" x 20 R A /2" x 20 R A /8" x 18 R A SDS-plus 5/8" x 18 R R Adapter for arbor holders, type A1 / A4 / A5 Packing unit: individual plastic pack Adaptor to support HSS and HSS Co 8 bi-metal hole saws from Ø 32 to Ø 210mm R R Accessories for HSS and HSS Co 8 bi-metal hole saws Packing unit: individual plastic pack Pilot drill HSS, ground, Ø 6.35mm x 102mm and split point in accordance with DIN 1412C (A4) R R Pilot drill HSS, ground, Ø 6.35mm x 82mm and split point in accordance with DIN 1412C (A1 + A2 + A5 + A6 + A7) Extension 300mm, arbors for A1 + A2 R R R Ejector spring R R Sets of HSS bi-metal hole saws in plastic cases Type PK 1 PK2 Ø mm 9 HSS bi-metal hole saws Ø mm R R May 2007 Page 28

5 Sets of HSS bi-metal hole saws in plastic cases Type EK1 EK2 Universal Super Premium Ø mm Ø mm 10 HSS bi-metal hole saws Ø mm 10 HSS bi-metal hole saws Ø mm 15 HSS bi-metal hole saws Ø mm + 2 arbor holders A1 and A2 + 1 Pilot drill HSS Ø 6.35mm x 82mm +1 Extension 300mm, arbors for A1 and A2 R R R R R R Sets of HSS Co 8 bi-metal hole saws in plastic cases Type PK1 PK2 EK1 EK2 Universal Super Premium Ø mm 9 HSS Co 8 bi-metal hole saws Ø mm Ø mm Ø mm 10 HSS Co 8 bi-metal hole saws Ø mm 10 HSS Co 8 bi-metal hole saws Ø mm 15 HSS Co8 bi-metal hole saws Ø mm +2 arbor holders A1 and A2 + 1 Pilot drill HSS Ø 6.35mm x 82mm + 1 Extension 300mm, arbors for A1 and A2 R R R R R R R R R R May 2007 Page 29